Export Video but no option for sound

I would be grateful if anyone could offer any suggestions on how to fix an audio issue with exporting video from Photoshop.
I am choosing the quicktime format however the option for sound is alwas greyed out.  from the animation panel I have the audio enabled and I can hear it when I play back from within Photoshop.
I am using Photoshop CS4 extended on PC Windows 7
Any help or suggestions would be appreciated.
I understand the following -
For audio I need to choose Quicktime format
Photoshop is primarily image editing software (with video capabilities)

Here is a past post, hope this helps.
1. Bill Hunt,  
  Jun 26, 2011 9:12 AM    in reply to J4e8a16n 
Report
JP,
I do not have my CS5 Extended handy, so will go from the Premiere Pro (Adobe's video editor) side of the street. Bear with me on this, as PS-Extended might do things a bit differently.
When one is Exporting an AV file, there are two things that must be set:
Exporting both Audio & Video (in PrPro, these are done via checkboxes in the Export>General dialog screen)
Then, one must set Multiplexing * on the Export>Multiplexing dialog screen, to anything but "None." The choice is usually "DVD."
It's the Multiplexing Tab, that many miss. If set to None, then there will be two separate Export files - one for the Video stream, and one for the Audio stream.
Hope that gets you close, and sorry that I cannot open things up, and give you the exact screens and tabs in PS-Extended.
Hunt
* Multiplexing is the combining of both the Audio & Video streams into a single, discrete file. Multiplexing is usually OFF by default, though in PrPro, it's a "sticky," in that it retains the last setting, so if the user wishes to make a change, they must do so manually, and that setting will then stick, until changed again. The Export of separate files for Audio & Video is most often used, when one is doing the Export to go to a DVD, or BD authoring program, like Adobe Encore. It works best with elemental streams, rather than muxed files, and especially with MPEG Audio.

Similar Messages

  • Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

    Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
    Message was edited by: Hermann Koster
    Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
    Any suggestions or advice?
    Once again thank you very much for your reply.
    Cheers,

    The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS.  This is mainly because the RAM designed to fit with the customized Linux OS's size.
    You can connect to an external HDD via a  USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
    You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
    Hope that helps!!

  • I am trying to subscribe so that I can convert PDF to word. Get so far but only options for address are in USA, I live in England

    I am trying to subscribe so that I can convert PDF to word. Get so far but only options for address are in USA, I live in England

    Hi golfgerald,
    I'm sorry that you're having trouble subscribing. Please take a look in the lower-left corner of the Adobe.com website. Do you see "United Kingdom" listed as the region? If not, please click Change Region, and then choose United Kingdom.
    Did that do the trick?
    Best,
    Sara

  • ATV2 Connected with HDMI for video and fiber optics for Sound but unable to located the fiber optics option in ATV2

    hello everyone, I currently have my ATV2 connected from HDMI to my TV for Audio&Video but I want to run just my HDMI for Video and my Fiber optics cable for my Sound.  I am unable to locate in the settings where I can change my sound to Fiber optics output.
    Thank you
    Steve

    ok so I figured it out.. I just needed to go into my surround sound and select optical out. 

  • Best export option for Sound Designer

    Hi everyone,
    I am working on a new short film and I am working with a Sound Designer and composer.  We want to create a 5.1 mix for the film (which I have never done before).  So I am trying to figure out what would be the best export option for him to work with to make his life easier.
    Providing him with just a ProRes export won't help him match up to my cuts in the time line since he doesn't use FCP X.  So my thought is that we will have matching files and folder structure for both video and audio before I start editing.  But what I am not understanding is once I have a complete rough cut, how do I get him a cut list so that he can totally match up my cuts with the same audio files on his system?
    Any advice?
    Thanks.

    See this pic for an example of how my exports turn out:
    http://www.brettmichaelwiesman.com/temp/qtexport.jpg
    First off, the titling style is not ideal for DV (or DVD). That is, your font should be a bit fatter (or, at least, bold) and perhaps 1-2 point sizes larger. (This is all because the DV codec makes titles look like s--t if the font size is small and narrow)
    Also, for your LiveType files, make sure FCP is interpreting your alpha channel correctly. For every LiveType file placed in your timeline, select it, then press Command-9 to bring up the Item Properties dialog. In the column for Alpha, make sure it says it says Black. If, for instance, it reads Straight, Control-click [right-click] on Straight, then select Black from the contextual menu. You should notice your text 'popping out' a little more. You'll have to re-render, of course.
    Also, in QuickTime Player, press Command-, (that's  + comma) to bring up QT's preferences. Make sure that the box for Use High Quality Video Setting when available is checked. (In order to get this working, it's probably best to set this, then restart QT - or close, then open, all movies). With the High Quality flag always used, your titling should always look better in QT player. (That is, there is no change made to your actual file, but at least when previewing, you'll get a better idea of things)
    After you've made these changes, export as you were (Current Settings) and let us know if you see any improvements.

  • Still image pixel aspect ratio wrong in exported video (but correct in Premiere renders)

    I've saved a targa still image from my footage and added it to the bin. It's properties show as follows:
    Image Size: 1440 x 1080
    Pixel Aspect Ratio: 1.3333
    This correctly matches my sequence settings as I'm working with 1080p widescreen footage.
    The image appears as expected in the Program window both before and after rendering previews. However, once I export my sequence as a video file, the still image is squashed (displaying incorrectly):
    A work around would be to stretch out the still to a width of 1920 in Premiere so that the export displays it back at its normal aspect ratio - which works - but I don't understand why I should have to do this.
    The other solution I found was to go to the bin and 'Modify > Interpret Footage' and although "Use Pixel Aspect Ratio from File" already shows the correct settings, to actively reset it (to the same pixel aspect ratio)  with the 'Conform to' option:
    This works too.
    Surely a bug?
    (using Premiere Pro CC)

    Thanks for the quick reply. But then why does the still's properties (in my bin) show the pixel aspect ratio as 1.3333 (not square pixels, 1.0) and should it not appear incorrectly in both the preview renders and the exported video ? This seems inconsitent to me.

  • My new ipod nano plays videos but there is no sound, why?

    My new iPod nano that plays videos has no sound going along with them. It's not a problem with the iPod, (I don't think) because the sound won't play on iTunes either, yet my music in playing just fine both on my ipod nano and in itunes. I dragged and dropped the video into itunes then I converted the video then used the convert selection for ipod. Why is there no sound? Is there something I am doing wrong? My 30gb ipod did worked just fine when I did it that way but my new ipod nano won't. Is there something else I have to do before I can watch and listen to videos?
    Any help would be greatly appreciated.
    Thanks!
    Becca

    QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
    iPod plays video but not audio of some exported files
    http://docs.info.apple.com/article.html?artnum=302588
    One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
    http://www.squared5.com/
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    http://docs.info.apple.com/article.html?artnum=302758
    GUIDES TO: Converting Video for iPod - Mac & Window
    http://forums.ilounge.com/showthread.php?s=&threadid=123067
    Patrick

  • Export video, only few options

    For exported video, theire is only DPX, H.264 and original version as option.
    And we are not able to choose export size.
    I would like to be able to choose other codecs installed in my machine already...

    keysound
    In version 7, you had 2 export routes, File Menu/Export/Movie and Share/ with choices for Disc, Online, Personal Computer, Mobile Phones and Players, and Tape.
    In version 11, you do not have the File Menu/Export/Movie route, but you do have Publish+Share (the new generation) Share with a vast selection of export choices. I will not go over them, but for now will address only two of your points in your post.
    1. As for QuickTime. Make sure that you have the latest version of QuickTime. QuickTime installation on the computer with Premiere Elements is required to see the QuickTime choices. Assuming that you have done that, then set an appropriate choice for Presets in the export dialog and then go under the Advanced Button/Video Tab, Audio Tab, and, if applicable other of the preset to take control of your video and audio settings.
    2. SG has already suggested to you a choice for a file to be uploaded to YouTube at the YouTube web site that should give you best results.
    3. But, as an example, here is how you get your old "Windows Media 720p25" export from Premiere Elements 11 Windows.
    Publish+Share
    Computer
    Windows Media
    Presets = 720 x 576 16x9 25
    then under the Advanced Button/Video Tab of that preset, set as follows
    You have full control over those settings. The bottom which is not visible in the screenshot shows "Average Video Bitrate = 1500 kbps (aka Kbps and representing kilobits per second).
    Please review.
    Thanks.
    ATR

  • IPhone4 Dock Connector Not Showing As Option For Sound Output

    Hey All,
    I'm using an iPhone 4 Dock Connector to output sound (via 3.5 mm cable) to a stereo.  This has been working for over 5 months, but all of a sudden it doesn't show up as an option for output from the AirPlay button.
    I tried a friend's 4S and it worked for him.  I also cleaned out the pin connector area on the iPhone as there was a small amount of lint in there (from being in my pocket), but that didn't fix the problem either.
    Any suggestions would be welcomed.
    Thanks!

    Maybe:
    http://www.strayed.co.uk/2013/06/27/how-to-fix-mac-mini-hdmi-audio-output-issue/
    Next try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • MY I POD PLAYS VIDEOS BUT THERE ISNT ANY SOUND aNY IDEAS ON HOW TO FIX?

    HOW DO YOU GET SOUND TO PLAY ON VIDEO CLIPS?

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    Videora is one, and there are others.
    http://www.videora.com/en-us/Converter/
    Search the iPod video forum for other recommendations, but beware of spammers trying to sell you their own product.
    And may we ask you to turn off your caps lock? It's considered shouting.
    Incidentally, the iPod video forum is here.
    http://discussions.apple.com/forum.jspa?forumID=808

  • Quality options for sound file conversions

    Before purchasing this application I'd like to know more about the quality of the algorithms used for conversions such as
    Dither options for bit depth conversion
    Conversion of sample Rates
    as well as whether LE supports 96K Hz and 192K Hz recording.
    Thanks.

    Hi,
    I am not 100% sure about LE, but usually it is the same basic program as Logic Pro, which can do all these things. You have 1 POW-r dithering and 2 POW-r noise shaping algorithms, and sample rates up to 192 kHz (which i won't recommend in any case, though, unless you have a bat's ears). 192kHz drains heavily on the system ressources, and you should have a very good reason to make recordings with such a high sample rate. Usually, 44.1 kHz (or 48kHz for video production) is the maximum even a well trained and critical ear will hear, and the reasons for going higher than that are of a more academical nature. But i guess you know this discussion?
    Greetings,
    Fox

  • I CAN DOWNLOAD VIDEO BUT IT HAS NO SOUND

    I CAN DOWNLOAD VIDEOS BUT WHEN I WATCH THEM THEY HAVE NO SOUND AT ALL,WHAT IS WRONG?

    Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
    (29960)

  • IPhone 5 Pre-order but no option for AppleCare?

    Hi,
    I don't know if this is the right place to ask this, sorry if I'm wrong!
    I've pre-ordered my iPhone 5 from my carrier (Orange UK) but there was no option for AppleCare. Am I able to purchase this from the Apple Store once it has arrived?
    Thanks, Ben

    Yes, once you get the phone take it to an Apple Retail Store or call AppleCare in your country for your options.

  • Cannot Export/Share video, but the options are available

    I have created my first movie with FCPX and now i am ready to export/share. All of the share export options are available in the share tab but when I click export i get the colorful pinwheel for a quick second and then nothing happens can someone please help me out with this.

    ThuhKoz wrote:
    So lol what was I to do erase the contents of the computer when I purchased it lol.
    Yes, that i exactly what you, or better yet, the person who sold the computer to you, should have done.
    That is aside from the point nor does it have anything to do with my issue.
    No, it is not. It is the point. The fact is that since you don't own a license to use the software you cannot update it and the version you have is not compatible with the current OS.

  • 80 gb ipod will play my videos but there is no sound

    i read the answer to why it doesnt have sound and the solution to the answer and someone said that i have to use a different converter so i chose one from the ones that this one guy listed on this forum but after that how do i transfer the video from the new converter program to the ipod? im using mpeg streamclip do i have to export to quicktime or do i have to convert to mpeg? I'm so lost and confused and frustated please help.
      Windows XP  

    Im also having the same problem and would like a solution.

Maybe you are looking for

  • Moving root filesystem to another hard drive

    Hi everyone, I've been using Arch Linux for a few months now and it is by far my favorite Linux distribution. I currently have Arch on an old Pentium III, with a whopping 20 GB IDE hard drive. I'm building a new computer, and want to use a larger 160

  • Missing pages in PDF export

    In Indesign CS4, when I export a 48 page document to PDF the last few pages are always missing. I've trying anything but I can't make it print the whole document.

  • 2nd HDD that doesn't refresh

    Hello, I have a SSD in my main MBP bay and a HDD in the optical bay. Sometimes, it looks like my MBP lose the connection to the HDD. The drive is there but when I look at folders from Finder, I get endless spinning wheel at the bottom right of the fi

  • Listen on one port, service request on multiple servers

    we are migrating off oc4j to Weblogic 10.3. One of the things that we really really liked about oc4j was the ability to distribute our applications across multiple JVMs, but refer to any of the apps with the same hostname and port; this meant that we

  • ISA order.jsp; message and validation for "Your reference" field

    Hi Everyone, I am new to ISA and working on java program to add message to "Your Reference" field in order.jsp page if this field is empty and clicked on "Check Out" button and user need to remain in the same page until user enters information in thi