Export with Metadata does not write EXIF Lens & GPS info

I use the Olympus E-3.
I've worked an entire project with Aperture 2 (now at 2.1.2), only to find out eventually that when exporting, aperture does not write the Lens info, and GPS section of the EXIF. This is bread and butter for me.
Did a search in the forum, and there was 1 other who encounter the same problem..
http://www.trick77.com/2009/02/01/aperture-doesnt-export-all-exif-header-info/
the workaround was to copy EXIF from the original file, using Exiftool with GUI on windowsXP. The result being that Adobe bridge and LR can read, while aperture cannot read.

I also encounterd this annoying problem... I just posted another message about this...

Similar Messages

Publish to DVD says it completes, does not write the ISO file in version 13.

When I publish to DVD and select ISO it says it completes but it does not write the ISO file in version 13.

apsteinmetz
The DVD disc which is labelled 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc which is labelled 8.5 GB/240 minutes is in reality 7.95 GB.
What version of Premiere Elements and on what computer operating system is it running? Can we assume 13/13.1 on Windows 8.1 64 bit?
What are you doing, a burn to disc DVD-VIDEO standard or widescreen on DVD disc or burn to disc AVCHD on DVD disc?
When you get to the burn dialog (and you have your disc in the burner tray), what does the Quality area of the burn dialog show for Space Required and Bitrate with and without a check mark next to "Fit Contents to Available Space"?
Or, can you do burn to Folder (4.7 GB) and/or burn to ISO Image (4.7 GB)? Are your successful burn to .iso files under 1 GB in file size?
Please quantitate "...shortening the timeline dramatically".
Thank you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

FINAL EXPORT / MIXDOWN FONCTION does not work. The Output Wave Resulting is a total silence?

AUDITION FINAL EXPORT / MIXDOWN FONCTION does NOT ever work
The Output Wave Resulting is a TOTAL SILENCE - NO SOUND AT ALL
Bought & registered Program act as an expired DEMO...
The result is a wave with a completely flat HORIZONTAL LINE of pure $300.00 rip off of SILENCE
Even after many clean reinstallations AUDITION never is able to do a Final Mixdown with any Sound in it.
A AUDITION Support Technician cleaned up during 1 hour about 15 secret hidden Adobe files in the Windows XP System.
After this clean up the AUDITION program functionned ONCE! Once it was able to output a Final Mixdown with sound in it.
That never occured again after. I have a very standard very well maintained Windows XP computer.
My understanding & the experience with the Adobe Support Technician prooves that the problem is the deeply hidden spy files of Adobe who erroneously turn my bought & registered program into an expired DEMO. I have reported the problem numerous times to Adobe, & everytime I talk to support people at Adobe, they tell me they have never heard about this problem, when I already had reported it MANY times at the Adobe Tech Support department !!!
I can only draw the conclusion Adobe is trying to hide this problem away by pretending they have never heard about it.. ?
Anybody have had a similar AUDITION / DEPRESSION nightmare & found a solution ?

Astraelia wrote:
Audition is the first & only program easely accessible for musicians who record themselves without having the expertise of a sound technician handling the recording operations. This is certainly by far, the greatest quality of Audition.
I would term Audition to be the very first & only recording program (on PC) conceived for musicians. All the others Audio Logic, Q Base ect. are conceived for professionnal recording engineers.
You seem to have a rather strange conception of Audition, I must say. Most musicians want it to do rather more than it does. It wasn't conceived for musicians at all really - it was originally designed to be just an editor, to which the functions of a multitrack tape recorder were added. Its primary use is professional - always has been, mainly by radio stations. Just about every station in the world has at least one copy, and some larger ones like the BBC have rather a lot more... and I'd say that it was the likes of Cubase and Logic that are conceived for musicians, not Audition. It's also used by a lot of Mastering studios, even though they won't admit it. The primary reason for it being in Adobe's Creative Suite is because it's getting more and more integrated with the video programs in it - nothing to do with music at all.
I'm afraid that whether you like it or not, Audition is marketed towards people who do know what they're doing, by and large. That's why it behaves the way it does, and why you do really need to be at least a bit of a technician to use it effectively. And I'm still trying to think whether I know of any guitarists at all who use amplifiers and who don't understand at least the basics of how a mixer works, but I'm afraid that I can't think of any. I'm not going to say that it's common knowledge, but I don't think it's that rare either.

My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

iCloud will not sycn a calendar from an external source. In order to use iCloud to sync it, you would have to move it to iCloud and stop using Google. I know how to do that on a Mac, but I'm not sure how to do it on a PC. If you're using Outlook, I suspect you export it as an .ics file to your desktop, then import it to the iCloud account in Outlook. I'm sure you could use Google to find the specific steps.
However, there's really no reason not to just use Google to sync your calendar across your devices. Instead, just continue to use Goole calendar on all your devices and they should stay in sync. Take a look at this video: http://www.youtube.com/watch?v=C0Jj0KFgbYI.

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

Sync z30 with PC does not transfer data to the PC

i've installed BBlink in a PC with windows 7 and the contacts/calendar sync with outlook does not go well. It apears a message that sync is complete but no dta as been trasfered to the PC

Try syncing only Calendar, then try Contacts.
Or: http://helpblog.blackberry.com/2013/02/how-to-setup-outlook-to-wirelessly-synchronize-your-contacts-...

Photo clicked with flash does not give clear image

photo clicked with flash does not give clear image

I did some more testing with this, and it appears to be a Gmail problem with iOS iPhoto.
I called Apple support, and this issue was escalated to engeneering.
When sending photos from iPhoto for iOS via Gmail from the iOS device, only the small and medium sized photos can be opened in Mail on the iOS device. The large and original photos do not open in Mail.
This occured across different devices I tested, including iPad 2, 3, and 2 separate iPhone 4S devices. All were updated to the lastest firmware. iPhoto was uninstalled, and reinstalled.
When sending and receiving photos from iPhoto for iOS via iCloud me.com email servers, all the photos of different sizes could be opened in Mail fine on the iOS devices.
It appears that Gmail servers somehow change the way the photos are encoded, and make them not viewable on the iOS device. Very disappointing, since the native Mail program has no problem, and photos sent via gmail or other are fine.
Another iPhoto for iOS glitch!

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you.

Serial number provided with download does not work, now what?

serial number provided with download does not work, now what?

Chrish29593217 you are welcome to contact our directly at Contact Customer Care. What Adobe software title are you facing difficulties with?

My key board Sound while I am writing and the letter S doeS not write in lower caSe

My key board Sound while I am writing and the letter S doeS not write in lower caSe

PleaSe reply. I am french, the dictation doeS not underStand my accent

I own a PDF EXPORT, but it does not appear on Acrobat DC

I own a PDF EXPORT, but it does not appear on Acrobat DC

We need to know what Mac you are using and what version of OS X, then we can get your question transferred to the correct forum.

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people :(

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people

There is no way to export Faces information.
I'm not sure why you would do this:
If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again,
If space is an issue then move the whole Library to an external drive:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Setup.exe fails, folder " "does not contain a valid media info file 'mediainfo.xml'"

I'm trying to run the SQL Server R2 setup.exe, and all I get is a command window popping up briefly, then nothing.
This actually affects all SQL Installers that I have on my machine:
2008R2
2012
SSDT BI Pack for VS2012
If I run the setup.exe from the command line, I get this:
An error occurred during the SQL Server 2008 R2 Setup operation
Error result: -2067529698
Result facility code: 1220
Result error code: 30
For more information, review SQL Server R2 Setup Logs in your temp folder
The contents of that log file are:
04/04/2014 10:54:34.489 ======================================================================
04/04/2014 10:54:34.510 Setup launched
04/04/2014 10:54:34.541 Attempting to determine media source
04/04/2014 10:54:34.558 Media source value not specified on command line argument.
04/04/2014 10:54:34.574 Setup is launched from media directly so default the value to the current folder.
04/04/2014 10:54:34.591 Media source: C:\SQL Server Installers\2008 R2\
04/04/2014 10:54:34.608 Attempt to determine media layout based on file 'C:\SQL Server Installers\2008 R2\mediainfo.xml'.
04/04/2014 10:54:34.627 The folder 'C:\SQL Server Installers\2008 R2\' does not contain a valid media info file 'mediainfo.xml'.
04/04/2014 10:54:34.649 Setup closed with exit code: 0x84C4001E
04/04/2014 10:54:34.677 ======================================================================
I've checked 1000 times that the folder DOES contain a mediainfo.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<MediaInfo>
<Properties>
<Property Id="MediaLayout" Value="Full" />
</Properties>
</MediaInfo>
I've seen a few suggestions elsewhere in search results, but nothing has worked so far.
I've previously run the 2008R2 installer and the 2012 installer without problems, so I'm not sure what has changed, or how to get round it.
I'm running on Windows 7 Enterprise SP1, 64 bit with up-to-date Windows Updates.
Any help would be very much appreciated.

In addition to Alberto’s suggestion:
Validate the setup media is not corrupt.
http://thesqldude.com/2012/01/27/sql-server-setup-how-to-validate-downloaded-imagemedia-before-installation
Install .net framework 3.5 and 4.0. Repair them, if already installed.
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful.

Export with Metadata does not write EXIF Lens & GPS info

Similar Messages

Maybe you are looking for