Export with transparent background and opacity

Apologies if these questions are a little basic , but taking my first steps in motion after playing with imovie , FCE and live type for a while
I have started to get a rough idea of motions capabilities but a couple of questions still are puzzling me .
In live type I created graphics , lower thirds etc with an alpha (transparent background) , for use in PIC in PIC in I movie , how do I do this in Motion , everything saved comes up with a background colour despite my canvas being set to transparent ?
Also opacity does not seem to show up at all , all my saved movies with layers with opacity changes (ie not 100%) show those layers as solids with no fading .
Any ideas where I am going wrong ?
Any answers or advice gratefully received with thanks

When you Share your creation you must select a movie standard with transparency - in Motion 4 you selected any option with Millions of Colors+ where the + was transparency.
In Motion 5 if you have transparency selected for your background already then when you export select "Current Settings" on the Export drop down selection which is normally default.
Alan

Similar Messages

Help export the graphic with transparent background and not braking the quality

hi I'd like some help please if its possible.
I've created a monitor graphic in Fireworks that looks like iMac and I would like to export it with transparent background.
the jpeg format looks great with no damage to the graphic at all but I can't have transparent background, although I changed the canvas fill to none. the png-8 format can apply transparent background, but damages the graphic.
Here are the previews
1st - the png-8 format
2nd - thejpeg format
A ny ideas on how I can export the graphic with transparent background and not braking the quality??

Fireworks questions are best answered at this link:
<http://forums.adobe.com/community/fireworks/fireworks_general>
Good luck.

Export with Transparent Background

I do realize this has been asked again and again. Just making a reality check. I created a lower third. Time and time again the import into Final Cut Pro was on a solid black background instead of a transparency.
I followed every post and followed the directions - with no success.
Finally I exported my Motion lower third as a Template. The effect appears as a Generator in Final Cut. When I use the created Generator in my timeline the lower third has a proper transparency and works properly.
Is that really the only way to import a Motion graphic with transparent background?? Yes, I did try creating a Movie in ProRes 4444, my project does have a transparent background selected, etc. I feel as if I am missing something.

Much appreciated :-)
I purchased the lower third from Videohive. It has the basic graphic but lacks titles. While I was watching Motion tuturials, I thought I would customize the lower third with a fancy text animation.
I tried a few experiments based on what you said. I see now.
So it appears that even though my proxy media lacks the alpha channel and does not display with a transparency, the moment I switch FCP to view Optimized/Original media, the transparency works correctly.
So I assume I can still use proxy media (if needed) and ignore the lack of transparency until my final render. As long as I am exporting from Motion using ProRes 4444 it should work correctly.
Does that reasoning make sense?
Looking at many posts across the internet, I think this is the very issue that has tripped up many people.
Thank you for your helpful comment. I was going nuts trying to figure it out.

How to export animated gif with transparent background and glow effect?

I've been having issues lately with creating animated gifs in flash. I finally figured out a way to export a gif with a transparent background but I'm now having an issue with it again because I'm using a glow effect. When the gif is exported the glow effect changes into a very poor quality and becomes less of a glow and more like a solid color. I've even exported a png sequence from flash and put it into photoshop then created a gif from there but I'm still having the same issue. Is there anyway I can properly export this in gif form so the quality is the same as when I test it in flash?
I've provided an image of what my issue looks like and the settings (I've messed around with the settings and this is the best I can come up with) . This is in photoshop but the result is similar in flash. The left one is what it originally looks like and the right is what it will look like after exporting. As you can see as I said before the glow changes into more of a solid color kind of like a border. Any help would be greatly appreciated, thanks in advance!

A GIF is limited to 256 colors while a glow effect likely wants to tie up thousands (let's just say 'lots') of variations of tone.

How to Export with Transparent Background

I have created a logo in Freehand 10, and I need to export it
as an EPS with a transparent background to place in an InDesign
document. How do I export the file with a transparent background?
Thanks!
-Elisha

> Please excuse my lack of experience, but can you please
explain what you mean
> by "without screen image"?
In general contents of eps files (encapsulated postscript)
cannot be viewed with layout programs and alike. Therefore a screen
image must be included for placing. When the document is printed to
a postscript printer or exported as pdf the screen image is omitted
and the postscript code is used. In this case it is not 'What you
see is what you get' but "What you get is what you can't see'.
In Windows the screen image has always been a opaque bitmap
image but in mac screen image can be 'clipped'. In both platforms,
however, the postscript output is the same i.e. without background.
> I did try exporting as Illustrator 7, but it only came
in as a grey box in
> InDesign. I'm waiting on approval to purchase the
upgrade to Illustrator CS3.
I'm not sure if InDesign CS2 can show contents of eps files,
both Mac and Windows. I just tried exporting eps and ai from
FreeHand and they worked well in Windows InDesign CS3.
Usually eps file without screen image appear as white box and
all the images as grey boxes if Disply Performance is set to Fast
Disply in InDesign. So check InDesign display settings.
Also try to export eps with a screen image.
If the logo is simple with just outline objects it can be
copypasted into InDesign as well. In FreeHand 'copy special' and
select the clipboard format.
Jukka

Using animated gifs with transparent background.

Hi guys,
Keynotes 6.2.
I have been onto apple support with this problem.
I add a transparent animated gif to my project.
It show as a movie correctly in the presentation but when exported as quicktime or HTML the movies fail.
We eventually found out that quicktime does not support animated gifs. ( support.apple.com/kb/ht3775 )
So I exported the animation onto a folder with all the frames separately and brought them into final cut pro.
I then followed these tutorials on how to export with transparent background. ( http://provideocoalition.com/mspencer/video/fcp-x-and-alpha-channels and http://www.larryjordan.biz/fcp-export-transparency ).
I now have a quicktime movie that if I bring back into Final Cut Pro it has a transparent background.
However when I bring into keynotes it still has a black background. (presumably keynotes does not recognise the Apple Prores 444).
Any ideas how I can achieve what I need. ?
I am using a program called crazytalk animator and can output with transparent background. Animated Gif or a series of image stills BMP, JPEG, TGA or PNG.
Cheers
SteveW

This has been an ongoing issue for me since I switched from Powerpoint to Keynote. Most of the animated gifs with transparent backgrounds that I used with Powerpoint are no longer transparent in Keynote. You may want to search for those earlier threads on this topic...
To summarize: I've had to open up my animated gifs in After Effects and use the Color Key effect to restore transparency, with mixed success.
Good luck!

Video with Transparent background

Hi I am trying to create a video through Adobe Premiere Elemements 10 that has a transparent background.
I need it to be in .FLV, .SWF or .MP4 format.
I have created the alpha etc but i think i am not exporting it correctly.
Can anyone explain the steps for creating the video with transparent background and how to export it for those file types please?
thanks.

I've not used the software, as I said a quick google threw it up. From looking at their further screens (http://www.increditools.com/flash_video_studio/features.php#flash8alpha) and (http://www.increditools.com/flash_video_studio/samples.php#flash8alpha) a probable workflow would be to create an original in PRE against your green screen and export this as DV (for standard resolution) or HDV (for HiDef). Once in the Flash software it is probably then just a case of using an eyedropper to turn your green screen transparent.
However your best option would be to install it and play around. Looking at their FAQ, similarly to the PRE trial, it installs as a trial version that will place a watermark across your finished video.
If you do try it out please be sure to post back here about its effectiveness - it may help others.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Fancy zoom pics with transparent background

hello,
i have successfully setup fancy zoom in my iweb site (based on the various tutorials found on the web), but there is one problem i'm having. the pics i'm using are .png with transparent background and the background renders properly in safari. however in firefox the background always shows as white. i have double checked my pics and i believe they are fine and again in safari the background renders transparent, but i can't figure out what's causing the background to show white in firefox? i'm guessing it's something in the css maybe but i'm not sure. any ideas at all? i have noticed some people posting in the forum regarding fancy zoom so hopefully someone know... note: the zooming part is working fine in either browser...
thanks,
rick

I love you!!!
Well, you know what I mean.
It worked, thank you, thank you, thank you.
I figured it was a simple solution, and it was. Thanks Varkgirl.

How can I export a file with transparent background?

Hi all,
I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
I'm still learning so I am stuck here. How can I export a file with transparent background?

If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

Export project with Transparent Background

I need to export a Motion project with no solid color background and then import the .MOV into FCP to layer on top of preexisting footage. In project properties I have the transparent checked, but it still exports with a black background. Anyone know of a solution for this?

I cannot get a choice to set the background as transparent. I click edit>project properties and then the background color only offers colors, transparent is never a choice. I have set the color to black and then moved the slider and I have exported it on 100% and 0% and I still get the same results. I am exporting as an lossless+alpha and under the options I have selected a quicktime movie as the Kind and Animation as the Compressor. I have tried every possible combination and cannot get the project to export with a transparent background and like I said when I go into project properties there is no option for a transparent background, only colors.

Export locally png with transparent background

Is it possible to use Ps touch to remove the background from jpeg images and export them locally as png with transparent background (reducing the size of the picture)? I would need to use this feature to create more keynotetouch-friendly images.

Yes. That's possible. You can export a PSTouch project as png to the Camera Roll....and there are other channels as well where this is possible, like "Share By E-mail" , "Send to iTunes" etc.
Those options are accesible via the Share menu (see attached screenshot) as part of the PSTouch project organizer

Masking and clip art with transparent backgrounds

I'm new to iWeb and am creating a travel blog. So far love the simplicity of it. However, when I try to add clip art type images or graphics with transparent backgrounds I always get a white border around them. I have tried to mask or crop the border out but no dice. Any help?!
Also, if anyone can recommend a good source for travel or photo related clip art let me know. The iWeb "Roadtrip" template seems to have some cute items - maps, scissors, tape, etc. - but there is not much there.
Thanks everyone.

Welcome to the Apple Discussions. That's the default border for added image files. Go to the Inspector/Graphic pane and take off the frame/stroke that is added by default.
Click to view full size
Be sure to post a request to remove that default border at http://www.apple.com/feedback/iweb.html. The more complaints the better.
OT

Saving image and layer separately with transparent background

I have a photo with a layer and I am trying to save two images (main photo and layer) with transparent background. I am able to save the main photo with transparent background but somehow not able to save the layer with transparent background despite selecting the option while saving as PNG. Any help will be appreciated?

OK... I'm probably not being clear.
When I import the PDF, I get a typical architect's line drawing as shown below. So the background is displaying as white. In Corel, when you save a GIF or a PNG, you can specify that -everything- that is the 'background colour' is rendered as transparent. IOW: there's no need to erase the 'white' pixels; they are auto-magically converted to transparent.
But in PS (CS4), no matter what I try, the rendered PNG or GIFs show as white, rather than transparent.
Is there a way to have this same behaviour in PS? Or do I first have to use the erase or background erase tools to get rid of the white?

Unable to open a new page with transparent background.

I must have hit something (or maybe several things), because suddenly I can't open a new page in Photoshop (CS2). I can see it's picking up the white background color (from the lower left corner of the tool menu), but I can't figure out how to change it. Also noticed that my camera is suddenly automatically savings pix as jpgs (instead of tiffs) which I think I read somewhere prevents removing the white background color . . . but even if I start by trying to create an empty transparent background and pasting my graphic into it (which is what I usually do), it still loads as a white one.
After fighting with the software for the past 2 hours, maybe I'm just too confused to see the obvious. I do know how to get a transparent background when all is running smoothly. (Have been doing it for years, without running into problems.) It's figurng out what the problem is tonight that has me running in circles. The answer probably is staring me in the face, but if it is, I can't see it. I need help . . . PLEASE!

Yes. When I select all and edit/clear the screen stays white.
Unfortuantely, it alsois not allowing me to grab a screen shot. I've tried both keystrokes and "Grab" (in Application Utilities.)
But the image in the layers panel is easy to describe.
1) When I open a new PS document and click on transparent, the icon is a small rectangle with a double line border that has a white space midway on each side.
Whether it is active or hidden, the box next to it just says "layer 1" (i.e., not background.
In this mode, the Transparency & Gamut settings show the following:
Grid Size Medium
Grid Colors Light
Below that are 2 empty boxes
In the bottom section, Gamut Warning shows a darkened out Square. A both ends of the Opacity bar (1% and 100%) it remains unchanged.
When I add an image, it does not add a layer. The icon just changes to a thumbnail of the image.
If I don't change them, the Transparency & Gamut pane remains unchanged.
point, I'm running out of time, so would switch to that other Adobe Application (with fewer options and tools, which came on the same disk as another Adobe graphic program ), but can't search for it on my computer because I don't remember it's name. But since it's not in the application folder, if it was not compatible with System 10, I may have removed it. By any chance do you know which application I'm referring to?

Can I turn greenscreen video into video with transparent background (instead of default black backgr

Can I turn greenscreen video into video with transparent background to overlay on another video in another program. probably export as avi. I know I can in after effects but comfortable with premiere. basically want to turn the greenscreen from a black to transparent background ppro cs6 windows
[ email address removed by forum host ]

Harm is correct. It would be better to edit in the program where you keyed out the green. However, if you really must ...
DPX is one file per frame. While you may not be able to open it from Windows, it is only because Windwos has not been told to open them in Photoshop.
The whole point of the DPX file is to have a visually lossless storage of your frames that is designed to be used between applications (just what you want to do): http://en.wikipedia.org/wiki/Digital_Picture_Exchange
However, if you prefer to use another option that you are more comfortable with, you can use PNG.
Or...
If you insist on a single video, use the Animation codec for Quicktime.
In any case, you need a picture format or video CODEC that can store an Alpha Channel.
Or.....
Export the video with the black and use a Luma key in the next application.
Or ...
Export the video with the black, and then export a video of just the alpha channel as a blabk and white image where black is transparent when used as a track matte, and then in the next application use the video of the alpha channel as a track matte.
Since you haven't said what the other application is or why you want to use it, we are having a little trouble offering a specific solution.

Export with transparent background and opacity

Similar Messages

Maybe you are looking for