Export without artboard

Hey all,
If i export a file without using artboards there is no way to set crop marks? I have hundreds of images that i made in CS4 and they exist with single artboards (obviously), but now when i export the image with the artboard i get -01 added to the file name. This is ridiculous if i only have one artboard. How can i export perfectly without adding the -01? if i don't use the artboards then i get space around the image.
Best,
T

What I do is pretend the file I'm working on is the old Illustrator EPS, and handle it accordingly. Because if you export say a JPG of the illustrator file, without the artboard radio button selected in the export dialog, the image exported will be defined by the extremities of the existing artwork.
Just forget the Artboard thingie for a sec. and create an unstroaked, unfilled box where you want the extremities of the file to be. Perhaps .125" larger then the artwork. Now try the export. You can, if you need to, take this unfilled and unstroaked box and select it, then go Effect>Crop Marks. This will give you the ability to export the entire art with crop marks and bleeds.

Similar Messages

Export Multi-artboard filename without prefix slash

My mac OS version is OS X 10.10.2.
Since i update the Illustrator from cc to cc2014,
when i export multi-artboard images,
the artboard image filename will be automatic added a slash mark in the first character position,
like "/someprefix_artboardname.png"
The correct filename should be"someprefix_artboardname.png".
It won't happened in Illustrator CC.

I have been using this method successfully for quite some time with these exact files, only in the last few days has this problem shown up.
When I originally made the template in indesign, I imported the pdf, showed import options, and linked the pages to the same page number in the pdf. 1 to 1, 2 to 2, etc. My original thought was that this setting had been lost, so deleted the linked pdf and imported it again to try to get the 1 to 1 link. However, that did not change anything and I noticed that the page that shows up by itself in the pdf is almost always page 2, not page 1. If the page-to-page connection had been lost, all of the pages in indesign would be linking to page 1 as is the default behavior for linked pdfs.
Also, I thought that the save issue would be on the illustrator side too, so I tried resaving it but that didn't work either. The only way that I can get the file to work is if I remake it completely and save over the old file.
Now, I know that you're most likely thinking that this is an illustrator issue, but I don't think that it is one or the other, but rather both of them. The screenshots that I attached above are not the only way this error manifests itself. Sometimes the pdf looks right in acrobat, but once it is linked it displays with a transparency, shows only a few of the pages, or shows none at all.
I'm probably going in circles here, but I cannot figure out which program is the cause of the error or if there are two different issues that are happening at the same time.

How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

This has been discussed a few times, and here is a summary of the usual solutions.
http://forums.adobe.com/message/2989508#2989508
What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg, filename-02.jpg, and then everytime you use export artbaords those names will replace.
I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

Exporting Multiple Artboards of Different Formats Easily

I have one document with multiple artboards. I need to export each artboard with different formats and ppi. Is there a way I can do this quickly and efficiently without having to export each artboard individually? Thank you in advance for your time, insight, and help.

Thanks for the reply Wade.
It an unusual sitatution. I have a whole document created in illustrator. I'm handing it over to a client for them to work on in-house and they've requested an inDesign file. Ideally I'd like a way of exporting my ai file into an indd file. Haven't been able to find a way of doing this at the moment.

In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx- ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

An easy example to prove this bug of Indesing CS6: I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
and
SnapshotUtilsEx-> ExportImageToTIFF (iStream)
The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
This error does not occur with Indesign CS5, nor Indesing CC.

Can i export without double quotes in data files?

How can i export without double quotes in data files using dataexport commands in MaxL?

I don't know of any way to do any formatting in a straight export out of Essbase. BSO lets you choose between a columnar vs. free form (really Essbase) format. That lack of formatting includes removing double quotes.
If you're willing to put up with the limitations (and formatting issues) of an MDX extract to a log file, that approach does not put double quotes around member names. The same is true in Report Scripts although I have a vague recollection that you can put in double quotes if you want it -- obviously you do not.
There are limitations to the above two approaches, the biggest being that they they are not as efficient as a true MaxL export. OTOH, you may want only part of a database to get exported out in which case either approach may be more to your needs.
If in fact you do want to do a full export, there are lots of OS-level ways of removing double quotes. Here's a Windows-based approach:
Removing double quotes in a batch program in Windows 2003 - Stack Overflow
What would life be without hacks like the above? Probably not worth living.
Regards,
Cameron Lackpour

H.264 export without audio creates files that are not recognized in Quicktime or VLC

Dear all,
I need to generate h.264 files with video only. (short clips for use with a "clickable" catalog on an iPad)
Used the "H.264" category and chose a preset. Unchecked "Audio" so I only get the video exported.
The resulting .m4v file is not playable in Quicktime or VLC or MPEG streamclip.
When I leave audio enabled with the same preset, the file is fine, but as soon as I export without audio, the resulting file is unreadable.
Source material is ProRes 422HQ, audio+video, about 30-40 seconds long.
Any clues?
Carl.
Mac Pro 5,1
24GB RAM
Nvidia Quadro4000
4TB internal RAID0
OS 10.7.5
Premiere 6.0.2

Thanks Jeff, I did get that far ;-)
I'm sorry, probably my question wasn't very clear. Of course I can find some technical info about the iPad...
And of course some of the presets in Media Encoder provide basic starting points for encoding.
But... there is also the first iPad, I couldn't find the specs about it on the Apple site. On everymac.com I found:
Apple reports that the iPad supports "H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats."
So if I want to be compatible with all iPads I need to probably stay under 720p30 with [email protected] for H.264
When I look at
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC
I find (from the example values) that 1280x720@30p is quite near the maximum matrix size. So with 1024x576 I should be ok there. My bandwith of about 2Mbit is also well within range in this case. But what if I want to fill an iPod screen (1024x768) with the highest possible quality video? How do I calculate if this fits the max frame size requirements, where this is expressed in a number of luma samples and macroblocks? What is my max bandwith? The tables says that the "Max video bit rate for video coding layer (VCL) kbit/s" should be <14.000kbps. Does that directly translate to the sliders in my encoding app?
If you look in the table "AVC software implementations" (under Software encoder feature comparison) you can see that some features that are supported in MainConcept, and not supported in Qt. (8×8 vs. 4×4 transform adaptivity, Quantization scaling matrices, Separate Cb and Cr QP control, etc. What are these exactly?)
In Streamclip one can choose to have B-frames or not, in AME there is no such control. Does that mean it always encodes with B-frames? Why would one not want to have B-frames?
A lot of parameters in AME H.264 encoding seem to be set to certain fixed values that are not accessible to the user. Other programs (Sorensen, Telestream) provide the user with access to more parameters. Which parameters in AME are set to what (fixed, non-accessible) values and why?
As I said earlier, Quicktime reports different codecs for what should be the same format but from different encoders. Why? Is there a program that can analyze a H.264 stream and report about it in more detail than VLC/Quicktime?
etc. etc. etc....
If anyone could recommend an online resouce or a book to learn more about the ins and outs of H.264 encoding/decoding that would be great. I have the first edition of Charles Poynton's (brilliant!) book "Digital Video and HDTV", which does talk about MPEG-2 but not H.264. I saw that the second edition goes a bit more into detail about H.264. Does anyone have the second edition? Worth buying just for the relatively small addition about H.264?
Thanks.
Carl.

Export without Markup - JavaScript Error (ExtractTemplateXML.js)

Whenever I try the "Export without Markup" function, I get this error:
"While executing onClick in ExtractTemplateXML.htm, the following JavaScript error(s) occurred: At line 78 of file "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Configuration\Commands\ExtractTemplateXML.js": Exception thrown in native function."
How do I resolve this?

I know this post is old, but as I was having this issue lately, and managed to fix it - I thought I'd post the solution that worked for me, since I haven't seen it elsewhere.
In short:
Make sure there are no .zip files in the site you are exporting. I noticed my error was showing up right around when the export hit the folder where I had a .zip file.
Go through and delete all of the /_notes/ garbage folders that DW puts in your source site.
After I did both of these things, my export worked fine.

EXPort (without Mat view logs)

Hi
Oracle10g, Win2003
Is there a way to take EXPort without "materialized view logs", as these logs cause error in IMPort and some time even terminate IMPort.
It will be equally well for me if i got a way to completely exclude "materialized view & materialized view logs" from EXPort.
Some one please guide me the way to exclude them from IMP or EXP?
Wishes

Additionally when ever I IMPort a user some objects appear in non-compiled state, I compile them with my client tool, but I have to drop and recreate materialized view every time.
Can come one have an improved way to get IMPort with materialized view?
Wisehs

Export without synonym ....

Hi, how can i do for made a export without synonym because i need to exporta tables fromuser= x to user=y and give some errors....thanks

i have oracle 9i version 9.2 and i did the export:
exp system/manager file=userx.dmp grants=n compress=y owner=userx
and el imoport:
imp system/manager file=userx.dmp fromuser=userx touser=usery ignore=y
give me this error:
Connected to: Personal Oracle9i Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing CXP's objects into I4B
. . importing table "COMPROMISOS"
IMP-00058: ORACLE error 980 encountered
ORA-00980: synonym translation is no longer valid
IMP-00017: following statement failed with ORACLE error 980:
"CREATE UNIQUE INDEX "PK_COMPROMISOS" ON "COMPROMISOS" ("COD_CIA" , "COD_TIP"
"OCOMP" , "PERIODO" , "CORRELATIVO" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 ST"
"ORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "INFOSWEB" LO"
"GGING"
IMP-00003: ORACLE error 980 encountered
ORA-00980: synonym translation is no longer valid
IMP-00017: following statement failed with ORACLE error 20000:
"BEGIN DBMS_STATS.SET_INDEX_STATS(NULL,'"PK_COMPROMISOS"',NULL,NULL,NULL,33"
"02,15,3302,1,1,1407,1,0); END;"
IMP-00003: ORACLE error 20000 encountered
ORA-20000: Unable to set values for index PK_COMPROMISOS: does not exist or insufficient privileges
ORA-06512: at "SYS.DBMS_STATS", line 3613
ORA-06512: at "SYS.DBMS_STATS", line 3718
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20000:
"BEGIN DBMS_STATS.SET_TABLE_STATS(NULL,'"COMPROMISOS"',NULL,NULL,NULL,3302,"
"79,160,2); END;"

Export without Markup - How ?

I can't figure out how to export without markup. I did it
before but now can't
What I want to do is export all the site pages and
images/scripts/etc without markup
I'm using DW 8
Would someone mind explaining this to a total dummie
Many thanks :-)

> I think I just want to strip out DW markup, leave the
html and code stuff
>
> I know it will disconnect the uploaded pages from the
template but I'll make
> the 'upload' dir contents kind of like a third leg of
the editing. There will
> be LOCAL, REMOTE, and UPLOAD
Refer to my first reply-
Dw menu-->Modify-->Templates-->Export without
markup.
export to a NEW folder, not within this site.
Then go to menu->Site-->Manage Sites.
Make a new site definition (or duplicate the present one)
Define this new site's Local Site Folder to where you
exported the files.
You now have two sites- One for editing, with the template
markup intact.
One for uploading with the template markup stripped.
Note- the template markup is a handful of html comments.
There isn't any
real advantage to stripping it out.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Export without Title Role

What I am wanting to do is export without Text a clean Timeline. What would be the suggested route to take? Have tried turning of the Title Role and Exporting and found the text is still there. Why? Suggestions Please or even better Answers.
P.S. Please Apple, Batch Export, Soon.

what do you mean by "role."
Look at the names of the title "clips." If they're all the same, simply do a find for the name in the sequence with find all. They will all be selected and hit control-b to disable them all.
When I finish a project, I find it useful to clean up the timeline and move all titles to a higher video track(s) so it's easy to turn this track's visibility off.

Export without crop

What I would like is an 'export without crop' option. I crop the pictures I export for my clients. But for my own use in inDesign I want them full frame. I was discussing this with some of my collegues and they would love this feature as well, they said....

function(){return A.apply(null,[this].concat($A(arguments)))}
hsbn wrote:
You can create virtual copy before doing the crop. That what I've done all the time.
Exactly, and this is how to do it after the crop to clean up your history of cropping:
Select the thumbs you have cropped and also want an uncropped version and add to a collection if they are in multiple folders
Select all the thumbs in the collection
Press ctr or cmd and ' (apostrophy) or from the menu: Photo > Make virtual copy
Press R to crop and Reset in the crop panel.
Assign a keyword or label to separate the cropped and uncropped versions if required
You will now have two versions of each photo, cropped and uncropped.
Rory

Lightroom exporting without LR adjustments

I've been happily exporting my LR images, and they have always included what ever adjustments I had made in LR - crop, color, etc. Last week I needed a different cropping of an image. I made a virtual copy, then cropped, selected, and exported only to find that the exported image was the original show, without any cropping or any other adjustments.
I needed the image quickly, so I just opened PS and edited manually, then saved for web.
Today I added some images to LR, edited them, and exported. All the images were original, unedited versions. I've checked the export dialogs, and do not see any options to export without edits (as there is in the "Edit in" dialog).
This lack pretty much cripples LR for me, as far as using it for any serious work. Anyone have this experience? Or more importantly, a fix?

I've been having a similar problem recently in Lightroom. At first I thought it was because I shot an event with fill-flash in daylight and I thought my white balance was messed up because of cross contamination of light. But, since that shoot 2 weeks ago EVERY other shoot (around 1,000 images) have been giving me very weird white balance problems. Essentially, my images seem "greyish" so, I boost temp and tint, I boost vibrance, I try all sorts of tweaking until the image looks passable, but not nearly my typical color and saturation look and feel. The processed images in Lightroom still seem a bit under saturated and just "not right." BUT, when I export them... they're OVER saturated - kinda like the numbers in Lightroom tell me the image should look. So, it seems that the display in Develop mode is under saturated and "off." But, I have no idea how to correctly compensate. I feel like I have some hidden setting set incorrectly - Any thoughts? Ideas greatly appreciated. If a screen grab would help I'll try that.
I'm in Lightroom 2.5 and Camera Raw 5.5
I'm on a PowerPC Mac running OS X 10.4.11
Jay
Message was edited by: jjlevan - I came back to post a screen grab from Lightroom and the JPG which looks like the Lightroom settings you see with the tint and vibrance boosted. But the Lightroom image looks UNDER saturated or almost normal.

Exporting without red cross... Please help...

How to export without the red cross line? I am trying to export to AVI but whenever I exported, it will be red line in between the movie. I am a newbie to AE.
Thanks in advance...

Thanks... It worked!!! I bought the plug in and entered during installation. But have to activate it later... Now already activated...

Export without artboard

Similar Messages

Maybe you are looking for