Exportation PSD sous illustrator

Bonsoir,
J'ai un souci lors de l'exportation d'un fichier illustrator vers un fichier photoshop. J'aimerais pouvoir retrouver dans photoshop TOUS les calques créés sous Illustrator. Pour mon premier fichier : nickel, ça fonctionne parfaitement. Ensuite, je réitère l'opération avec un autre fichier illustrator mais quand j'ouvre mon fichier exporté en PSD sur photoshop, les calques ont été aplatis. Pourtant, j'ai bien coché l'option "Ecrire les calques". Voilà voilà, je ne comprends pas pourquoi tout d'un coup ça ne fonctionne plus alors qu'hier, avec mon précédent fichier, tout allait comme sur des roulettes.
Je précise que si je reprends mon premier fichier et que je l'exporte de nouveau, ça fonctionne parfaitement. Par contre, si sur ce même fichier je crée plusieurs nouveaux sous-calques, ils seront aplatis lors de l'exportation alors que le reste des calques sera conservé.
Merci de votre attention et merci à ceux qui prendront la peine de m'aider, bonne soirée.
PS : Je suis sous Photoshop CS6 et Illustrator CC.

Any layer with transparency involved and all lower layers will be flattened in the conversion to a PSD file. The PSD file is a raster and needs to show what it sees.

Similar Messages

  • Export cliping mask as PSD from Illustrator

    Hello, i'm trying to export Illustrator cliping mask as PSD file, but when i import file into Photoshop i my cliping mask is not cropped, so it imports the borders of the rest of illustration artwork. I tryied to expand the cliping mask, getting same result. So need help how to prepare cliping mask in Illustrator to export for Photoshop with same borders as mask have? Thank you everyone.

    I have a lot shapes like donut or "O" when i release mask i loosing the shape, and becose i working on map i have hudge number of shapes like this one it will take too long time spend to release all mask and prepare them with shape builder or patfinder each one. Is there any easyer way to export clipping mask to PSD from Illustrator with etitable separate layers? All i get is an image without cropped egdes when i export. I tryed diferend color mode and lots of stuff but somewhere i missing something...

  • Cannot export path to illustrator

    I am using CS3 and am trying to export a path to an illustrator file.  I started with an 8bit black and white image and made a path from a selection. When I go to File > Export the export option is greyed out and not selectable.  Any ideas on how I can open this option?  I have tried to use Save as to save the file as a .psd prior to export but the only options it gives me is a .tiff and a .raw.

    At least for me in cs3, the export menu or the export paths to illustrator option
    is never greyed out (when an image is open), even when there aren't any paths in the image.
    So your problem is probably something else. Did you try resetting the photoshop
    cs3 preferences?
    This is what i get when using export paths to illustrator on an image that doesn't have any paths.
    MTSTUNER

  • How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

    Hi
    Can anyone help?
    How can I export an Adobe illustrator CC .AI file to a DWG or DXF file,  without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
    I have made sure the file is ungrouped or has any compound paths or colours.
    Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
    The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
    Formats they can handle are:
    DWG, DXF, IGES, IGA
    There must be a way to export it without re-drawing the whole design in Soildworks again!!??
    Can anyone help?
    INCA

    Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
    Mylenium

  • I want to write a plugin for import/export in adobe illustrator cs6 my document is web type(profile)

    hi ,
    I want to write a plugin for import/export in adobe illustrator cs6 my document is web type(profile).
    so please suggest to me in which language i need to write this(c#/c++/VC++).
    or if u have any suitable example /link share with me

    http://forums.adobe.com/community/illustrator/illustrator_sdk?view=discussions
    And provide more details. Nobody can even begin to advise based on such vague info.
    Mylenium

  • Adobe Illustrator Draw will not export to desktop Illustrator with the photo layer turned on.

    Adobe Illustrator Draw will not export to desktop Illustrator with the photo layer turned on. This severely strains my workflow and makes it incredibly hard to add the image after it is exported to the desktop Illustrator. Is this being fixed??

    This is a new bug in our latest release, and we apologize for not catching it before it went out. We are putting together a patch to address the issue. The only workaround at this point is to delete the photo and then send to Illustrator again.
    Thank you,
    Frank
    Draw Engineering

  • Getting darkened/ washed out colors when exporting png from illustrator

    Hey everyone I'm trying to figure out a remedy for this, I am getting darkened less saturated colors when exporting a logo png from illustrator, jpeg's looke fine, even when copying this logo into indesign and exporting the colors look fine there as well. I think it has something to do with the icc profile being embeded in jpegs but not pngs, but I'm not sure. My illustrator document is set to display blacks accurately, document color mode is set to RGB, assign profile is set to working RGB: sRGB, and under color settings working space is sRGB and cymk is U.S. Web Coated SWOP v2, color management policys off for RGB and conversion options Adobe ACE (all under the color settings options). I've also tried to create a new file for web and copy and pasted my logo and tried to export that way and it didn't do anything. Any jpeg will look fine, the png even in save for web will look fine until I export or preview. My only current remedy for png at this point is to export it as is, then open it in Mac's Preview and turn up the saturation. Any help would be appreciated, I'm also using Illustrator CC and am on mac 10.7.5, thanks.

    Any other solutions? I notice if I open the AI file in photoshop and export the png from there with "embed icc profile" checked then I get the same colors that I see while in illustrator, and when I export jpegs from illustrator, but exporting pngs from illustrator always changes the color/ makes the colors look duller.

  • Why can't I get the advanced selection available in EPUB export options in illustrator CC?  It's just not there.... Neither is the image selection available.  Only Epub reflowable and fixed layout, but not EPUB...

    Why can't I get the advanced selection available in epub export options in illustrator cc? It's not there and neither is image selection.  only epub reflowable and fixed layout but not just epub.. I don't know where it is to do some book exercises for my studies.  Very frustrating.

    This is the EPUB forum: InDesign EPUB

  • Mémoire insuffisante pour enregistrer le fichier. lors de l'exportation d'un fichier .psd sur illustrator cs4

    Bonjour,
    J'ai le pack Adobe CS4, lorsque je fais une exportation dans illustrator en .psd résolution 150 ppp.
    Message d'erreur: Mémoire insuffisante pour enregistrer le fichier.
    Config PC:
    - Windows 7 64 Bits
    - Processeur: Intel core 2 Duo 3.16Ghz
    - Ram: 8Go
    - Espace Disque : 200 Go
    Avez-vous une solution ?

    Il faudrait que l'on puisse voir une capture d'écran du fichier InDesign, en affichage normal (contours des blocs visibles). Il n'y aurait pas un calque masqué dans le fichier InDesign ?
    À part ça, on ne met pas de capitales aux noms de mois… Et la marque de casques, c'est Sennheiser, pas Seinnheiser.

  • Is export path to illustrator the only way to get a psd w/ clipping path to show up in Illustrator?

    I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.

    If you relink your embedded image again, so that the image inside your illustrator layout will reflect changes of the source image, the clipping path remains. A very nasty bug of Illustrator, upon a colleague of mine stumbled upon during an Illustrator Training he held.

  • Logo created in cs6 and I need to either clone it or export it to illustrator...

    So I have created a logo in CS6...
    I would like to use the logo on a letterhead but when the letter is saved as a pdf the letterhead is pixelated. The logo is text only with effects on the lettering.
    I need be able to either export the logo into illustrator and convert it to a vector image or recreate it.
    My issue #1
    I would prefer to export the .psd file to illustrator but when I do it is very pixelated...
    My issue #2
    I am not very familiar with illustrator and I cant seem to recreate the file...
    Does anyone have any ideas?

    John Mensinger wrote:
    My issue #1
    I would prefer to export the .psd file to illustrator but when I do it is very pixelated...
    That indicates the size and resolution of the original are inadequate. Besides, just putting a raster image in Illustrator doesn't make it vector art, so even if it was of adequate size and resolution, you'd still have an obstacle to overcome.
    I am not very familiar with illustrator and I cant seem to recreate the file...
    The bevel/emboss effect you applied to the X isn't (effectively) available in the vector realm, and, the drop shadow on the rest would be a raster effect, even if the text was vector.
    I would have to assume you are pursuing a vector conversion because you've been advised that one or another output method requires vector artwork. So consider that the process which demands vector art is incompatible with raster effects too, (not just full raster images), so you may have to give them up for this particular application.
    So there's no way to actually get that bevel/emboss effect as a vector?

  • Placed images in exported PSDs are pixelated

    I'm making large prints (40x60) from Illustrator files, and the print plugin requires Photoshop. I am converting the AI file's Document Color Mode to RGB, then exporting to PSD as high-resolution 300ppi, using artboards.
    When I export the AI files to PSD and view them in PS, the photographic elements appear pixelated at 100% whereas the text & graphics are smooth and high-res. I've checked the linked photographic files, and they are not pixelated. So what I've had to do is export editable PSDs from AI using the "Write Layers" option, open the files in PS, and then re-place the photographic elements so that they are no longer pixelated.
    FYI, Anti-Aliasing is set to Art Optimized (Supersampling). The AI and PS files are both sized to 40x60, and the PSD is opening as 300ppi.
    Any idea why this is happening?

    If you are linked to the exact same photographic elements that you are replacing manually,  then this should not be happening. Check your links palette that you do not have any embed icons such as the top link (looks like an old MacPaint icon).
    If you just want flattened images, try saving your .ai files as .eps, then opening them in Photoshop and saving as .psd.
    There is a pixel limit when exporting .ai files to .psd, and with 40" x 60" @ 300 dpi that you should have gotten an error on, though they may have increased that limit in CS6.

  • [CS5][Save for Web][Anti-aliasing] Fine lines in exported PSD with adjustment layers

    Hello,
    You can reproduce the bug this way:
    - link a PSD with a adjustment (Levels, Brightness/Contrast) layer in your AI file
    - Save for Web, with AA for Art (not text) selected
    In the exported image there will be artefacts, white lines usually.
    Flattening the PSD or deleting the adjustment layers will solve the problem and anti-aliasing will be applied correctly.
    I used CMYK/RGB settings, FOGRA39/Adobe RGB 1998 for all the files involved.

    Hi,
    I am experiencing this same problem of pixelated gifs when I use the "save for web" dialog from Illustrator, but this solution has not worked for me. I have tried the trick of using type-optimized anti-aliasing, but it doesn't change the output at all. I've done this from within the "Image size" tab as well as through Effect>Rasterize>Options)Anti-aliasing: Type Optimized. My image is a logo made entirely from text, although for some of it I used "outline path", so I'm not sure if it still qualifies as text...I'm a newbie at this stuff, so the technical details are still quite opaque to me.
    Does anyone know of a solution to this that does not require me to add Photoshop to my workflow?
    I'm using Illustrator in CS5, version 15.0.2.
    Thanks in advance
    Jonathan

  • How can I place a transparent psd into Illustrator CS4 without effecting my spot colors?

    So, I'm very naive about printing processes and am working with an online book building company. I've asked them how I need to fix this, but don't expect great advice from their design team.
    When saving in Illustrator, I've been receiving the error:
    "When spot colors are used with transparency, changing them to process colors outside of illustrator can generate unexpected results."
    This effected the printing because it left a halo in the shape of the placed transparent .psd. So I need to know how to flatten the transparent psd or something in order to not have it effect the colors below it.
    Thanks!

    Thanks Monika and John. I've been working in Spot colors simply because my client has limited my palette for the screen printing we've been doing on ceramics in the past. Now we want this book to match the colors on the ceramics. But if Pantone bridge back to CMYK would work, I'll do it. I have been saving to PDF by making a combined pdf directly from the .ai folder. My links are all embedded.
    Is there a way to convert all the colors in the document to CMYK at once? Otherwise I'm looking at a very long week.

  • Is there a way to change the default export filetype in Illustrator CS4 for Mac OSx

    Hi,
    I do a significant amount of exporting from Illustrator and always need my images exported as JPG. The default filetype for exporting in CS4 (for mac) is PNG, and I can't find a way to change this. Since I always want to export as JPG, I feel like I should be able to set that as a default.
    Am I missing something? How can I change this default?
    Thanks,
    Chris

    You can create an action.
    Record the action then go to file export select jpeg and then the quality etc and then exort and stop recording the action give it a keyboard shortcut.

Maybe you are looking for

  • Not able to create new item

    Hi , I am trying to create a new item at the master level and getting the following message : You are only authorized to access company 'ABC1000' . Value secured: You Are Only Authorised To Access Company 'ABC1000' . I am not able to change the accou

  • People contacting me not in my contacts

    Recently in the last couple months I have had random people send me messages to become a contact. I do not know these people so I block them. My privacy settings are set to contacts only so how can I stop this?

  • ACR in Elements 9.0

    All, I have been using ACR in Elements 9 since purchasing a D90 DSLR this winter.  I recently noticed that in other ACR examples there are more than 3 tabs.  After reading the FAQ it said that means I am actually using the Nikon plug-in, not Adobe's.

  • RAR upload actions

    Hello Experts When uploading the rules data based on the templates in the configueration guide we wanted to make sure that in order to upload the full transaction list via the "system_action_function" file it will best to retrieve the transaction lis

  • Why won't my back up I-Tunes CD's play on my Bose Wave Radio/CD ?

    I am backing up my I-Tune's library on a stack of Maxwell CD-RW's but find that they won't play on my Bose Wave Radio/CD or the Sony entertainment center CD player. Am I using the wrong medium or the wrong format?