Exported a 3 minute video from iMovie to Quicktime, saved on my desktop. It started saving as INDIVIDUAL files, as in about 5400! Entire system froze, completely unresponsive. Powered off 3 times now, it comes on and displays my screen saver but nothing

Exported a 3 minute video from iMovie into Quicktime, saved to desktop. System started saving INDIVIDUAL frames instead and entire system froze. Powered off and on twice - screensaver appears, but that's it - nothing else is accessible

Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
You may now be able to log in and move the files off the Desktop. Then reboot as usual.

Similar Messages

HT4997 I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

MPEG4 video from imovie is sluggish and audio out of sync

Hi y'all,
I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
The Camera I used is a Sony FX7 HD camera with SD tape.
So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
However, here are the challenges I am having:
1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
The video is choppy as well.
Details: source video is 720x480 and trying to export to 320x240
My project details are:
DV-NTSC standard 48khz
Video is 10 min long

OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
Next, you can Render your Timeline, to get things as smooth as possible.
Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
Good luck,
Hunt

Imported video from imovie, when i try to play only have audio, screen is red and flickering

imported video from imovie, when i try to play only have audio, screen is red and flickering. new mac pro.

steved
Thanks for the reply with additional details.
In order to help you with the Elements Organizer 13 and Premiere Elements 13 issues, we need details of that video from iMovie.
You should be able to get the important details of the iMovie video by telling us the export settings that you used for the iMovie export.
Minimum information..
Video Compression
Audio Compression
File Extension
Frame Size
First, update Premiere Elements 13 and Elements Organizer 13 each to the 13.1 Update (See Help Menu/Update in an opened
Premiere Elements 13 project.)
We will be watching for further details in order to plan and carry out troubleshooting strategy.
Thank you.
ATR.

Why does my exported video from iMovie on iOS is letter boxed on all four sides?

The original video viewed in the cameras roll fills up the whole screen, but after exporting the edited video from iMovie, it has letter boxing on all four sides.

You would get better results if you convert the MP4 ciips into Apple Intermediate Codec before editing. After editing you can render them back into MP4 if you want.
MPEG Streamclip (free) will do this conversion. Or get iMovie 09 and it will do it.

When i export a video from iMovie the sound goes distorted?

When i export a video from iMovie to my camera roll or to youtube the music i've added sounds distorted. When i watch it in iMovie it sounds fine. Any idea how i can solve this problem.
Many thanks

Yes, I experience this same problem. The grey doesn't show up until after it is uploaded to Youtube...

Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

First: How are you exporting? Are you using the Share feature or Send to Compressor?
Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
Russ

Exporting from imovie to quicktime movie

I have a 1080i HD movie in imovie I want to export to a quicktime file. In imovie the file is 50 gigabites. When I export at full quality it turns it from 16:9 to 4:3. When I go to expert settings and render it to a quicktime movie only the sound comes through...no video. This only happens with this particular movie. Other short movies I have are compressed to quicktime in HD just fine. I need suggestions how to render this from imovie to quicktime so I can keep the video in HD.

I tried that and it makes a file without
video...sound only.
Itsounds like you didn't have the Sound box checked.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

D-Link iPhoto '11 videos from iMovie '11 - SLOW SLOW SLOW

Hi there,
I have a slow workflow in iMovie at the moment. I have only 1 project (having cleaned out to isolate the issue). But many videos in iPhoto. That are not needed for iMovie. They're just clips from my phone. Is there a way that I can permanently d-link iPhoto videos from iMovies event library? Without moving the iPhoto library or iMovie projects and Events to another location? I want to use iPhoto in just the same way as I am, and iMovie too, but without the 2 slowing each other down!
I have rejected all of the clips. This has not worked. Moving rejected to trash doesn't seem to work either. Either does nothing or crashes.
This link discusses the issue in earlier versions. Have we a solution yet?
http://forums.macrumors.com/showthread.php?t=477746
If i absolutely need iMovie to run 'like a pro app', can I just temporarily rename the iPhoto library, and then run iMovie. Then revert when I have finished. Will this cause further problems?
I have trashed preferences and caches.
Thanks in advance.
Ben

I dont have an answer, but at least your not alone. I am having what sounds like the same exact problem. I have tried shifting more memory ect w/o success.
Please include me on any solutions.
Eric Cox
[email protected]
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 2 GB
Bus Speed: 1.6 GHz

Final Cut Pro takes time to share/export a 40 minute video

I bought a brand new new Macbook Pro (4 GB RAM, i5, HD 500 GB (300 GB available) Mid 2012 model and it takes 3-4 hours to share/export a 40 minute video without any effects applied on the clips. I have another Macbook Pro, same model and same specs and it just takes an hour to render the same video/project which I think is reasonable time.
Video files are from my Canon 60d camera which are .mov files. I usually export my projects to H.264 Video and AAC. (Share>Master File)
I don't have any problem exporting/sharing a 3 minute video with effects applied on the clips on my macbook Pro where I'm having a problem with because it has the same export/share time with my other MBP. It takes 5 minutes to share/export a 3 minute video which I think is reasonable. The problem is why my new Macbook Pro takes time to share/export a project with a video duration of 30-40 minutes compared to my other Macbook Pro.
Thank you for your help!
Final Cut Pro version: 10.0.8
Macbook: OS X 10.9.2

If you have two MBPs with exactly the same specs (including GPU) – and you have comparable free space on both system drives –and comparable free space on any media drives – then verify that your perceptions of their exporting times are different by doing a test with identical projects media and export settings – and ith no other apps running. If you confirm that one is much faster than the other, I'd suspect the GPU. Also open Activity Monitor to see what's being reported – particularly to see whether there are differences in the way memory is being used.
Russ

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Poor video from iMovie 11 imported from supported Sony HD camcorder

Poor video from iMovie 11 imported from supported Sony HD camcorder
Latest model New iMac 27 " screen 3.4 ghz intel core I7, 12 GB of memory running Mac OS X version 10.7.4
Imovie 11 version 9.0.7
New Sony hd camcorder model HDR560V, 64 gigs of internal flash memory, recording at highest quality hd settings.
Transfer is via USB.
Video in camcorder screen is perfect, same video connected directly from camera to a monitor is perfect. Also seems to be ok when importing into a Mac Book pro.
Import into the iMac using iMovie 11and played back full screen on the iMac has the look of soft VHS tape, not tack sharp and pronounced video lag when panning or when a subject moves across the screen. Has anyone else resolved a similar issue? Any suggestions would be appreciated. I paid for 3 years of Apple protection care but Genius bar experts at local Apple store are stumped.
thanks
tvideo

I'm sorry, I didn't know Imovie has it's own Forum- it's not listed here. Looks like I need an adapter for memory card, because I have an older Mac which doesn't have a slot for the card.

My wirelessinternet speed seems to be fine, however, trying to play a 1 minute video from my iphone to apple tv via airplay is so slow. Any fixes?

My wirelessinternet speed seems to be fine, however, trying to play a 1 minute video from my iphone to apple tv via airplay is so slow. Any fixes?

>Any fixes?
Don't use WiFi for streaming video. It is even worse for AirPlay since you are using bandwidth twice as it sends data from the iOS device to the router and then from the router to ATV. Use an wired connection to go to ATV. Even the high end consumer grade WiFi equitment is not great at doing streaming video.

Exported a 3 minute video from iMovie to Quicktime, saved on my desktop. It started saving as INDIVIDUAL files, as in about 5400! Entire system froze, completely unresponsive. Powered off 3 times now, it comes on and displays my screen saver but nothing

Similar Messages

Maybe you are looking for