Exported AVI from FLA deosn't work

I exported my project from FLA into AVI format for powerpoint
presintation, but when i try open my AVI file in any video players
(windows media player, real player, dvx..etc) it doesn't wanna work
!!! Player shows that this files needs a codec or it was currapted.
I tryed to export it in different ways and still the same results.
And its sucks, because powerpoint can't play .MOV files, because i
dont have any problems to export it into quicktime move. What can i
do or what kind of codec do i need?

Found the problem.
The lower-third has a lens flare feature. This lens flare has a black background that, for some reason, doesn't become transparent when you bring it in to FCP. (If you place an element behind it in Motion, it's fine.)
Kind of ***** because that was the main reason I like that particular template.

Similar Messages

Export AVI from Adobe Media Encoder Mac

I would like to export AVI files from Adobe Media Encoder (CS5 or later) on a Mac running 10.6.8 or later. Am I able to buy the codecs for Mac to do so?

[email protected]
VLC player does get the job done, but I have found it to be glitchy in the past.
I would recommend MPEG Streamclip much more strongly.
I trust it much more.
And free download, for Mac or PC. Just google it. (Though I have only ever used the Mac versions.)
Though, I don't understand what you mean by saying that the .avi extention seem contrary to what was said above.
Whatever "container" you use for your video file is what the extension will be. i.e. "video_file.avi"
Within that container, there will be a compression codec (of which there are numerous options) that the container used to compress the video.
That codec will not be displayed in the extension.
MknzBrkr
I know you posted over a month ago...but maybe it will still be helpful!
I do not remember the video codecs available within VLC player. Sorry.
But if you decide to follow my advice to Timoyer and use MPEG Streamclip (which I highly recommend that you do!)...
Then you can use File > Export to AVI... > and then select "Apple Component Video - YUV422".
That is an uncompressed format.
While it will be quite large, hopefully that will be what your client is looking for.
Good luck to you all!
And have a great week!

Exporting .avi from FCP 3 / Opening FCP3 project in FCP 4

Hello,
I am currently working on a project in FCP 3. I need to export an .avi-file for use in Adobe Encore on a pc. I have done this before and used the DVpal codec which worked ok, but with this project the image quality is not ok, mostly there seem to be small jumps in a sequence (is on the verge of not running smoothly.. sorry, hard to describe).
I tried all the other codecs I have (BMP, Cinepak, DVCPRO-PAL, DVCPRO50 and no compressor) and all either gave inacceptable image quality or the film does not run smoothly, or took several hours for rendering a 3 minute film.
Can anyone recommend a codec that gives decent image quality and does not take hours for rendering (I am working on a G3 900Mhz ibook). Is there maybe an mpeg2 codec I could use so that I could avoid recompressing in Encore?
I also tried importing the project into FCP 4 on a G4 1.5 Ghz Powerbook but cannot open the file. Is there any way to convert the project to FCP 4? I read about using the XML export for transferring from FCP 4 to 5 or vice versa, but FCP 3 does not have the XML option.
Any ideas would be greatly appreciated.
Natalie
ibook G3, 900 Mhz, 640mb ram Mac OS X (10.3.9)

I don't know better than you, Randy, but I do have strong opinions.
OS X does tend to avoid file fragmentation, but that can only do so much, depending on how full the volume is and how much file deletion has taken place.
If the volume is very full, and you can't delete enough data to trim it down, the best thing to do is move/copy all the data to another volume, wipe the 1st volume, then move/copy all the data back. This is usually faster than using a defrag utility.
For best performance, keep your volumes less than 60% full. But I know guys who regularly run at 90 and 95% full without issue. So, go figure. And I know that conventional wisdom says to try to keep volumes less than 80% full. The thing is, when you benchmark a volume with a utility that measures throughput on the outer, inner, and middle tracks separately, you find that most hard drives will slow down when more than 60% full. NOTE: Not slow down terminally, but slow down by 10 to 20 percent or so.*
But the real answer to the defrag question is, don't worry about it . . . as Randy said.
* If you do the math, you'll find that the read/write heads are exposed to about 1/2 of the surface area on the inner tracks as on the outer tracks in a given amount of time. FWIW.

Export .avi from Mac Premiere CS4

I need to export or somehow achieve an end product of an .avi file from my Mac Premiere CS4. Can anyone help?

Either get a PC for that job or export as MOV and convert to an AVI wrapper.

Why exporting eps from InDesign isn't working?

I'm trying to export a brochure cover from InDesign as an eps to open in PhotoShop (to create web image). The eps won't open in PhotoShop. I've also tried exporting the cover page as a jpeg. This will not open in PhotoShop either. The message says it's not the right kind of document. My InDesign updates are current and I've rebooted to see if that would help. Any ideas?

I believe I have the problem solved (thanks to forums!). I had a couple of
images that needed to be relinked within the brochure. Once that was done,
the brochure cover exported just fine. In PhotoShop I just clicked open >
.eps file and it did it's thing.
THANKS SO MUCH for trying to help me out!
Robin Maxon
Maxon Graphics
982-4050

Export .avi from AE on Mac

IS there a codec available for macs, particularly the MacBook Pro, that will allow export as a .avi file in After Effects?
Thanks,
Shelley

Either get a PC for that job or export as MOV and convert to an AVI wrapper.

Web export settings from FCXpress? What works best?

Hey there all who are willing to help!
I am making a video blog for my family through the holidays and am shooting the videos with iMovie '06's iSight video capture. Doing this, I have found, saves the video as .mov files which I then import into FCXpress and begin editing. I am only limiting the videos to a 4 min limit but they tend to come out either too big a file size (I'm shooting for 13MB tops) or too choppy for my satisfaction no matter what setting I use. I have settled for the preset Broadband- Medium but have been unhappy with the 320x240 resolution. I prefer a bigger res but every time I adjust it the file size, of course, hops up numerically too.
I understand iSight's .mov files are only containers for the actual codec: Apple Photo - JPEG, in a 640x480 res.
What have you used? What works best?
-How do movie companies make 2-minute trailers in AMAZING quality? H.264? What else?

One reason professional companies produce high quality video is because they don't shoot it with an iSight camera.
Another is that they don't limit the size to 320x240.
Broadband High is the minimum quality you should be using, and if you want reasonable results you will have to accept larger file sizes.

Excel Export from Discoverer doesn't work

Hello ,
my customer has problems with exporting excel from discoverer.
It works until it says 'open excel', then she gets a white screen and nothing happens anymore, after that, she has to shut down the computer, because nothing works anymore.
And it only happens with a certain discoverer-user.
Another customer has the same problem with the same discoverer-user.
I don't have this problem with the same discoverer-user, everything works fine on my computer.
I don't know what problem this could be, and I don't know, where I must start searching ???
Can anybody help?
Thanks Uta

Hi Uta
It sounds like you might be Windows XP with Service Pack 2 installed. Microsoft, as always, does not quite tell you everything that they have changed. The big one this time is that Service Pack 2 sets a registry switch that by default prevents Internet Explorer from transferring applications between zones. To Microsoft, running something from a web server (Discoverer) and then running something on your PC (Excel) means running applications in two different zones. With that switch set, your PC cannot switch zones when running Internet Explorer and so cannot open Excel from within Discoverer Plus or Viewer.
To allow Discoverer Plus to call a local copy of Excel you need to reset the switch so that it one again allows zone switching, like the old XP. The switch should be set to 0.
Follow this workflow:
1. Open your registry and look for this setting:
[HKEY_LOCAL_MACHINE]/Software/Microsoft/Internet Explorer/Main/FeatureControl/FEATURE_ZONE_ELEVATION/iexplore
It is probably set to 1 and it should be set to 0
In the Windows environment:
1. Start | Run | Regedit (to open the registry)
2. Locate the following key path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION\iexplore.exe
3. Change the value of this setting from 1 to 0 and close the registry editor
4. Ensure that the following settings for the .xls & .xlsx file types are unchecked:
a) Open Windows Explorer
b) Goto Tools | Folder Options | File Types tab
c) Select the Extension XLS for Excel 2003 (or XLSX for Excel 2007) then click on the Advanced button
d) At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
'Confirm Open after Download' and 'Browse in same window'
5. Click the OK button
6. Click the Apply button and close Explorer
7. Re-boot the PC
Let me know if this helps
Best wishes
Michael

Suddenly Media Encoder won't export to .avi from a Premiere Pro sequence

Came back to work today and out of the blue Media Encoder just won't export to .avi from a Premiere Pro sequence. Working with CS5 on Windows 7. That was the last thing I did yesterday before leaving work and it worked just fine, and it has always worked without any problems ever since I upgraded from CS4.
Here are the steps I always take: go to Export-->Media from the Premiere Pro sequence and the settings open up, I select Microsoft AVI - PAL DV, click the queue button, AME opens up but nothing loads, the queue remains empty and nothing happens.
I tried the same but selected MPEG-2 instead and it works that way.
I also tried opening the sequence directly from AME and it does it but it doesn't give me the option to export it to Microsoft AVI, it's just not on the list.
I deleted all preferences and old metadata options saved from all applications but that didn't help.
Didn't install any updates whatsoever that might have changed anything at all from yesterday till now.
If anyone knows what the problem might be and how to fix it, that will be truly appreciated, thanks in advance.

After a couple of hours going through the registry and every folder and file inside "Program Files--Adobe--Media Encoder CS5" and trying to find the problem, I did.
Thing is, the ExportAVI.prm plug-in file wasn't missing, it was there in the "Plug-ins--common" folder together with every other exporter and importer file, it just wasn't being loaded by AME for some reason. So i found a folder named "txt" and inside it there was a file named "AddExporterList.txt" which I opened and, as you could probably imagine from its pretty self-explanatory name, it contained a list of the exporter files that AME was supposed to load, and the AVI one wasn't on the list.
I wasn't sure wether it was best for me to edit that text file and add the AVI exporter to the list or just delete the damn thing, so i checked on an older PC with the CS4 suite installed in it and the "txt" folder didn't even exist, so I just deleted it and opened up AME again and it loaded every single exporter .prm file including the ExporterAVI.prm of course and it works just fine now, so that's a load off my shoulders, hope this might help someone else in the future.

Export from FLA or SWF into WMV

Hi,
I have a CS3 flash .fla animation and I need to convert it into WMV or MP4 to use in Camtasia Studio
Is there any way of doing that in CS3?
I tried looking for downloads on the web, so far I have found lots of software that claims to be "free" but sticks a watermark until you pay

I managed by exporting as AVI from Flash (File > Export), then importing into Camtasia
I had doubts about this as AVI often makes huge files (with some conversion tools), and/or poor quality
But Flash's AVI is OK, and I believe Camtasia reduces it as it turns it into SWF

How to export data from a spread sheet which has multiple work sheets?

How to export data from a spread sheet which has multiple work sheets to a single text file with fixed length fields?

Hello s1,
saving them as CSV will not give a fixed legth output but, as the naming says, a Character Separated Value file.
Regards
Marcus

Hi thee. As logical as I can be. I export a file back into my folder as a PSD. I then export that file to PS. Work on it, save and return it to LR. The file goes to the bottom of the folder from where I have to put it back in the original place, taki

Hi thee. As logical as I can be. I export a file back into my folder as a PSD. I then export that file to PS. Work on it, save and return it to LR. The file goes to the bottom of the folder from where I have to put it back in the original place, taking time and driving me slightly mad. Why does the file not go back to where it came from please? Thanks Tim

Umm, but this folder is an amalgam of two cameras and five cards, and I want them in capture order! Thanks for trying though Jim.
Cheers
Tim

Exporting video from one machine and then importing into another not working...

Here is my situation:
I wanted to import some videoes into iMovie on my Mac (OSX Lion) that my wife shot on her iPhone 4S (ios 5.x). I first synched her photos and video with iTunes/iPhoto on her machine (OSX Snow Leopard), then exported them from iPhoto onto a thumb drive. Then I imported them into iPhoto on my machine.
The pics are fine. But the videos are not playing. iPhoto sees they are videos, but each one is like a still: there is no duration to the video when you hit the play arrow. They also will not play by clicking on them directly in a Finder window from the thumb drive. The are showing up (for example) as IMG_0133.mov, with the proper "Quicktime movie" in the "Kind" column, but each one is 1 to 1.5 MB or less, so something is up.
Anyone know what has happened? Perhaps they don't export correctly?

Yes, I do, and I will do that when I re-do the process tonight.
Do I need to (or is it advisable) to export the .mov files separately?
I admit I was in a hurry and never having done this before, I did not look closely at the options.

Problem exporting AVI to WMV in Quicktime.

So I am putting together a powerpoint presentation for school but they have Vista computers, and my quicktime movie files and AVI files will not work because the school does not have quicktime on its computers. The only exported file through Quicktime that has worked is a WMV. However, somehow through the exportation process, the last half of the video gets cut off between being an AVI and going to a WMV.
What can I do to fix this?

Okay QuicktimeKirk. I found the problem, just not how to solve it. I looked through the guide and everything and nothing makes sense and i need these videos for a presentation tomorrow so I'm freaking out a little.
Here's the deal, I am on my vid, here are my steps:
File>Export
Next to the Export dialog box, I pick Options...
On this page, the top says Flip4Mac Export Settings - Demo Version.
So, you were right, the problem is I have the demo version. But how do I change this page to go from Flip4Mac Export Settings - Demo Version TO Flip4Mac Studio Export Settings?
I downloaded everything to my computer, entered the serial number, and installed everything.
What is the next step to fix this mess?

Uncompressed AVI from SMOKE/FLAME to Final Cut

My current problem is importing (and viewing) Uncompressed AVI from Smoke/Flame/Inferno on a Final Cut Pro system. The audio plays but the video does not. I also find that when I export an Uncompressed AVI from Final Cut through Quicktime Conversion, I am unable to view the video on my own system. What is going on here and what am I missing.
This conversion must be done on the Mac, no PC alternatives please.
Thanks in advance.

This AVI is coming from a Smoke or a Flame, as uncompressed. Basically the workflow will not allow any change in format from the Smoke / Flame, as it works with everything else in the pipeline.
Any suggestions on getting it into final cut...
I notice it plays through VLC but not through Quicktime.

Exported AVI from FLA deosn't work

Similar Messages

Maybe you are looking for