Exported file has garbage

Export is not working on my PDF file to other formats. I tried word and Excel formats.  All I am getting is diamonds in the exported file.  How do I go about fixing this problem.

If you want the output of the report in the text format you will have to change the system parameter (mode) to character and the system parameter (desformat) to dflt. U can put validation trigger at the parameter form and change the value at run time also.

Similar Messages

  • The Share Operation Export File has failed QuickTime Error -50

    Hi, i've been trying 6 times or more to export a file from FCPX. I have done this many times but now it's failing with the above error.  I have nearly 300GB of space on my drive.  Any solutions? 

    This video had something like 30 powerpoint slides (jpegs) added and this is obviously a problem because as soon as i removed them it worked fine.  Not sure what the limit is but will have to experiment. thanks for your help.

  • Reports output to file has garbage

    Using Report Builder 6.0.5 on NT, I have a
    report that prints perfectly. I'd like to
    have the same report sent to a text
    file if the user selects File as the
    Destination Type. Indeed, the file gets
    created in the specified directory, but the
    contents are gibberish. How do I send this
    report to a file?
    null

    If you want the output of the report in the text format you will have to change the system parameter (mode) to character and the system parameter (desformat) to dflt. U can put validation trigger at the parameter form and change the value at run time also.

  • After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

    after exporting to quicktime file, the file has sound but no video, what am I doing wrong?  The self contained movie box is not checked.

    Hi
    Did You go via Compressor ?
    Did You use QuickTime Conversion ?
    I don't
    I do
    • In TimeLine set In and Out-Points to the full Movie/Project
    • Select ALL - Clips and Audio
    • Go up to Sequence and down to Render Only - down to Mix Down Audio
    • then Sequense and Render Selected - Both (Video and Audio)
    • then Export and as QuickTime .mov (NOTHING ELSE)
    • I use to do - Not Self-Contained as it saves both time and space
    Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
    Good Luck - Yours Bengt W

  • My exported 2015 iMovie file has bad quality.

    Hello.
    I just got a new MacBook pro, OS X Yosemite 10.10.3.  Using iMovie 10.0.7 (the latest version to my knowledge.)
    I realize that this question has been beaten to death all over the internet, but I haven't made any headway STILL.  I just completed an edit that looks AMAZING in iMovie, and when I export it, the file is very distorted.  I'm exporting at the highest quality (1080p) and the file ends up being 8GB (8 minute movie) which I would think a big file like that would produce good quality.
    I'm stuck.  Any help would be greatly appreciated. 
    Here's the upload (notice the distortion and grainy-ness during motion, again looks AMAZING in iMovie.)
    https://www.youtube.com/watch?v=eeQ85ybI_II
    Mike

    iMovie file has bad quality.
    hmmm, really?
    I pick up a scene ...
    <click for fullsize>
    This is a 'killer' for any encoder! Those ultra-soft gradient in the sky shows no banding!
    Not to say: superb! Compare to a less encoded version:
    <click for fullsize>
    you see? THAT is bad quality! Tons of banding in the sky...
    ... post a scene, which doesn't fullfill your standards …
    btw: what camera in use? settings? a GoPro I assume, those 'cinema' settings?
    PS: you let YT play it in as 720/1080? ....

  • I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge dela

    I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge delay!!! HELP!!!!

    oh and if you use a creative cloud version of Lightroom it could also be that the logon to the cloud is messed up. Logging out and logging back in from preferences in the creative cloud app will fix that. Due to the release of Lightroom CC it appears that adobe's servers have been overwhelmed a bit And many people have strange problems that are solved by logging out and back in.

  • Export Problems: "The share operation Master File has failed"

    When I try to export anything out of fcprx whatever the setting I get this "The share operation Master File has failed- The operation could not be completed because an error occurred when creating frame 1406 (error -1)"
    I have read that it a dodgy import but I did it correct this time?
    Any Idea how I can stop this?
    Cheers

    Have tried to disable nap? http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/

  • Export file (rtf and doc) has a cut off field

    Hi,
    I am using CR10/VB6/Oracle10.2
    CrystalViewer shows the report preview fine then click the envelope icon to export file
    (rtf or doc).
    When I open the exported file (.rtf or .doc), there are some fields in the file is cut off .
    Half of line of record is cut off horizontally.
    This problem does not happen always. I don't know it depends on the record or not.
    Does anyone have a same problem?
    Thank you

    Hi Sachiko
    CR X is not tested with Oracle 10.2. This issue may occur since some of the dlls may not be supported. Hence you can try out the following:
    1. Apply the latest Service Pack and check if you get the same issue.
    2. Try using another Viewer and check if the issue still persists
    3. Try upgrading CR X to CR XI R2 since CR XI R2 is tested with Oracle 10.2
    Regards
    Purva Naik

  • I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

    I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.01 can not open Pages 5.2 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 95 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Lightroom 5 cannot export files in original Raw format (LR 5.4, Mac, OS 10.9.4).

    A client has the following problem: When trying to export files in the original Raw format (.CR2), the operation failed and a dialog informs us that "Some export operations were not performed". We can export JPEGs just fine.
    After lots of testing, this is what we discovered:  The problem does not appear to be catalog-based; we run into the same problem using a test catalog.  The export operation works fine, however, with the same test catalog and images on two other machines, and it even works fine on the same machine with a new user admin account that we created. 
    So it appears to be something associated with the user account, , or with how LR is interacting with the user account, but I cannot figure out what it might be. We can copy the Raw files when using the Finder to do so. But not via Lightroom.  Any thoughts, ideas of suggestion would be greatly appreciated!  Thanks, Sean

    As part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals.  This would test LR's read and write permissions from and to the folders being used.
    From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
    Preference and other file locations in Lightroom 5
    You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves.  Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name.

  • Hi there, i've just finish our schools year book (voluntarily) and it has 155 pages incl. front/backcover. This file has 1800 links a lot of photos and a few reports. everytime i go to save as PDF it freezers on page 66. i need the book printed in hi-res?

    hi there, i've just finish our schools year book (voluntarily) and it has 155 pages incl. front/backcover. This file has 1800 links a lot of photos and a few reports. everytime i go to save as PDF it freezers on page 66. i need the book printed in hi-res? im running out of "printing time" as we need it back to school by 10th december for 12th December distribution.
    what do i do? if i save it in low res pdf everything will be a blur...can someone please come to my rescue. i have a
    OS X version 10.8.2,
    Processor: 3.06 GHz Intel Core 13,
    Memory 4 GB 1333 MHz RAM
    Startup Disk is Moutain Lion
    my file is about 24 GB I Purchased a 32 GB USBA stik to save and send to printers.
    PDF made easy assistance please anyone out there....?

    I do not have InDesign so I can't help you there.
    Here is an article from Adobe:
    http://helpx.adobe.com/indesign/using/exporting-publishing-pdf.html
    Export an open document to PDF for printing
    Choose File > Export. 
    Specify a name and location for the file.
    For Save As Type (Windows) or Format (Mac OS), choose Adobe PDF (Print), and then click Save.
    When you select the Adobe PDF (Print) option, you cannot include interactive elements in the PDF. To export an interactive document to PDF, see Create interactive documents for PDF.
    Do one of the following:
    To use a predefined set of job options, choose a preset from the Adobe PDF Preset menu.To create a PDF/X file, either choose a PDF/X preset from the Adobe PDF Preset menu, or choose a predefined PDF/X format from the Standard menu.To customize options, select a category from the list on the left and then set the options.
    For Compatibility, choose the lowest PDF version necessary to open the files you create.
    Click Export (Windows) or Save (Mac OS).
    To reset options to the default, in the Export Adobe PDF dialog box, hold down Alt (Windows) or Option (Mac OS) and click Reset. (The Cancel button changes to Reset.)

  • Schema Import failed :IMP-00008: unrecognized statement in the export file:

    Hi ,
    I was running a database schema import from a database DMP file.
    I encountered the following error in the log file that was getting generated :
    IMP-00008: unrecognized statement in the export file:
    All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
    But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
    If reimporting the schema again the only option ?
    Thanks
    Kk

    Hello,
    In this order:
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
    Table Objects: Order of Import
    Table objects are imported as they are read from the export file. The export file contains objects in the following order:
    1. Type definitions
    2. Table definitions
    3.Table data
    4.Table indexes
    5. Integrity constraints, views, procedures, and triggers
    6. Bitmap, function-based, and domain indexes
    The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
    For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
    When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
    A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import.

  • When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

    If anyone can help me with this I would be seriously grateful.
    When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
    I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
    This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
    I've used Aperture in the past under previous versions and not had this problem.
    Any help would be great.
    Thanks.
    Bob.

    Hi Jack,
    Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
    It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
    I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
    Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
    Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

  • Error when exporting file from LR5.2 - file created

    After updating to LR5.2, I receive an error when exporting files to another disk drive.  a file is created, but a warning appears "Unable to Export:  "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute".  I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application.  I tried removing the program and reinstalling through CC, with no change in this behavior.

    The answer is in the thread:
    http://forums.adobe.com/thread/1303578?tstart=0

  • Large export file when application contains a BI Publisher report

    Anyone have an idea why an application export file grows dramatically when a BI Publisher report template is added to an application? I have an application that was 400+ KB and went to 88+ MB just by adding one report query and RTF template. This results in taking over an hour to import the application.

    Each RTF Report layout is converted to an ASCII string to allow the import routine to load the rtf as part of the application.
    If your template has any embedded graphics e.g. a logo then this SIGNIFICANTLY increases the size of the ASCII encoding of the template.
    Hope this helps.

Maybe you are looking for