Exported files cut off early

Hi
Im exporting several files from Final Cut Pro HD, in DV format 48KHz PAL (although this problem occurs on any file type I export). When the exported files are viewed in Quicktime the look and run fine. However, if I am viewing the files in any other media player, such as VLC or Windows Media Player, then the ends of the file get cut off short.
Is this a common problem, is there a solution or something I'm doing wrong?
Thanks
camokid*

Sounds like either the WAB is not set to the full Duration of the Timeline, or there has been an accidental Out Point set on the Timeline.
For the first, hit the \ (Backslash key) to zoom the Timeline to min. and then Dbl-click the little square in the middle of the WAB (Work Area Bar) to expand it to the max.
For the second, look at the Timeline ruler, near the end, and let us know if it is a different shade of gray, in that last 10 sec.
Good luck,
Hunt

Similar Messages

Embedded Sounds Cut off Early

This is a repost of a question I oriinally posted here http://stackoverflow.com/questions/11321441/embedded-sounds-cut-off-early .
I figure this is one someone who knows the compiler part of Flash intimately will need to answer (if there is a good answer--if not I probably need to file a bug report).
I have a combined Flash Builder/Flash Pro project. Because of the hassles involving in maintaining sound assets on the timeline, my sounds are all embedded into Class files, like:
[Embed (source="/mp3/Welcome_01_V.mp3", mimeType="audio/mpeg")]
private static const WELCOME_1:Class;
These files are then referenced by the base Classes for the symbols that need them, embedded for Actionscript on Frame 10 (because the second frame label is on Frame 10 to give space for you to read the first one).
What I'm finding is that a few of these Sounds don't play all the way through, but the SoundChannel dispatches the "soundComplete" event, and its final position matches the Sound's length.
All sounds are converted from wav to mp3 at 44kHz / 16 kbps using dbPowerAmp. I faked out the compiler to avoid a reference to Flex by including a dummy SoundAsset that extends Sound.
I don't know what other steps to take to debug this. Is there a way to figure out whether the problem is on the compile side or on the run side?
More things I have tried:
Looked at the Size report: The nonworking sounds were smaller in their embedded form than the source mp3
Got rid of my own BitmapAsset and let Flash link in the Flex Framework and do whatever that does (definitely worse)
Dropped the encoding from 44 kHz to 22 kHz (no improvement or worse)
Dropped the bit rate to 8kbps (the lowest dbPowerAmp, the tool I use, supports). This usually helps somewhat, but I still usually use a word or two from the end of the file
Dropped both parameters in the encoding. This helped a few that just dropping the bit rate didn't, but not all files. Plus it sounds tinny.
Note that the file size and length of the Flash file does not seem to be what causes this--I have had 50k+ files that did fine, yet had a problem with files < 20k.
Thanks!

Have you tried disabling Omnisphere, just for a test, to see if the problem is occurring with just the built-in plug-ins? Another thing to try, if you haven't already done so go ahead and display the CPU meter.. you to this in the app's Display preference pane. Then double click on the CPU side of the meter in the toolbar. This will open a CPU monitoring window... and you can instantly see how much CPU each plug-in is using... assuming it's a CPU overload that's causing it.
Not sure if this is how you are using it, but if for instance you play something with Patch A and when you switch to Patch B you're either holding sustain or you want the sound to crossover into Patch B so it tails nicely... at this point you have both Patch A and Patch B active at the same time. If both those patches have 2 Omnispheres you actually talking about 4. Maybe this isn't exactly what you're doing, but you get the idea.
Can you stand to have a slightly bugger size? Maybe try 256. Oh, and definately quit all other apps and perhaps turn off airport.

ITunes songs cut off early

Heyas;
So I have been going through my iTunes collection - backing up and getting missing artwork, etc. and I have noticed that several songs end early/get cut-off. This happened to one song a while back that was a download from the iTunes store. I figured the file somehow got corrupted so re-bought the song from the iTunes store. Now that it has happened to several songs I am suspicious that there must be another issue than one corrupt file.
The files that cut off early are AAC format. There may be some older MP3 formatted songs that are effected as well but I have not found any as of yet. The recently effected files are ones I imported from my CD collection; but as mentioned above, I have had issues with iTunes store songs as well.
I also recently deleted all the songs from my Windows 7 PC and transferred all the files from my Mac Mini (where I keep the 'master' copies), using 'home sharing'.
Thanks for taking the time to read this post
Any suggestions?
I use a Mac Mini 10.4 and a Windows 7 PC. I keep both iTunes libraries synced up.

I have the same problem. It's disappointing that there aren't more replies to this issue two years later. I just delete the song from iTunes and then delete the song file in the iTunes Library. Then I go back to the store and redownload it. It asks if you would like to "purchase" the song again. Say Yes. You can download the song for free(You won't have to pay again). Then you have to listen to that song to see if it's complete. Sometimes I have to do this several times before I finally get the full song WHY??? When there are several songs on one album that are incomplete this can be a very tedious process. I bought an album today and a few of the songs are cut off like this. So I'm off to try to get my money's worth...

Adobe 9.0 - Recognizing Paper Size - Scans cut off early B4 end of PG

Hello,
I am having a problem with Adobe standard 9.0.
We use adobe to scan various important documents.
We have several preset scanning profiles.   One is color and one is black and white, no other settings should be different.
When we scan with the B&W a 8x14 document will get cut off early, for example just after a signature. The resulting scan is neither 8x11 or 8x14 it just seems to be cut off early at a random point. We have tried reseting the preset to default without luck.
When we scan with color..... and the same document that contains no color.....   No problem.
We do not have this problem with another scan program (Kofax).
What is going on?   Updates?
Please help & Thank you for your assistance!
Tony H.

Actually, a quick test today shows neither color nor BW would scan the page to the correct size.
Please help,
Tony.

Export to text file cuts off data...

I have a report that contains fixed width formuals that are in a text box. The data is 496 char wide. It will preview fine in a small font - but when I export to a text file it re-sizes the font to courer new 10 and cuts off data after 80 char. Any ideas?

hi
as per my experience crystal has got some weird limitation in export.
AG

Illustrator file cut off?

converted a CC trial file to open in other versions of illustrator, but the file does not contain all my work/images and is instead cut off. what do i do?

what do you mean "converted" did you save down to your current version?
sounds like you didn't and what you opened was a pdf version of your work.
select all and unmask it (cmd+option+7). the cutoff work might show up. effects and maybe gradients will be expanded.
otherwise you need to get your hands on cc and make sure you downsave correctly.

Import of MXF files cuts off at 30 seconds.

I am having trouble importing MXF files, the import cuts off at 30sec. I cannot import clips that are longer than 30sec. because FCPX cuts them off after 30sec. What am I doing wrong?

What kind of MXF? What camera shot the footage?
Russ

Audio in .mp4 file cuts off

The audio in the mp4 file I am trying to use gets cut off. It plays 95% of it, but for some reason cuts the audio off towards the end. I have checked the file on both a PC and Mac and on both the audio shows fine, but when I open it on my computer (Mac) it is cut off. I have tried a clean install of AE CC 14 and that did not help.

MP4's and compressed audio may or may not play well with different machines. It's the nature of a format that is CPU intensive and decodes the file in blocks.
If you start with a frame based source that has a standard uncompressed audio track the changes of having a successful render of your mp4 is much higher, but still not 100% guaranteed.

New iTunes Store Songs Cut Off Early

I just downloaded two new songs from the Store. Each cuts off and ends with about a minute left. Having paid for both songs, I expect them to play. Is this fixable?

I have the same problem. It's disappointing that there aren't more replies to this issue two years later. I just delete the song from iTunes and then delete the song file in the iTunes Library. Then I go back to the store and redownload it. It asks if you would like to "purchase" the song again. Say Yes. You can download the song for free(You won't have to pay again). Then you have to listen to that song to see if it's complete. Sometimes I have to do this several times before I finally get the full song WHY??? When there are several songs on one album that are incomplete this can be a very tedious process. I bought an album today and a few of the songs are cut off like this. So I'm off to try to get my money's worth...

Why are some songs cut off early?

I just transferred my iTunes library from my old macbook (where it was working fine) to my new macbook pro. I notice many songs cut off before finishing, usually all the songs from a same album. I downloaded my past purchases from icloud and still happens. My ipod, which I now synced with my new macbook is (obviously) doing the same. Anyone have any bright ideas to resolve this? I guess Apple is too busy counting all the money from us suckers who have bought their hardware and/or paid for music downloads from iTunes to take care of this.

I am having the same problem. I moved my files from an old Windows XP machine to a new Windows 7 machine. I put them in the "Automatically Add to iTunes" folder thinking they would all be added to my library and work just fine. Now I noticed that all songs for the same Artist get cut off at the same point in time. For one artist, it was 2:25. Any song shorter than that worked fine. Any song longer got cut off. For another artist, it was 2:17. It seems to be more with songs I downloaded from iTunes. Songs that came from CDs that I own and imported seem to be fine but I haven't checked every song. Any help Apple?

Files cutting off

My computer sometimes shows a window that says "Please Locate" and then gives a long file directory to a specific file its loking for. Problem is, these files are so deep in the file hierarchy that my window cannot show the entire file hierarchy, and I can't see the file it's looking for, 'cause it gets cut off. How do I fix this?

I have never seen any mention of the type of message that you are describing. I am also quite curious about the cause.
One thing that you might try the next time you get such a message is to look in your system.log and console.log files. There might be a message issued in one of those files at the time that you get the message on the screen. These two files are available via the Console app in the Utilities menu. Click the logs icon at the upper left and you will be able to select one log or the other.
EMAC G4 1.0 GHz Mac OS X (10.3.9)

My uploaded podcast cut off early

I have a podcast that uploads automatially from podbean.com to itunes podcasts. Each of my podcasts are being cut off on itunes about 15-30 seconds before the end. What is causing this? It is not only happening to me but to all who go to play the podcasts. On my podbean.com site it doesn't cut off, just on itunes.

Same thing has been happening for me. Certain songs, mostly purchased from iTunes, but a handful are ripped from CDs I owned are cutting out early - some halway thru the song. I have tried deleting from playlist, syncing, adding back to playlist, syncing, deleting song, redownloading from cloud, resyncing, etc. With inconsistent results. This is crazy! I don't have the time or patience to play Where's Waldo with all of my songs and go thru this ricidiculous routine.
There are hundreds of complaints about this problem on this board - yet Apple is silent. C'mon Apple, fix this - I have a lot of money invested in music and it's no good if I can't hear the whole song.

How do i repair dozens of songs that cut off early?

Over time more and more songs are damaged and cut off play about 30 seconds from the end. How can I quickly find the songs (maybe a hundred out of almost two thousand) that are damaged and repair them?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Flash CS3- exported movie cuts off right side edge of my fonts

I made a movie in Flash CS3. The exported SWF shows that the right hand side of some of my letterforms (made from a non-converted font) are clipped off. Switching fonts produces similar results. Is there some glitch in the program that I am no aware of?
Thank you-

Oh I see. No, it's just short words, upper and lower case. Nothing else as you described. The text was typeset in Flash.
I did some further testing, like switching fonts (again), enlarging the text bounding box, exporting the movie without anti-alias, converting the text to a shape (break apart twice), all to no avail. Most curious.
I should add that the text displays perfect in the .fla file. Just buggers up when I export to a .swf.

Bounced Files cut off at beginnings and endings.

Hello,
I am having trouble with bouncing files from Logic. This is a simple cut and bounce from Logic to create track IDs on CD. The problem is, after the bounce, the beginnings and endings are truncated with the result of awful clicks between tracks. The regions are meant to run continuously, and they do, in Logic. When I line them up in the burner program, though, they are not the same region length.
I have already tried increasing the division and adjusting the tempo and meter settings in the transport. As far as I can tell, the regions are exactly as they should be. I also checked the beginning and end times of the selected region in the bounce dialog.
What am I missing?

Hello,
I am having trouble with bouncing files from Logic. This is a simple cut and bounce from Logic to create track IDs on CD. The problem is, after the bounce, the beginnings and endings are truncated with the result of awful clicks between tracks. The regions are meant to run continuously, and they do, in Logic. When I line them up in the burner program, though, they are not the same region length.
I have already tried increasing the division and adjusting the tempo and meter settings in the transport. As far as I can tell, the regions are exactly as they should be. I also checked the beginning and end times of the selected region in the bounce dialog.
What am I missing?

Exported files cut off early

Similar Messages

Maybe you are looking for