Exported form pdf boxes not big enough to see and edit in on

how do I set the .pdf exported form to be able to expand the entry box so entrants can see the whole thing they've typed, and so when they print it, it shows the whole box... right now to make the form look small, and not just have big empty boxes, the spaces look smaller but have unlimited entry characters... but you can't see what you're doing with such small boxes that don't expand...is there a setting i'm missing?

No, you are not missing anything. The PDF can't be relayed out to show all of the text in the boxes. Only workaround is to make the text boxes larger
Randy

Similar Messages

  • In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's.

    In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's on several of the preferences pages.  The Apple people at the store did not help.  I have lownloaded the latest version of iTunes and this is still an issue.  HELP.

    Is there really nobody else with this problem? Really?

  • Numerator in Unit of Measure not big enough

    Hi,
    The numerator, field UMREZ, of the unit of measure has a maximun lenght of 5 digits ( maximum of  99999 ). But for certain conversion I need (in MM02-> aditional data->tab units of measure):
    120000 EA = 1 ROL
    How can I do this without entering something bigger than 99999?
    I have thought in three alternatives:
    1.- Modification of that data domain, so that it can be stored up to 999999.
    2.- Use decimals in the denominator , so that I have something like 12000 EA = 0,1 ROL.
    3.- With an auxiliar unit of measure EA2 ( created via CUNI, linked to EA): 10 EA2 = 1 EA :::::and then::::: 120000 EA2 = 1 ROL.
    I havent been able to complete the 2nd and the 3rd. ANd I want to avoid the first...
    Do you know if something like this can be done? if so, how????
    I have found post UOM conversion not big enough but I could not find any usefull answer in there ...
    Many thanks in advance.
    Aaron

    Hi,
    Yes, I had already read this note, thanks for the info anyways.
    They describe exactly my case:
    Example 3: Too large numerators and denominators
                           When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
                           Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
                           Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
    But I can not change the Basic Unit of Measure, because the Material has already movements, and I dont know how to create another unit of measure (let say EA2) linked to EA with a the value 1 EA2 = 10 EA. In this case I could use EA2 in the material with the conversion 12000 EA2 = 1 ROLL.
    Is this possible? How can I create this unit? in CUNI I can create a new UOM but I dont see how to link it with an existing one ( create a conversion between them ) .
    Thanks!!

  • My iphone 4s keeps saying it does not have enough icloud storage and cannot be backed up. When I go to icloud storage and backup, it says that I have 5.0 GB of total storage and 5.0 GB of available storage.

    My iphone 4s keeps saying it does not have enough icloud storage and icloud cannot be backed up. When I go to icloud Storage & Backup in my settings, it says that I have 5.0 GB total and 5.0 GB available. The only thing I have selected, at this point, to be backed up are my contacts and the Find My iPhone app. Why does it always say I have no icloud storage available when I have ALL of the icloud storage available?!

    It says that my next backup size is 7.3 GB, but I have no idea why, because the only thing selected is the Find iPhone app, which takes up 0.2 KB...How do I get rid of whatever it THINKS it's backing up?

  • I exported a pdf file to word but i can't edit

    I exported a pdf file to word but i can't edit. What am I doing wrong?

    Hi hc69,
    You're most likely doing nothing wrong! For starters, please try triple-clicking in the text that you want to edit in Word.
    If that doesn't work, it may be that the PDF was created from a scanned page, and that OCR (optical character recognition) wasn't performed on that PDF to convert the scanned/image text to selectable/editable text. OCR is enabled by default when you convert via the ExportPDF website, but can be disabled in Reader. Please see How to disable Optical Character Recognition (O... | Adobe Community to make sure OCR is enabled.
    Let's start there. If neither of those solutions work, we can take it from there.
    Best,
    Sara

  • MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

    I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
    My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
    Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
    Thank you.

    You have at least 3 different ways to show the project library:
    1) Go to WIndow->Show Project Library
    2) Click the button in bottom left of your window: 
    3) Hit the keyboard shortcut (Command-0)
    The project library will be shown, occupying the area where the timeline usually is.
    Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

  • When I create a photo stream in ios6, everyone who is logged in to my iCloud account can see and edit my stream (on their iPhones only). Not just the email addressees that I sent the photo stream link to. Is that how photo stream security is meant to work

    When I create a photo stream in ios6, everyone who is logged in to my iCloud account can see and edit my stream (on their iPhones only). Not just the email addressees that I sent the photo stream link to. Is that how photo stream security is meant to work? Is so it means my whole family can see any photo stream I set up. Hence no security? Can't share the pics with the wife then :(

    The whole idea to an icloud account is that one user uses it and has all their devices synced together.  Different users need different Apple IDs to create their own icloud accounts.  Note that everyone can still use the same ID for an iTunes account (to share purchases).
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • Crystal Reports 2008 export to PDF does not render Japanese fonts

    Hello,
    I have searched the forums for this issue, and there does not seem to be a clear resolution to this problem.  We are using CR2008 to create RPT files that are bundled with our custom .NET 2005 application, which then generates reports in PDF format by running the RPT files against an access mdb database using the CR2008 runtime (our application is deployed on a different machine than the one that is used to create the RPT files).  The issue we are having occurs when data in the access mdb file contains Strings with Japanese characters.  The system that our application is running on does contain the eastern asian language fonts so if a user opens the mdb file using access, they can see the Unicode strings in the database rendered properly (rather than the usual boxes and garbage).  However, once our application generates the report filling in the rpt file with data from the mdb and exporting the report to pdf format, the entries that should contain Japanese font data, which leads me to believe the problem is in the export pdf function of the crystal reports 2008 runtime.  Is there anyway we can configure the runtime to properly embed the fonts in the PDF so that the users can view the Japanese content from the database.  Our users end up viewing reports on both OSX and Windows using Adobe Acrobat Reader.
    Thank you very much in advance

    Thanks for the quick reply!
    1) Exact version of Crystal Reports. (Open Crystal Developer. Go to Help> About Crystal Reports).
    12.0.0.683
    Type: Full
    2) What happens if you export the report to PDF format from the standalone Crystal Reports Designer?
    Same result.  The entry shows up as giberish in the report designer preview...however, by doing this I stumbled upon something.  See below
    3) Are you able to export the report to other formats without any issue?
    See Note below
    NOTE:
    In another part of the report, I just put the fields in question directly in the report (that is, not embedded in a text object).  That part of the report when run produces the correct non-gibberish, properly rendered Japanese result (in the CR designer preview).  The same field, however, when embedded in a text object, results in the gibberish being shown in the designer preview as well.
    Now when I export this to PDF, that ends up turning both areas into the incorrect, gibberish result.  Both the one that did properly render in the preview (field not embedded in text object) and the one in the text object.
    Exporting to any other format (tried xls, rtf and html) results in correct rendering for the field not embedded in the text object and incorrect rendering for the field embedded in a text object.
    Hope this helps with the problem, and I think it means this thread probably still belongs under this current forum.
    Cheers

  • Export to PDF - Does not embed font

    Hello,
    I have created my CV in Pages. However when exporting the file as a PDF, my chosen font refuses to embed/render when I open it on a Windows computer. The specific error is:
    Cannot extract the embedded font 'LSHFUS+MuseoSlab-100'. Some characters may not display or print correctly.
    The resulting PDF displays correctly on my Mac, iPad and iPhone, but not on any Windows computer.
    Can anyone suggest what I might do to get this to work in Windows, and whether there are other applications available that help with exporting Pages documents to PDF?
    Thanks,
    Saj

    snkhan wrote:
    Thanks for posting the links Koenig, hopefully we can figure out whether it is a font issue or a Windows issue. It's impractical to stop using non standard fonts, so I really don't want to go down the route of just using Arial/Verdana in my documents.
    I'm not the one urging you to do that. I think that we must be free to choose our fonts (even ugly ones if we want and I must say that I see most ugly ones than well formed ones).
    I did what I was able to do:
    I downloaded the fonts, used them in a document.
    Print a PDF , export a PDF.
    Then, I stored the two PDFs on a memory stick which I connected to an other machine which don't know what is MuseoSlab 500.
    The result is exactly the one which I got on the first machine.
    Also, how can I check if the font subset was embedded correctly in the PDF?
    Given the behaviour described some lines above, I assume that the embedded subset is correctly formed but, I can't guarantee that.
    This is why I asked peter to test because if I understand well, he has access to both operating systems.
    Yvan KOENIG (VALLAURIS, France) mardi 10 août 2010 16:58:50

  • Error while exporting to PDF - Operation not yet implemented

    Hi,
        We using C# Dot Net 2005 and Crystal Report for Dot Net 2005 and we are trying to export to PDF file.  In one of the reports, we are using a Font "Shree-Kan-0850' from Shree Samhita, a SDK to build application in Indian regional languages. But we are getting an error as follows:-
    "Error in File C:\Document~1....\{....}-.rpt: Operation not yet implemented.". When we tried in various sites and forums found that it was due to some non-standard fonts. We have checked that if we remove Shree-Kan-0850 font from report, it works fine and once included the error comes. So problem might by from this font. Whether Crystal report is not supporting other than Windows standard fonts or the problem with PDF? Because with same font we can export to DOC, XLS etc. Please guide us how to solve this?
    Thanks and regards,
       Rajeev Vandakar, Bangalore.

    Unfortunately, it looks like that font has many issues. Googling 'Univers Condensed Fonts .net' gets a number of interesting posts. E.g.;
    Univers 67 Bold Condensed Font does not show in my Flash Fonts List
    See if you can select the font in the properties window of the VS.NET IDE.
    It would also be interesting to see if the following will work in a new test app:
    Private Sub Form1_Load(ByVal sender As System.Object,
    ByVal e As System.EventArgs) Handles MyBase.Load
         Label1.Font = New Font("Univers 57 Condensed Font – Univers 57 Condensed", 12, FontStyle.Regular)
    End Sub
    - Ludek

  • Export to pdf links not active

    When i create a pages document and export to PDF, the web page links are not active, even though pages says the links should be active in the PDF's i create. Whats up? Anyone

    This forum is dedicated to the program Pages in iWork '08. I suggest you ask your question about Word in the Microsoft Office forums.

  • I have Accounts forms that do not have enough lines, can I add them?

    So, I have account forms that I have for religious purposes. I did not purchase a copy of Acrobat Reader XI, which the forms are made with and are fillable. Unfortunately, they do not have enough lines for the expenses. If I purchase Acrobat XI, will I be able to add lines?

    Acrobat can edit the interactive form fields, but it doesn't generate the underlying page content - that comes from whichever original program was used (Word, InDesign, etc.) and that's where you would have to go back to if you want to add lines to a table, etc.

  • Exporting to pdf does not take the SummaryInfo properties

    Hi,
      i am setting all t he properties of the ReportDocument.SummaryInfo  and then exporting to .pdf, but only the title gets exported.
    second there are properties get set in the .pdf automatically by crystalReports without having the power to change them like:
    Creator, Producer.
    is there a possibility to change them.
    third is there a possibility to encrypt and sign a pdf through crystal reports?
    Regards.

    At least one of the 3rd-party Crystal Reports Desktop Schedulers listed at http://kenhamady.com/bookmarks.html provides that functionality (automating the process of exporting to pdf, setting properties using static or dynamic information from the report, protecting the pdf, etc.).

  • There are hidden pages in the PDF form I have.  How can I see and print all without clicking on the

    I have hidden pages in the PDF form I'm using (but didn't create).  How can I see and print all the pages at once without clicking on the "next page" button.  In the initial view, there are four pages, but if I click the "next page" button, there are a total of 12 pages in this document.  This is three budget years, each year being 4 pages long.

    You're most likely dealing with a dynamic XFA form created in LiveCycle Designer. You can open it, click the button, and save it, and it will most likely be 12 pages when next opened, but it depends on how the form is set up. The ability to make edits to an XFA form in Acrobat is very limited, especially for dynamic forms, so things like flattening aren't possible.
    If it's not an XFA form, you'd still need to click the button at least once and save. To say for sure what's possible, I'd need to see the document. Can you post it somewhere?

  • Bought a Mac Mini.  at 18 day's old it started to lock up and not function.  Took it in and they wiped and reinstalled it.  Well at 24 day's old it's been sitting in the box not being used.  First and last Mac for me. But can I get something for the junk?

    I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes..  So many people told me Mac was the way to go...  1500 dollers could have bought me a great pc laptop.  Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US.  While I have junk..  It's still under warranty and I reinstalled the os after the new mem sticks.  Again.. locks up and does nothing.  What can I do with this?  Toss it in the trash?  Any info on what I might do with it.. Please help!

    It would be most helpful if you updated your system information:
    Please reconcile the following
    at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
    ... I reinstalled the os after the new mem sticks.
    If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
    If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
    "Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
    If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
    You must clear up these uncertainties before anyone can help.

Maybe you are looking for