Exported from Premiere as NTSC, but Encore thinks it's PAL - Help!

Encore 3.0.0.268
Source video: AVI, 29.97 fps, 720x480, 32kHz 16-bit stereo
Exported from Premiere Pro to Encore with the following settings:
NTSC, 720x480, 29.97 drop frame [fps], Lower, Quality 4.5
48 kHz, 16 bit, PCM
VBR, 1 Pass, Min 2.02, Target 4.78, Max 7.00 [Mbps]
But!... when I open the project in Encore, it only lists PAL options. For example, if I try adding a menu, it adds the PAL version instead of the NTSC version (which does exist in the Library folder). If I remove all the PAL menu files from the Library folder, then it doesn't list any menus at all for this project (except a couple HD ones) - ie, it's ignoring the NTSC menus.
Also, if I look at the Transcode Settings, the only choices are PAL.
NOTE: I already have NTSC set as the Default Television Standard in Encore General Preferences.
Why does Encore think the video is PAL? How can I make it think otherwise without redoing the whole export in Premiere?

See reply in
duplicate post

Similar Messages

Adobe Dynamic Link or Export from Premiere and load into Encore?

Hi
I'm making some tests about authoring DVDs and Blu-Rays from Encore CS6. My video editions are made in Adobe Premiere Pro CS6.
Looks like I have 2 ways to send contents from Premiere Pro to Encore.
1) I can set all my editions in Premiere Pro, then Export the entire timeline to a MPEG-2 DVD or MPEG-2 BLU-Ray file, then start a new Encore project and import this video file as a timeline.
2) I can finish my editions in Premiere Pro, then use the Adobe Dynamic Link > Send to Encore options. So, it's not necessary to export files, since the task of transcoding is an Encore's task.
Question is: Any advantage of using way 1 or 2??? Thinking about speed to finish the job, is one way better than other?
What do you use do choose?
Thank you for these tips
Gustavo.

Hi Stanley
Thank you very much for your tips. Just one thing:
In Premiere we can choose, for Blu-Rays, the MPEG-2 or H.264 codecs. You mentioned the H.264 Bly-Ray choice.
Any advantage regarding the H.264 instead of the own MPEG-2 coded?
Best Regards and thank you very much again.
Gustavo.

Why is video size different to original when exporting from Premiere Pro CS6 to Encore?

Hi there
My source files in Premiere Pro are 1920 x 1080.
When I export the sequence to Encore to burn to a DVD the size in the burned DVD changes to 720 x 576
In Encore project area I have these two entries
The encoding settings for the above two entries are
this (for the first entry above)...
and this (for the second entry above)...
It does not seem to be possible to change the encoding to 1920 x 1080 for the first enry and as such the video is being burned as 720x576.
How can I fix this? What am I doing wrong?

DVD is 720x576 you cannot change that.
If you want 1920x1080 which is HD you need to make a BluRay.
You can however make an AVCHD disk which is HD on DVD.
About 20 minutes will fit on a DVD and will only (but not all) BluRay players.

Exporting from PREMIERE to ENCORE (Correct Settings for crisp and clear DVD playback)

Please help. I have tried exporting a Premiere CS6 movie project to Encore, and when I play the burnt Encore DVD on my DVD player, it plays back fuzzy and it actually bounces. Here is my question: What are the correct Premeire CS6 export settings/ Encore DVD burning settings to get a normal, crisp and clear DVD playback?
This project is due tomorrow!!! Any help is much appreciated!

Export from Premiere as MPEG2-DVD.
Import and burn resulting file(s) in Encore.
You can twerk your Bitrate Settings on export to increase quality.

Adobe media encoder extremely slow VS export from Premiere,Why?

I am exporting a 30 min AVCHD to QT NTSC DV widescreen. When I sent it to AME it was taking an extremely long time,it said it would take 8 Hours! When I put it to export straight from Premiere it only took about 25 minutes.I have CS5 on my laptop and it did not have the same problem when I sent it to AME, it only took about 20 min. I tried uninstalling CS5 and reinstalling but that didn't work. This is frustrating because I need to export a lot of files in different formats. Anyone know what can be causing this
I also tested this exporting in other formats such as MPEG2 DVD and it has the same issues.

If you queue or export from Premiere the resize will be done by the Mercury Playback Engine (ie the nVidia card does that grunt work) which makes it A LOT faster (like 4-10 times).
If you drop a file into AME directly it's done by the CPU.
Is that what you're doing?

Exporting from Premiere makes my video washed out. Thoughts?

Hey Forum!
Question of about exporting from Premiere CS6.
When I export a video, and open it in Quicktime, the image has lost contrast and color saturation.
Does anyone have a solution to this?
I've heard about x264 but haven't tried it. Has anyone had success? A simple workflow they can walk me through?
I also heard that you could send your sequence to After Effects, change the color space to 709. Has anyone had success
with this workflow?
The only time the video looks nice is playing it in FLV. But in the real world, who actually uses VLC?
The strange part is if I look at the raw video it looks great. Bring that clip into Adobe and export it (no color correcting, or anything done to it) and it comes out desaturated with less contrast. I would think if you did absolutely nothing, it should come out the same right?
Last note, I am not using an external monitor. (Because I know many in the forum willl suggest this) I would like to just get the video out looking the same as it does in the editing system to play back on my desktop. I'm not interested in worrying about other TVs, computers, etc.
Any help would be hugely appreciated:)!!!!

That's my point. Not worrying about other displays.
Why does the raw look one way, on my desktop, then I bring into premiere, export the same clip, and it looks washed out and less contrast on the same desktop, same computer as the initial evaluation of the Raw.
Evaluating with or without the signal conversation, why is there a change when I have done nothing?
Hopefully this makes sense.
Is the 709 conversation relevant?
Is the Gamma conversation relevant?
I de-selected the Gamma (auto default) using the 422 HQ codec, and that did nothing to the color.
I'm wondering if there are other boxes to click/un-click.
Thoughts?! Thanks you!

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

Why are files going offline when exporting from premiere

Hi all
I've got a feature length documentary of 2 hours. All files are online but upon exporting from premiere via media encoder the finished file has 'media offline' on some shots. I have NO idea why this is happening. All clips are online on the timeline.
I'm exporting both blu-ray mpeg and dvd mpeg. The project is on an external hard drive. Can anyone help this is a nightmare!?
Will exporting via premiere pro direct fix this problem?
Thanks

Can't you see how the video is pixelated? Mainly around the nose and forehead?
Nope. Looks fine when I watch it.

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

How do I export from Premiere Pro CC to Final Cut Pro X?

Here are my system specs:
iMac (late 2012)
Fusion Drive
Processor 3.1 GHZ Intel COre i7
Memory 16GB 1600MHZ DDR3
OSX 10.9.1
Running
Premiere Pro CC 7.2.1
and FCP X 10.1
Hello there,
I have a fairly complex 3:00minute sequence that I want to export from Premiere using XML and then import into FCP X.
I exported and the tranlation error log was too long so I duplicated, shortenened and simplified the sequence and the translation errors seemed much more manageable. I quit premiere pro and ran FCP X. Import->XML And the XML files were all greyed out! I couldnt even select them. I tried compying the entire project file including a copy of the XML into FCP and still no luck. Am I missing something here?

Jim, some people (maybe not that many) are FCP X editors, so it's a good feature.
Also, I personaly find Premiere 10 years back in terms of editing. FCP X in my opinion has more editing features to make my life easy. The last release has also been a great update.
I have been editing in Premiere the whole year 2013, and I can't go back to the "old fashion" editing since i started editing in FCP X. but that's a matter of preference. The problem is that the other editors in my office use Premiere, so XML exchange is a must.

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

Why can't I export from Premeier Pro CS5 to Encore CS5?

I have edited, renderred, and attempted to export to Encore to attempt to transfer to DVD
Premiere Pro CS5.5 with 5.5.2 update just downlaoded today
Windows 7 64 bit
Source AVCHD 1080p 25 Anamorphic
Error: ..\..\src\AMEPresetProber.cpp-265
I wasa exporting from Premiere Pro to Encore
This HAS worked before
No other software running
No other codecs loaded, that I know of
AMD Phenom IIx4 955 processor
No Mercury...Acceleration

Hi Devongeoff.
Thanks for your post. This error will not come if you try to change the user account or create a new user account. Once the Project is finished, uninstall all the adobe application and use cleaner tool and re-install them once again.
Regards,
Vinay

Problem: Nothing happens when I queue export from Premiere CC.

As above.
I do a basic queue export from Premiere, Media Encoder launches, then nothing is queued for render.
Help thanks.

Hi Dmitri,
Thanks for your quick response!
- It is no problem to take the sequence and drag and drop it in the AME
- Yes, I can save the project and open the purport in AME
- Build number of PPro = 8.2.0 (65) build & AME = 8.2.0.54
- It is no problem to create a new preset in AME and to select MPEG2
For your information, there is no project that I can export from PPro to AME. This morning I send a new project to AME and suddenly AME was failed to finish the render that was already there. Because of that I quite AME and starter again. But from that moment it was not possible anymore to send projects bij PPro to AME….
On my other system the export from PPro to AME is working well.
So… I don’t know what the problem will be.
Regards,
Aswin

AME freeze during export from premiere

Hi, I have the same problems by using AME since CS 5.5... now I have AME CC 2014 but the problem is the same.MAC OSX
I'm on MAC PRO OSX 64GB Ram, 2CPU XEON, 2 Graphic card AMD Fire Pro 700 2 x 6GB.
When I export from premiere using adobe media encoder, and setting OPEN CL HW acceleration, some times it freeze and i have to restart the mac pro forcing it.
The only way to export is disable GPU but it needs longer time to do the compression.
I want to use GPU OPENCL, i bought this macpro with 2 graphic card so I want the faster way to compress... how to do?
I noted that the problems happen when the project has big images inside such as more then 3000px width.
The strange thing is that if i compress the same project on a windows OS, with CUDA NVIDIA card (2GB) it works...
I understood that with the new AME release (CC 2014) this problem was solved but i see not.
Pls let me know
Thanks
Bye

Moving to Media Encoder forum... and some links to read that may help
Some 10.9.3 links
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Exported from Premiere as NTSC, but Encore thinks it's PAL - Help!

Similar Messages

Maybe you are looking for