Exported Image Doesn't Match Export Presets After Use of Straightening Tool

Unlike my experience with previous versions, in Aperture 2.1, after applying the "Straightening Tool", I cannot get an exported image to match the dimensions set for "Export Preset." The results are a reduction in size.
It appears that the output is being based within the rectangular confines defined by the out of view corners of the rotated image rather than that of what is actually being displayed.
Is there a new method I am missing or is this a bug?

So, like really, no one has experienced this problem?
The resulting dimensions of the exported image, which was rotated by the "Straightening Tool" are smaller than that of the export image, of the same picture, not rotated, but with the same "Export Preset" selected.
Example:
I want all my exported images to be a dimension of 200 x 300 pixels. Those exported without the "Straightening Tool" applied are exactly 200 x 300. Those, say with a 10º "Rotate" applied to the original and, exported with the same "Export Preset" dimensions, result in an image which is 145 x 216 pixels in dimension.
This is very unlike Aperture 1.5.6, in which the exported output of both image versions would be identical, at 200 x 300 pixels in dimension.

Similar Messages

  • Step Back after using the straighten tool

    My work flow ends with the straighten tool, but sometimes I'm not happy with what I've done. Thank God this does not happen often, but when it does I have had to go back to start with my PP in ACR. HELP, HELP, HELP

    I'm afraid that is how it works. Once you have opened the image in Photoshop you are no longer doing anything with the original raw file. You have loaded the pixels from that file into Photoshop, but they are the pixels that have been modified by the metadata.
    But you should only have to return to ACR to change the strengthening, unless you have done a lot of additional editing in Photoshop. Perhaps it would be better to do the straightening as a first step in Photoshop.
    I don't know about you, but since I have been using ACR 4.1 I find that I can do a lot more in ACR and considerably less in Photoshop.

  • After using various retouch tools, Aperture often returns to the original image and I can't get my retouched image back....any ideas?

    After using various retouch tools on an image, Aperture often (but not always) spontaneously returns to the orginal image and I have to start all over again.....this seems to happen most often after I use the clone tool.  Is this a new bug or what?  It just started happening a few weeks ago. 

    I fond the answer. Inexplicably,some of the song tracks, the 'deepest' files in the structure, had become hidden. There was no clear pattern - most of my music files come from CDs, with a small number of legal downloads (mostly from iTunes). So although the artist and album folders were not hidden, if there were no unhidden song files in the album folder, apparently iTunes skipped the artist.
    Changing the attributes of all music files to unhidden took care of everything.

  • Dark path's edges after using shape builder tool or masking objects

    hi,
    i have a problem with path edges after using shape builder tool or masking objects. This problem occurs when i draw bright colored objects above dark colored object. After that i have dark path's edges. Like this: http://img94.imageshack.us/img94/2051/dlm2.jpg     
    I have one solution (pathfinder->dive objects and delete some dark elements on the bottom) but maybe someone know another solution for this problem?

    Thank you for reply
    Unfortunately, I don't have opportunity to print it, but as you wrote, it must be a screen artifact. I exported this file to tiff, then i opened it in photoshop. Everything is ok. All of the edges are clear.

  • After using the clone tool my keyboard freezes up. Why?

    I am running Mac 10.6.8 and CS 5.5
    Photoshop: CS5.1
    After using the clone tool my keyboard freezes up. Why?
    When I use the clone tool repeadedly i can no loger use my keyboard.
    And that includes use for other applications.
    I have to do everything manually by scrolling down the menu bars.
    Also, I can't even type in any characters from the keyboard.
    Thanks everyone smarter than I.
    Vinny

    Thanks C,
    (Sorry I don;t know your full name.
    I followed your instructions and reset my preferences.
    Crossing my fingers.
    On another topic. I am running Design CS 5.5
    But when I checked "about Photoshop it only reads CS5 12.1 x64.
    Also, my prefs read CS5.1
    Please advise.
    I also seem to have prefs I may not need. I thought when I installed 5.5 my
    old Photoshop version prefs would be deleted but they are still there (see
    my snapshop of my pref files. Should I trash any?
    image: Inline image 1
    Thanks again C,
    Vinny
    On Wed, Jan 15, 2014 at 11:18 PM, c.pfaffenbichler <[email protected]

  • Photoshop just disappeared from my mac after using adobe cleaner tool.

    Photoshop just disappeared from my mac after using adobe cleaner tool. Can i somehow resurrect it to my mac?

    The cleaner remover Photoshop and cleans up thing the might have  been causing installation or updates problems so you have a clean slate.  Now you install Photoshop it should install correctly and update now.

  • Image doesn't match when previewed or exported

    Ok, so I have just recently upgraded to the latest version of FCP studio and have been having the weirdest problem with it.
    I'm working on a project with two layers of video (a full-screen image with a small box insert. The insert video plays fine but in five spots (out of an eight-minute-long video) the full screen image doesn't play the clip that's put in there.
    I've double clicked the clips to verify that they're correct and they look fine on the preview monitor. I tried going in and finding the original shots and replacing them but they are still showing up as the incorrect shots in the sequence monitor. I tried going in to the render files in the document folder and deleting and re-rendering. The problem still re-occurred. I then took off the insert for those clips, rendered, and they looked fine but then when I exported to Quicktime then the wrong images re-appeared in the exported file.
    Does anyone have any ideas of what may be going on here, how to fix it, and/or a good work-around?

    I wonder if this has anything to do with the MacBook Pro problems?
    http://www.apple.com/support/downloads/macbookprosoftwareupdate11.html
    That said, I'm not sure I'd run the 1.1 update if you hadn't run the 1.0, there were so many problems with the 1.0...
    Are you using filters, or just resizing the overlaid video track?
    Patrick

  • "Damaged" fonts in pdf file after using TouchUp Text Tool

    Hello,
    I have a question regarding an issue with lost fonts in a pdf file.
    The document was created in Adobe InDesign and printed to pdf.
    However, after using the "TouchUp Text Tool" in order to check the font for a certain text, several attributes of the font have been damaged in the entire pdf: all characters in "small caps" have been transformed to regular.
    We've had 3 cases so far.
    Does anyone know how we can prevent this from happening again?
    When exporting the document to pdf, all fonts were embedded, I am not sure if this can be the cause.
    Thank you in advance for any suggestions!
    Paula

    We are using Adobe 8 Professional.
    Bill@VT, I am not sure what you are asking me
    I have checked the Preferences for the pdf file and the "Use system fonts" case is checked.
    When opening the pdf file, the fonts were ok, but somewhere along the process, the small caps were lost.
    Maybe a print screen will be of use: the presentation above is the correct presentation (the one immediately after exporting to pdf); the presentation below is the one after all fonts were damaged.

  • Bizarre file size saved after using Pen Selection Tool in CS4/3

    Bizarre file size after using and saving pen selection. Image file  size = 69.9mb at 300ppi for 14.2 x 9.5" image. If one crops the image about by hal and saves it, the file size = 34.2mb. If one uses the pen tool and selects the same area that was cropped, the file size = 75.1mb... this is crazy. I don't think the PS is saving it as a 32bit rather than a 16 bit.
    Any ideas of what's going on. Nvere have encountered such a problem in the past.
    Thanks
    Joe9111

    Please post in the Photoshop forum.

  • A question about using the history tool after using the extraction tool in photoshop cs3..

    For example:
    http://www.layersmagazine.com/photoshop-...
    When I use the history tool, it erases the image instead. Whats up with that?

    G'day Chris
    I can't tell from the link exactly which tutorial you mean!
    If the original layer is a white background and the snapshot is set to this then the history tool will paint back white even if you then paste or drag an image onto the layer above this.
    You would have to take a seperate snapshot of your image layer and set this layer as the snapshot you want the history tool to use before you start working on it.
    One neat thing you can do is if you paint back some detail with the history brush you can immediately go to Edit > Fade and fine tune how much of the effect you want to apply.
    Hope this helps.
    regards
    John

  • Pen tool not reconnecting after using convert point tool to reajust?

    Hi
    I was wondering if anyone had come across the problem pen tool not reconnecting afer using convert point tool to reajust? sorry if you don't understand what I mean, basically I can't reselect my pen tool to its path one doing another similar type task with another pen tool task.
    thanks,
    helen

    http://forums.adobe.com/people/Larry%20G.%20Schneider
    Larry,
    I Just tried the solution you gave. It did not work. I still have 1 point vectors in a very small image. The image is a simple drawing of a map. I just want to size it to fit a smaller page size.
    Elaine

  • Viewer image doesn't match selected image for Panasonic GF1 imports

    I just discovered that when I view an image in a project, the large displayed image reverts to the last displayed image in the LIBRARY>Photos.
    This only happens to projects which I have imported from my Panasonic GF1 (after making the modifications to the Raw.plist and the RawCamera files.

    I figured it out. After removing the trial app and re-installing the paid app, my modified RAW system files were replaced as well. That's why I could only see the thumbnails.
    Message was edited by: Kenneth Epstein

  • Apple TV image doesn't match computer screen

    We have a new Apple TV and are able to navigate using the TV screen to access content, but our MacBook Pro which is "synced" to the Apple TV displays different content and seems to operate independently. Any ideas on how to have the TV display and laptop monitor match?

    Welcome to the  Discussion Forums.
    Your MBP and the tv are different devices and work independently of each other, the display attached to the tv is not supposed to mirror your MBP display.

  • Off button doesn't turn off iPhone5 after using third party car charger.

    After trying to use a third party car charger from Amazon.ca, my iPhone5 no longer shuts down by holding down the power button.  Also, when I want to put the phone to sleep and push the power button quickly, it doesn't sleep so I have to hold it down for a couple of seconds.  Sometimes it doesn't sleep at all.  I tried restoring my phone but that didn't help the problem.

    I would check your serial number here, https://ssl.apple.com/support/iphone5-sleepwakebutton/ , and see if your iPhone may be one of the devices that qualifies.

  • Kodak imaging doesn't work on Windows 7 using compatibility mode

    Hi,
    I want to run Kodak imaging on windows 7, I have register the OCX files correctly  but when click on kodakimg.exe nothing happening.
    i try to change the compatibility mode to windows 7 but nothing happen too.
    Please help me.
    Regards

    Hi,
    The Kodak Imaging for Windows program and the related controls are not included with Microsoft Windows XP and higher.
    Imaging for Windows XP Professional Edition and higher is now provided by Global 360.
    For more information. Please see:
    Kodak imaging for Windows is not included with Windows XP
    http://support.microsoft.com/kb/308979
    If you are using Windows 7 Professional, Windows 7 Ultimate and Windows 7 Enterprise, you may have a try to run this software in Windows XP Mode.
    More information about Windows XP Mode, please see:
    Windows XP Mode
    http://windows.microsoft.com/en-us/windows7/products/features/windows-xp-mode
    Hope this helps,
    Ada Liu

Maybe you are looking for

  • Simon game. buttons wont flash... help!

    This is a simple "Simon" memory game, produced in GUI........... The main(); invokes the FIRE(); which generates random numbers , which in turns invokes one of four COLOR methods, red(), green(), yellow(), blue(); .... These methods flash one of the

  • 10.6.8 in software updates but not installing

    I am having issues with installing software updates for my iMac.  I had to manually download and install the 10.6.7 update (I chose the combo) from the apple site. It shows that the update is downloaded in my software updates but it will not install

  • Can not unzip the zip file of AIR 3.4 beta2 sdk for windows

    http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/air3-4/air3-4_p2_sdk_win_0807 12.zip the file can not be unzip.

  • New to iOS, have a upload download question

    New to iOS have a 5s, need to download music from websites and files also need to upload files is this possible on iOS devices

  • OS4 on IPHONE 3G made IPHONE TOO SLOW !

    I have an IPHONE 3G and just updated to OS4. The IPhone now is a LOT slower than before... Is that normal? Should I do something? Thank you for your help ! Edson