Exported Jpeg's when sent to photo lab print too dark

I have had consistent results with exported jpeg images that look fine on my monitor (as raw files)and show in the histogram in lightroom 2.5 as the highlights just starting to clip as printing too dark when sent to a photo lab in SRGB. Is this a fault of my monitor? I have calibrated the monitor, a Dell S2409W, using charts on the website at http://www.normankoren.com/makingfineprints1A.html but this still happens. Will darkening the Monitor help or will the images still clip at the same point? I have been able to send a second image with the exposure and or brightness boosted a bit and they print brighter, but this is a pain. What is the best way to correct this so that I can see the same image as I get back from the lab?

hello henrykipson,
you said that you want starting an professional laboratory business,i can talking about this because i had a laboratory until some years ago .i hope that you made some artistic study,so it's more easy for you to learn this topic.you must study,an pass an examination for take an artigianal licence that allow you to open this activity ,the licence given you the opportunity to work either for sale photografic material either to shoot and developing,one time that you had pass this examination you must gone to the police autority and inform these of your business (is under police control.because you work with chemical material,and also because you had a reservate people information,and they must given you their assent.)after all you can start to buy a good developer and print machine beyond to have a dark room.for manual print.you must decided if do you want work in black and white or color.You can do both but is better to specialize by one of them ,like you want.
Remember from the digital events many people print his image at home,you must deciding maybe is better to work with a professional photographer,that can given you more work.itsn't easy.you must have a good preparation because ,they are more exigent.The good results depend also from the quality of your works.a good machine,good chemical product,good upkeep,of your laboratory.(in italy this is the procedure,i think also in other country,because is a ticklish question licence.)I hope that this my little explanation are useful to you.Good luck .
cheers alessandra minotti

Similar Messages

Photos are printing too dark

Hi, I use Aperture 2.1.4 to edit my photos and my imac is running OSX 10.6. I have recently purchased an EPSON Artisan 730 and am not sure what I am doing wrong but my photos are printing darker than they appear on the screen.
The setting in Aperture are
Paper size: 10x15cm
Orientation: landscape
Colorsync profile: PX830 730 Artisan837 730 Epson glossy
Black point compensation not ticked
gamma: 1.0
sharpen amount: 0
sharpen radius: 0
scale to: fill entire page
print resolution: use best dpi ticked
Please can you offer any suggestions or point me in the right direction.
Thanks

Léonie kindly asked me to add to your thread. Other than the links you'll find in the post of mine to which Léonie already linked (I don't sense that you've read them), I can make the strong suggestion that you upgrade Aperture to the current version (and upgrade to 10.6.8 or 10.7.x, too). Apple has been steadily working on color and luminance fidelity (it's a difficult problem), and has made significant changes to the rendering of Images in the OS and in Aperture.
It is odd that you made no changes in the software calibration process. Redo it?
Here are some general considerations to be aware of:
https://discussions.apple.com/message/17216135#17216135
And an even shorter summary here:
https://discussions.apple.com/message/17539316#17539316
Don't be overly discouraged by the complexity of the topic. With some work you should be able to get reliably close. Whether "close" is close enough is for you to say.
I print (to Epson Printers, but that shouldn't matter) with "Rendering Intent" set to "Perceptual", and "Black Point compensation" checked. The second is perhaps impossible to ascertain, but the first should change the luminance distribution visibly (depends on the photo). These, however, are refinements. You have to get "close" first.
Here is the first thing to check after confirming that your printer is working properly (sorry for quoting myself):
The quick answer -- now that you've got this far -- is set your monitor brightness to something that appears gray rather than light. This is probably close to the middle of the available range, and two or three steps lower than you might chose for comfortable viewing. Implicit in that is that what is best for editing photos is often different from what is best for doing other work on a computer.
Post back with questions.

My photo book printed too dark

Hi. I ordered a book via iphoto and the pictures were WAY too dark. Is there a contact person somewhere in iworld that I can call about adjusting the heavy ink?

Apple guarantees satisfaction - see - http://www.apple.com/support/photoservices/returns/
What color profile are the photos - sRGB is the best - many people have reported that using adobe RGB causes very dark prints
In general less editing is best - and using iPhoto is better than PhotoShop or other editing programs -- http://www.apple.com/support/photoservices/preparation_tips/
LN

Photo is printing too dark

I am printing from Lightroom 4 to to an Epson Artisan 1430. I'm using a generic glossy paper. I have the print settings set to this, along with best photo and have the print management in Lightroom set to printer. I have tried printing 3 images now from a batch of photos. They all appear under exposed. I'm printing a 6x6 photo. When I print it as a 2x2 the exposure is better. I then chose another photo that was shot in .raw format in a much higher quality just to see if it was the photo set before or the possibly a setting. The single photo printed out de-saturated which leads me to believe I'm missing a setting somewhere. Does anyone have any suggestions as to what to look for?
Thanks.

This is not a known issue with any Adobe products.
But Epson has had a lot of problems with their drivers in MacOS 10.9.

Photo book prints too dark

The large hard cover book I ordered through iPhoto came back way to dark and saturated. What happened to ColorSync and should I expect a better print product from Aperture?

Apple guarantees satisfaction - see - http://www.apple.com/support/photoservices/returns/
What color profile are the photos - sRGB is the best - many people have reported that using adobe RGB causes very dark prints
In general less editing is best - and using iPhoto is better than PhotoShop or other editing programs -- http://www.apple.com/support/photoservices/preparation_tips/
LN

Hello, I have a Windows 7 Pc where Lightroom 5 is on installed. When I open a photo using " verkenner" I see a good coloured photo. When I open a photo via Lightroom 5, the photo will be too dark. This gives difficluties during shaping the photograph. C

Hello,
I have a Windows 7 Pc where Lightroom 5 is on installed.
When I open a photo using " verkenner" I see a good coloured photo.
When I open a photo via Lightroom 5, the photo will be too dark. This gives difficulties during shaping the photograph. Can someone help me to solve this problem?
Kind Regards,
Marianne

Into the Develop module Not all the sliders in the Basic Panel are at 0.
Temperature ° is on 5600
Colourtint is on + 30
Balans: slider in the middle
History panel:
Balans gespitste tinten -3 0
Balans gespitste tinten -3 3

Installed Yosemite and iPhoto 9.6. A lot of my photos are much too dark now and the colour is not right. Any fix available? I did a backup prior to the new installs.

Installed Yosemite and iPhoto 9.6. A lot of my photos are now too dark and the colour is way off from the originals. Any suggestions to correct this mess. I did a backup prior to installing Yosemite and iPhoto 9.6.

Check the monitor settings in the System/Displays/Color preference pane. You may have to change the color profile used or calibrate the monitor.
Also check the System/Accessibility preference pane to see if the Increase contrast checkbox is checked. If it is check it and see if there's any improvement.

Why are the photos i print much darker than the monitor image?

why are the photos i print much darker than the monitor image?

Please read this post then provide some details. What printer model? What operating system? What program are you printing from?
Some programs such as Photoshop give the option to print to CMYK or sRGB color spaces. Even though the printer uses CMYK inks the driver is expecting sRGB data. If CMYK is selected the prints will be much too dark.
Another thing to check is the media type. If you are printing on plain paper and have seelcted Photo paper the prints have too much ink.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Selecting Photo's for Photo Lab printing

I have a number of photo's that my family would like to take to the photo lab for professional printing.
I'm just wondering if anyone has any suggestions of the best way this could be done in iPhoto (order prints is not supported in Australia).
I was thinking the best way is to have the family browse the album, when they came across a photo they liked they could rate it, then create a smart folder to find all the photos with that specific rating. Then, I could export the selection to DVD. Anyone got any better tips?

Eddie,
If you don't already have a photo lab that you regularly use - you might want to take a handful of sample photos to several labs and then compare the results. That way you can entrust your family photos to the BEST lab.
Some labs produce better prints than others. Some do their own 'post processing' (even if you tell them not to) that can affect the outcome of your prints. It's better to spend a few $$ geting samples printed at several labs, then to print your stack of family photos and get unsatisfactory results!
If you are talking about burning to a DVD and not a CD, then I'm assuming you have a HUGE amount of prints to make!
Steve

Why do my photos come out too dark when I print them?

Bonjour from France,
I am trying to print photos but they come out too dark. We have just bought a new mac mini, and are trying to learn how to use it. We are using a Canon printer. Any help would be appreciated.
thank you,
maorisun

What colour profile are the Photos? What is the Printer set to use?
Regards
TD

Photos from Lightroom print too dark

I have saved my photos in RAW format and imported them into Lightroom. I have then made changes to them and exported them from Lightroom as JPEG files. However, when I go to a printing kiosk and get the photos printed, they are all darker than what they displayed in Lightroom. What do I need to do to be able to print accepable photos?

It really isn't that difficult to print and get good results. But the key is to make sure the monitor is set properly. Those who are really into printing strongly advocate using a hardware monitor calibration device. I agree, but haven't invested in one. Over the years I have worked with the controls on my monitor and software tools to match the monitor to my printer. And having done so I have found that images that I send to a lab match very well, too.
Since you have never printed before, or are just getting started, you really need to take time to get that monitor adjusted to match the results you are getting. Photolabs are pretty consistent. And if your images are too dark you must at the very least reduce the brightness of your monitor. Color matching can be a whole additional challenge. If you want to print, whether on your own printer or through a lab, getting your monitor set up properly is critical.

Photos print too dark on Lasejet CP1515n

I have a Laserjet CP1515n and in almost every way it works very well and very reliably. Unfortunately color photographs always print out too dark. I have not been able to find any documentation that describes how to resolve this and set up color printing for more accurate results. I have never had this problem with any HP inkjet printers, of which I have owned a number over time. This is presumably a calibration issue but I would appreciate any pointers on how to deal with this problem. Printing of documents in color is not an issue, only photographs.
I have seen other people with other color lasers with this type of problem. I don't believe that what they have said about how to deal with this amounts to any more than experimenting with settings. Does anyone have an approved or official take on this problem or a reliable method to solve this?

You can change how the printer interprets color.
Go to Print->Properties->Color->Color Thems and select "Photo".
This helps give more accurate color when you are printing only photo images.
I work for HP.

Photos suddenly way too dark?

Okay, here's the info:
-Just updated to Mavericks (works fine)
-Updated iPhoto
-When I launch iPhoto on my MacBook, all my photos look fine
-When I connect my external monitor, the photos look too dark.
-I've confirmed that the Color Profile for the monitor is properly calibrated--it's JUST iPhoto
-When I scroll between photos, they momentarily look exactly like they ought to look; but once they've fully loaded, they suddenly become extremely dark again
Any ideas?

No--you evidently didn't understand what I said. As I indicated, EVERYTHING ELSE looks fine on the external monitor. On websites, in other photo apps, in Preview--everything looks exactly the same whether on my internal or external monitor.
It's ONLY in iPhoto that things look messed up. The photos, as they're loading, look correct; as soon as they've fully loaded up, they suddenly become so dark as to be difficult to see--everything else on the screen remains looking exactly the same. And if I drag the window from my external monitor to my internal monitor, the pictures suddenly look okay again.
But, if I view a photo in Preview, it looks the same on both monitors, even as I drag it between the two. So, again, it's ONLY iPhoto.
Incidentally, this is a new problem--as far as I can tell, it only started after installing Mavericks.

Photo taking is too dark!

Bought my Mac last week and now when I use Photo Booth it's too dark! What's going on and how do I get this fixed?

NOKIA could have put the camera in N73 on the E52. I loved the photos on my N73...
500.21.009
02-06-2010
RM-346
Nokia E71-1 (27)

Prints too dark in elements, ok in easy photo print

Hi,
I have been treading around trying to find an answer to my question.
I´m using Epson PX720WD and Photoshop elements 10.
When I´m printing with the correct paper settings "premium glossy photo" in elements, my prints gets too dark. If I print them on normal paper and choose "plain paper" they seem better. And they are "perfect" if I print them in easy photo print - Epsons software.
I read that I have to calibrate my screen and all, but I edit my pictures in elements, save them and open in easy photo print they are ok. There must be a way around, that I don´t have to calibrate my screen.
Thank you in advance for answers.
Btw, I´m completly new to this, so please don´t use too complicated words:)
Brgds,
Cecilie

I found something that helped, I let the printer control the colors, and the pictures turned out like I wanted them.
I found help in this document:
http://files.support.epson.com/pdf/r2880_/r2880_mc.pdf

Exported Jpeg's when sent to photo lab print too dark

Similar Messages

Maybe you are looking for