Exported movie not same using SmoothCam.

I do aerial videography and have a problem I have read about in the Forums but can't find an answer.
Did some footage - used SmoothCam Filter - exported movie - movie looks worse than original footage.
Footage is smooth viewing in FCP but any exported movie is worse than original.
Exported an unaltered movie, imported same in FCP, then used SmoothCam with no differenct.
Looks good in FCP but any movie is terrible.
Some help would be really appreciated because I would love to put this short clip up so a customer can view it.

Jerry,
You would be surprised with the positive results I have gotten from SmoothCam on aerial ( moving ) footage.
Looks like a WesCam.
In the past, once the final product is finalized I burn a master DVD and the video in the DVD is just as smooth.
Only when I Export to a .mov do I see the movie as if the SmoothCam was not used at all.

Similar Messages

Imovie 11 Can't Export Movies NOT ENOUGH ROOM IN THE HEAP ZONE!

I have plenty of space on my hard drive, no other programs are running, and the video being exported is only 6 minutes and 57 seconds long.
I am working on a short film and 90% of the time that I try and export it in 720 I get an error, because there is not enough room in the heap zone. Then after I restart the computer if I am lucky I can get it to export 1 out of 10 trys. It has nothing to do with the title I give the video.
I need the video exported in 1080, but it gives me the same error EVERY TIME! Even when I export to quicktime and use various settings I keep getting the same heap zone error. What is the deal!?! I have exported an hour long documentary and didn't have this problem. I erased all my previous projects and events and still I get this error
UNABLE TO EXPORT MOVIE
The movie could not be exported because an error occurred. (Not enough room in the heap zone /)
HELP PLEASE!!!!!!!

I have the same problem when trying to export a 720P movie to iTunes. Reboot did not help nor did renaming the project. I have an older MacPro with dual 3.0s, 11 Gb Ram and slightly less than 1Tb free space on the boot drive. This is a software issue, not a hardware problem. Apple please fix the myriad of problems with iMovie 11. My productivity has ground to a halt with my 4 month old iLife Software. How did this software ever pass muster!!!!! I can't believe anyone would purchase the new version of Final Cut given the horrible product you've included with the last iLife Set. This is an example of why I left the Microsoft Windows community. SHAME ON YOU!!!!!! I usually create 4 to 5 movies a month for the flying community I live in. I have completed one since January, and it was a mess due to software glitches. My attempt to re-render an old iMovie 9 creation has been met with failure. I have projects backing up and really have no desire to finish them or create others as iMovie 11 is no longer fun since it is broken. I'm tired of iPhoto 11 and iMovie crashing or not working and the reason for spending more on an Apple product no longer exists. Outdated expensive hardware and buggy software. Time to sell my APPL stock like Bob Mansfield, You're ignoring your core supporters and are living off the hype of the iPhone/iPad. The poor economy has allowed your "halo effect" to endure many recent short-comings - (Mobile Me (how slow and expensive can it be to stream a personal home movie - but don't worry you don't need Blu-Ray)), Mail (why do I keep getting duplicate emails in my drafts folder? and why is it always losing my password - just like Mail on my iPhone), Never providing a stable video card for 2006 Mac Pros, Crippled iPhone 4 for Verizon, no iPad Flash support, iLife Crapware)............where's the Tylenol!!!!! I need it since I promised an iMovie project for a friend's memorial that I am now unable to deliver.

How to export movie in same format/resolution/etc as original footage?

I recorded a bunch of clips in beautiful HD on my iPhone 4 today. I then edited them together in iMovie HD. To my surprise, when I exported the movie, the video was only 640x480.
I have a simple question. How do I export a movie with the same resolution as the video that went into it?

What kind of project did you create in iMovie?
What kind of export settings did you use?

Will Motion 5 export movies I can use in Keynote presentations? thank you

I've used previous standalone version of Motion (quite a while ago). Can Motion 5 also export .mov files I can import into Keynote presentation?

If Keynote can import a Quicktime file like h.264 then yes.
TOnyTOny

Exported movie not playing properly

I have exported a sequence from FCE "as a Quicktime Movie" and put it onto a DVD using iDVD. However, when I try to play the DVD in my DVD player connected to my t.v., it plays, but not properly. It pauses every few seconds, as if the disk or the player were dirty.

Hi
1 - 16 makes iDVD 6 to try x16 = Lot's of burn errors
I only use QuickTime movie - NO Selfcontained, No QT-conversion
I NEVER put .avi or .wmv or anything else than streamingDV (QT.mov) into iDVD
I use QuickTime version 7.4.5
*iDVD Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides:
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!! I deleted every iDVD application and folder from my boot drive, emptied the trash and then installed iDVD 08 using the customize option and I am up and running.
Yours Bengt W

Why are my exported movies not complete?

When I try to export a movie from FCP HD (and now 5) as a Windows Media file, it only creates a new movie out of the first 20 seconds of the movie. The original is only 38 seconds long. The same thing happens as an AVI or trying to do this from Quicktime Pro.
I can only export the whole thing as a Quicktime but can't get it small enough to email it.
Compressor did the same thing.
Help!
G4 dual 1GHz Mac OS X (10.4.8) Final Cut Pro Studio

You might have some sort of a trial version of Flip4Mac on your computer... I seem to remember that the old demo only let you export 20 seconds...
But my memory is fading in later years.
What are you using to export to wmf - Quicktime alone won't do it...
CaptM

Exporting movies in iPhoto using 'Current' Setting, exports the first frame only

Hi,
When I export my iPhoto library into separate events using the 'Current' Setting, it exports all video / movie files as the original file type with a single frame in it.
I don't want to go through each event and drag and drop each video to the exported folder as that would be an enormous pain. Does anyone have ideas to fix this? I have edited some photos, so I don't want to export as 'original' if possible
Thanks!
iPhoto has the latest updates installed and the original videos play perfectly in iPhoto.

Yeah, I have upgraded from previous iPhoto versions, some videos are a few years old (.MOV iPhone format) and some are only a few months old (Canon EOS .MOV format), both export only first frame. I might have to recreate my iPhoto library and start fresh! Currently I am exporting as 'Original' and 'Current' to two different folders, and just grabbing the videos from the original and replacing the videos in the 'Current' folder.
LarryHN's solution works well, but when I add a second condition to select a specific event, I can't choose from a list of specific events (unlike albums). Entering in the event title (in the Event condition) sometimes adds videos from silmilar titled events.

Exported movie not showing correctly in MS Explorer

I posted a .MOV file on my web site. It shows fine in a Mozilla browser but in a MS Explorer window it just shows a small piece of the video. The sound works fine.
Any suggestions?
Christer

What format did you export the video? Are you trying to view it from Windows in IE, or from the Mac version of IE?
If you exported the file in H.264 and are attempting to view it from Windows, you must make sure that you have the latest and greatest QuickTime installed.
On the Macintosh, you will want to make sure you have the latest (last!) version of IE, and also update your QuickTime to the latest version.

Export is not for backup..... but...

Hi everyone!
Just curious to hear different opinions about the subject. I'm seeing a lot of posts that some are using export as a means of backup and as expected, there will always be a reply that export should not be used as a means of backup and that RMAN should be used.
so imagine a scenario where a database has like 5 schemas and that each of those schemas are actually used by 5 different applications. now one user accidentally truncated a table in his own schema and wanted to recover, that means backup has to be restored and recovered up to the point before the "accidental deletion". but a lot of things can be going on for the other schemas at that point too. plus what if the database is quite big which means restoring will actually cause longer downtime.
would it be more practical to just import the dump of that schema alone rather than affecting the other schemas?
again, just wanted to hear your thoughts...
*dont get me wrong, im using RMAN :-)

Chopstix wrote:
Hi everyone!
Just curious to hear different opinions about the subject. I'm seeing a lot of posts that some are using export as a means of backup and as expected, there will always be a reply that export should not be used as a means of backup and that RMAN should be used.Data Pump is very limited logical backup tool and have a big difference with RMAN. RMAN is powerful tool that was designed only for backing up and recovering the database
so imagine a scenario where a database has like 5 schemas and that each of those schemas are actually used by 5 different applications. now one user accidentally truncated a table in his own schema and wanted to recover, that means backup has to be restored and recovered up to the point before the "accidental deletion". but a lot of things can be going on for the other schemas at that point too. plus what if the database is quite big which means restoring will actually cause longer downtime.If you Drop a table, a data (not truncate) you can still get it using Flashback feature. But if you truncate the table, you can perform point in time recovery not in the same server, but in the different server , get the table back and copy it to the production
Moreover, if you have Standby database and you haven't shipped the archived redo log file that contains "TRUNCATE" command, you can still get the table back buy opening the Standby database in read only mode and copy the table back to the production database
would it be more practical to just import the dump of that schema alone rather than affecting the other schemas? Imagine you have a database with some TB size and you take dailiy logical backup of all schemas ... Furthemore, you'll not get the latest data back, but take the table to the time when it was exported by missing some data
again, just wanted to hear your thoughts...
*dont get me wrong, im using RMAN :-)Keep using RMAN and use Data Pump to move data from one database to another :)
Good Luck!
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

Android Movie Studio no sound on exported movie

Does anyone else have this issue or have a solution?

Not sure what you mean by exported movie. I use WinX DVD Ripper to convert my DVDs to MP4s to play on IdeaPad. I have to set audio to two channels and it works great.

Exported movie is not the movie I see in FCP

Hi there,
In a Project which was created by another cutter, I export a .Mov from FCP.
The exported movie has the same edits but some of the content is displaced/shifted.
I tried a lot of things to solve the problem.
I checked if the imported footage was some kind of strange
I threw away all the render files of the Project
I opened the original captured footage and saved another .Mov
and (re)connected it
I used FCP-Rescue
none of that worked out for me.
In this Project, the cutter made a lot of speed changes to the clips.
Could this be any hint?
Or could it be anything with the tape?
And:
When I opened the project first I had to Lip sync some parts of the edit.
But as I said everything looks fine, when I watch it in FCP.
Any Ideas?
Cheers,
Shahin

In my experience, this has only happened when media has been moved from its original location.
Provided you're not working with a long sequence, my advice is to match back your edits and splice the in again. This will assure a mirror export of your sequence.
Good luck,
Mario

Quicktime pro will not export movies

Last year, after I updated to qt 7.X I and bought the pro key, it would no longer export movies correctly. It was a common problem and the fix was to uninstall it and reainstall 6.X. Since then it has been updated several times and is required for itunes. So, I finally reupdated to 7.X (7.2 as of this morning) and what a surprise, qt 7 still does not export movies correctly. It takes hours to export and then fails. Just like when qt7 first came out. Now, I cant even find the link to uninstall the crap and reinstall 6.X

Ok, let me see if I can clarify some. What I want is for the quicktime pro 7 that I payed for to work. I do not want to have to uninstall it and go back to qt6 (which I already know works properly because I had to resort to reinstalling it once before). Yes, I was irritated that I could not find the link to revert to qk6 as a last resort. But, I would rather not take that last resort. I would like the product I bought to operate correctly. Especially since itunes and other apps will no longer work with qk6. QT7 has been update around half a dozen times since it was released and still does not operate correctly. And I certainly don't want the hassle of reinstalling the entire operating system.
The two problems I am having with qt7 are... (1)It takes hours to export the same files that qt6 used to export in minutes. (2)With qt7, when I export an mp4 video, only quicktime on Macs will play the video. Any other player, even quicktime on windows, can only play the audio. Wmp does not play it at all. This did not happen with qt6. Any player could see the entire movie with no issues. Now, I can avoid the second problem by exporting it as a quicktime movie instead of an mp4, but it is nowhere near as efficient as an mp4. The file sizes with a qt movie are much bigger, yet the quality is much lower. I don't believe I changed any settings that could have caused the mp4s to suddenly stop working correctly on other players.
And i'm currently at work on another computer, so if teh problem doesnt sound familiar to anybody and I cant be helped without knowing the codecs i'm using, I guess i'll have to wait until I get home to look that up. But if you can suggest codecs in the meantime that maybe I have not tried, I could try those while I wait to see if the codecs I am using are wrong.
Message was edited by: must have music

HT3819 How do I share just one movie (not my entire library) from my itunes library with an authorized computer using home sharing?

How do I share just one movie (not my entire library) from my itunes library with an authorized computer using home sharing?

many thanks.
That should be possible.
From his library connect to your library via Home Sharing.
Select the name of the shared library in the source pane of your itunes, and click on the wee disclosure triangle to the left of the name of the library. Does "Films" appear beneath the name of the library?
Here's a screenshot of what I mean.
Select "Films". In the right-hand pane you should see the item you want to transfer. Just select that item, and click "Import".
Use the same basic technique to get one or a few songs from your library transferred to his library. (The only difference is that you would have "Music" selected instead of "Films".
If you don't want him to have access to other items in your library, you could just switch Home Sharing off on his library after you've done the transfers.

How can I set firefox to stack my tabs one after the other so that I do not have to move through tabs using the buttons at the ends

when I open multiple tabs which do not fit the tab strip I have to move through tabs using scroll buttons. is there any way way I can stack the tabs on each other or suggest me a add-on which can help me achieve this

You can consider to access the tabs via the list all tabs button.
You see the "List All Tabs" button in current Firefox versions if there are that many tabs open that you get the Tab bar scroll buttons appearing.
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/
The Custom Tab Width extension adds CSS rules to adjust the tab width settings as set by the browser.tabs.tabMinWidth and browser.tabs.tabMaxWidth prefs on the <b>about:config</b> page.
* Custom Tab Width: https://addons.mozilla.org/firefox/addon/custom-tab-width/
You can achieve the same with code in userChrome.css.
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#tabbrowser-tabs ~ #alltabs-button { visibility:visible!important; }
.tabbrowser-tab[fadein]:not([pinned]) { min-width: 100px !important; max-width: 250px !important; }
</nowiki></pre>

Help: White Box "movie not loaded" in banner ad using AC_RunActiveContent.js

I am having trouble with a banner ad displaying all white when I try to insert the code into my website.
I get a white box and when you right click it says "movie not loaded"
I am using the AC_RunActiveContent.js file
Here is the HTML code.
Any help is greatly appreciated.
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>728x90</title>
<script language="javascript">AC_FL_RunContent = 0;</script>
<script src="http://www.dewalt.com/dwassets/other/flash/mundial/AC_RunActiveContent.js" language="javascript"></script>
</head>
<body bgcolor="#ffffff">



<script language="javascript">
    if (AC_FL_RunContent == 0) {
        alert("This page requires AC_RunActiveContent.js.");
    } else {
        AC_FL_RunContent(
            'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0',
            'width', '728',
            'height', '90',
            'src', '728x90',
            'quality', 'high',
            'pluginspage', 'http://www.macromedia.com/go/getflashplayer',
            'align', 'middle',
            'play', 'true',
            'loop', 'true',
            'scale', 'showall',
            'wmode', 'window',
            'devicefont', 'false',
            'id', '728x90',
            'bgcolor', '#ffffff',
            'name', '728x90',
            'menu', 'true',
            'allowFullScreen', 'false',
            'allowScriptAccess','sameDomain',
            'movie', '728x90',
            'salign', ''
            ); //end AC code
</script>
<noscript>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" width="728" height="90" id="728x90" align="middle">
    <param name="allowScriptAccess" value="sameDomain" />
    <param name="allowFullScreen" value="false" />
    <param name="movie" value="http://www.dewalt.com/dwassets/other/flash/mundial/728x90.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#ffffff" />    <embed src="http://www.dewalt.com/dwassets/other/flash/mundial/728x90.swf" quality="high" bgcolor="#ffffff" width="728" height="90" name="728x90" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
    </object>
</noscript>
</body>
</html>

Both of the files (js and swf) appear to exist where your code has them. Does the html page live in the same folder as the swf?

Exported movie not same using SmoothCam.

Similar Messages

Maybe you are looking for