Exported PNG area isn't same as artboard

I've created an artboard at a certain size. I put some objects within the artboard. But the exported PNG is not the size of the artboard, but is only the size of the graphics on the artboard.
As designed? Seems wrong.

Sandee,
You can have multiple Artboards in any file. Here's one that I did and exported each Artboard as a PNG. You can choose a single artboard, a range or all to be exported.
Also if you use Save for Web&Devices make sure to uncheck this box which will clip the export to the smallest enclosing rectangle.

Similar Messages

Export PNG's at the same size I have cropped them

Hi, I am exporting frames as PNG's, is there a way to export them at the same size as I have cropped the actual video, when I export them they are then exported at the same size as the actual video and not at the crop size I have set?
I really need them to be exported at the crop size I have set in Premiere Pro, thanks.

Ah I see, so if I create a new sequence and set the size it will then export at that size?
I did try resizing using paintshop (all I have atm) but it was losing too much quality.
Also would it be worth investing in photoshop for resizing, does that resize with better quality?

Batch export PNGs from PSDs into same root folder?

I am trying to export a large amount of PSD files to PNG's (png-24 for web and devices) and want to run a batch while still respecting the file/folder organization in place. Is it possible to run a batch action or script to export the PNG's into the original root folder rather than choose a destination for each folder I want to export?
For example, I have several PSDs in folders A, B & C.
So far, I have been running an action including Export, choosing A as the destination for the A psd's, then doing the same for B and C separately.
Is it possible to run one batch on A, B & C at the same time and keep the resulting PNG's in the original PSD's root folder respectively in CS5? I am pretty familiar with working in Actions in Photoshop, but don't know much about additional scripting in or out of the program.
Thanks!

Download the CS5 version of Image Process Pro from http://www.russellbrown.com/scripts.html
It has a option to maintain the folder structure.

RH11: Word export: Subchapters are generated with same heading as chapter above

Dear community,
when I export my RH project to word, RH generates for each chapter (that has any subchapters) an additional subchapter with the same heading as the chapter above. In the project as in the chm export, the chapter does have content (as I want). But not in the word export.Here the chapter is empty,its content is put into that new subchapter. Got me?
You can see what is happening in the export dialog.
So whats happening there, what do I wrong?
Thanks for your support!

Sorry, you did post an image.
It looks like you have created a book with the same name as the first topic. In the document you should see a book called Ubersicht followed by a topic called Ubersicht.
The document is following the structure you have defined. I think what you are wanting is that Ubersicht is not indented one level as shown. Use the Left arrow above.
I also suspect you have the book in the online help set up to open the topic. Experiment with that unlinked.
This is all covered in the pages on my site. It does take a little trial and error to get it working as you want but it will become obvious.
Hope that solves it for you.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to export all Artboards for different mobile resolutions? e.g. My artboards are 1080 x 1920 px, I want them all to 216 x 384px... ( I m using export .png by adjust ppi, but cannot set less than 72ppi)

e.g. My artboards are 1080 x 1920 px, I want them all to 216 x 384px...
( I am using export .png by adjust ppi, but cannot set less than 72ppi)

Sorry to hear that. There is an enhanced version on Adobe Exchange that may be more "bug free".
https://creative.adobe.com/addons/products/2955#.VNQ6Asbdkqg
You might want to test is on a smaller file and see if it will export the PNGs at the proper resolution. My quick test showed that it did.
You can delete the "Layer" export and get JUST the Artboards by choosing "Export Layers>None". You may have already tried that.
You might also break your file into 2 or more files and see if it works with fewer artboards.
I have had good success with the free version. Perhaps the paid version will solve the issue.

Export PNG in CMYK vs. RGB. Changing colors.

Short version: Using Illustrator CC. I correctly exported a PNG logo in RGB (sent to client), but the new PNG logo looks much different than the old PNG logo that was exported incorrectly in CMYK (sent to client long ago).
Client wants to know why the NEW PNG logo looks so different than the EPS logo and the OLD PNG logo (all starting with the same Pantone color).
Longer version:
I recently sent logos to my client in different formats.
ai, eps, eps CMYK, pdf, and png
Prior to creating the PNG version in Illustrator CC,
I changed Illustrator's color mode to RGB, then converted my Pantone colors to RGB (specific values per the Pantone book), then exported as PNG.
This created a much different blue than the CMYK eps version.
Someone else on the client side is working with my files and questioning why the blues look so different. The Pantone eps vs. the RGB version.
Problem:
In the past, the PNGs had been created incorrectly--They had been exported in CMYK mode without converting anything to RGB and they matched much closer to the EPS version.
Now they are asking why there is such a big difference.
I did the process correctly, I'm not sure how to answer this. Why do they look so different?

So if I just leave the Document Color Mode as CMYK, leaving with the logo set in it's specific Pantone colors, and then Export/PNG, that will covert my CMYK colors to RGB for me. Seems almost too easy. Just go File/Export/PNG, but okay.
And while that may give me a better perceptual match, here's the other side of the issue.
They've given me and their web company specific RGB values for their logo. These are based on the Pantone book, and likely different than the conversion Illustrator will do.
The idea being, they want the website and logo to be the exact same blue. And they are based on the values they gave, but they look different than the original Pantone. Brighter and more vibrant. I'm dealing with another member of the client team, trying to use Illustrator on her end for smaller tasks, and she wants to know why the rgb PNG logo (which I entered in manual values for based on the Pantone book), is so different than the Pantone eps file. In the past, when I just exported as a straight PNG without tinkering, the perceptual match was there. Now it isn't. How can I explain this?

Pixel Preview doesn't match exported PNG

I use Illustrator CS4 for icon design, so Pixel Preview is a pretty important feature for me. Unfortunately, I just found out (the hard way) that Pixel Preview isn't accurate - it doesn't show you exactly what you'll get when you export a PNG via Save for Web and Devices.
Here's an example from my current project that shows the problem (enlarged 4x):
A screen snap from AI with Pixel Preview off:
A screen snap from AI with Pixel Preview on:
The exported PNG file:
Look at the center of the second image: See that dark gray line bleeding from the light gray circle into the black area? Now look at the third image: The line isn't there.
(Please don't fixate on this one example. Since I noticed the problem, I've found inconsistencies all over the place. This one was just the easiest to see.)
If I can't count on the absolute, pixel-for-pixel accuracy of Pixel Preview, then this feature becomes worse than useless in my work, because it actually misleads me into making small tweaks that make the final output look worse.
If anyone knows of a workaround (or a setting that turns on "accurate mode"), I'd love to hear about it.

I can't state this definitively, but the inconsistency seems to happen with gradient fills. (The light gray semicircle in the example in my original post has a gradient fill with a pretty abrupt transition from light to dark.) Maybe the issue is specific to gradients?

How to export edited 5D material into same Format

Hello ppl!
Just maybe someone can help me with this one...
I know it is more of Technical side of 5D, but my Q has something to do with it;
As we know, 5D shoots video, compresses it with H.264 codec and saves it in .MOV container!
For EDITING purposes I use ADOBE CS5 (strong working station with CUDA Mercury engine and everything)...
Anyhow, I was just shooting "Making Of" for some Feature film - and what I wanna do is CLEAR FOOTAGE MATERIALS of unnecessary parts - and then export it back to HDD and give it to Film production
But how do I get to export edited material in the same container and with same properties as originally shot footage was????
ADOBE has quite powerful MEDIA ENCODER, but you can't save h.264 file to have .MOV extension!!!
You can choose H.264, but then your file will have [b]*.mp4[/b] extension... -- Further on - will that file be of the same quality as the file I downloaded from my CF-card???
Any ideas about that - or maybe an advice for some other ENCODER???? ----- Just don't suggest MAC cause I can't afford it at the moment!!!!
What I can do is use AVID MEDIA COMPOSER 4 or 5 (also on my Windows workstation) - but since AVID recodes all footage as the first step when importing it, I am not sure it would fullfill my needs!!!!!
Hope someone will know how to handle it!!!!
Cheers!
V:

-You see, the problem is that my Premier, actually my Adobe Media Encoder can't export to any MOV file higher than Standard Def... Why is it so, I don't know, maybe cause my QT isn't PRO???? Do you think that going PRO would help this matter?
No, you don't need QT Pro for export (or import, for that matter). Are you selecting Preset or Video Codec in the Export Settings window? Like this:
Do you have these, or at least most of them?
-- you also mention ProRes and Proxy here as well, but I am stuck with PC - I wonder how are those AVID QT CODECS gonna work with PREMIERE - are they also gonna re-encode the entire material???
The Avid codecs work fine with Premiere on a PC--I use them frequently myself. But, yes--regardless of the codec you use to export these files, they will be transcoded/re-encoded. I just checked with an FCP buddy, and he said that his Canon T2i clips (similar/same format to the 5D) will import directly into FCP, so if that's what you're using on the Mac, you can forgo the transcoding. That said, transcoding to DNxHD (or ProRes) is not going to incur a visual quality hit, though the files will be larger.
- which Format (codec) are the final files gonna be???
H.264! They're the same as the originals, just trimmed to length.
- Thanx for that one! I hope it works on Windows as well, since Windows is my OS - and thnx for coupon code:))))
Well, you use this plug-in on the Mac; it enables you to read NTFS-formatted drives on the Mac. You'd just continue to do what you've always done, and the Mac user would need the plug-in. If you want to read HFS formatted drives on a PC, you can use Paragon HFS for Windows or MacDrive. Either of those will be good for HFS drives on a PC. Of course, you only need one of these drivers; either NTFS on Mac, or HFS on PC.
There was some mention of using Quick Time PRO as only solution here... Do you have any idea what is that all about??? What can be done - editing wise - with QT PRO??? Or is it just bringing up some more Codecs into the game????
I prefer MPEG Streamclip; it does all the editing (well, the editing you need) that QT Pro does, and it doesn't cost anything. I recommend checking that out first before sending Steve Jobs any money

How can I export several versions at the same time?

Greetings -
I'm looking for something that I may just be missing, and hoping someone here can point me in the right direction.
Basically, I'd like to be able to select an image in my library and export several versions at the same time. For example, I select a photo and export JPG, TIFF and PSD versions in one shot without having to run three separate export requests - essentially a batch action. I can't imagine that this isn't built in already - I'm just assuming that I'm missing something obvious.
Thanks in advance for any advice anyone might have.
John.

Fwiw, I've not seen this requested before.
This kind of Export option is very typical, Kirby, when the rendering of the exported version will take a long time, for example for video or audio. Then you can share several formats at once, to render a version suitable for the web, for viewing on the computer, or the iPhone at the same time. That is really useful, if you render a movie at a full HD resolution and don't have to do it again for an iPhone/iPod version.
QuickTime 7 does this for the "File > Export for Web" option, for example. You can get three versions of your final movie at the same time.
And I just checked, the new iMovie Theater does this as well, when sharing a movie to the Theater:
When you add a movie, trailer, or clip to the Theater, iMovie creates versions of your movie tailored for local playback, playback on an iOS device, and streaming.
Come to think about it - exporting a webpage from Aperture will also export thumbnail sized images plus a larger version for downloading.

Can I export multiple folders at the same time, keeping the album structure

I'm exporting all of my photos from 2010 so far. Is there a way to export multiple folders at the same time, while keeping the existing album structure? It seems that when I try it, iPhoto exports them all to the same folder.
I really don't want to do this one album at a time, and here's why -
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.

Check out [iPhotoToDisk|http://www.iphototodisk.com/index.html]
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.
Why not upload to Walmart from iPhoto? Check out the first option here:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

HT4356 Do I need an App to print from my iPad to my new HP AirPrint capable printer? My iPad says it can't find a printer and we are on the same network.

I have a new HP LaserJet M1217nfw MFP that is supposed to have air print. My iPad isn't reading it. Is there something special I need to do? Both are on the same network and my laptop is working fine with it. Any suggestions?

1. Make sure it's setup for network printing
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
2. You can try using this App
http://i1224.photobucket.com/albums/ee374/Diavonex/6df9f88d.jpg
3. Reboot router, printer and iPad if necessary

Export to PDF and print same swatch colour - different variation of colour on printouts

I have multiple documents - they are all set up the same way.
I have 2 or 3 swatches in each of them -namely Rubine Red is giving me an issue - this is the same swatch in every document!
===============
The Swatch
===========
Colour Settings
Here are my Colour Settings - the exact same in every document - I have also used the "Convert Profiles" and made sure all are the exact same.
=================
Export to PDF
When I export to PDF - the export looks great - and the coloured frames all look the exact same - and they give the exact same colour read outs in any profile I look at in the Preflight Manager
The CMYK Reading is 4/99/20/0 in all boxes
====================
The printed result
==================
Same colour settings
Same swatch and same swatch values
Same PDF export options
Same swatch values on output
Only 1 file prints the correct colour throughout
====================
PDF export settings
Test File
Can anyone help me with this?
The printer I am using is a XeroxColorQube using PS driver.
Windows 7
Adobe InDesign CS5.5
Fully updated

I've also exported the document to IDML - and I've unzipped that folder. I've read the information for the colour - there's only 1 reference to Rubine Red and that's giving the same percentages as the InDesign file.
I don't know where the 2nd shade of pink is coming from.
But I suspect that it's from the print driver itself.
Also - just occured to me, I lost my PDF settings a while ago, InDesign crashed and the PDF defaults were missing - I dowloaded a copy of a set from someone on these forums through a google search.
But I no longer have PDF x4 export option - where can I retrieve these.
How can I restore the original PDF settings for InDesign?

Export PNG images with alpha channel from flash

Hi,
I have this FLA with animation and when played, the animation has alpha channel. I can’t understand why when I look in the library I see the frames without the alpha channel and also when I try to export/extract the image again the image don’t have alpha channel.
How is it that in flash this image has alpha channel and how to get it out like that into PNG?
Here is the link to download the FLA:
http://download759.mediafire.com/nb749r29220g/e0636ab0ru6ouoa/Untitled-1.fla

"when played, the animation has alpha channel"
how are you playing the animation? control/enter in Flash, Publishing to a Web page or what?
How can you tell that the animation has the alpha channel? What exactly are you seeing?
What is the aniimation? a series of images, one image moving? Are teweens imvolved?
" when I try to export/extract the image again the image don’t have alpha channel"
How are you exporting the image? is it a single image? or a series of frames that makes up an animation?
What was the file format of the original image? you brought that image into Flash and animated it? Now you want to export as a .png with transparency?
Have you ever tried to export a simple .png before so that you see and understand the dialog box that pops up during export? are you chosing "24 bit with alpha channel" in the "Colors" choice?
For those of us who may not want to download your file, please provide a more detailed describtion of everything related to this question.
Best wishes,
Adninjastrator

I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
You're not doing anything wrong - it just isn't a feature of iOS devices.
What were you hoping a Bluetooth connection would allow you to do?

Issues with processing messages on one receive port causes problems on all the receive ports that are on the same handler

Greetings,
An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
Thanks in advance.

What do you mean exactly with this question?
"Can you provide some more detail like BizTalk the receiver? "
The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
port) that can't process its messages. Or rather by one receiving software that can't process its messages.

Exported PNG area isn't same as artboard

Similar Messages

Maybe you are looking for