Exported projector.exe file - sound turning off after a while

I have exported a flash clip as an exe flash presentation file. I am using Windows 7 with flash player 10.
The flash clip contains 4 seperate video files (movie trailers) which have been imported into flash. I am able to play these fine by running the exe file created in Flash (CS4).
After a while (10 min or much longer somethimes) the audio goes off but the flash movie still plays without the audio.
Any ideas what could be wrong?
I have also improved the quality of the video files that I am using within the flash movie (downloaded them as HD video files and converted them to f4v files in Adobe Media Encoder and imported them into flash to play with flv component. Unfortunately when I try to play the published exe file, when it comes to play the imported video elements the audio plays fine but the images of the movie are jittery. Am i doing something wrong?
Thanks in advance

Hi, not sure if you are in the correct forum. You may have more help in the Flash forum.
I don't understand CS4 and how Flash Player is related, so can't respond to that. Perhaps someone else will.
You could look on the right hand side for "more like this" when you open your thread since those threads are related to
issues similar.
Thanks,
eidnolb

Similar Messages

VOX: Sound turn off after 60-90 seconds

After 60 - 90 seconds, sound turn off, video is ok. Pls help me. I am woking on Notebook HP ze5470us. I've tried changing many things but always is the same.

Quote
Originally posted by nbw
I'm having the same problem and I'm pretty sure it's the driver. I downloaded the latest driver and MSIPVS version from the MSI support site at http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=536
They're dated 2004-5-4, which I assume means May 4. There is no change in the sound problem. I have a Creative SoundBlaster Live Value card with line in jack. The sound is fine for the first 60-90 seconds of either live view or recording, then it snaps off and stays off. It's the same whether I'm using MSI PVS or WinDVD Creator as the capture software, so I'm pretty sure it's the driver.
However, I'm not sure how to make sure the new driver was the one which WinXP Home installed. Before running the setup.exe that came with the new driver, I ran Add/Remove Programs from the Control Panel and removed the USB Audio/Video Device Driver item that represents this device driver. After rebooting, I ran the setup for the new driver I just downloaded. After rebooting again with the MSI VOX2.0 card unplugged, I plugged it in and Windows "found new hardware" and offered to search for a driver for it. I allowed that to go forward and got a warning from Windows that the driver was not signed or approved. I allowed it to install anyway, but there is still the same problem. I don't know how to verify that the new driver was the one picked and installed by Windows, or if it could be still the original one that was on the install CD supplied with the MSI VOX2.0.
I noticed that a no-audio problem was mentioned as fixed in the ReleaseNote.txt file included in the msipvs_8609.zip file, but I'm not sure they're talking about the same no sound after the first minute problem.
I can't find anything else about this anywhere.
Anybody solve this problem yet or have an idea where to find help?
Yes I think I found the problem. It seems that only laptop users have this problem. I also had this problem with the vox connected on my laptop. Sound simply switches off after about 30 seconds. Reading the forum I found out that the problem only appears with laptop users. I tried it on my desktop pc and the problem disappeared.
The problem can be solved by disconnecting all other usb devices that draw current from the usb port. I did this and since then the vox is working correctly for hours now. It is a pitty that we are not helped by MSI. I would expect that they know how much current the vox draws and that it is critical.

Mac sound turns off after 30 mins

have to restart my mac every time just to have the sound turn off again in 30 min

i have sound but i hear nothing.
and im not deaf

Personal File Sharing Turns off after an attempt to connect from other comp

I have personal file sharing turned on on my MacBook and when I attempt to connect to it from my iMac I get a typical logon windows and extended delay and then the message that the Server Connection was Interrupted. When I check Personal File Sharing on the MacBook it has been turned off even though I have locked the settings.
The problem exist whether I use my local Wireless LAN (Apple-N) or an ethernet connection. In both cases the MacBook the ethernet connection is with the a port on the Apple N wireless LAN

It may be solved for you, but I just discovered that since upgrading to 10.4.11 I can no longer connect to any of my other Macs. When I click on network NOTHING shows up in the Finder.
While I'm happy to grab random code posted by an unknown person and stick it in my system, I shouldn't have to. Clearly Whatever the update did to your Mac it did to my MacBook as well and most likely others. If this is the official fix for the problem, Apple needs to acknowledge it and offer a link to the file rather than relying on fix-it forums to solve their problems.
Apple seriously needs to test these updates a little more thoroughly before they make them available. I KNOW you are supposed to back everything up before you do it, yada, yada, yada ... but Apple has basically made the Software update feature an automatic function as if it is the best thing for your computer ... clearly that is not always the case.

Flash Player - sound going off after a while

I have exported a flash clip as an exe flash presentation file. I am using Windows 7 with flash player 10.
The flash clip contains 4 seperate video files (movie trailers) which have been imported into flash. I am able to play these fine by running the exe file created in Flash (CS4).
After a while (10 min or much longer somethimes) the audi goes off but the flash movie still plays without the audio.
Any ideas what could be wrong?
I have also improved the quality of the video files that I am using within the flash movie (downloaded them as HD video files and converted them to f4v files in Adobe Media Encoder and imported them into flash to play with flv component. Unfortunately when I try to play the published exe file, when it comes to play the imported video elements the audio plays fine but the images of the movie are jittery. Am i doing something wrong?
Thanks in advance

Hi, not sure if you are in the correct forum. You may have more help in the Flash forum.
I don't understand CS4 and how Flash Player is related, so can't respond to that. Perhaps someone else will.
You could look on the right hand side for "more like this" when you open your thread since those threads are related to
issues similar.
Thanks,
eidnolb

IPhone 4s turns off after a while when I turn on 3G/wifi

Hi,
Recently I have been facing a serious problem with my iPhone 4s. The battery is draining quickly, I mean very quickly, especially when I am using wifi or 3G. 3G to be more specific.
I have been charging my iPhone 4s at work on the computer USB cable. I don't know if this damages the battery, I believe it has already happened or maybe it messes up the battery life and percentage.
Sometime when I am talking on the phone and I have like 47% it shuts down, whenever I turn on my 3G after a couple of minutes even when i have 70% it shuts down then I wait a couple of minutes and I will be able to turn it back on, it works for a like 1-2 minutes then it shuts down again. I seriously can't use 3G!!! The iPhone will not let me! Sometimes when I open the camera to take pictures, the iPhone turns off!
Is there any way to fix this, has anybody faced this problem, how can I fix it? I have done a restore but it did not work, if I have done it corrrectly.
I currenlty running iOS 7.0.2.
I will appreciate the help.
Regards,
Firas

Hi firaskurdi
i also ipone user, v6.0.1, maybe your problem are similiar to me.
i have done the following:
hard reset - done
soft reset - done
restore itunes - done
battery calibration - done
firmware 7.0.4 - do not want to perform too because ios7 heard that is drain battery faster than previous firmware.
but do not use.
maybe you can do a battery calibration 1st, means full charge, turn off 3G, use it until 0% and let it shut off, charge back, turn on iphone, wait it charge until 100% without interruption.
then you do a reset on network settings.
i go to apple store, they have same technical knowledge with me, ask to change a new board, or buy a new phone. wow...incredible, my iphone was 1.5 years old and never drop to floor before.
thanks.
gan~

Premiere Elements 11 Sound turns off after 5 seconds on DVD

Hi Folk,
I have been using Elemnts 11 for a few months with good success. I created a video from 8-9 clips and it play fine in the tool. I can see the images OK and hear all the audio throughout the video. When I burn a DVD to a Folder on my laptop and play it using Quick time the audio drops out after about 5-6 seconds. I also did a test run and burned the DVD files to a physical DVD and tried to play it and got the same result of the audio droping out.
Thaks For you help,

SnapDragon_M5
Bottom line: I have no problem taking your M2U00715.MPG file into Premiere Elements 11 NTSC DV Widescreen project and burning it to DVD-VIDEO Widescreen on a DVD-RW (4.7 GB/120 min) disc, with full playback of video and audio on the computer or via the DVD player of my TV.
These are the details:
Your source media
720 x 480 @ 29.97 interlaced frames per second. MPEG2 video compression and Dolby Digital Stereo 2 channel audio. This interlaced video is characterized by Fields = Upper Field First, so this must be taken into consideration when the end product is DVD-VIDEO whose format calls for Fields = Lower Field First.
Importing the file could be done two ways:
a. Add Media/Files and Folder/ and then dragging the file from Project Assets to the Timeline. The program should automatically set the project preset at NTSC Hard Disk Flash Memory Camcorders Widescreen 48 kHz because it is recognizing that Fields = Upper Field First. Check Edit Menu/Project Settings to verify that is indeed what the program did.
IMPORTANT. When you bring the file into Add Media, look for a progress bar at the bottom right of the interface. I found an Indexing, followed by a Conforming process at that point. Do not proceed with any work until after those activities are completed and the progress bar closes.
or
b. Opening Premiere Elements 11 Windows, going to File Menu/New/Project, selecting NTSC DV Widescreen in the New Project dialog, putting a check mark next to "Force selected settled Project Setting for this project" and exiting from there. Then I imported the clip with Add Media/Files and Folders to Project Assets from where I dragged the file to the Timeline. On the Timeline, I right clicked the clip, selected Field Options and its Reverve Field Dominance option.
I used b.
What was on that Timeline had a duration of 50 minutes and 47 seconds. In the burn dialog, the Quality section, the Space Required = 3.15 GB and Bitrate = 8.00 Mbps (megabits per second). The DVD-VIDEO was produced via Publish+Share/Disc/DVD disc, using the preset = NTSC_Widescreen_Dolby DVD. The DVD-VIDEO on DVD disc was completed in about 30 minutes. It played back with Windows Media Player, VLC player, CyberLink Power DVD with full video and audio.
In view of the above, I would suggest the following:
1. Repeat what I have just described as a successful run. Take the Organizer out of the equation for now and import the file directly from its hard drive save location via Add Media/Files and Folders.
2. When that file hits Project Assets, do not drag it to the Timeline until you are sure that there is no progress bar at the bottom right of the interface, indexing and/or conforming the file.
3. If there is no sound or only a bit of sound on the DVD-VIDEO disc produced, then take the disc to someone else's computer to determine if the file has no sound with this other person's player (computer or TV DVD player).
4. This one file has a file size of about 2 GB. How many files are you typically burning to DVD-VIDEO from the Timeline. In this context, how much available RAM and free hard drive space does your computer have? Are you getting any low memory messages at any time during the workflow?
Please review, let us know the results, and we will try to help further if needed.
Thanks.
ATR

Why does sound turn off after loading swf?

I am loading an swf into this MC created by AS, and the
sounds that play in the swf are lost. Why would that be?
this.createEmptyMovieClip("mHolder2",
this.getNextHighestDepth());
this.mHolder2.createEmptyMovieClip("mContent2",
this.getNextHighestDepth());
m1Loader.loadClip("successTool.swf",
mHolder2.mContent2);

As I was calling apple, I was playing with the settings and discovered the setting in "back light" - it was only set for 10 sec.!

Sound for messages and e-Mail get turned off after using handsfree in car

Does anyone have a solution when sounds alerting messages and e-mails are turned off after using the phone in var with handsfree (using Bluetooth)? The sounds are turned back on when restarting the phone but reoccurs after driving in car with handsfree again. This is very annoying when takling several trips with car during a day. The phone still rings when receiving a call.

I did find a solution to my iPhone-iPod-music-overriding-streaming-streaming-services-while-connected-to-USB problem Although, this solution is likely only applicable to BMW owners with the BMW Apps feature aka 6NR.
There may be other/simpler ways, but this seems to work:
1) Launch Pandora (or could be Mog, or other BMW Apps app) BEFORE you start iPhone/iPod playback
2) Start playback of Pandora via ConnectedDrive/BMW Apps.
3) Press Home button on iPhone, launch your streaming app.
The car still seems to think it's in the ConnectedDrive audio menu, as evidenced by the Entertainment details screen. You can now consistently play back any other audio service via your iPhone without the iPod audio overriding what you're doing. Good times! The only drawback so far is lack of ability to skip tracks via the steering wheel.
As long as you haven't started iPhone/iPod playback when you get in the car, you can often skip steps #1 and #2, and go straight into the ConnectedDrive menu, then go to step #3. Either way, following steps #1-3 works everytime.

Why does my Sony Sound bar CT60BT turn off after 15 minutes?

I turn the volume down during the evening and when I do, it automatically turns off after about 15 minutes. Is there a way to change the settings so that it doesnt go into standby mode?

Hi mdalton1284,
Your Sound Bar has an Auto Standby Function.
It will enter standby mode automatically when you do not operate the Sound Bar for about 15 minutes and the Sound Bar is not receiving an input signal but the sound bar is receiving signal from your PS4 going to the TV via HDMI connection.
You may try resetting the Sound Bar.
Follow the steps below.
Use buttons on the remote control for the operation.
Press BASS +, VOL - , and TREBLE + in that order within 3 seconds.
Let us know if you're getting the same result after resetting the device.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

W520 - now changes to "projector only" whenever display turns off in power save mode

I have my W520 in a dock with an external monitor. The display is configured to Extend - the external monitor is primary, and the desktop extends onto the W520 screen. I don't have a screen saver. I turn off the display after 30 minutes of inactivity. Until recently both the laptop and monitor screens would turn off after 30 minutes, and then both resume when I moved the mouse or pressed a key.
Recently, the system has started changing to "Projector Only" when the display turns off. After resuming from power save mode, only the external monitor activates, and the W520 screen is disabled. I have to use Fn-F6 to switch back to "Extend" to re-activate the laptop screen.
I have rebooted and re-saved the power plan.
Why has this happened, and how do I fix it?

Hi, timg11
I have a few questions so that I may gain a better grasp of this issue:
1) What is your machine type and model? You can find this information on the bottom of your machine. It should be in format XXXX-XXX.
2) What is your operating system?
3) Does this issue occur is the computer is not in the docking station? (Please try if you haven't already).
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

When the sound turns off on my macbook, the miniplug stereo port emits a wildly uncontroled load leading to noise.

When the sound turns off on my macbook and my macbook pro, the miniplug stereo port emits a an enormous 'pop', i.e. wildly uncontroled load leading to noise. Goundline hum follows. I am running OS 10.6.6. I have noted previous threads noting the same problem on OS 10.4.x and 10.5.
How do I stop my mac from trying to ruin my stereo and speakers every time I connect them?

You don't say which year you have, however...
...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
Good luck,
Clinton

File Sharing Turns off

Hi, I've just set up an intel imac and wanted to connect it to my home network. I can connect from this computer (imac) to an ibook running 10.4.6, but when I try to connect from the ibook to the imac, the connection drops and file sharing turns off by itself.
I can switch it on again, but once i try to connect it turns off by itself again. Any ideas?
Thank you very much

http://discussions.apple.com/thread.jspa?threadID=352820
after trying all the usual stuff (permissions repair, change sharing name, reinstall & archive, etc) followed by a 1.5 hour call with apple (which had me doing the exactly same stuff all over again) i could only solve this problem by starting from scratch: backing up the relevant files, wiping the drive and reinstalling everything.
i keep a drive with all the most current installers of everything we use in each studio so we can get it all back even from a totally empty drive to up and running in about 2 hours.
good luck.

Iphone 5 Sound Turns Off

Hi guys, my iphone 5 sound turns off by itself after about 8 hours. Anyone knows what could be going on thanks?

I just updated to 7.1 and I am having the same problem. From the home screen, I don't hear text sounds. If I open the imessage app then you hear it, from home screen you don't. Rebooted once... no help.

Stuck in recovery mode and turns off after 30 seconds

Hi everyone,
I have done my research but no one seems to be having the exact same problem that I have. Here's what happened:
When I was updating the firmware of my Ipod Touch 4g iOS to 4.2 in a MacBook Pro, it suddenly cut the USB power because it was low on battery. After which, my Ipod now only goes from the apple logo to recovery mode (connect to itunes screen)then turns off after about 30seconds.
It still gets recognized in iTunes but it doesn't stay powered on long enough for something to be done (restore, iRecovery, etc.). I have tried doing the DFU to recovery mode, holding the home button when connecting the cable, etc.
I have everything backed up so restoring is not an issue. I just need it to work.
Help!

Not sure if this is the same problem exactly but all of a sudden my phone was stuck in headphone mode & wouldn't make sounds through the speakers at all. This was because of a dirt/dust buildup in the port. What I did was hold the phone & a flashlight in one hand & scraped out the crap with a safety needle/pin thing. This was very useful because I could exactly see where the stuff was & eventually I dug it all out. Works fine now! Hope this helps you/anyone else having a similar problem

Exported projector.exe file - sound turning off after a while

Similar Messages

Maybe you are looking for