Exported QTmovie doesn't play properly when burned on a DVD AS a QT movie!

I exported my video using export>QT movie and "saved" on my desktop. Its 5 minutes and 1.1GB. When I drag from my desktop to my QT movie applicatoin, it plays perfectly. HOWEVER, if I take that same movie and burn to a DVD as a QT movie for others to just play using their QT players, the movie on the DVD starts and then the video stalls and then starts and stalls etc. I tried seveal times and even used different computers to try it.
Any help would be greatly appreciated.
Thanks,
Skip

dvd drive can only read so much data per second. data is terms of bytes, mega, giga, tera etc. the rate at which data is exchanged is referred to as the bit rate. doing crude math one can determine the bit rate of your video or you can right-click the file get info and see the bit rate. It's not the entire size of the file it's the amount of data that is transferred per second.
hth

Similar Messages

Site doesn't display properly when viewed in Windows 8.1 and IE11

Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

Elements 9 Projects plays fine on computer however when burned to a DVD it drops the last part

Hello,
this is my first post and first Question ever on Adobe site. I hope thatt someone can help. I have used Elemenys 3.0 for a number of
years. I have now upgraded to Elements 9. I am having an odd problem with a project that I am working on. Everything seems to be OK on the EDIT
and on the DVD PREVIEW mode ; However when burned to a DVD, I am loosing the last part of the project, and the laat scene button does not take me to the correct scene, It takes me to the one just BRFORE it. When the burning process is done, it shows that it all went well. No error messages. Does anyone have any thoughts as to what is causing this?

hi photonutguy,
Since your question is about burning your video to a DVD disc, it is actually an Adobe Premiere Elements question. This forum is specifically about Photoshop Elements and is frequented by people who use Adobe Photoshop Elements for their photos.
there is a separate forum for Adobe Premiere elements where you will find the people knowledgeable in the video process for burning that DVD with menus at
http://forums.adobe.com/community/premiere_elements
So I recommend that you post your question at that Premiere Elements forum .

Arabic text doesn't render properly when export to PDF

Hi
I am having problem with exporting Arabic text to pdf and it doesn't render properly. The whole content render properly expcet the white space; the funny charater has been replaced to white space.
Does any one having that problem?
Note: I have tested with using both Crystal Report Designer XI and Crystal Report 2008 which come out same result.
Thanks,
Yin

Morning Yin,
Did you have any luck with the download? The link I sent you does not need to download using username and password.
Additionally I doubt if your company would know what your username and password is for SAP as you got to request SAP to get one.
here is the link to the registration page.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/new_user_pass/infouser_request.htm]
Register yourself first and then you will receive the username and password for it.
Hope this helps
Regards
Jehanzeb

Filemaker exported Excel doesn't open properly

I've got a Filemaker database that I "Export Records" or "Save Send Records As" data in Excel format. When i open the file in Excel it is all correct, but when I open the xls file in Numbers 2.0.3 it doesn't open properly. You can see the discrepancies in these 2 screenshots.
First the Excel file , beside it is the Numbers rendering of the same file. You can see around A:16 it goes off, again at A:25 and then some repeating at the end to fill up the row. Column B however is correct in Numbers.
!http://rdiv.com/screenshots/FilemakerExportExcel.png! !http://rdiv.com/screenshots/FilemakerExportNumbers.png!
The strange thing is if I save the Excel file then it opens in Numbers correctly. If I export as CSV it opens in Numbers correctly.
Any ideas?
Thanks,
jim

Thinking it's a FMPro issue (I have posted this in the bugs forum at FM.com) I've repeated this experiment with the data records sorted differently (to see if it's any particular record that is the problem). The export still is wrong when opened in Numbers, the mistakes appear to be in the same rows, i.e., row 16, row25, etc.,

Preview ok,but doesn't work properly when build dvd

everything is ok when preview but when i built to dvd folder,media player classic only could play separate dvd file,and no main menu. then i try windows media player, the main menu came out but none of the buttons work.
Any ideas? Thanks a lot

sorry about the multiple posts. mines is encore DVD 2.0 trial on windows XP. I've checked the help and FAQ but none of them related to my situation. I've got 1 sub menu with 1 main menu. no problem when preview but when i built a dvd folder it doesn't work properly. media player classic couldn't play the main menu, sub menu work but not the buttons on it. windows media player can play the main menu but none of the buttons work either!! I've been working on it for a whole day. course work deadline is this Thu, so please give me some advice. Many thanks.

The cable doesn't work properly when connected as data cable.

Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
Farhan

Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

MP4 file doesn't play immediately when I move forward or backward in Media Player

Hello there,
I have a problem with Media Player and I appreciate if someone could help me.
I have a project created in Adobe Premier CS5, all footage are 1920x1080 29.97 fps. After I done with editing I encoded with adobe encoder with the following details:
H.264
1280x720
29.97 fps
Level 3.2
AAC
Audio 192 kbps
VBR, 1 Pass
Target 4.00, Max 4.00 Mbps
Also selected Use Maximum Render Quality
I rendered the first half of the video and played it in Media player, when I move the file forward or back it takes almost 20 sec. to play again that part of the video. It plays fine with VLC player and Quick Time, but not media player. I tried another video from someone else and it doesn't have this problem with Media player, it plays fine when I move the video forward or back.
Could You please some one tell me what I am doing wrong? is my setting wrong? Unfrtunately I cannot ignore Media player and use another player because this file is for an online display which the browser is Media Player.
Thanks,
Masoud

OK.
That doesn't necessarily eliminate the media player as the issue, though. I have files that play fine in Windows Media Player or VLC, but will not play correctly in my preferred KM Player. Their's nothing wrong with the files, it's just the player isn't designed to handle them.
So there may well be something different about this file, but not necesarily something wrong with the file. The issue could still be with the player. That the file works in two other players is pretty good evidence of that theory.

Doesn't play music when docked

My iPhone 4 does not play music when docked on any type of docking station or when I plug it into my iTrip in my car. It still charges just fine, but immediately stops playing music when plugged in. When it is plugged into external speakers, it stops playing on its own speakers as well.
I also have an unrelated problem that came up yesterday: my phone's power button is jammed up. I cannot even push it anymore. This is my 3rd iPhone in less than a year that has had this problem. I don't think I push the button very hard at all, not anymore than anyone else. What makes this happen, and can I get it fixed without paying out the *** and without taking it apart myself? I got my phone from Best Buy as I don't have an Apple store within 150 miles of me. I am currently using AssistiveTouch instead, which is just plain annoying. Please help with either problem if you can!

Recently, I have the same problem but with my B&W Zeppelin, and it turned out it was the problem of B&W and has sent it for service.

Any Way Of Removing Bad Panning Judder When Burning HDV to DVD ?

I have tested this many times and haven't found a cure using iDVD.
When I make a DVD from HDV footage I get very bad judder on vertical lines (lamp-posts, window frames etc.) whenever the camera pans, even extremely slowly.
I also get judder from people walking slowly across the frame.
This happens whenever I Export>QT Movie in FCP and burn in iDVD (using any of the 3 quality settings).
The only cure I have found is to Export>Using Compressor and then burn the DVD in either DVDSP or Toast.
Unfortunately the MPEG2 files can't be used in iDVD.
For various reasons I would, if possible, prefer to use iDVD.
Has anyone come across this HDV problem and found a way of eradicating it in iDVD ?
It would appear that the QT Movie is the weak link causing the problem.

The problem only occurs in iDVD (and Toast) when the encoding is to DV-PAL, HDV
Keep in mind I don't work with PAL at all nor do I own an HD camcorder yet.
But I've seen this same situation before on this forum when working with PAL only.....
I'm wondering if JES deinterlacer will help here or not?
http://www.findmysoft.com/mac/JES-Deinterlacer-download.html
@F Shippey ..... any thoughts here Fred?
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Very Poor Quality when burning to regular DVD

Can somebody tell me why when i burn to regular dvd the quality looks like a vhs video which is out of focus ? When i burn to blu ray its crystal clear !! I dont expect great great quality but i would expect something that is watchable !!

Well if you are working with Premiere Elements 10 or above and want high Blue ray Quality content on DVD discs, then you have got the option of AVCHD disks in Share->Disc->AVCHD.
But due to high bit rate, the amount of content that can be burnt on to AVCHD disks is much lesser than on to DVD disks.
You can change the bit rate and increase the amount of content that can be burnt(but that will once again start diminshing quality)
You will have to manage this quality-size tradeoff.

Aliasing When Burning 16:9 DVDs

for weeks, i've been trying to improve my HD to SD conversion. the MPEG2 always looked great on my computer monitor, but i saw aliasing and jaggies on my television when i watched the DVD. i now think i've discovered that my downconversion is fine, but it's the 16:9 aspect ratio that is making my DVD look bad.
on a hunch, i created a "matted" 4:3 version of my HD timeline, and burned a 4:3 DVD (with black bars on top and bottom embedded in the video), and it looks great! but why is that? i've tried multiple TVs and multiple DVD players, and every anamorphic DVD has jaggies on the text and angles...but when i burn a matted 4:3 of the same timeline, it looks perfect. any ideas?

No, that is not the way it should work. This may help:
iDVD: DV widescreen 16:9 workflow from Final Cut Pro
http://support.apple.com/kb/TS2179?viewlocale=en_US
Final Cut Express: DV widescreen 16:9 workflow for iDVD at http://support.apple.com/kb/TS1611
and
Preparing your Final Cut Express or Final Cut Pro movie to work with iDVD at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6652.html

PREMIERE ELEMENTS 7 CLOSES WHEN BURNING PROJECT TO DVD

Hi - I am a new Premiere Elements 7 user. After completing my first project, I attempted to burn to a DVD. I clicked on Share - then Disc. A message came up saying there was a problem and Premiere had to close. I tried this several times.
I did post this problem on Muvipix.com, and received several suggestions from Steve and Chuck, but none of them worked and I'm not sure if they really understood the problem although they did try very hard to help me.
I switched over from Pinnacle because of all the problems I had with them, and I was hoping it would be a simpler process with PE7, but this supposedly basic function isn't working.
I have a brand-new Dell Computer (one month old) with these specs:
Intel Core 2 Processor (2.33Ghz, 1333F SB) w/Quad Core and 4MB Cache
6GB DDR3 SDRAM at 1067 MHz
ATI Radeon HD 4850 XT 512MB
750GB Hard Drive 7200RPM
Vista Home Premium Operating System (64-bit)
16X DVD+/-RW and 16X DVD-ROM
So it's a loaded computer.
I would appreciate any help I can get to solve this problem.
Thanks.
BOB FLEISHMAN

Bob,
I found that by removing everything except Windows, re-starting, installing latest version of Quicktime, re-starting, installing Elements 7, re-starting and then re-installing the rest. It's very time consuming but it eventually works and one can export mpeg as well as burn DVDs.
Alaister Macrae

Album Shuffle Doesn't Work Properly When Albums Have The Same Name

I'm using the latest versions of iTunes 7.0.2 and 5.5G iPod v1.2.1, but this problem has existed in (as far as I know) all iPods to date. It certainly still continues to occur on the latest iPod.
Example of the problem: I have many Albums by different Artists. I listen to them on my iPod by using "Album Shuffle" which plays the contents of an album in sequential order, but successive albums in random order. This is good when it works. However, iTunes and iPod have a problem when more than 1 album has the same name. So, let's say you have 3 albums by 3 different groups (Band A, B, and C), all called "Greatest Hits". The expected behaviour is that "Greatest Hits by Band A will play tracks 1-10, then another random album, and then sometime later, the album "Greatest Hits" by Band C will play tracks 1-15. That would be good, but this does not happen. Here's what actually happens:
Some Album / Band X / Track 14
Some Album / Band X / Track 15
Some Album / Band X / Track 16
Greatest Hits / Band A / Track 1
Greatest Hits / Band B / Track 1
Greatest Hits / Band C / Track 1
Greatest Hits / Band B / Track 2
Greatest Hits / Band A / Track 2
Greatest Hits / Band C / Track 2
Greatest Hits / Band B / Track 3
Greatest Hits / Band C / Track 3
Greatest Hits / Band A / Track 3
... (until all "Greatest Hits" tracks by Bands A, B, and C have finished)
Another Album / Band Z / Track 1
Another Album / Band Z / Track 2
Another Album / Band Z / Track 3
As you can see, the iPod treats all 3 "Greatest Hits" as one humungous album. Now, until version 7, even iTunes appeared to be pretty confused about this, but with the latest version added the "Album Artist" tag (which I've applied correctly to all tracks in my Library), so that it can identify albums as separate entities properly, even if they have the same name. (This was necessary for Cover Flow to work.) Sadly, this logic has not made it to the iPod, and we still have the crazy playback situation above.
Since the first day I bought my first iPod back in 2002, I've always used Album Shuffle, and this has always been a problem. I was surprised to find that even the latest iPod still hasn't fixed this, even though iTunes seems to have. Apple, please could you fix this?
iPod 5.5G, iTunes 7.0.2 Mac OS X (10.4.8)
Power Mac G5 Dual 2.3 GHz Mac OS X (10.4.8)

BTW, I'm not looking for workarounds that involve renaming albums. What if I have 158 "Greatest Hits" albums?

Bought an album on itunes, one of the songs on the album doesn't play properly

I just purchased the album Saints by a band called Destroy the Runner The sixth track on the album (The Aleph) plays up to about 1:45 then skips to the next song. What should i do to fix this? how can i listen to the full song without this problem occuring?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Exported QTmovie doesn't play properly when burned on a DVD AS a QT movie!

Similar Messages

Maybe you are looking for