Exported Slideshow Repeats Intro Slide for more than one minute

I created a slideshow in iPhoto 9.5.1. I exported the slideshow as a movie. When I play the exported movie, it repeats the intro slide in the middle of the movie for more than a minute at a time. Any advice? Thank you so much!

Does the slideshow play correctly in iPhoto? Did you create the slideshow directly from an album and then exported it for from the slideshow mode?
NOTE: slideshows created in albums with the photos sorted manually will not play correctly. Only photos sorted by one of the other options play as they should.
OT

Similar Messages

Ipod nano not playing audiobooks for more than one minute at a time

Does anyone know how to fix this problem? I stopped using it after I couldn't play an audiobook for more than a minute before it stopped. A friend thought she had fixed it, but I downloaded another audiobook to the ipod nano and it did the same thing...played for a minute and then turned off. I want to take it with me on a 8K walk, but it is discouraging.

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

How to export or delivery report for Excel for more than one sheet in OBIEE

Hi Experts,
How to export or delivery report for Excel for more than one sheet in OBIEE 11g? (Every time, I can only see one sheet.)
Is it possibl to implement this requirement?
Thanks.

there are 2 oprions,
One is have your tow report in a single compound layout of analysis and keep the report in dashboard and give report links.
it will cath both your report.
Suppose your analysis are different.
Then you have the option of printing it to a PDF. on ritght top of Dashboard, Print - > Printable PDF.
you ca export to PDF no to excel.
mark if helps,
fiaz

Slider with more than one thumb

Hi,
does anybody know a slider with more than one thumb?
The JSlider-class only provides one thumb, but I need more thumbs to displace.
That why I posted the last question: I found one in the web but when I call the constructor, I get that error.
Thank you all
Katharina

Hi,
I also tried MThumbSlider, a.k.a. CMThumbSlider (C for
Cougaar?), the slider with more knobs. (keywords: slider,
knob, knobs, thumb, thumbs, more, two, three.)
I downloaded the code from the link mentioned below,
run the example and it worked just fine. When I tried
to subclass the slider to add tooltips I got an exception
from the loader:
UIDefaults.getUI() failed: no ComponentUI class for:...
The slider has its own package. Its constructor
(indirectly) calls the following utility function,
passing itself as an argument, just before calling
JSlider.updateUI. The latter then calls UIManager.getUI,
which fails with the exception mentioned above.
public static void setUIName(JComponent c) {
    String key = c.getUIClassID();
    String uiClassName = (String)UIManager.get(key);
    if (uiClassName == null) {
      String componentName   = c.getClass().getName();
      int index = componentName.lastIndexOf(".") +1;
      StringBuffer sb = new StringBuffer();
      sb.append( componentName.substring(0, index) );
      String lookAndFeelName = UIManager.getLookAndFeel().getName();
      if (lookAndFeelName.startsWith("CDE/")) {
        lookAndFeelName = lookAndFeelName.substring(4,lookAndFeelName.length());
      sb.append( lookAndFeelName );
      sb.append( key );
      UIManager.put(key, sb.toString());
}When the slider is subclassed outside of the package,
the above results, e.g., in
UIManager.put("MThumbSliderUI", "MetalMThumbSliderUI");thus the package name is lost. To correct such behaviour
I changed the substring with the package name, including
the last dot. The same goes for function createUI.
There is another thread on this subject:
http://forum.java.sun.com/thread.jsp?forum=57&thread=348245
The link were I found the code is
http://www2.gol.com/users/tame/swing/examples/JSliderExamples1.html

Can you make a movie for more than 2 minutes on an ipad and save it on a flash drive

Can you make a movie for more than two minutes on the ipad and sve it on a flash drive using windows XP

Using Apple's camera connection kit, you can use a flash drive to IMPORT photos and videos. However, you can't EXPORT any type of file to the flash drive.
 Cheers, Tom

Reason for more than one sales organisation

Hi,
What can be the different reasons to suggest the client for more than one sales organisation.Please reply ASAP.
Regards
Prabudh

hi,
Sales orgainsation controls the entire business process.
Example : If u have Domestic factory sale , Domestic depot sale , Export , Deemed export , intercompany sale , stock transfer ...etc . This can be controled through maintaining different Distribution channels .
And , the same way ,based on material group you can differ division to have more control.
Disadvantage : Having more sales organisations will lead to have more master data .
saravanan

Creating SQL-Loader script for more than one table at a time

Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant Rane

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy Ghosh

The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

Setting Equalizer for more than one song at a time

Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Author

highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
     at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
     at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
     at WLSecurityTest.runTest(WLSecurityTest.java:75)
     at WLSecurityTest.<init>(WLSecurityTest.java:66)
     at WLSecurityTest.main(WLSecurityTest.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
     at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;

If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

I just updated to iOS 6 and now whenever I'm in an app for more than 5 minutes the app will close and I can't get back in it for 10 minutes. Can anyone help? Please?

Okay, so I just updated to the newest iOS 6 version on my iPod. And now I can't be in an app for more than 5 minutes without the app closing and I can't get back into the app for at least 10 minutes. Somebody, anybody please help me! This is getting really annoying!!! Please please please!

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Help me to search on calendar for more than one year

I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system. I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?

Jens,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Exported Slideshow Repeats Intro Slide for more than one minute

Similar Messages

Maybe you are looking for