Exported SWFs have reduced detail

Hi there,
We are having an issue with Flash Pro CC - one of several now - in that when we export out our SWFs for compositing, they do not have the same quality - so smoothlines are replaced by jagged lines, beautiflu curves are replaced by hard edges.
When we export to PNGs or JPEGS everything is fine, but in our pipeline we need to use SWFs.
Does anyone have the same issue and if so do they have a fix for these exported SWFs?
Thank you

I mentioned that we do this already in After Effects.
The issue is not with AE, it's with the SWFs themselves when they run in Flash Player at full quality.
The smoothed fills look jagged.
I want to know if there is some kind of quality filter in Flash for exporting out the SWFs as at the moment it appears to be broken - I am assuming this is due to the constant inundation of X.x.x releases of CC rather than a solid point release with less bugs and more fixes.
G

Similar Messages

Exported swf formatting differs from preview mode

When I view a model in preview mode, everything looks fine with the formatting. However, after exporting the file (or viewing the export preview), some of the formatting is incorrect - such as axes labels and titles being truncated or moved from their original position, as well as grid sizes changing so that what I have aligned no longer is aligned.
I can make formatting adjustments in the model so that it appears more properly in the exported swf file, basically correcting for these differences. However, this is obviously not ideal, and I have not been able to identify any patterns in these discrepancies (sometimes it looks fine, other time not). I appreciate any suggestions!

Hi,
I am facing the same issue too. The whole formatting goes off once exported to ppt. The fonts reduce to such an extent that I cannot see the fonts. If I drag the swf component to full screen in ppt, the labels, come over the axes.
Please let me know how to correct it.

What Frame Rate does Catalyst export .SWF at?

What Frame Rate does Catalyst export .SWF at?
When I import a SWF file from Catalyst into another flash program, won't display never mind play, the error I get is that the frame rates don't match,
therefore I need to know what frame rate it exports at?

If you have a SWF created by Catalyst, and you're using that SWF in something you're creating with Flash Builder or Flash Pro, then I think frame rate shouldn't matter. But maybe if you can give more details I could help more... Which flash program are you importing the SWF into, what commands or code are you using to do the import? Is there an error message or alert, if so what does it say? Any info you can provide will be helpful.
Thanks

How to set a loop on an .flv so that an exported .swf loops?

hi there. i am using Flash CS4 and I would like to know how to set a loop in an flv file so that when it is exported to swf, the movie will loop. Basically i have taken an existing interactive flash movie and have decompiled it into its individual flv counterparts. what i intend to do is take out all the nonsense from each flv file and then reconstruct the flash movie, export each file to swf and then convert each swf to avi or some other video format. to do this i will be using sothink swf to avi converter which allows you to convert swf files to avi files. this program allows you to convert swf files that loop by looping the swf file for as long as you want until you stop it, in which a video file is created from "the recording"
after i decompiled the original file, many of the existing flv files were already set to loop. i know this because when exported to swf the swf file would loop. now when i went ahead and went into each flv file to edit a couple things, when i went to export them to swf, the swf files wouldn't loop. mind you, some of them did loop, and some of them did not loop. the ones i have edited are all supposed to loop and i cannot figure out what it is thats preventing some of the flv or exported swf files to loop. all i did was take out a few unnecessary frames from the beginning of each flv and nothing more. i am pretty new to Flash and do not know anything about coding and know very little about flash settings.
i figured that selecting the "loop playback" option in the control drop down menu might help seeing as the flv file does loop when played in the editor, but again when exported to swf the swf file does not loop. what confuses me the most is that some of the exported swf files do loop. ALL of the exported swf files need to loop and my guess is that in order to make that happen, something in the flv file needs to be set correctly.
can someone please assist me with this issue? if there is a way to simply loop an existing swf file that does not loop, can someone tell me how to do that? any help with this problem is greatly appreciated and i appologize if something like this has been asked before.... i just couldnt stand looking through 22 pages of search results to find the exact solution to my problem
thank you!!!

Hi,
You can use shortDesc property. Something like
<af:commandToolbarButton text="Some Button"
id="ctb1" shortDesc="This button does something.."/>-Arun

Why does my exported swf show more content than actually on frame?

Why does my exported .swf show more content than actually on frame?
My problem is relatively simple, though, I had some trouble finding a solution to it:
When I play my exported animation using flash player in Google Chrome, if the window is bigger than the resolution flash document/frame, it shows content not meant to show up on the frame -- like parts of a huge background that aren't supposed to show up yet.
In other words, how do I constraint the .swf to the white background/document resolution?

Anyone? I'd appreciate it if someone replied soon -- I am done with my project once this issue is resolved, and I am excited to publish it.
Please respond if you have any useful knowledge on the matter!
Thanks!

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?
I know I can use AS code,likes "[Embed]" metadata to embed binary in swf. But , how can I do that in Flash CS5 ?

Have a look at this: http://stackoverflow.com/questions/7816231/how-to-use-as3-to-load-binary-data-from-web-ser ver

Export SWF from AE CS6

I used to be able to export SWF files directly from AE CS3. But am having difficulty performing that same task in CS6. Under FILE/EXPORT there is an option to choose "Adobe Flash Player (SWF)". However, when I output the file it appears to start rendering, then almost immediately the render window dissapears. I don't receive any kind of error message at all. It simply creates an SWF file with no content in it. Does anyone have an idea what the issue might be?

I have the emails from Adobe in regards to this bug. Here is the email I received:
Hello Don,
This is in regards to the issue that you are facing in exporting the .swf files from After effects CS6.
It is a bug and Development team is working on this issue.
The bug number is 3345048.
We will release the fix for this in the next update.
I am closing this case as of now.
If have any queries , please feel free to get back to us on 1-800-833-6687
I then receive this email within hours of receiving above noted email:
Adobe Case Update and Feedback Opportunity
Your Adobe ID: Fyredept
Your Case Number:XXXXXXXXXXX
With this response, we believe your issue is resolved and have therefore closed your case XXXXXXXXXX. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed.
Your feedback is important to us. Please take a moment to let us know how we're performing against your expectations by completing our survey.
Take the survey
To review your case history or reopen the case, log in to the Adobe Support Portal online and look for your case number in the "recent activity" section. If you have difficulties logging in, consult the Adobe ID and Membership FAQ.
Thank you,
Adobe Customer Care
To date nothing from Adobe either in the form of a fix or time frame for that fix. Looks like I will need to call again and push the issue a little. Not to much though as to tick them off and not get a fix. I will continue to keep on this with you.

Lightroom exporting to JPEG without Detail settings

In Lightroom 3.3 (on OS X 10.6.4), when I export a photo with Detail settings (noise reduction, etc) to JPEG, these settings are not in the JPEG.
Am I doin it rong? This is illogical and frustrating.
Library:
Develop with Detail on:
Develop with Detail off:
Exported JPEG:
They all appear to be a bit different, but the jump from Library/Develop with Detail on to JPEG is pretty drastic.

I've been having a similar problem recently in Lightroom. At first I thought it was because I shot an event with fill-flash in daylight and I thought my white balance was messed up because of cross contamination of light. But, since that shoot 2 weeks ago EVERY other shoot (around 1,000 images) have been giving me very weird white balance problems. Essentially, my images seem "greyish" so, I boost temp and tint, I boost vibrance, I try all sorts of tweaking until the image looks passable, but not nearly my typical color and saturation look and feel. The processed images in Lightroom still seem a bit under saturated and just "not right." BUT, when I export them... they're OVER saturated - kinda like the numbers in Lightroom tell me the image should look. So, it seems that the display in Develop mode is under saturated and "off." But, I have no idea how to correctly compensate. I feel like I have some hidden setting set incorrectly - Any thoughts? Ideas greatly appreciated. If a screen grab would help I'll try that.
I'm in Lightroom 2.5 and Camera Raw 5.5
I'm on a PowerPC Mac running OS X 10.4.11
Jay
Message was edited by: jjlevan - I came back to post a screen grab from Lightroom and the JPG which looks like the Lightroom settings you see with the tint and vibrance boosted. But the Lightroom image looks UNDER saturated or almost normal.

Can you have two detail lists from the basic list at the same time?

Hi
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
Thanks
Venkat

No   ... it is not   possible   of   2 detail list at   one time   from the basic list ...
you can increament   the SY-LSIND .... But you can not   display both the windows   at single time ...
it is possible to display 2 Detail list in ALV   ...... from one basic list   using the Blocked list concept    .
Sample Program on BLOCK LISTS
Report   zblock_list
* Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:slis.
DATA:x_layout TYPE slis_layout_alv,
t_field TYPE slis_t_fieldcat_alv,
*--field catalog
x_fldcat LIKE LINE OF t_field,
*--to hold all the events
t_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
t_sort TYPE slis_t_sortinfo_alv,
x_sort LIKE LINE OF t_sort ,
*--Print Layout
x_print_layout TYPE slis_print_alv.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE add_catalog.
clear x_fldcat.
x_fldcat-fieldname = &1.
x_fldcat-seltext_m = &2.
x_fldcat-outputlen = &3.
x_fldcat-tech = &4.
x_fldcat-col_pos = &5.
x_fldcat-no_zero = 'X'.
x_fldcat-ddictxt = 'M'.
x_fldcat-datatype = &6.
x_fldcat-ddic_outputlen = &7.
if &6 = 'N'.
x_fldcat-lzero = 'X'.
endif.
*--build field catalog
append x_fldcat to t_field.
END-OF-DEFINITION.
*----- data declerations.
data: v_repid like sy-repid.
data: begin of itab occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
meins like mara-meins,
end of itab.
data: begin of jtab occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of jtab.
select matnr ernam meins
up to 20 rows
from mara
into table itab.
select matnr maktx
up to 20 rows
from makt
into table jtab.
v_repid = sy-repid.
*DISPLAY alv
* Initialize Block
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid.
*Block 1:
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
x_events-form = 'TOP_OF_LIST1'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'ITAB'
it_events = t_events
it_sort = t_sort
tables
t_outtab = itab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
x_events-form = 'TOP_OF_LIST2'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
* Append table block.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'JTAB'
it_events = t_events
tables
t_outtab = jtab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* exporting
* is_print = x_print_layout
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_list1.
skip 1.
write: 10 'List 1',
/5 '--------------------'.
skip 1.
format reset.
endform.
form top_of_list2.
skip 1.
write: 10 'List 2',
/5 '--------------------'.
skip 1.
format reset.
endform.
reward points if it is usefull ....
Girish

How Can I make my .swf "See Product Detail" link in Dreamweaver

Hello All:
New to Dreamweaver. This should be a simple click solution, but I can;t find it.
I made a .swf "See Product Detail" button in Flash and I imported it into
my Dreamweaver product webpage.
How do I make it link to another page where the larger product photo is located in Dreamweaver?????????????/
Thanks,
Madame Frustrated

I made a .swf "See Product Detail" button in Flash and I imported it into
my Dreamweaver product webpage.
Pardon me for saying, but I think this is a very bad idea. Flash navigation elements are not good practice on the web, since you cannot be 100% sure your visitor has the Flash reader installed. Furthermore, search engines do not reliably scan such links for purposes of SERP on the page. Finally, anyone using a screen assistive device will not be able to use such elements. Using a graphic prepared in FW or PS, on the other hand, will not have those disadvantages and will be 100% reliable/usable for all of those categories (assuming you have properly provided a descriptive alt attribute for the image).
How do I make it link to another page where the larger product photo is located in Dreamweaver?????????????/
You cannot do this in HTML - it would have to be done in the Flash Actionscript at the time that you make the button. That's yet another reason why using Flash navigation elements is a bad idea....

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

How to export swf file in different versions of flash like (6,7,8,9) ?

Hi,
    System Specification :
    -XP with SP3
    -MS Office 2003
    -Flash V.10
    -Xcelsius Engage 2008 ( 5.3.0.0 )
    -Xcelsius Build number 12,3,0,670
   When I export output in swf format then xcelsius generating swf file of version 9. I want to export swf file in different versions of flash like (6,7,8,9) . I tried to install older versions of flash to do this but I am not able to open xcelsius in older version. I am getting error saying 'Install latest flash player'.
Is there any way to export swf files in different versions?
Is this build is compatible with only flash 10?
Thanks,
Ganesh

Xcelsius only support Flash version from 9 on. There is no way to export to 6,7 or 8.

How to get the Purchase Order sample form to have 2 detail regions?

I would like to use the "Purchase Order" sample form as the base, and add one more "detail header" and "detail" subform to it.
So I copy and paste the "detail header" + "detail" subforms, and position them right beneath the first "detail" subform.
It works to certain extend. I can click the "Add Item" button(s), and it would expand the respective "detail" region.
The problem comes when things get expanded to the 2nd page.
Say, I first add 5 rows to the 2nd "detail" region, everything still fits in one page;
then I keep adding rows to the 1st "detail" region, and it begins to expand to the 2nd page....
everything in the first "detail" region can still fit in the first page,
the rows in the 2nd "detail" region should get pushed to the 2nd page...
but when I look at the 2nd page of the form, the "detail header" on the 2nd page is that of the "FIRST" detail header, not the 2nd detail header!!
So, when you look at the entire form, you have
First Detail Header
some First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some detail rows (can't tell if they belong to the first detail region or 2nd detail region)
This obviously is not right.
So, how do I fix it such that the Detail Header on the 2nd page is that of the 2nd Detail header???

an update:
I have found out that the detail rows on the 2nd page are all that of the 2nd detail region.
so, it's like this:
when you look at the entire form, you have
First Detail Header
all the First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some 2nd detail rows

How to export customer/vendor aging detailed transactions to excel ?

hi all,
How to export customer/vendor aging detailed transactions
to MS-Excel ?
After entering all selection creterias,report
opens up with consolidated aging details
for each customer,we need to double click a
customer to get detailed break up of all transactions,
Is it possible to export to ms excel for detailed transations break up of all customers/vendors ?
In standard it is only possible to export detailed
transactions break up for a customer/vendor ?
Jeyakanthan

Thanks,
Eventhogh we don't need detailed aging report in print,
we converted print preview into text file
and then converted to excel format.
Jeyakanthan

Keep Together when we have two detail sections

Post Author: achaithanya
CA Forum: General
Hai,
I have two Detail Sections and when you look at the report data is split and is displayed in two pages. It should be together. If we have single section then we use Keep Together option. I have tried with this option also.
1st page end
AAAA
BBBB
aaaa
bbbbb
2nd page start
cccc
dddd
Data should not split as above and it should displayed in any one of those pages.
Thanks in advance,
Regards,
Chaithanya.

Post Author: [email protected]
CA Forum: General
keep together is good for that section only. unless there is a parent section that you could turn keep together on, i don't know of a way

Exported SWFs have reduced detail

Similar Messages

Maybe you are looking for