Exported Video is messed up.. advice please!

I am trying to export a short 40 second sequence out of final cut. It consists of footage that was shot through my Sony HDR HC3 and capture through firewire. 20 seconds of that clip was then edited using Adobe After Effects.
When i play in the timeline the video appears fine... but when exported.. transition happens at the wrong time, sound effects are out of sync with the video, and during 1 clip it gets very choppy/blocky (i checked to see if that was QT freezing up.. it wasn't)..
Details: Fade in.. Title.. Fade Out.. Fade in.. short test clip rendered out of After Effects..Transition.. an improved clip rendered out of AfterEffects.. Fade Out ... Sound Effect (lightsaber ignite). Clip shot with camera rendered out of After Effects w/ varying sound effects underneath it (some mp3, 1 aiff, 1 wav) END
To add a little more: When i exported the footage clip out of After Effects and played from the finder, it was fine.. but when imported to Final Cut Pro, the clip was a good 3-4 seconds shorter! So i imported it to imovie (worked fine).. and reexported it then readded to FCP and it needed to be rendered but it was ok..
System. Mac OSx 10.5.5. Alum iMac Intel 2.4 ghz intel. 3 gb ram. 500 gb ext fw 800 drive for FCP scratch disk.
Thank you for any help!!

I tried rendering out of the render queue this time and when i play the video out of finder using QT it is squashed (widescreen scrunched to fullscreen).. then when i place it in FCP.. the video becomes widescreen again, but it keeps freezing on playback in the timeline.

Similar Messages

Lost my export settings for Compressor. Advice please.

I just transferred all of my files to a new MBP from my iMac. But, I forgot to save my Compressor settings that I always used. I would really appreciate some advice. I shoot in 720p 60 then edit in a 29.97 timeline. I then export ProRes LT to take to Compressor. First, what would be a good Compressor template to use? Broadband High? Broadband Low? WiFi High? Should I change data rate? Audio settings? I am just looking for some simple parameters here.I am using Video Press to stream my content and it is working very well. But I lost the settings that I was using for streaming. Any help would be great.
Happy Holidays to all.
Cheers.
Tom

Hi tom, your previous Compressor v4 settings are probably in your previous home directory at
~/library/application Support/Compressor/Settings
If you still have your previous Timemachine sparsebundle around you can simply restore this folder to your current ~/library/application Support/Compressor/Settings and you will have all your old settings back
I've assumed that you have an old instance of your application support library around
If not I don't know of any way to reinstate your compressor settings without another instance without manually setting them up again
Please post your results for others to utilise. :)
Happy new year!
Warwick

Exporting WITHOUT the Letterboxing - any advice please?

I'm shooting on a Sony Z1 using 'Squeeze' mode but when I export to a QuickTime from FCP I still have the letterboxing within picture.
Is there anyway I can avoid the letterboxing to produce and export a full video frame for web broadcast without cropping the picture?
Thanks
Simone

Yes, you can scale your HDV or DV to a smaller size using advanced setting in Compressor. Not sure why you are working with a down convert in Squeeze. I would work in the best quality (HDV) for as long as I could (keeping in mind the limits of HDV Long GOP) and then export to Compressor using a uncompressed codec and using a custom setting to the size a web file you want. Test small files and keep plenty of notes for each then burn to DVD if this is where you are going and see what works for you.
Good Luck
Z1

LR4 no exported video change-help please

Exporting from LR4 video there is no change to adjusted clip. I went through the clips from the the 5D mark II before I had LR4 in Quicktime and trimed and saved them. Made adjustments to the jpeg still. and synced the jpeg preset and exported. Video exported with no change. Using 2.7 GHz Intel Corei5 10.6.8 12 GB of ram. Please help or guide me to a disscussion that I haven't been able to find among the many.

http://help.adobe.com/en_US/lightroom/using/WS75C39DDC-B701-4840-A703-0755A5C04878.html#WS 2bacbdf8d487e582-424a4e56134157e47bf-8000
Original :Exports the video in the same format, and at the same speed, as the original clip.
under this Adobe help link exporting video - it doesn't say anything about not exporting the file without changes. Why would I want to export a copy of the video without changes made in LR?
When exporting as H264 I see a change. S0 "Original" means just what it says" and "Of course - same as re-saving a JPEG" isn't answering the question of exporting the video as original not exporting with lightroom changes.
Is the DPX format lossless to the "original" or is the export choice of save as Original not functioning correctly, saving the files with the same format, and same speed as the original with LR adjustment?
It looks like the DPX format is according to this link
http://www.digitalpreservation.gov/formats/fdd/fdd000178.shtml
under the Quality and Functionality Factors subsection isn' t for use in desktop PC applications. It seems that DPX is for archieveing much like the DNG or so it would seem in what I have found so far.
All in all is the DPX format what should be used for lossless work flow or is the save as Original not functioning the way that it should?

Hello! help me, please! while exporting video i faced an Unknown error compiling movie

while exporting video i faced an Unknown error compiling movie. the problen somewhere in the biginning of the video. the sistem automatically chooses user's type of export and cuts the beginning(

Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

New System Build feedback/advice, please...

Time to build a new WorkStation. My motivation for upgrading is that I have been using a mediocore laptop (i7m, 8gb, 250gb ) from my work as my home system for the last 2 years, I am starting to get more freelance coming in and need a good desktop.
I am not so sure about my processor, mother board and video card choice. I am more interested in app usability than absolute throughput and want to maximise my dollar investment.
Purchase date: this week
Budget: I'd like to stay close to $1000-1300, but can spend more for significant performance gains. As I do more research, my inclinations are trending higher.
System Usage: My primary uses will include photo editing with Lightroom and Photoshop, 3D graphics using 3D studio Max, Maya and Mud Box, HD video editing using Premiere and After Affects and Web Design. I will also use it as an HD media player and hifi audio is important. Maximizing cs6 performance in premiere & pShop is my main target. I am focused mainly on user experience while running these apps. If I need to encode hrs of video or crank out frames in max/maya, I can do it at work. I seldom run games.
Monitors: I'm running two Dell U2410's IPS, calibrated w\Color Munki, one portrait one lanscape.
Parts to Upgrade: Full system build
O/S : Win7 Ultimate, I might play with Ubuntu/Virtualization
Vendor: Newegg unless I can save big $$ else where. I like B&H.
It needs to be an Intel machine & I have chosen lga 2011 becuase I'll eventually go to 64gb. I'll do some modest overclocking.
Any advice is appreciated. Thank you for your expertise.
Processor:
Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820
$299 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115229
or
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
$569 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
Do you have any feeling about how much I'll gain by going to the 6 core cpu over the 4 core? Remember, for me usability in the cs6 apps is more important than marginal gains in throughput.
Mobo:
MSI X79A-GD45 (8D) LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
$218 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130635
or
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
$240 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157289
or
MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS
$380
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130626
I would really appreciate any feedback on mobos in regards to maximizing cs6...7...8 performance, system logiveity, and performance. Is it worth it to go for a higer end mobo? If so which one. I like the msi's based on eventually ug to 128 gb, but are they money well spent? Any probs w/these mobo's?
Memory:
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL10Q-32GBXL
$130
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231490
Hard Drive:
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
$160
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164
Video:
GIGABYTE GV-N65TOC-1GI GeForce GTX 650 Ti 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card
$160 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16814125447
or
MSI N660 Ti PE 2GD5/OC GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Item#: N82E16814127696
$300
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127696
I am still a little unsure of the real world differnces that I'll realize by doubling my video card expense, advice please?
Optical Drive:
LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-Ray Burner with SW, 3D Play Back - BH14NS40
$70
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
Case:
COOLER MASTER HAF 912 RC-912-KKN1 Black SECC/ ABS Plastic ATX Mid Tower Computer Case
$60
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119233
Power Supply:
FX Core Edition PRO650W (P1-650S-NLB9) 650W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply
$90
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207014
Total $1190
or $1760
I have picked the MSI motherboard due to its support for 128gb ram, superior audio and other high end features. The AS Rock for its rep for solid value/performance. Opinions?
Finally, I would like some advice on video cards. I prefer nVidia to ATI, but I'm not sure which chip to go for. The six fifties are cheaper, but the 660 ti provides more CUDA cores.

Alex,
I sure wish you would quick picking fights with lots of knowledgeable people just trying to help people build good PCs for running Adobe Premiere. (I am stating that based on not just this thread, but rather the strong challenges you seem to bring to about half of the threads that you've chosen to participate in).
I was the original poster to suggest that Neal select a larger case. Next Harm agreed and cited 6 points which I would agree with regarding why a larger box is better for a video editing rig.
What are the typical goals for someone wanting a video editing PC? I would expect that most users want:
- robust, runs and never fails
- has incredible power; face it, video editing with AVCHD is one of the most taxing applications a PC can face today
- quiet; who wants to be doing creative work with any server room like wind noise
Now let me be specific where you are simply WRONG WRONG WRONG:
You stated: "Back pressure increases in larger spaces due to natural impedance of airflow (much like with electricity traveling over distance)"
Fact: Exactly the opposite; Back pressure decreases in larger spaces due to more room for the air to flow (much like thicker copper passes electricity with less resistance than a thin wire)
Your stated: "Open non-compartmentalized spaces are a recipe for hot spots - areas of turbulence with higher temperatures." and then cited a server room article talking about cooling air taking the path of least resistance -- going under the floor in a server room, instead of through rack mounted servers.
Fact: Lots of open space for large, slow moving fans to keep a video editing box cool is a great way to go
You stated: "Full towers - in themselves - are worse for cooling"
Fact: That is one crazy indefensible statement!
I seriously doubt that you fully comprehend the differences and importance of thermal conductivity, heat capacity, conduction, convection, and radiation for you to make the statements that you have so far and these are the staples for discussing how heat transfer takes place.
Note to other readers... There are lots of ways to cool components including cpus, hard drives, gpus and memory. I suspect that the noise levels brought by servers and some gamers would be totally offensive to the ambient noise level that you want in the room with you for video editing. Therefore we are left with just a few quiet alternatives: 1) lots of volume at low velocity (large cases, large fans, slow rpm), 2) liquid cooling, and 3) Cases with doors or baffles to keep the sound from a noisier solution from getting back to your ears.
Regards,
Jim

After updating to PP CC 7.2.1 exported video badly scrambled

I have had no issue exporting a 7 minute film using the Vimeo 1080 codec on PP CC Version 7.0.
I recently updated to the latest, 7.2.1.   I then exported the same exact timeilne, using the same exact Vimeo Codec. After serveral attempts, the last 3 minutes of the exported video are badly scrambled. No audio issue, just video.
I then tried media exporting * Only the troublesome spot from minute 6 to minute 7.   This clip exported perfectly.   This problem only seems to happen when I media export the full 7 minute sequence.
Please find attached images for reference.

Hi Mark,
I'd be glad to provide you with my settings but I think the main issue here is that I had no encoding problems whatsoever with the exact same timeline and encoding settings in version 7.    I literally just updated via Creative Cloud and re-opened my existing project.
In any case, please find screengrab for my settings.   I use the Arri timeline as indidcated by tech support back in version CS5.5 and moving forward. I have also tried the DSLR sequence; same result
Checking max render and previews on/off makes no difference.
The film is scrambled consistently from frame # 8112 to the end of the film.   I tried encoding on two different computers; same result.
If there was an issue with my settings or clips, I would not have gotten great results with the 7.0 encoder.

Cannot export video's from iphoto '08

I want to export videos in mp4 format that were imported from my camera into iphoto '08.
The first problem is that "export..." won't work. I selected the 7 videos, then "Export...". I selected file format. However, it doesn't recognize that anything has been selected and grey's out the "Export" button.
So, I came up with an alternate plan...burn them to a cd. I selected the same 7 videos and then "burn" section from the "share" menu. It prompts me for a cd, which I inserted. Then, I see a report that these 7 video's take 90MB of space...I hit continue and the cd is burned. However, when I look at the cd later(and I have done this twice now), the cd doesn't have any of the videos, but it does contain the 172 photo's that are in the same album. Again, I did this twice. I selected the album, then typed mp4 into the search window, then selected the 7 resulting videos. And the program was telling me it had 7 photos.
I am VERY frustrated that I have found 2 bugs in this software. I used to be able to export video's all day long. Not good.
Since I am complaining now, the only reason I am doing any of this is because I want to give my friends a CD with all the photos and videos from our recent trip. They have a mac...should be piece of cake. It is not, because the video's just sit in iphoto, but I can't do anything with them. I wish slide show would seemlessly integrate photo's and video in order. My Sanyo camera does this, but my Mac doesn't. I tried sending all the photo's and video's to iDVD, and it worked, but that takes hours to do all the rendering...and at the end of the day, the quality isn't as good.....
Please help.
Thanks,
Phil

Phil
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

My itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help

Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Issues with exporting video from MacBook Pro to flash drive

I cannot sucessfully transfer [export] video taken on my gopro camera, from my MacBook Pro to any flash drive and play them on other computers. For some reason the files are not playable, even with quicktime. They will not play with ANY of my video softwares such as divx or any AVCHD software on a windows computer. I need to make a presentation for a club trip in a few days! Can any one please suggest what is wrong? They play on the Mac using Flip player but not quicktime!
Oh, and I don't have issues with transfering or exporting Jpegs or other photo formats. Only video.
Message was edited by: gmob25

hmmm.. the files from GoPro are already mp4 format. The Flash is already FAT32, brand new 16gig...
I am new to Macs but have no problems with PC's. I suspect that because the files are exporting as shadowed files which won't play and are very small kb files, yet they are actually in excess of 140 mb each that it might have something to do with the iphoto software? That's where the pics and video are, they imported to there by default, not to a folder in the home folder [which is where I would have expected them to be]
By the way, the GoPro is already in mp4 format so it is easy when transferring to computers. No need to convert. I tried converting them to see what the outcome might be, and none worked! I tried every format I could find using Video converter ultimate software, which is excellent.
And the problems began when quicktime wouldnt play the file, the screen was black.

Is it possible to export video from Final Cut X to DSR-PD175 mini DV camera

Hi,
Recently i buy on 27inch iMac with Final Cut Pro X installed.
Also I buy Thunder bolt to firewire adapter & firewire cable from Apple.
Now i am abel to capture my video from DSR-PD175 mini DV camera to FCP X.
How can i export video from Final Cut X to DSR-PD175 mini DV camera?
Please advise....
Thanks & Regds
Abin Thomas K.

II'm afraid not.
Not digitally anyway. Maybe by going to a monitor that has analoh AV output to the camera.
Probably Premiere. Or old FCP7.

AME Exported Videos show transparency differently than when viewed in Premiere Pro!

This is kind of hard to explain but basically AME does not seem to treat 99% opaque as 99%...instead the exported file looks more like 90-95% opaque. If you have 2 clips (contrasting clips are easier to notice) on top of each other in Premiere and the top clip is at 99% opaque and the clip beneath it is at 100%, in Premiere you can hardly see the bottom clip, if at all. At 99%, that's how it should be. Just barely peeking through the top clip...
BUT...
If you export that clip using AME, the resulting clip will look completely different and it looks more like you had the top clip set at 90-95%. The lower clip is MUCH more visible. There is not "barely peeking through" like you see on Premiere. It appears that AME does not handle transparency well. For example if you cross dissolve two clips. It looks fine in Premiere but export it out to Bluray/DVD, etc. and all of a sudden, sometimes the beginnings and ends of the clip abruptly clip on or off as they fade into the clip. Again, it's like they go from 5% to 95% but miss out on the subtle start of 1-5% and the subtle ending of 95-99%.
There is a thread about this in the Premiere section but I figured I'd toss it here since it seems Premiere handles/shows the transparency perfectly, but the issue arises when it's exported. To really define the point see the following clip that another user posted in that thread I just mentioned. Notice how the cross dissolves abruptly start and end sometimes. I noticed this in my exported videos too because I use LOTS of cross dissolves. It's easier to notice on more contrasted clips, but I think this illustrates the issue really well.
https://vimeo.com/14536285
Again, I just edited a project that had 2 clips stacked on top of each other and I accidentally had the top clip at 99%. I didn't even notice it in Premiere. You really cannot see the bottom layer peeking through...well, barely. But it's really subtle which makes sense because the top layer is at 99%. But on my exported Bluray/DVD...holy cow, it's VERY noticable! Almost as if the top clip were at 90%, not 99 (no exaggeration).
I don't see a BUG Report for Adobe Media Encoder so I submitted a bug report in Premiere Pro.
Can any one (staff preferably) address this issue please?

Thanks for the response Todd. Is there a way to get around this GPU vs. CPU thing you mentioned? If not, is there a way to export from Premiere (to DVD/Bluray/Vimeo H.264) without using Adobe Media Encoder or export somehow so that dissolves and opacity changes are handled the same way that Premiere handles them so that the exported video doesn't look suddenly different? (I'm on a 2011 iMac with 16gb RAM and the AMD Radeon 6970M Graphics Processor) Basically, am I screwed and there's no current way having these issues with transparency that I mentioned above?
Here, by the way, is the thread I mentioned that has to do with cross dissolves. I figured it was just an issue with that specific transition until I just now did this export with a 99% opaque clip on top of another clip and the resulting export looks more like an 85-90% opaque clip.
http://forums.adobe.com/thread/898211?tstart=0
Thanks Todd!

Help a Complete Beginner Improve Quality of Exported Videos

Hello all, I'm completely new to Adobe Premiere Pro and I am experiencing lots of difficulty with the quality of my exported videos. My source material is a 720 x 480 .AVI (Note: I intend to export in a format like .WMV or .MOV) that was recorded with a screen recorder called CamStudio. The original material looks incredibly nice in Windows Media Player but the minute I import it into Premiere Pro and export it, it looks awful. Exporting the same video through Windows Movie Maker results in incredibly better quality. I'm pretty sure it has something to do with both the project presets and my export presets. I just don't know the kind of numbers and settings I need to input in order to fix the quality. Could someone be kind enough to break down all the numbers and settings and explain to me what to do? I have looked through several guides but it just doesn't seem to be working out for me. Maybe all I need is a human touch to the advice...thanks in advance.

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How to enable exporting video. newbie

Hi all, I know this is elementary but have pity on me as I'm still a newbie. I have a sequence with a few audio tracks onto a video track. I want to File/export to a vimeo video file. When I pick export, it only allows me to export the audio. I *know* its some setting I hit but not sure where. Also, this is what I have for my video and audio tracks and I have a feeling it's because Video 1 doesn't have the small tab at the beginning clicked as the Audio tab has "A1".
I click on that small block but cannot get it selected.
please advise ! thanks!

Jim, thanks for taking the time to answer. My confusion came from the fact that I could not click on the 'export video' box. however, once I changed the file format to something other than "export audio" I was able to set it to vimeo hd.
thank you!

Exported Video is messed up.. advice please!

Similar Messages

Maybe you are looking for