Exported video is missing the last 8 mins

Well this is odd. I just spent the last 8 hours waiting for my sequence to export. So I have a 38-min sequence, 1080p exported to MPEG format to match sequence settings. The problem is when it's finally done, the video is only 30 mins long, so it's missing the last 8 mins. When I was monitoring the export status, it was moving along during the last 8 mins of the sequence so I'm not sure where it went wrong. The drive I saved it to has plenty of free space, and I also suspected maybe my default player (Windows Media) has a limit on videos, but I've exported other files before that were an hour long. Any thoughts? :/

Yeah I made sure "Entire Sequence" was selected and the work area bar was at the end. Where do I check to see if there's been an Out Point set for the Timeline?
At this point I am starting to suspect it has something to do with limits on my Media Player. This is the first time I've exported a file of this specific format (1080p Movie Clip on Windows Media Player) at this size. I tried it a second time (both times with Media Encoder) with all the same settings and the same thing happened: The export bar was showing progress thru the whole sequence but final file still is cut off at exactly 30:04 which leaves it at 3.99GB. I wonder if there's a file size cap or something. I'm gonna give it a third go with H.264 Blu-ray instead of MPEG (so it'll be an MP4 instead of a Movie Clip) and see if I have any better luck, unless some of you have more suggestions I didn't check the estimated file size before but now it's telling me 5.5GB :/

Similar Messages

I want to boot my new mini mac in OX 10.6.8 how can i do it with the last mini mac 2,3 Gh i7 ?

i want to boot my new mini mac in OX 10.6.8 how can i do it with the last mini mac 2,3 Gh i7 ?

Stef207 wrote:
i want to boot my new mini mac in OX 10.6.8 how can i do it with the last mini mac 2,3 Gh i7 ?
Those specifications are not for the "last" mac mini, but for the mid-2011 Mac Mini: Macmini5,2.
While that model came with Lion and could not be downgraded to Snow Leopard out of the box, look for the work done by newfoundglory https://discussions.apple.com/people/newfoundglory in this thread on how to accomplish an install of Snow Leopard that will allow that model of Mac Mini to boot into Snow Leopard, if it is that important to you:
https://discussions.apple.com/thread/3209335?start=0&tstart=0

Exporting video holds on the second 'clip', but audio exports correctly

i'm exporting a project from imovie, i have a number of clips in there (which was originally a single video, but split up) and an audio track. when i first exported it as 'web', it worked fine, but when i tried to increase the quality settings via exporting to quicktime, it exports video up until the end of the first clip, and then just holds on that frame until the end of the video. the length is correct, and the audio exports correctly, but the video is just still.
any thoughts?

EmmaBean
What version of Premiere Elements and on what computer operating system is it running? Have you created the narration in Premiere Elements
using the Narration Tool? Do you have the problem in the export if you move the narration clip to one of the numbered Audio Tracks before export?
Are you using the SmartFix feature in this project? If so, have you checked your background foreground settings?
But, before that, is the sound on all the audio tracks OK when evaluated in the Edit area? Is the sound a problem only in the export?
If you are having sound problems in the Edit area before export, are you adjusting the volume while viewing the Audio Meters
typically found under Window Menu/Audio Meters.
Let us start here and then decide what next.
Any questions, please do not hesitate to ask.
Thank you.
ATR

Any way to export videos and preserve the original creation date?

I recently shot video using an NEX-5N and AVCHD as the format. Since Aperture cannot playback this format, I converted the videos using Handbrake to mp4 (H.264), and then used A Better Finder to change the creation date of the converted file back to the same date as the original file.
Importing this converted file into Aperture works great, and the imported file shows the correct metadata of the original creation date, not the date of the conversion.
But when exporting this file from Aperture, it seems like Aperture does not embed the date as metadata, and thus the only date associated with the exported video is the file-system date attached to the file, which will of course be the date of the export.
I assume this problem applies to ANY video imported into Aperture, not just those that have been converted.
Does anyone have a method for exporting video and having the original creation date remain? This is obviously a problem when exporting videos one-by-one, but would be a bigger problem if I ever wanted to export my entire video library from Aperture into another program...all the video files would have the same date!
Any feedback would be greatly appreciated!

EXIF data and video files is even more of a gray area then EXIF data and stills.
I don't do much video in Aperture so I'll take your word for it that the data isn;t imbedded into the file. In that case the best I can see is to create a custom export preset and include the Image Date in the filename. Not great but you at least have the data and you might be able to have a script use the date from the filename and somehow add it back into the file.

Exported video color not the same as canvas

When I export my project in Motion 5.1 using the default setting for Render: Color + Alpha, Premultiply alpha checked, and the rest of the setting set for "Use canvas setting" and the co-dec Pro Res 422 (HQ), the colors I see on the canvas come out as wash out looking in the exported video. Deep reds come out as light pink. I tried setting the project background (black) as solid instead of transparent thinking that that was the issue but there was no difference. I tried different co-decs and settings in the options before export without any luck. What am I missing here?
Thanks in advance for any help in this matter.

Thank you for your reply. I set to Color only and unchecked premultiply alpha and exported with the same results: Color wash out.
I used the default Canvas settings when I created the project from a .psd file supplied to me from the designer so what would be the "properly" set Canvas setting? Normally when I export I just use the "Use canvas setting" for all of the parameters in the Render tab in Export.
I use QuickTime for viewing the exports. Please let me know any more specific info you might need to help you answer this question.
Thank you

Exported video, issues with the PAT/PMT

We are trying to export video for use on a cable TV system. When I try to bring the video into the system, it fails with the follwing error.....
Import Failed: (FAIL: Unable to find a valid PAT, PMT, or PID described in the PAT/PMT)
We have tried to export the video as an .mpg, and .avi, and a .ts file. I am not sure if this is a Codec issue or if there is a setting htat is being missed when we are exporting the file.
Has anyone had an issue like this and if so what was the solution?
Thank you in advance for your time.

I have no idea what those parameters are, but I'm pretty sure there are no user setting in any Adobe software to control them.

Home Video Option Missing in Ipad Mini

Hi,
So I've had my ipad mini for almost 2 years and it has worked brilliantly until lately.
I've been uploading videos via itunes to my ipad and it shows up under Videos -> Home Videos.
So, most of the time I can just add new videos in and have no issues but lately I keep having this issue.
I will drag some videos from itunes into ipad but when i pop into my ipad section, it shows that the videos are not sync'ed in.
Then i will click sync and the next thing i know is, the memory bar at the bottom would indicate e.g. from initially 9GB of free space to 20GB of free space.
When I go to my physical ipad to access the videos, the "Home Video" option isn't even there. But the videos on itunes, on the ipad section still indicates they are there.
I've tried sync'ing again.
I've tried deleting all the videos and drag them back in and sync'ing but it doesn't work. The "Home Video" just doesn't come back.
My only solution so far has been to restore Ipad. Which literally erases all my data and sets it back to a completely new Ipad.
Depending on time and date of my backup sometimes restoring to backup date may or may not work.
Any idea what's the problem and how i can resolve this?
Help is very, very much appreciated.
Thank you.

Hi Alfred, very curious update.
As I have said I have some home movies stored under Movies >Home Videos and yesterday I was talking with my duaghter-in-law about whether it would be possible to share this with her Ipad but couldn't come up with anyway to do that. I looked at Dropbox and Instashare but they don't, as far as I can see, allow me to access my home videos, they only seem to work with camera roll and purchased movies.
Anyway, this morning I was messing about with the Ipad Movies>Home Videos page nd by chance I touched the heading where my original 4 videos are displayed and suddenly the USA video appeared (nearly fell off my chair) and it worked OK. The date is shown as 23rd March 2014.
Back stepped and tried it a couple of times and it was OK. It would seem that the Ipad has stored the original 4 videos on one page and the USA one on another. The original 4 don't show any video content i.e the opening screen just a grayed box with a move film icon and the title whereas the USA video on the second page shows the opening screen shot.
It isn't possible to drag from one page to another I have to click the Home Videos title at the top of the page to move from one set to another.
It's great news I have my video after all but any clues as to what's happening? I would have thought it would fill the first page before going to a second. Is the clue perhaps in the way one set don't have the opening screen and the USA one does?
Also, any suggestions as to how I can share these with my daughter-in-law?

I am missing the last 4 years of photos?

Today i opened iPhoto and i am missing about the last 4 years of photos i don't know where they went.. My screen saver pulls from a recent wedding folder and that works correctly so i know they are on here somewhere..

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see in the iPhoto window when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type/model of Mac?
how much free space on your boot drive?

TS1967 I followed all the steps in this and it mostly worked, the problem was the library is missing the last 3 and a half months of music adds and ratings. Is there any way to get them back?

Seriously this kind of *****. I have lots of music and freaked when it was all gone and I'm still freaking that I have to find the last 3 and a half months of music and rate it all over again. What can I do?
When I plugged my iPod in it said there was songs on the iPod not in the library and I clicked the option to add them to my library but it didn't seem to work.

check out this post by Zevoneer.
also, there are PhoneView and iRip.
edit: and start backing up !! you might want to bookmark this article for future reference: The Complete Guide to Backing Up your iTunes Library

Is it possible to EXPORT video films from the iPod to iTunes ?

EXPORTING FILES FROM IPOD TO ITUNES
Obviously, I know how to send files from iTunes to iPod.
But is it possible to do the opposite way ?
I have video files on my iPod that got lost on my hard drive.
I'd like to save them back to the hard drive (and import them back into iTunes).
Anyone out there knows if this is possible ?
iPod 60Go (1.1.2) / iTunes (6.0.5) Mac OS X (10.4.7)

There are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. One that I recall does videos as well is iPodCopy. Have a look at the web pages and documentation for it: iPodCopy

Can't zoom on video mode on the iPad mini running IOS 7

Hi! i was playing with my iPad mini's camera app because of boredom, and i notice that if you switch to video on the default camera app there is no zoom... the virtual zoom? doesn't work, but on beta phase it was working fine... but now i'm running the official now it won't work :3 can anyone help me?
iPad mini 32GB Black
Wifi only
IOS 7.0.2
Not Jailbroken

I have never been able to zoom in or out in video camera mode on any iOS device I've ever owned.
I would like to know, however, what Apple did with the zoom feature while taking still photos. Doesn't seem to exist on my new Mini, and I did try pinching. Seems lately Apple is in the habit of adding new features AT THE EXPENSE of old features that just made sense. That is why I no longer do upgrades when they become available, on the devices, apps, or in iTunes. I'm a Luddite, and I'm sick of "progress with a price"!

FaceTime with logitec video camera causes the mac mini t. Face if

Each time I try to run FaceTime on my mac mini with a logitec USB video camera ( mac version) it causes a lock up and requires a full reboot.

It sounds like it is mistaking the camera for a DVD disk. So my best follow-up question is to ask:
1. Who is the manufaturer of your camera
2. What is the model number of this camera.
What happens when you quit DVD player. Does iMovie still fail?

Can't Export Video Files to the Desktop

Since upgrading to Leopard, I am not able to open .mov and .mp4 files exported out of iMovie 06 and MPEG StreamClip to the desktop. The error message complains about a lack of disk space or improper permissions.
An export to an external drive worked, and files will burn to a DVD.
Any ideas?

HI jboppre,
Welcome to the Sony Community!
The lock symbol on the videos could mean that the videos themselves are protected or the memory card you're using is on locked position, thus preventing you to export/transfer your files to a computer,
To unprotect the files, please click on this link. And to unlock the Memory card, slide the lock lever up or unlock position.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

Why would my tabs be missing the favicon/mini-icon?

Since yesterday for some reason the tiny icon has disappeared from my tabs. That is the little icon that usually sits to the left of a tab's 'title'. I'm not sure why it's done this, I recently installed a script on Greasemonkey and another add-on but I didn't actually have any problems and the icon was still around even after using both add-ons.
The only thing I can think of is that late last night I happened to run a scan using iobit's Advanced System Care and that was when the icons disappeared. BUT! I've since restarted firefox many times since then and the icons are still missing with only two exceptions: 1) The Firefox logo that appears when you're on any mozilla page; 2) an icon that belongs on a fanfiction site; no other websites appear to be showing their icon and instead simply have as a square border of a dashed line. (I've included a <b>screenshot</b> below!)
Please, is there anyway to fix this?

You can check the value of the browser.chrome.* pref(s) on the <b>about:config</b> page to see if they still have the default value true.
*browser.chrome.favicons
*browser.chrome.site_icons
If either appears bold (i.e. user set) then double-click the line to toggle its value.
*http://kb.mozillazine.org/about:config

Exported video never fills the screen

I am creating a video from still photos, youtube and iPhone videos all mixed together.
When I export the video, the output never fills the screen.
I have specidfied H.264, and HD1080i for the output.
Did I mention that I am a newbee, and just started using Premeire Pro CC two weeks ago?
Thanks for any help you may provide.
Larry...

Hi Larry,
Since you're mixing 3 different sizes of video, the desired output DOES play an important role from the start and will help determine what Sequence Setting you want to start with.
You have 720p HD videos, SD videos, and "less than SD" video. I would recommend against exporting as 1080 HD unless absolutely necessary for some reason, since you would be "blowing up" ALL of the formats, and that loses quality. The 720p would look ok, but not the other ones!
So at most, I would edit in a 720p30 sequence for 720p delivery. In the Premiere Preferences, there is a checkbox for "Scale to Frame Size" - check that and then any clips that you import will automatically fill the frame you're working in. For clips imported prior to that change, right-click the clip in the sequence and check "Scale to Frame" manually per clip.
Another example, if you wanted to export to DVD which is 720x480, then you would edit as 720x480 so that the SD clip would be edited natively and the smaller clip would upsized a minimum amount. The HD clips will downscale fine. That would yield best results for SD delivery, rather than taking all clips UP to 720p or 1080p, then back down to SD again. Following the workflow?
Thank you
Jeff Pulera
Safe Harbor Computers

Exported video is missing the last 8 mins

Similar Messages

Maybe you are looking for