Exported video's frames back-and-forth quickly

When I played my video in the studio playback, it was perfect. But when I exported it, when I played it, its audio was perfect, but the frames go back-and-forth very quickly. Can anyone help me?

We need to know a lot more if we're going to help you.
What version of Premiere Pro? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Tell us about your computer hardware. Are you using Mercury Playback Engine GPU Acceleration?

Similar Messages

Compressor frame count jumping back and forth

Hi guys,
I've never noticed this before, until last night when compressing a 25-minute film in Compressor at 'DVD-90 minutes, high-quality'. What in the past on this film might take an hour or so, last night took about 14 hours (i.e. all evening and through the night).
Compressor was advancing through the frame count, but then would return to an earlier frame, then jump forward through the frames again, then jump back to 10 or so frames earlier, advance forward, go back, etc. It took ages for it to get through a dozen frames or so.
It seems to me in the past when I observed Compressor, it works its way consecutively through frames, advancing forward one frame at a time.
I guess Compressor was reinterpreting data from an earlier frame, but is this normal? My film only has one of two video layers, up to 8 audio layers, some imported Motion QT files, and a very large PICT image file (scrolling end credits).
When examing the frame count where Compressor seemed to get bogged down, it appears it was towards the end of the 25-min. film (around the 42,000 mark). It seemed to be stuck there, jumping back and forth all night. Must have been when it was trying to digest the PICT end credits... Eventually it did complete the task and the export was OK.
If Compressor is having problems with the PICT (?), perhaps I'll test this out by putting my end credits on a seperate FCP sequence, export them as a QT file, then re-import that back into my film and see if Compressor is happier...
Any thoughts?

Ongoing changes? What do you mean exactly? Anytime you add filters to a clip and render you are slightly lowering the quality...slightly. But exporting, expecially via Compressor, will add even more. How many changes are you making?
Shane

Zoom while video recording (bug) - Video flickers back and forth on playback

Using iphone 5s iOS 7.0.2
If i zoom slowly during video recording, when playback the video, during the period i zoomed in or out, it just flickers back and forth (in and out). which ruins all the video.

I just tried it on my iPhone. Same specs. No issues. I'm assuming you're doing playback on your phone?
- JC

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly it and switch back and forth from video to still pics and while I may have filmed four videos sometimes Quicktime tells me that one of them can't be pl

Why does Quicktime tell me it can't play certain videos created with my Phantom 2 v3 drone ? I fly the drone and switch back and forth from video to still pics and while I may have filmed four videos , sometimes Quicktime tells me that one of them can't be played . Checking the info shows that each of the unplayed videos was saved in the same mp4 format as the playable ones yet some of my most important videos won't play . It's getting very frustrating .

first; I use Perian, that helps even though it is no longer supported, (must have for avi files)
the apple-cores at apple have gotten very sloppy -- quicktime is a bit finicky and flakey.
example,   occasionally (when copy file from quad's card to hard drive) the avi will show up as a 'mov' file and qt plays it no problem and no conversion.
but that is very occasionally, most of the time qt won't convert the file,   -- iMovie won't open an avi without Perian installed , I don't know how that effects qt.
qt 7"pro" is no good either, (qt 10 does everything it does and for NOT the extra $35)
I have gone to VLC and MPlayerX for direct playback for drones and cameras.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

Screen vibrates when booting up. It fluctuates very fast between Safari and Microsoft Messenger. Back and forth .... flicking away .... back and forth, very, very, quickly. And then when its completely finished booting, everything is OK.

I sign in and when Safari opens, whilst Microsoft Messenger is downloading, the monitor screen vibrates between Safari and Messenger at a very, very, fast pace. Back and forth, back and forth, alternating between the two. When the booting process is completed the computer is fine. Everything is OK. Anyone know what is causing this, and what to do about it?

YES .... but they have always been set to open at login. I must admit that if Messenger isn't set to open at login this doesn't happen. But even though Safari opens at login, the opening page in Safari doesn't open; I have to click on Safari again, (when I am reminded after the computer has booted-up), because the monitor screen is just blank! Then after a click on the Safari icon the screen fills up in a second. Gees, what have I unintentionally done?

Best way to make a short movie that can play back and forth smooth?

Hi!
I have a short .flv clip (video) of a shoe rotating 360 degrees.
The clip is less then 4 seconds and about 320kb in size and I'm using flash CS4.
I'm trying to build some sort of a player that lets the user scrub through the movie (back and forth).
The player is also supposed to be able to play the clip back or forth at a speed selected by the user.
I have read kglad's reply about "How to play backwards flv imported in timeline on flash cs3?", and the code works perfect, except that the video is not playing smooth when played backwards. I guess when playing normal, the next frames are by default buffered, but when playing backwards they are not...
Which is the best way of doing this?.
Maybe it has already been done? Has anyone heard about something similar?
Thanks in advance!

Hi!
Please find the file attached. I changed the file extension from .fla to .eps.
(I also added one with the extension .mpg)
Basically I just want to be able to rotate the shoe in either direction,
but then I also would like the user to be able to "spin" it.
Meaning that when the user turns the shoe around, the speed is recorded,
and when he releases the mousebutton, the shoe will continue to rotate at that speed.
Do you think it could work using video? Or do I have to use stillimages instead?
Your script worked, but the film doesn't playback smoothly..
Thanks in advance!

HELP! How can I switch back and forth from LT to FCE to sync sound?

I'm using LT 1.2.1 and FCE 3.0. I haven't used it for 2 or 3 years, but people in this forum have been amazing at helping me get an old project working again.
Here's my latest question. I swore back then there was a way to move back and forth between LT and FCP so I wouldn't have to render my LT files each time I wanted to drop it into FCP.
Here's what I'm doing:
I've created an entire "movie" in LT that now needs to be fine-tuned to be sync'd up with a professional voiceover, which is why I'm using FCP. The only way I can figure out how to make sure the LT file is going to be sync'd with the audio is to render the movie in LT, import it into FCE, see if the audio works with it, if not, I go back to LT, move things around, then re-render, import into FCE, and hope it all sync's.
I think there was an easier way to go back and forth between the two.
Along the same lines, is there a way to get the audio from FCE (or some sort of a representation) into LT? The LT file must be adapted to the audio, and if I could "see" the audio in LT, it would be infinitely easier.
Thanks!
Bob

LiveType does not support any kind of audio, Bob.
Go through your movie in the FC Timeline and set markers at the relevant cue points by pressing M.
Pressing M a second time whilst sitting on the marker, will open a dialog where you can type a suitable description in the name field. Keep the description short -it might help to take notes too.
Export a copy of the movie (including markers) and bring it into LiveType with File > Place background Movie. The markers will show up at the top of the LT timeline, with their descriptions.
Delete the background from LiveType when you have everything lined up. Save your LT project file and import it into FCE. You can use the project file exactly like a video clip.
If you need to go back to LiveType for changes, right click the LT file in FCE's Timeline. Choose "Open in Editor". This will open the project in LT. Make changes, save the file and it will update in FCE.
Message was edited by: Nick Holmes

IPhone: Using embedded QT movies that either Loop or Loop Back and Forth

Hi to everyone,
I'm working on a very simple iPhone app:
it has several buttons that launch different QuickTime movies embedded in the application, that will either Loop or Loop Back and Forth.
The desired looping behaviour is already set within QuickTime itself (those settings are available in QuickTime's View menu).
So far it doesn't seem to work, as the iPhone's SDK doesn't seem to recognize these QuickTime settings of Loop or Loop Back and Forth.
I've been trying to find advanced documentation on the matter, with no luck.
Does anyone knows if it's possible to create an iPhone application that has embedded QuickTime movies that either Loop or Loop Back and Forth?
If it is possible to do so, can you please post some code (or links) explaining how to proceed?
If the feature is not currently supported, does anyone knows if it will eventually be supported by Apple (maybe in a future SDK revision)?
While I don't know the entire context the SDK engineering team has to contend with, it seems to me it should be rather simple for Apple's iPhone SDK to simply accept the settings already put in place inside a QuickTime movie.
Many thanks in advance for any feedback on this!

Well, my programmers have come back to me and the news is not good.
The QTMovieLoopsAttribute is not supported in the SDK's QT Kit.
I'll now call it SDK's *QuickTime Kit Lite*, if you don't mind.
*QuickTime Kit Lite*, the key audio/video toolbox available for development of applications on the iPhone through the SDK, provides a single option:
a Play / Stop button.
The only other thing available (I think) is the option to hide the play/stop controller. That's it.
Apparently, there are several unofficial, private frameworks that give access to lower-level QuickTime functions and that may provide a way to actually loop videos, but chances are that an app using these unofficial frameworks would get rejected by Apple upon submission for the store.
I'm still waiting for more info and the final word from my programmers, but from the looks of it, this is going to be a show-stopper shortcoming of QT Kit Lite, as far as my project is concerned.
I'm probably going to have to fold my project and wait (hope) for an eventual upgrade to the SDK's QT Kit.
By the way, does anyone knows if there is a way to communicate with Apple and request new features for inclusion in future revisions of the SDK?
Upgrading the QuickTime Kit librairies to include the video Loop and Loop Back and Forth Attributes would be my first (and only) request.
many thanks to all!

My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out.

My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out. The sequence settings are set to
Editing Mode: DV NTSC 29.97 frames/second.
Pixel Aspect Ration: D1/DV NTSC (0.9091)
Fileds: Lower Field First
Display Format: 30fps Non-Drop-Frame Timecode
720 x480

What is the source of your video, and exactly what is inside your video?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

How do I toggle back and forth from the live site in the tutorial to the working site?

How do I toggle back and forth from the live site in the tutorial to the working site?

I think that if you scroll down the page to the third video, you will find what you're looking for.
Best regards,
Randy Nielsen
Product Integration Manager, Creative Cloud Learning
Adobe

Blue background when moving my macbook screen back and forth

When I move my screen past the 90 degree angle, at a certain point, the background on my safari windows will turn a light blue with very small striped lines. Under words or my mouse, however, the background is still white.
Thanks for any help.

It is an external HD, yes, but a "portable" HD... I have also tried just the external HD but found it very bulky and I always had to lug around the power supply and cords for the HD. Google "portable hard drive passport 500gb"... for example... that's what I use.
http://www.google.com/products/catalog?hl=en&sugexp=pfwl&tok=o-MzmA7RWsR0_HVA9BIvtg&cp=32& gs_id=2n&xhr=t&q=portable+hard+drive+passport+500gb&gs_upl=&bav=on.2,or.r_gc.r_pw.,cf.osb& biw=1176&bih=861&wrapid=tljp1327460600580060&um=1&ie=UTF-8&tbm=shop&cid=116127269428491234 13&sa=X&ei=DHEfT9G5Goeq2gWr2umRAw&sqi=2&ved=0CJgBEPICMAE#
I had originally set up my client files on my desktop... those files not only included the Web site files, but ALL related communication, content, development files (images, videos, Flash). Nothing worse than being away from home and realizing I'd forgotten to take the photo/text/video development files with me. So I just copy/pasted the ENTIRE client file on the the portable drive... which included any DW site files. Now you may have to adjust some drive names (D:, L:, J: or whatever.) but you can hot swap back and forth and always carry the current version with you to whichever computer you are on
A "portable" HD rather than just an "external"...which may need it's own power supply, means that you can hot swap the HD, just like a thumb drive.... only a heck af a lot BIGGER!
....But during testing and set up... always keep a complete backup of ALL files until you get your particular set up working.
Best wishes,
Adninjastrator

Interactive sub headings back and forth

Dear All,
I'm working on an ePub in InDesign CC and have chapter headings with sub headings under them. I would like people to be able to tap a sub-heading and jump ahead to that page with an interactive hyperlink, and I have successfully incorporated that interaction. Now I want my reader to be able to jump back to the sub-headings list so that they can choose another sub heading and jump ahead to that page, but I can't seem to do that. How can I accomplish a back and forth interaction from sub-heading list to heading and then back to sub-heading list? I've tried cross reference, but I don't think that's what I need to accomplish this task. Thanks.
Small Town Gal

Dear Ariel,
InDesign CC seems more than a little quirky in this procedure, but I was finally able to get it to work. I have created my own website with Dreamweaver and have used hyperlinks in PDFs, so I am familiar with how to use them, but for some reason they sometimes don't show up in the hyperlinks panel in InDesgn CC after they are created, or the "reset" button doesn't clear up any errors. Deleting and re-creating seemed to be the only solution for one particular link, because it kept locating the wrong link rather than the one that I wanted. I finally got it cleared out and now everything works as I planned.
Also, I am working with an ePub, not a PDF. I find the PDFs easier to work with, although I realize that both PDF and ePub can be exported from the same document, but I'm slogging my way through. From past experience, it seemed to me that a two-way hyperlink should work, but it took me a bit of trying to find the correct combinations to accomplish it! Thanks again.
Small Town Gal

Position drift during the stepper motor controlled back and forth motion

Hi everyone there,
I get a headache position drift problem during the stepper motor controlled back and forth motion. I have been wroking on the problem for the last two weeks, and still can not figure it out. So I write down here my problem in hope of getting some clues from those have some experiences in stepper motor motion control.
My goal is to use a stepper motor to drive a beam flage fixed onto the shaft to go back and forth for a certain angle, and this back and forth motion needs to be stable and reproducible within hours. With the SMD1 stepper motor driver, I only need to send in a pulse train to control the number of steps(the pulse frequency defines the stepping rate), and another pulse to controle the direction (i.e., cw or ccw). To do this, in LabView, I used the counter of the DAQ board to produce a finite pulse train to step the motor, and used one digital line to produce a pulse to switch the direction every 500ms, the timing is contolled by the software.(I used the oscilloscope to monitor these two pulses, the pulse train produced by the counter looks very stable, and delay between the pulse edges of the direction pulse and the pulse train is also very stable within 500ms. There seems no software timing problems at such a long delay.) And this labview controlled motor appears to work perfectly as I required, the motor steps a defined number of steps at one direction, and then steps back at the origin position. But after running for a few minutes, the back position shifts gradually(I can not observe a obvious shift at the first few minutes) with repect to the origin position(the position I start running). I looked it up at the manual and also the website, I got a clue that this might because the motor steps at the resonace frequency of the motor and hence misses or takes extral steps sometimes. So I changed the steping rate from 1Hz to 1000Hz to see if the shift disappears or gets smaller at certain frequency range, but the shift always exists.
I did observe the shift got smaller within the same running time when change the step model from full step (1.8degree/step)to half and quarter step model. According to this, the motor did miss steps (or pulses) during running, the quarter step model has smaller shift due to the smaller steps. But I also noticed that the motor always shift at one direction, no matter I started with clockwise or counter-clockwise, this seems really strange to me. Because the motor should shift at each direction with the same probability if we assume the motor missis steps randomly.
There is something must be wrong, either the labveiw program or the motor, but I don't even know a clue of this weird shift problem. And because of this, I haven't made any progress in my lab for the last three weeks. So any suggestions could be very helpful for solving this headache and will be really appreciated.
Thanks a million in advance and Merry Christmas!
Li

Hey, Brian Beal,
Thanks for your quick response. "accel" and "decel" mean acceleration and deceleration, am I understanding right?
If yes, then I don't have these in my LabView program, I just generate one TTL pulse train and one TTL pulse with LabView and send them into the SMD1 stepper motor driver.
The pulse train steps the shaft, and the other switchs the direction.
Yesterday, I confirmed that if the motor steer always at one direction either CW or CCW, then the stepping were very stable, no missing or extra steps happen for hours.
And I also observed that the motor took one extra step from time to time when the direction changes. And this only happens when the direction switch from CW to CCW. (bizarre!)
I guess this indicates that some pulse noise happens when the motor switch the direction too often. But I just don't have any clue for irregular extra steps.

Exported video's frames back-and-forth quickly

Similar Messages

Maybe you are looking for