Exporting 16:9 for use in full screen 16:9 iDVD
Using a Panasonic DVX-100B video cam, I shot footage in the “squeeze” mode at 24p. I captured it in FCP 5.1.4 and edited it. I used the same settings for capturing that I had used before when using an older video cam with no 24p and only 4:3. Picture appeared in both "viewer" and "canvas" with bars on top and bottom and in the correct aspect ratio.
I exported to Quicktime. When I transferred the QT video to iDVD, the widescreen template still had bars at the top and bottom and appeared stretched. Looking at it in the 4:3 template produced a picture that was correct in aspect ratio but had bars at top and sides.
My goal is to capture, edit and produce a DVD with full screen 16:9 appearance from a "squeezed" video source.
I’ve tried many variations but can’t seem to make it happen. I also checked that the scale in Quicktime was 853 x 480 and that "keep aspect ratio" was unchecked.
Any help would be greatly appreciated.
There is a lot of conflicting information in your post.
I believe you shot LETTERBOX and not squeeze on the dvx.
One bug/feature of the DVX B model is that it will display SQUEEZE footage the same way as it does the LETTERBOX -- with bars top and bottom... giving you no quick way to make sure on the camera's display screen.
By you saying that both the viewer AND the canvas show black bars top and bottom leads me to believe that indeed you didn't shoot squeeze. If it was just the canvas, ok - you had settings wrong. But the VIEWER shows you exactly what the video is straight from the source. Black bars there? Black bars on the file.
SO - what do you do?
Coupla options.
1) re shoot everything (hee)
2) Leave it alone and stay 4:3 with black bars.
3) Create a new sequence that is DV/NTSC and click the ANAMORPHIC button. Drag the old finished sequence onto that and you should see video in a 'black box' -- bars left and right and bars top and bottom. Then click on the sequence inside the sequence and hit your ENTER (num keypad, not RETURN) this will send it to the VIEWER. CLick the MOTION tab and resize to 133.33. Yes, you'll loose quality... but hey, it's dv - not the greatest quality anyway.
Then - export that file (will be 're-squeezed') as self-contained current settings QT Movie and drag it onto this:
http://homepage.mac.com/sith33/FileSharing34.html
Will create a file iDVD will recognize as 16:9. Add to iDVD build and burn.
Done.
Good luck,
CaptM
Similar Messages
-
I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
I use a macbook pro retina. I use a 32 in. monitor and use it full screen. I size the screen manually. Since i upgraded to maverick, I have to resize the screen each time I change windows.Before the upgrade the screen stayed where I put it.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?
All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
Is there an easier way to do this, bypassing iDVD?
Some DVD players will play a disc containing jpeg images -
Use 2 Full Screen Apps in Dual Monitors
I always work with two monitors. How I can use two full-screen apps at time (e.g. Xcode + iCal) ?
Here is a screen shot of my 3 monitor setup under Snow Leopard, and it is my understanding that Lion will make the two side monitors display a linen pattern.
The center monitor (iMac 27") is Aperture in full screen mode, the left one has Mail, the right Safari, both have Aperture HUDs.
I'm thinking that real linen would have been cheaper than faking it with two external monitors. -
How I can allow always and for all sites full-screen mode?
How I can allow always and for all sites full-screen mode?
And I want choose anywhere option "never show notification about full-screen mode" (screenshot attached)
RUS
Как я могу всегда разрешить и для всех сайтов полноэкранный режим?
И я хочу выбрать где-нибудь опцию "никогда не показывать уведомление о полноэкранном режиме" (скриншот приложен)There is a preference setting on the <b>about:config</b> page that is meant for developers and testers to make this possible, but it is not meant for normal users.
*full-screen-api.approval-required = false
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
Exporting from FCP for use with PC
Hey all,
Trying to deliver a high-med quality 8 minute video from FCP for use with a PC. I've tried exporting both a .mov and .avi using DVCPro50, but neither are readable through the PC. Best I can get is sometimes audio will show up. Does anyone have a good solution for exporting from FCP for use with a PC?
Thanks again for your help!I don't think DVCpro50 codec is available on a PC. I think panasonic has a special license with apple only, so you need to try a different codec for the avi.
-
Am having problems with display hovering in open tabs. I used Full screen last night when browsing for first time and since then when I go back to normal view the window shakes up and down about 1/4 inch and have to go to full screen for steady view. The toolbars are all steady it is only the web page.
== This happened ==
Every time Firefox opened
== Last night after using full screen.Do you have any saved bookmarks on the Bookmarks Toolbar, or that that Toolbar empty and you have it being displayed??
Try opening View > Toolbars and click on the Bookmark Toolbar item to remove the check-mark, and then see how that affects that "jumping" or vertical oscillation of the UI.
If that doesn't solve your problem, you can try the Firefox SafeMode and verify that problem doesn't exist in that troubleshooting mode.
[http://support.mozilla.com/en-US/kb/Safe+Mode]
If it is gone in SafeMode, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
I'd like to get iWork on both my ipad 2 and iphone 4 mainly for traveling purposes... Right now I lent my iPad to my dad whose in somewhere else now so I don't have access to the iPad. So, I was wondering if right now I buy iWork onto my iPhone, and then when the iPad comes home, can I install that same iWork I bought through my apple acout and not have to pay for another version, and the iPad iWork can go full screen beautifully and not ugly?
iWork is universal, so it will work full-res on the iPad. This is true for any app which has the plus sign symbol (in the App Store in iTunes it will say "This app is designed for iPhone and iPad".
Matt -
http://epaper.dawn.com. If you click on any of the articles, it opens that in a new window with full screen. I know I have configured FireFox earlier to not let script use full screen. I seem to not find it OR it has been removed.
See:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings -
Export as PDF and viewing in full screen mode
Using LR 4.3, I'm exporting a slideshow to PDF. Even though I turned off transitions in LR, the transitions automatcally start in Acrobat X in full screen mode.
My goal is to present ths slide show with a mouse click, or arrow key, to move to the next slide in full screen mode. Any ideas?
Thanks.Yes, because Acrobat has its own transition settings that take precedence over the settings in Lr.
In Acrobat go >Edit >Preferences >Full Screen and under <Default Transitions> select <No Transition>. -
Time for a True "Full Screen" Mode
Instead of using Shift-Tab and "L" and "F" to achieve something resembling a reall Full Screen display and editing mode, it is time to implement the ability to simply hit a single keyboard stroke and go to a display mode that truly displays images bounded by the edges of the screen with no surround. And then have the ability to invoke editing with a single key stroke. The amount of fiddling we have to go through currently is just nonsense.
I strongly support this request, and it really should have been a feature in the beta (tried to look for similar requests in the mentioned forum, but the search function there is useless - "lightroom fullscreen preview" returns 2221 hits and none of the top hits are relevant). Anyway: All the cool and brilliant features of LR 4 aside, photo management is above all about viewing and it baffles me that state of the art software like LR doesn't provide simple and real full screen viewing. Why on earth isn't the Bridge solution (or an improved version of it) implemented in LR: ONE keystroke to get a fullscreen fit image preview, ONE click to zoom to 1:1, simple trackpad gestures to move around, ONE key to get back again, ONE key to get to develop mode.
The unneccessary convoluted juggling of keys we have now is one thing, quite another is that "fullscreen" still only uses 80% of the available real estate. This is a show stopper to me - even more so when I'm working on a laptop. -
Lightroom is acting up today. If I enter the fullscreen mode to view images, when I try to exit out of it back to the library or develop mode, after one second its returning back to the full screen mode. The only way to exit is to command Q. Any ideas?
Found this on another thread. Havent tried it yet, but am about to.
4. Re: lightroom 5.4 gets stuck in full screen preview?
mohammedabidally Jun 1, 2014 10:53 PM (in response to freophotos)
Hi ye I followed the procedure given here https://forums.adobe.com/inbox?objectType=2&objectID=6355272 and it worked for me.
You need to do it with the cursor.....
"restarted Lightroom then using the menu with cursor only (NOT THE F KEY) I went to window …. Screen mode….. and tried the various modes.. Screen Mode with Menu…..Full Screen…. then the Full Screen Preview (this is was my issue) Once in Full Screen Preview I got out of it using the escape key which worked…. Then I hit the F-Key which again took it into Full Screen Preview then I tried the F-key to get out and it worked!!….. " -
Yep..heres another problem I have...I am trying to figure this out. I want to watch a video or a movie and I can't seem to watch it at full screen capacity....I only am able to watch it on the little box...when I put it for full screen it shows nothing...just a blank grey colored dull mess. I can hear the movie or video playing but no picture. Please if anyone knows what the deal is can you please respond to my problem.
In addition to the (very critical) information Smithy asked for, are you using a "slightly unusual" configuration such as an external monitor on a laptop?
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
FlashDVD.swf to FLA for better interface (full screen...)
Does anyone know how to edit the FLA for FlashDVD.swf so i can add features like full screen and stuff? Posably decompiling?
They don't bother me, but I know how those little things can be sometimes... and respect your opinion that they bother you. I don't think anyone would be adversely affected if they were toned down a touch or two (i.e. made darker, but still visible).
To take it a step further, I actually may see an opportunity for the developers to add some value to these markers (regardless of whether or not they make them less obtrusive or not): position them according to the center-lines of the image being viewed (rather than the center-lines of the monitor, as they are currently). In their current implementation, they provide useful information (i.e. a quick and easy way to see the center of each axis) only if no panels are visible, or if both the left- and the right-panels are visible and also identical in size. If one side panel is taken away (as in the screen-shot you posted above), the top and bottom arrows no longer provide useful information, as the center of the image is now shifted towards the side without a visible panel.
It's a small detail, but perhaps and easy one to refine...
Maybe you are looking for
-
Media Encoder CC crashes on startup
I just bought and installed the lasted version of the CS suite through the cloud. Everything else seems to be working so far, except Media Encoder CC. When I downloaded all of the software, it came with both Media Encoder CC and CS6. CS6 works just f
-
I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.
-
E8350 Disable Wireless Access to Configuration Web UI feature NOT WORKING
Looks like something got past QA for the 1.0 version of the firmware for the E8350. Under Admistration -> Access via Wireless and set it to "Diabled" I am still able to get to the managment UI while connected to the E8350 over 5GHZ connection. I am s
-
Skype Startup Crash on Windows 7
After login sound and two seconds of loading, the Skype windows cease to respond and Skype will crash when one clicks on any Skype window. I am using Skype version 7.6.0.103. The problem began on Skype 7.2, but I uninstalled that and installed Skype
-
I am unable to succeed with sql agent job, I am trying to execute the SSIS package through sql agent job by ticking 32 bit runtime check box in 64 bit machine , even it does not worked.. could any one helpme on this? Source: Excel Load Connection ma