Exporting 48 minute film takes hours. Could you check my workflow?

Greetings.
I have just finished editing a project and am trying to export a QT file to be used in IDVD or toast and am wondering if I am going about this in the right way.
First, a bit of background about my project, settings, and system. G5 1.8 4GB ram. External Lacie 1TB FW 800 drive connected to FW 800 port on G5. The Lacie is where my project file, media,, etc. are on. I have 700GB available space on that drive. My internal drive has 16GB space left, that has the OS, FC, apps, and so on.
My project was captured from a Canon HV30 via FW using AIC 1080/60. No weird files imported, everything rendered prior to export. The footage was shot HDV30P. The final length of the video is about 48 minutes.
I added four chapters markers, but none at begining or end as I've learned. I did add an "In" at very beginning of timeline and an "Out" at the very end of project. ( honestly, I'm not sure whether I even need to do this) I rendered everything before export.
I then went to File>Export QT and un-checked make self contain file. Clicked Ok and a few minutes later I had the file that has the FC logo on my desktop (internal drive)
Next I opened that file in QT, went to file>export settings were H.264, good quality, Automatic frame rate and clicked Save and directed QT to save that file on my 1TB Lacie. I did not alter the size, I left that at 1280x 720(?)
My first problem is the time it takes to export this thing.
My first attempt started yesterday at 4:30PM, I left it going all night and the export was still only about 1/3 the way done the next morning. That attempt was to try and save the export to my desktop (internal drive with only 16GB left on it). Thats when I figured maybe I needed more space for the export, so I'm doing the same thing above right now, but I am now exporting the .mov file to the Lacie 1TB drive. I see by the blue blinking front light on the Lacie that some activity is going on.
So I guess my first question does it normally take hours/days to export a HDV project to H.264, good quality for a 48 minute project?
My second question is my goal is to get the project onto DVD using IDVD. I'm assuming I start an IDVD project in widescreen so that my project is viewed on my rather old Sony 4:3 TV, it will appear letterboxed (black bars on top and bottom). This is what I would like.
Is my work flow good? Do I just need to be patient and make **** sure thatr project is exactly the way I want it before export?
Sorry for the LONG post, but I wanted tto give as much info as possible for you to access.
Jonathan
Message was edited by: Jonathan Levin2

Ok, so you captured the HDV footage as AIC. Can you double check and report back the actual Item Properties for one of these captured clips ... select one in the browser and press Cmd-9 then post back with the settings listed there. Do likewise for you sequence.
Then you edited and exported a reference movie ... thats fine if you need to save disk space and you're not intending to use AIC as your edit master version, but still a self contained export would be more robust and further processing would generally be faster/more reliable than working with a self contained media file.
(A bit off the point, but I also note that you say that +the Lacie is where my project file, media, etc. are on"+ ... Danger, Will Robinson! Or at least, potentially so. Don't throw all your Easter Eggs in one basket. Make sure your project file is not stored in the same physical location as your Autosave Vault directory, else if the drive fails you'll have no means of recovering all your hard work.)
Next you opened that reference movie in QT Player and used it to create an H264 movie ... is that an intended target? Other than creating a SD DVD copy you don't note the intended audience / delivery for this piece. Creating an H264 version would not be a suggested part of the workflow for SD DVD delivery. You also note that you left the file size at its default, guessing that was 1280x720 ... can you double check that? As noted above already, 1280x720 denotes a HD 720 frame size, not an HD 1080 frame size. Unless you are doing this with specific intent then you'll probably want to leave it unscaled for your edit master.
Anyhoo, if you're looking for a good workflow for creating an SD DVD from an HD edit then you'll find a lot of good advice here:
http://www.kenstone.net/fcphomepage/hdv_timeline_to_sddvd.html
This one may be interesting t you also:
http://www.kenstone.net/fcphomepage/hdv_to_prores_with_chapter_markersstone.html
Both of the above are ProRes based workflows but should work equally well if you substitute AIC if thats your preference.
Best
Andy

Similar Messages

Could you check our source? (To determine the PR type and number range)

Hello.
We use SRM Server5.5 with Classic Scenario.
We will use the BADI BBP_SC_TRANSFER_BE to determine the PR type and number range according to your recommend.
We have two PR type in R/3.
1) KGPR
2) KTR1
As you know that shopping cart has no type. So we add customer field to mapping to R/3 PR type and this field has two values.
1)     PR01: mapping to KGPR
2)     PR02: mapping to KTR1
We will use the method GROUP_RQ to determine the PR type.
If customer field is PR01, PR type is determined KGPR
If customer field is PR002, PR type is determined KTR1.
To determine the PR number range, we will use the method GET_NUMBER_OR_RANGE.
If PR type is KGPR, Choose the No key 12
If PR type is KTR1, Choose the No key 16.
Configuration step:
1.     Maintain the PR number range in SRM.
No key: 12 (for KGPR) internal NR
No range: 2520000000 2529000000
No key: 16 (for KTR1) internal NR
No range: 2560000000 2569000000
2.     Maintain the PR number range in R/3
No key: 12 (for KGPR) Ext NR
No range: 2520000000 2529000000
No key: 16 (for KTR1) Ext NR
No range: 2560000000 2569000000
3.     Assign the PR number range to PR type in R/3
KGPR 12 (EXT)
KTR1 16 (EXT)
4.     Maintain the attribute in SRM
Document type in R/3
      Add KGPR and KTR1
We developed this logic, but its not working.
LOOP AT ct_proc_item INTO ls_proc_item Where is no date in ct_proc_item:
We can not find out the reason.
Could you check our source?
METHOD if_ex_bbp_sc_transfer_be~group_rq.
DATA:
       ls_proc_item           TYPE bbps_procurement,
       lv_number_int          TYPE bbp_item_no,
       ls_item                TYPE bbp_pds_transfer_item,
       lv_group_counter       TYPE numc5,
CONSTANTS:
      lc_on(1)               VALUE 'X'.
SORT ct_proc_item BY obj_to_gen.
CLEAR: lv_group_counter.
LOOP AT ct_proc_item INTO ls_proc_item
where obj_to_gen eq iv_object_to_generate.
get item data which includes customer fields
    MOVE ls_proc_item-preq_item TO lv_number_int. " convert
    READ TABLE it_item INTO ls_item WITH KEY number_int = lv_number_int.
    IF sy-subrc = 0.
      IF ls_item-pr_type EQ 'PR01'.
        ls_proc_item-doc_type = 'KGRP'.
      ELSEIF ls_item-pr_type EQ 'PR02'.
        ls_proc_item-doc_type = 'KTR1'.
      ENDIF. " lv_cust_field
      lv_group_counter = lv_group_counter + 1.   " increase counter
      ls_proc_item-group_1 = lv_group_counter.
      MODIFY ct_proc_item FROM ls_proc_item
             TRANSPORTING group_1.
    ENDIF. " sy-subrc
ENDLOOP.
cv_method_active = lc_on.
ENDMETHOD.
method IF_EX_BBP_SC_TRANSFER_BE~GET_NUMBER_OR_RANGE.
if is_item-pr_type = 'PR01'.
     CV_NUMBER_RANGE = '12'.
     CV_NUMBER = '2520000000'.
elseif is_item-pr_type = 'PR02'.
     CV_NUMBER_RANGE = '16'.
     CV_NUMBER = '2560000000'.
endif. " is_proc_item / is_item
Thank you
Best Regard
SH

Hi
Please find some suitable sample code, which might help you out.
method IF_EX_BBP_SC_TRANSFER_BE~GET_NUMBER_OR_RANGE .
* IV_OBJECT_TO_GENERATE
*   '1' Reservation
*   '2' Purchase Requsition (BANF)
*   '3' Purchase Order
*   '4' Customer Object
* 1. current item data are in structures
*    - IS_ITEM shopping cart item data including Customer Fields
*    - IS_PROC backend relevant item purchasing data
* 2. accounting data in tables
*    - IT_ACCOUNT all shopping cart account. data with Customer Fields
*    - IT_PROC_ACCOUNT backend relevant accounting data for current item
* - key criteria between this tables are
*    - it_proc_account-preq_item
*                     -serial_no (numc 2)
*    - guid from is_item
*    - it_account-p_guid
*                -accno(numc 4)
* A) example to use current item data + item customer fields
* if is_proc_item-DOC_TYPE = 'ABCD' AND
*     is_item-<field of CI_BBP_ITEM> = .
* set own number range
* CV_NUMBER_RANGE = .
** set own number
** .. ==> if initial SAP Standard with no.range will be processed
* CV_NUMBER = .
* endif. " is_proc_item / is_item
* B) example to use only proc_account no accounting customer fields
*data:
*     ls_proc_account   type bbp_bapipogna.
* loop at it_proc_account
*            into ls_proc_account.
*    if ls_proc_account-BUS_AREA = '9988'.
** set own number range
* CV_NUMBER_RANGE = .
** set own number
** .. ==> if initial SAP Standard with no.range will be processed
* CV_NUMBER = .
*     endif. " ls_proc_account
* endloop.
* C) example to use only accounting customer fields, no other accounting
*data:
*     ls_account        type bbp_pds_acc.
* loop at it_account
*            into ls_account
*            where p_guid = is_item-guid.
*    if ls_account-<field of CI_BBP_ACC> = .
** set own number range
* CV_NUMBER_RANGE = .
** set own number
** .. ==> if initial SAP Standard with no.range will be processed
* CV_NUMBER = .
*   endif. " ls_account
* endloop.
* D) example to use proc_account + customer fields for accounting
*data:
*     lv_serial_no      type bbp_bapipogna-serial_no, " sequence num 2
*     lv_acc_no         type bbp_pds_acc-acc_no,       " sequence num 4
*     ls_proc_account   type bbp_bapipogna,
*     ls_account        type bbp_pds_acc.
* loop at it_proc_account
*            into ls_proc_account.
*    move ls_proc_account-serial_no to lv_acc_no.
*    read table it_account
*         into ls_account
*         with key p_guid = is_item-guid
*                  acc_no = lv_acc_no.
*    if sy-subrc = 0.
**     if ls_account-<field of CI_BBP_ACC> = .
** set own number range
** CV_NUMBER_RANGE = .
** set own number
** .. ==> if initial SAP Standard with no.range will be processed
** CV_NUMBER = .
**      endif. " ls_account
*    endif. " sy-subrc
* endloop.
endmethod.
method IF_EX_BBP_SC_TRANSFER_BE~GROUP_RQ .
* 1. current item data are in structures
*    - IT_ITEM all shopping cart item data including Customer Fields
*    - IT_PROC_ITEM backend relevant item data of current log.system
*    key criteria between this tables are:
*    - IT_ITEM-NUMBER_INT (numc 10)
*    - IT_PROC_ITEM       (numc 5)
* 2. accounting data in tables
*    - IT_ACCOUNT all shopping cart account. data incl. Customer Fields
*    - IT_PROC_ACCOUNT backend relevant accounting data for current item
* - key criteria between this tables are
*    - it_proc_account-preq_item (numc 5)
*                     -serial_no (numc 2)
*    - is_item-guid
*             -number_int (numc 10)
*    - it_account-p_guid
*                -accno(numc 4)
constants:
      lc_on(1)               VALUE 'X'.
* A) example to use only proc_item with NO customer fields
*         group requisitions by backend document type
*data: lv_doc_type            TYPE esart,
*      ls_proc_item           type BBPS_PROCUREMENT,
*      lv_group_counter       type numc5.
*    clear lv_group_counter.
*    clear lv_doc_type.
*    SORT ct_proc_item BY obj_to_gen doc_type.
*    LOOP AT ct_proc_item
*            into ls_proc_item
*            WHERE obj_to_gen EQ iv_object_to_generate.
** new group criteria?
*      if lv_doc_type ne ls_proc_item-doc_type.     " backend doc.type
*        lv_group_counter = lv_group_counter + 1.   " increase counter
*        lv_doc_type      = ls_proc_item-doc_type.       " save criteria
*      endif.
*      ls_proc_item-group_1 = lv_group_counter.
*      modify ct_proc_item from ls_proc_item
*             transporting group_1.
*    ENDLOOP.
* B) example to use item customer fields
* data:
*      ls_proc_item           type BBPS_PROCUREMENT,
*      lv_cust_field          type <field of ci_bbp_item>.
*      lv_number_int          type BBP_ITEM_NO,
*      ls_item                type BBP_PDS_TRANSFER_ITEM.
*    clear lv_group_counter.
*    clear lv_cust_field .
*    SORT ct_proc_item BY obj_to_gen.
*    LOOP AT ct_proc_item
*            into ls_proc_item
*            WHERE obj_to_gen EQ iv_object_to_generate.
** get item data which includes customer fields
*      move ls_proc_item-preq_item to lv_number_int. " convert
*      read table it_item
*           into ls_item
*           with key number_int = lv_number_int.
*      if sy-subrc = 0.
**       new group criteria?
*        if lv_cust_field ne 'XYZ'.
*         lv_group_counter = lv_group_counter + 1.   " increase counter
*         lv_cust_field = ls_item-<field of ci_bbp_item>."save criteria
*        endif. " lv_cust_field
*        ls_proc_item-group_1 = lv_group_counter.
*        modify ct_proc_item from ls_proc_item
*               transporting group_1.
*      endif. " sy-subrc
*    ENDLOOP.
* C) example to use accounting data with customer fields
*            group requisitions by backend document type
*data: lv_doc_type            TYPE esart,
*      ls_proc_item           type BBPS_PROCUREMENT,
*      lt_account             type BBPT_PD_ACC,
*      ls_account             type bbp_pds_acc,
*      ls_item                type BBP_PDS_TRANSFER_ITEM,
*      lv_number_int          type BBP_ITEM_NO,
*      lv_account_flag        type c,
*      lv_group_counter       type numc5.
*    clear lv_group_counter.
*    clear lv_doc_type.
*    SORT ct_proc_item BY obj_to_gen doc_type.
*    lt_account[] = it_account[].
*    SORT lt_account BY p_guid acc_no.
*    LOOP AT ct_proc_item
*            into ls_proc_item
*            WHERE obj_to_gen EQ iv_object_to_generate.
** get accounting customer fields for this item
*    clear lv_account_flag.
** ..first get item guid
*    move ls_proc_item-preq_item to lv_number_int.
*    read table it_item
*         into ls_item
*         with key number_int = lv_number_int.
*    if sy-subrc = 0.
*      loop at lt_account
*           into ls_account
*           where p_guid = ls_item-guid.
*        if ls_account-<field of CI_BBP_ACC> = .
*           lv_account_flag = lc_on.
*        endif.
*      endloop.
*    endif. " sy-subrc it_item
** new group criteria?
*      if lv_doc_type ne ls_proc_item-doc_type OR     " backend doc.type
*         lv_account_flag = lc_on.                    " accounting
*        lv_group_counter = lv_group_counter + 1.   " increase counter
*        lv_doc_type      = ls_proc_item-doc_type.       " save criteria
*      endif.
*      ls_proc_item-group_1 = lv_group_counter.
*      modify ct_proc_item from ls_proc_item
*             transporting group_1.
*    ENDLOOP.
* !!!! set flag that BADI was processed
* .. ==> no SAP Standard grouping will be processed
    cv_method_active = lc_on.
endmethod.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

I hear static, do you? Could you check please?

I have an 80 gig classic and have been wrestling with sound quality issues.
I ripped some music using LAME at 320 kBit/s using EAC and it plays fine on my old Rio Carbon. But at precisely the same spot in the track every time, when a loud chorus starts to sing, my iPod will have some static mixed in with the voices. I've re-ripped the track using various encodings, iTunes, iTunes lossless etc, and the results are always the same at the same spot. I've tried different ear buds, including my Shure E3c's, still iPod static. The static always follows the iPod, the Carbon always sounds fine.
This isn't the only track either. It's actually quite common and usually occurs during louder notes or voices. Even from pristine scratchless freshly ripped CDs.
Is this common? The track in my example is from The Lord of the Rings, the Two Towers, Foundations of Stone, at precisely 2:30 to 2:35 into the track, just as the chorus starts to singe. If someone who has an iPod and this track, could you listen and check, I would greatly appreciate it. I hope it's just my iPod, because then I can exchange it as defective.
Thanks, thanks, thanks!

To exemplify what I mean, I've create a 5 second MP3 cut of the area with static. I then used my PC to record that clip being played by my iPod and by my old player.
I've uploaded these clips to me website.
The 5 second source MP3 clip is here: http://www.lunarorbit.net/CausesStaticOniPodsOnly.mp3
When played on a computer, there is no static.
My old MP3 player's recording is here: http://www.lunarorbit.net/NoniPodNoStatic.wav
Sounds the same, doesn't it?
And my poor iPod's recording with static is here: http://www.lunarorbit.net/iPodStatic.wav
Listen carefully with headphone. Do you hear it?
Is it just my iPod?

Can only export 18 minutes of 1 hour time line

Hello
I have a completely rendered, for Neat noise reduction, time line that is just over 1 hour long by about a minute. This was an award ceremony for a client shot on Sony PMW320 camcorder with SxS card at 1080i 29.97 and set up the same in Premiere on the time line. Lights illuminating the stage at request of the CEO had been taken down much lower than they should have been because they were bothering him at the lecturn where he was speaking in pre-show checks. Consequently I had to use 12db gain which left me with a lot of noise. My plan was to use Neat noise reduction and take care of all the render times and mixing of two mono audio tracks in Premiere before giving him a Quicktime file to use in his FCP system and then he would be able to insert the reaction and floor shots from a 2nd handheld B camera which was mobile on the floor. I did not know if he had a good noise reduction software program himself and just wanted to save him all the labor.
As I am new to Premiere my first project for this for the time line did not have the audio set up correctly, but the clips were imported into the Media Browser and were able to be worked with OK for a short while before I realized I would nead to redo it for the audio. From my camera it was a continuous 1 hour take but the SxS files copied straight from my camcorder first to my 2 3TB internal drives set up for RAID 0 on my new Mac Pro from OWC built with their MPG program, were broken into 3.56GB clips of 12 min 32 second lengths.     6 core 3.46ghz CPU and Quadro 4000 GPU 48gb memory for the system.
On the second and new project with the correct audio settings, I experimented with copying those same files from the camcorder to a different 1TB internal drive. I must have done that differently, maybe by hi lighting the separate clips together and dragging them into the drive, because when I imported them into the Media Browser this time they came in as 1 continuous file. And that is what is on the noise processed and audio mixed time line.....one continuous sequence with no cuts or breaks in it.
Twice now I have tried to export the completely rendered "continuous" sequence to a 64gb flash drive with the USB 2.0 connector on the Mac. Each time the process has taken about 7 and 1/2 hours and each time it has stopped at 18 minutes and 11 seconds in. 4.29GB copied for both tries. Does anyone see something here that explains why the export would stop short each time in the same place? No error messages, and no problem with RAM as I have the 48gb.   When setting it up and the export begins it shows in the window the full 1 hour length with the start and end points it will take it from.
Thanks much
Ron

Sorry for the delay in getting back. I had woken around 3:30AM and got up to check the status of the 2nd export attempt, and when I found the same situation as the first attempt, stayed up to post here and see what reponses hopefully might be here when I got up in the morning.
Ann, there are no gaps on the time line as it is one continuous file, due I guess in how I saved it to the other disc. Just uploaded the one really good Neat profile I got on the individual file segments in the browser from the RAID drive that I had placed on the time line with the first sequence. The first three of those left a bit more noise in some spots, but a lot of noise still crawling on the right cheek of the CEO in the low light he saddled us with. Luckily the 4 try Neat really nailed it.
BUT....after typing the above I just re-inserted the Lexar flash drive and brought up its info and yep it does say, "MS-DOS (FAT 32)"    Uggghhhh! Bought it a week and a half ago from Office Depot in town. Wasn't cheap.... $178 plus tax. Still have my receipt, hopefully they will refund. This type of scenario is exactly why I bought that large a size ....64gb. To be able to have enough space to leave shooting job with a client if necessary and they could mail it back to me when the job was offloaded.
Is there any kind of flash drive that size then, that doesn't have the file size restriction I can pick up from on line or like a Frys please? I think the incredibly slow export was due to the 2.0 USB and all the Neat noise reducing information, plus HD codec I guess. 7 1/2 hour export and only 18 minutes out of the hour covered.. Are there any other convenient options to leave with a client, with maybe SATA connection, which would be safe to ship back to me in these situations that could take the jostling from shipping?
Thanks very much
Ron

Why do films take hours to download on apple tv in France ?

We bought apple tv in the uk to use in our home in France, we were told it would work fine however we tried to download a movie and it came up saying it was 3 hours remaining on the download. We left it for 3 hours, came back and the download time was over 5 hours remaining and still hasn't downloaded. Is anybody else having this problem? Our apple tv works fine in our home in the uk just not in France.

Welcome to the Apple Community.
The first thing to check would be your internet download speed, you can do this atwww.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Could you check it, please?

Hi guys,
I am an italian guy who is thinking to move from an amd platform to an intel one within a month.
I searched around and I think I'll take the MSI P965 Neo-F (skt 775).
I read there are a couple of incompatible issues about memory and sata drives but I know the can be solved easily.
Now I'd like you to check this memory out.
I chose :
Corsair 1GB - DDR2 667Mhz (PC2-5300) NON ECC - 240 Pin - CAS Latency 5 - VS1GB667D2
Do you know and issues about this mobo and this ram ?
thanks
Bye

Quote
Ciao,
non ci sono particolari problemi con alcun tipo di memorie. I problemi sono con il BIOS e la scelta dei timing, che però a default non danno problemi e la motherboard setta quelli delle memorie impostati di fabbrica.
Ciao ciao
Hello,
not there are particular problems with some type of memories.
The problems are with the BIOS and the choice of the timing, than but
to default it does not give problems and motherboard the schism those
of the memories sets up you of factory.
Hello hello
Quote
grazie
in realtà leggendo quà e là mi preoccupava sentire voci sul bios e le memorie, etc etc
allora posso procedere all'acquisto
thanks
in reality reading here and here took care to feel voices to me on bios and the memories, etc etc
then I can proceed to the purchase
I used an online translator. Use English only please. This is a posting in English only forum. Please read and comply with the Forum Rules.
I can see posting in the language to make it easier for the person if you can write or read in that language, but translate the text into English.

Could you check your CRM system for a business role?

Hi Forum,
i have difficulties getting my business partner from IS-U to CRM in an initial load because a business partner role is missing in CRM. The role is 'MKK' Contract Partner
It exists in IS-U but not in my CRM. As i cannot create that role in CRM because it is in the SAP namespace i would like to know if it exists in your CRM system. And - if you can say - how it came there. By default/installation or later by middleware processes.
Thank you

Please - just make a little check in your CRM system...is there a role 'MKK' contract partner or not ??
From that depends where i can continue searching for the error
SPRO -> Cross Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Business Partner Roles -> Define BP Roles
Thank you

Could you check this code ??

Hi Guyz,
Here is my piece of code.
FORM get_infotype_data TABLES pi_it0001_tbl      TYPE t_it0001_tbl
                              pi_emp_info_tbl    TYPE t_emp_info_tbl
                              pi_event_dates_tbl TYPE t_event_dates_tbl
                              po_emp_tab_tbl     TYPE t_emp_tab_tbl.
DATA: l_it0001_tbl   TYPE t_it0001_tbl,
        l_it0001_str   TYPE t_it0001_str,
        l_emp_info_tbl TYPE t_emp_info_tbl,
        l_emp_info_str TYPE t_emp_info_str,
        l_event_dates_str TYPE t_event_dates_str,
        l_emp_tab_tbl TYPE t_emp_tab_tbl,
        l_emp_tab_str TYPE t_emp_tab_str.
SORT: pi_it0001_tbl      BY pernr,
        pi_emp_info_tbl    BY pernr,
        pi_event_dates_tbl BY pernr.
LOOP AT pi_it0001_tbl INTO l_it0001_str.
    READ TABLE pi_emp_info_tbl
    WITH KEY pernr = l_it0001_str-pernr BINARY SEARCH.
    IF sy-subrc = 0 .
    clear l_emp_info_str.
      MOVE: l_emp_info_str-perid TO l_emp_tab_str-perid,
            l_emp_info_str-gbdat TO l_emp_tab_str-gbdat.
      CASE l_emp_info_str-gesch.
        WHEN '1'.
          MOVE 'M' TO l_emp_tab_str-gesch.
        WHEN '2'.
          MOVE 'F' TO l_emp_tab_str-gesch.
      ENDCASE.
    ENDIF.
    READ TABLE pi_event_dates_tbl WITH KEY pernr = l_it0001_str-pernr
    BINARY SEARCH.
    IF sy-subrc = 0.
      MOVE: l_event_dates_str-betrg TO l_emp_tab_str-betrg.
    ENDIF.
    MOVE l_emp_tab_str TO po_emp_tab_tbl.
ENDLOOP.
ENDFORM.                                         " get_infotype_data
I am not getting any data in to the table po_emp_tab_tbl.
After rwading the table, Getting sy-subrc = 0.
Please help me.

1. structure for both l_emp_tab_str and po_emp_tab_tbl are different.
2. move one by one field to dest. structure.
3. check whether data is populating in the l_emp_tab_str .
4. as well as in int. table pi_it0001_tbl.
5. u defined the stru. for po_emp_tab_tbl as a work area.
wheterh it should be work area or table?
if its table, define table type

How do I get tech help for export pdf during Australian business hours?

How do I get tech help for export pdf during Australian business hours?

You can post your issues in this forum or send your questions to DL-exportpdf_feedback.
Jyh-Jiun Liou

Can you check my final setup? Two things not clear yet

Hey guys,
Just when I thought I got it all figured out, something new (at least to me) pops up and raises more questions than answers. So I go on and search more and more and more and now finally I think i've got my setup allmost ready to order. Could you check it and help me out on the final insecurities? Thanx a bunch.
Oh and please, if you have a suggestions to change something I feel is allready o.k (so no questions)...make it a suggestion with enough info to let me make a choice in the matter. Give me a link to a Benchmarksite or e really good test. If the difference is minimal (seconds) on about 10 min. of final footage, than please don't send me on a chase again. My girlfriend would like me to bed with her at the same time now after a week or so
and    I want to order the damn.. stuff and start.
Camera:               Canon XF 100, uses Canon MPEG-2 4:2:2 50Mbps codec
Software:             Adobe Premiere Pro CS5.53
Motherboard:       ASUS P8Z68-V Pro
Question: not to much benchmarks around on the Z68 combined with I 2700. Anyone who uses this board with the 2700 or 2700K step forward please and elaborate.
Cpu:                     intel      core I7 2600
Memory:               16 Gb    Kingston ValueRAM (2x 8 GB : 2 x 4 GB - DIMM 240-pins - DDR3 - 1333 MHz
or
Cpu:                     intel      core I7 2600K
Memory:               16 Gb    Corsair Vengeance Blue 16GB DDR3-1600 CL9 quad kit
Question:               I think I’d go for the first option. It’s cheaper and from what I’ve read there not a lot to gain. My videos mostly don’t exceed 10                               minutes of final footage. Anyone can acknowledge this (or not)?
Videocard:           MSI        N570GTX-M2D12D5/OC
Harddisk:             OCZ       Vertex 3 120GB   (sata 600) for my OS
Harddisk:             S’sung WD Caviar Green WD20EARS x3 (sata 300)
To raid or not to raid is still not clear for me. 5 is definitely a no go
I’m thinking I’d put 2 disks in a Raid 0 for more speed and on a regular base BAckup to the other one( and eventually go for external back-up)
Is that ‘o.k. or mmh’, then fine. Is it a ‘oh no, what is he thinking’, please tell me.
Cooler:                Scythe Mugen                 2 Rev. B
Housing:              Cooler Master Xilencio
Powersupply:       Seasonic 620
Monitor:               Eizo       EV2333WH-BK
Optische drive:     LG          BH10LS30
Cardreader:          lexar     LEXAR PROFESSIONAL USB 3.0 DUAL-SLOT READER (for CF’s canoncamera)
Speakers              Creative              GigaWorks T20 Series II
Special :               Contour Design ShuttlePro2
Thanx guys and girls(?) for hopefully making my life easier. Greeting from Nieuwegein, Utrecht, Holland

Scott,
Referring to your post #8.
JCschild wrote:
i have proven this to be false....
This is a big concern to some of us end users who want to put our money where it counts.
Is there a clear benchmark varifying your actual test results, which us newbies can view?
Referring to your post #10 above.
they are also end users not system builders and do not have the resources/access we have to multiple platforms, processors ram etc.
How can we really know for sure if we go on word of mouth only, one swears by Ford, one swears by Chevy.
What should us newbies believe,
the feedback from end users who have the real world experience of the behaviour of their systems working regularly with large or complex projects, with strict timelines under time pressure, who cannot afford jerkiness nor delay of any kind, who must afford to save a lot of aggravation caused by less responsive systems, who cannot afford to be held back by hard disk failure or loss of data that took valuable time editing, who need lesser time requirements for regular backups, etc, who know what video editing involves in real practice,
or the feedback from system builders who have “the resources/access to multiple platforms, processors ram etc.” to run hardware tests, but who do not have the experience of high end video editing in practice?
Perhaps it is true that a video card running at PCIe-8x is not much slower than a video card running at PCIe-16x.
I don't know for sure.
What will happen if things change, sooner than we thought, with new drivers and CS6 PP utilizing the full bandwidth, and end users are stuck with systems that don't have the required PCI-e lanes to accomodate more than a 16 x PCI-e nVidia card?
It appears to me that the i7-2600K is indeed a great processor, delivering great value for money, for the majority of general-purpose applications, but
how does it perform when one works with large or complex projects, and multitask, such as having DW do a complete validation on multiple DHTML files, including SSE, running a resize action in PS on a couple of thousand images, encoding large files in FL and PR doing an export to a complex long form BRD?
I was very tempted, and came very close, to buying an i7-2600K for myself, but after learning just how much high-end video editing can demand from a system, I became hesitant to buy the i7-2600K with its platform. I need to be sure that the system I buy has no limitations for the work I need to do with it.
If Intel had video editing in mind when designing the i7-2600K, it would not have had integrated graphics, which is of no use when we need a nVidia card.
Regardless of the fact that according to http://www.xbitlabs.com/articles/cpu/display/core-i7-2600k-990x.html the i7-2600K outperformed many pricier products for a higher-end LGA1366 platform (even the $1000 i7-990X Extreme Edition yielding significantly to Core i7-2600K within the majority of general-purpose applications, except during video processing and transcoding, final rendering and a few specific tasks, such as encryption and batch image processing), Intel still positioned this processor as a mid-level processor, for a reason.
Intel knew before release what this mid-level i7-2600K was capable of, therefore releasing it positioned as a mid-level processor, they did so having the architecture to follow up with a mid-level processor that will outperform the i7-2600K, within the same price category, else who would buy Intel's next mid-level processors?
I suspect that for those who are willing to hold out and wait just a bit longer, so they can put their money where it counts, Intel has a pleasant surprise coming soon, and that the new platform will not be evolutionary like it has been for years, but revolutionary with feature improvements from Sandy Bridge like Intel's tri-gate transistor technology, PCI Express 3.0 support and Graphics DirectX 11 and OpenCL support, a bigger graphics performance and bigger CPU performance boost compared to Sandy Bridge.
what makes you think you need a raid controller.... the vast majority of Adobe users do not need one or an 8 drive raid array..
Yes, for those who never need a hardware raid controller, using it for general-purpose applications, the 2600K and its P67 or Z68 platform is nice.
The OP did not specify whether or not he will need a hardware controller, wherefore I cared to post my post #7 above,
nor did he specify his source material, editing style, the nature of his timelines and the time pressure he is under with his projects (other than a mention in his original post of his girlfriend's time request), or how long he intends to use the system before upgrading to the next one.
and why i finally posted the big cup of zip it thread.. to clear out some mis-leading comments.
Scott
ADK
Quoting from your original post in A big cup of "zip it" or the definative final P67 vs X58 answer thread :
Now in all fairless of disclosure the drive benchmarks dropped from our previous tests on X58 which is odd, we are guessing the video card as its ramping up would take bandwidth from the controller even though its supposed to be running 8x.
Scott
ADK
Since you wrote that “the direct replacement for X58 is X79” (System build for CS5.5. Contemplating whether or not to wait for Q1/Q2 2012.), I am eager to learn which exact motherboard(s) was/were used when you ran those previous tests on X58?
Supposing the video card took bandwidth from the controller, even though its supposed to be running 8x, why do you think it would do that as it's ramping up?
Is there a clear benchmark varifying your actual test results, which us newbies can view?

Export Slideshow takes hours

Is there any reason why when I export a slideshow it takes forever? I waited about two hours for one, and it was only a third of the way through.

Welcome to the Apple Discussions.
Let's see:
What processor
How much Ram on your machine?
How big is the HD? How much free space on it?
How many photos in the slideshow?
How big are the photos - pixel dimensions and file size?
WHat template are you using?
What export setting?
Is there music?
There are some of the variables.
Regards
TD

XDCAM 1080i60 with Chroma rendering 30 minute episode take more than 17 hours is it usually?

XDCAM 1080i60 format with Chroma rendering 30 minute episode take more than 17 hours is it usually?

All depends on the system...
If by "Chroma rendering" you mean chroma key rendering then it seems quite slow (but I cut on a hopped up
8X 3.2GHz Mac Pro with a lot of everything, so slow is relative.)
If you mean something like a Magic Bullet Colorista "treatment", that's another story. I've seen that increase renders by as much as 25X the duration, i.e., a 30 minute show might take 12-15 hours on a slow machine.

Why is Mac OS X 10.7 so much slower than Snow Leopard? It isnt smooth, applications are slow and most dont respond, and dowloads take hours, minutes.

Why is Mac OS X 10.7 so much slower than Snow Leopard? It isnt smooth, applications are slow and most dont respond, and dowloads take hours, not minutes.

Something is seriously wrong with your installation or you are critically low on RAM, like below 2 GB.
How much RAM is in your machine?
Have you tried a Recovery?

Is it normal that rendering 18 minutes long 1080p movie takes hours?

Hi
I've got a little question here. Im creating game clips with Premiere Pro.
Is it normal that it takes hours for 18 mins movie?
Spec:
i5 3570k @ 4.2 gHz
MSI GTX 770 OC
16 GB DDR3
1.8TB WD Raid 0

Thanks for the grab, that is helpful, however what codec is the original footage? I see it's an .avi file, but what codec was used, what screen cap app? I notice the source is 1920x1033 and output is 1920x1080, so you're scaling and that takes extra power. I'd recommend editing in a 1920x1080 sequence, and turn off the "Max Render Quality", and also I don't see the purpose of using 2-Pass VBR encoding when Target and Max are the same, just use CBR in that case. These things should reduce render time quite a bit.
You can create a 1920x1080 sequence right now, then Copy/Paste contents of the 1920x1033 sequence into it, then try a CBR export (without Max Render checked)
Thanks
Jeff

Why do rented films take over an hour to buffer?

After a new software update on my Apple TV, rented movies take over an hour to buffer. Everything was fine before the update, so my Internet speed must be ok

Have you checked your internet speed (you can use speedtest.net to do this). Have you considered an issue on your local network, could you be experiencing interference, have you checked for unused wifi channels (you can do this with iStumbler) or tried using another wifi channel.

Exporting 48 minute film takes hours. Could you check my workflow?

Similar Messages

Maybe you are looking for