Exporting a 16:9 sequence always ends up 4:3?

Hi - I use FCE HD and shoot anamorphic 16:9 widescreen. I capture in FCE, and edit it in 16:9 as FCE has corrected identified the clips as widescreen.
However, if I export if to Quicktime Movie then it always loses the anamorphic and comes out at 4:3 (and very thin!)
If i use the Quicktime conversion then i can recreate the correct aspect ratio on some of the exports, but the quality is poor with horizontal lines around moving areas in the content. For other exports such as Apple TV, there is no aspect ratio choice and its the wrong shape again.
The only way round I've found is to dump it back to tape and re import, but there must be an easier way. I'd like to be able to save as Quicktime Movie in widescreen, so that I can directly pop it into Apple TV or onto a DVD in the correct aspect ratio.
What am I doing wrong?
Cheers
Andy

I'm having this same problem. I notice that if I only export a clip, it comes out fine, but if I export the whole sequence, it comes out 4:3. I have quicktime pro so I can get around it, but is there a bug in FCE that is causing this?

Similar Messages

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

Why can't I access the balance in my iTunes account? Why does the process always end up on the credit card page instead of accessing my balance?

Why can't I access the balance in my iTunes account? Why does the process always end up on the credit card page instead of accessing my balance?

Alice Vanderlund wrote:
Why can't I buy more international songs in the U.S. iTunes store??
Because the owners of the songs have not licensed them for sale in the U.S.
Apple doesn't have any say in the matter. it's up to the owner of the distribution rights for the music.

MY IPAD 2 IS STUCK OF AN ITUNES LOGO AND A USB CABLE PICTURE ON SCREEN FOR ONE DAY...EVERYTIME I TRIED TO CONNECT IT TO MY ITUNES IN COMPUTER IT SAYS RECOVERY MODE BUT THEN IT ALWAYS ENDED WITH BEING CORRUPTED!!! PLEASE APPLE FIX THIS...

MY IPAD IS STUCK FOR ALMOST ONE DAY.. LAST NIGHT I TRIED TO INSTALL THE LATEST IS UPDATE WHICH IS IOS 6.1 BUT THEN MY IPAD2 TURNED OFF AND THE ITUNES LOGO AND USB CABLE CAME OUT ON THE SCREEN SO I TRIED TO CONNECT IT TO MY ITUNES ON MY COMPUTER AND IT SAYS RECOVERY MODE SO I CLICKED OK BUT THEN IT ALWAYS END UP CORRUPTED... AND IM CONNECTED TO MY INTERNET 24/7...I JUST DONT KNOW WHAT TO DO...I HOPE APPLEWILL FIX THIS AS OSOON AS POSSIBLE...SO DISAPPOINTED!! PLEASE HELP ANYONE... BEEN TRYING TO RECOVERY MODE OVER 150 TIMES...

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Simple viewer won't export comments and the sequence is wrong

I am stuck....
I have added simple viewer on my site, but the comments of every photo are not there.
- In iphoto i have added the comments with every photo.
- With iphoto export, i made the simple viewer file. Everything works fine accept from the comments they are just not exported.
- Also the sequence of the photo's are different in the simple viewer. It seems like the photo's are displayed (or exported) at random.
Has anyone an idea how I can find a workaround and to get these two issue's solved?

Hi Dhara,
I've been working with Simple Viewer for a couple of weeks now (you can catch my posting and all the replies on the Boards).
Regarding your issues, my recollections are as follows....but, remember I'm a novice and not an expert on this:
1. Comments: Make sure that you check 'Use Comments' in iPhoto Export.
2. Sequence of Photos: I had the same problem with this. I went back to my iPhoto folder and actually changed the file names to 1.jpg, 2.jpg, etc. Then, in iPhoto, I sorted the photos: View, Sort Photos, By Title. I had to move a few manually in the iPhoto display, as numerically sorted some fall out of 'order'. After saving this folder, run iPhoto Export and proceed as you did before.
Again, I am a newbie...so maybe see if some of the 'gurus' on the Boards post a fix as well. And, let me know if this works!
Good luck

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

I have trimmed some R3D flies in Premier Pro and I want to export the trimmed versions in full res to my hard drive, i.e. I want to export the files so that they end up on my hard drive in the same native format. I don't see an option for this in Premier

I have trimmed some R3D flies in Premier Pro and I want to export the trimmed versions in full res to my hard drive, i.e. I want to export the files so that they end up on my hard drive in the same native format. I don’t see an option for this in Premier Pro when I go to export. Any help would be appreciated. Thanks!Premiere Pro

Aperture has the ability to work with files in their existing location. They are called "referenced masters." When you import images, you should select the "In their current location" in the "Store Files:" drop down box. Have a read of the documentation for full specifics. Unsure how you can resolve your duplication; might be some work but next time have a read of the manual first
Information for versions is stored in the Aperture database (library file). The masters can be inside the library file itself, or they can be somewhere else.

Printing inserts - they always end up slightly too small

any suggestions? i'm just using the print command in itunes. but when i cut them out using the guides, they always end up just slightly too small for the jewel cases. is there some page setup thing i need to be aware of?
thanks.

Try increasing the font size in Safari.

Error installing pages numbers keynotes. Always end up with "An error occurred"

error installing pages numbers keynotes. Always end up with "An error occurred".
App store

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Export quicktimes as targa sequence with embedded alpha in HD

I'm receiving some HD Quicktime files tomorrow which I understand have an embedded alpha channel. I need to export them as targa image sequences, which I've never done in FCP before.
Will the alpha remain embedded in the targa sequence?
What TGA option do I choose (eg: million of colors, millions of colors+)?
Will I wind up with "high definition" targas? I understand HD Targas are just giant-sized images, is that right?
Anything else I should be aware of?
thanks

Open the Files in QuickTime Player. No need to use FCP.
File > Export > Movie To Image Sequence > Options > TGA.
Make sure to create a dedicated folder as the destination...

Can data pump handle export/import of a sequence explicitly?

Is it possible to just export/import a database sequence explicitly using data pump.
I know we can export/import sequence by exporting/importing the user in which it is defined.
However I am looking for a way to export/import individual sequnces without having to export/import the entire user.
Thanks

Hi, you can use the INCLUDE clause into expdp command, with this option you can specified the object for the export and import process. You can review the next documentation for more information about this topic.
<br><br>
INCLUDE
<br><br>
Regards.

TS4036 iCloud back up for iPhone just loads an always ends up incomplete

iPhone 4 won't back up to iCloud
Just loads an always ends up incomplete

If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

Premiere crash when i try to export from cineform raw sequence...

Hello!
This is my problem... I'm trying to work with cineform raw files converted from blackmagic CinemaDng footage... but when i put it into a 1080p timeline, premiere pro cs 6 stop working, and if i try to export the 2.5k sequence.
Someone could help me?
Sorry my bad english...

Does it happen with different iMovie projects or does it keep doing it with the same one? Might be a corrupt movie file.
Do you have iLife 11 on disc? If so you might try reinstalling iMovie and try it again, first without updating anything, and if that works then try updating and see if the problem comes back. It could also just be that iMovie is corrupt.

Why can't I export my FCP 6 sequence using Compressor 3?

I am wondering if anyone can tell me why I can't export my FCP 6 sequence using Compressor 3.0.5.
I have an hour-long 1080p Pro Res 422 sequence that I am trying to export using Compressor 3. Whether I export using the 'Pro Res 422' preset or the 'H.264' preset, transcoding commences but then stops abruptly 15 to 20 minutes later with an error message saying 'Quicktime Error: -50.'
For what it's worth, I have an early-2008 dual quad-core Mac Pro desktop with 6 GB of RAM and two ATI Radeon 5770 graphics cards. I am currently running OS X 10.6.8. The media (including Motion graphics) and project file are on an external drive connected via Firewire 800.
Any advice on how to properly export this sequence at the highest quality without getting the error message is greatly appreciated!
Shaun

Are you "sending" to compressor? Probably not the best way to work.
First step: make sure the sequence is COMPLETELY rendered. If you don't understand how to do that, post back.
Then, I'd strongly recommend that you export a quicktime file with current settings (file: export: quicktime movie NOT quicktime conversion) and bring that file into compressor and chose the appropriate preset.
This workflow isolates each step and makes it easier to troubleshoot.
Here are a few user tips that might be helpful
Some tips for using compressor
Common FCP Troubleshooting tips
sending to compressor from fcp - a few issues

My iphone 3g always ended everytime i restore it plz help me

I restore my iphone in itunes but everytime i go in "restoring iphone firmware" it always ended error...plz help me to fix it

Kwonkicker wrote:
I restore my iphone in itunes but everytime ... it always ended error...
And the Error Message is...?

Exporting a 16:9 sequence always ends up 4:3?

Similar Messages

Maybe you are looking for