Exporting a folder using iOS

How can I export a folder using iOS?

Jim Bridger wrote:
Not sure how I can tell if the Library is OK? Library being exported originates on the laptops HD. I export it to an external HD. The Images in the original Library are managed but when I export I select the option to export Previews with the catalog. I then copy the original images over to my main Drobo then reconnect them to the Aperture Library. Both systems are running the most up to date Aperture and Mac OSX software. Thanks for your interest to help.
OK lest see if I got this straight.
The original library is on the laptops internal HD. You connect an external HD to the laptop and export to this external HD connected to the laptop. So at this point you could open that library with Aperture on the laptop.
Images in the original Library are managed but when I export I select the option to export Previews with the catalog. I then copy the original images over to my main Drobo then reconnect them to the Aperture Library.
OK this bit is a got me confused. So the images on the laptop are managed. So then the images in the exported library are also managed, no? But then you say you are copying images to the Drobo and reconnecting them to Aperture. Could you explain this in more detail.
Another thing you can try is to plug in the external HD to your main computer and open the Aperture library from it before you do anything with the Drobo.
BTW it's not the library that is on the Drobo correct, only images?
regards

Similar Messages

Dear friends I mistakenly erased my iphone5 by Find my iphone app. Now I want to recover my pics and videos. In icloud I am not finding any icon folder which used to be there. I am using ios 7. Plz help me what to do. Thanks

Dear friends I mistakenly erased my iphone5 by Find my iphone app. Now I want to recover my pics and videos. In icloud I am not finding any icon folder which used to be there. I am using ios 7. Plz help me what to do. Thanks

Shakirefl wrote:
... I mistakenly erased my iphone5 ...
See How to Restore from a Backup Here...
http://support.apple.com/kb/ht1766

I applied some edits to my photo using iOS 7's default photo editor. It looks great when I preview the image on iPhone, but I cannot export the edited photos onto my PC. Anyone know how can I do this?

I applied some edits to my photo using iOS 7's default photo editor. It looks great when I preview the image on iPhone, but I cannot export the edited photos onto my PC. Anyone know how can I do this?

yeah, in itunes if you select your phone, you should get tabs across the top for what to sync, under photos uncheck the box
EDIT: http://support.apple.com/kb/HT4236 is the link to a apple support document with information on syncing photos using itunes.
Message was edited by: WYSWYG

Export Public Folder contacts to CSV File using Exchange management Shell

Hi All
Is there a command i can run in the exchange management shell to export all public folder contacts (which are in many sub folders) to a CSV file?
Any help on this appreciated.
Ben Weinberg
Prime-Networks
www.prime-networks.co.uk
Please post the resolution to your issue so that everyone can benefit
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hello Ben,
Per my knowledge, you cannot use Exchange Management Shell to export the contacts in public folder to csv file.
If you want to export contacts in public folder to a csv file, you can follow this way to do that:
Open Outlook and create a Temp Contact Folder
Move all the contacts to the Temp Contact Folder
Use Outlook export contacts to csv file .
Thanks,
Evan Liu
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]

I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon it shows I have over 11,000 unread emails. I have no emails and am not receiving any. Ipad shows I am receiving emails ok. Om my phone deleted folder is empty as well as Sent.

I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon in red it shows I have 11,193 emails to be read. I have no mail in Inbox, Drafts, Sent, or Trash. Where did this come from and how do I get rid of it. The number is printed in read on top of the blue and white emaiI icon. I contacted my cable company and through their website I can check my email. In doing this it showed I had 25 unread emails. Also, my iPad 2 is receiving emails fine. So the problem is with the iPhone 4. What can I do to get rid of the number and make my mail operational?

Hello Kizzyk,
I would start with taking a look at the settings to make sure that you are able to send and receive messages. If everything looks good then the next step would be to remove the accounts and add them back in. Take a look at the article below for more information and details on how to troubleshoot your issue further.
Get help with Mail on iPhone, iPad, and iPod touch
http://support.apple.com/en-us/TS3899
Regards,
-Norm G.

Copy Folder with Joins. Export/Import Folder with joins. In EUL.

Ok, I've got a custom folder which has been made up by dragging items from 2 or 3 other folders into it.
It then has some joins of it's own, quite a few.
When trying to create a workbook from it, it takes 9 mins to run a query.
I need to work out what is slowing it down. If I create the same workbook against the folder which has the majority of the items in the custom folder, it runs instantly.
So I suspect it is one of the joins causing it.
My plan was to duplicate the folder, then remove joins until I find out which one is causing it.
However, if I cut n paste the folder, I get a copy without the joins.
If I export the folder and import it I get a copy without the joins.
Question then - how can I get a copy of a folder WITH the joins ?
I'm slightly concerned that when I export my EUL from the dev database and import it into the live database that I'm not going to get any joins since the export and import into the dev database is not retaining the joins.
Anyone ?

Hi,
The preferences for Disco Plus are set in the pref.txt file on the apps server and for Disco Desktop in the Windows Registry. I think the defaults are set on so unless you have changed them this is unlikely to help.
I think I read somewhere that the 11g optimiser will remove unused outer joins or where there is a foreign key constraint. I may have made that last bit up as I cannot find a reference to it, but it may be worth exploring.
To speed things up you could look at why this join is slowing things down. It could be that you need an index on the join column.
The join actually is used, in that it has to check in the other table that a record exists. This is why Discoverer cannot remove the join from the complex folder query. If it did and there where no matching records in the other table then you would get a different result.
Rod West

How do I export a movie using a different format (iMovie 2013)

Title question. I can only seem to export my movie using .mp4 and I've seen on youtube using previous versions of iMovie being able to change the format...
I use a Sony DSC-HX20V to capture my footage which formats the videos in AVCHD and it records in an image quality of 50p. I want to also know how to import these videos onto a 4th generation iPod Touch and which format will support the device better. Thank You.

Although I don't use it myself, saving to Theater creates versions for all sorts of devices including iPod Touches.
iMovie 10 help says:
"When you add a movie, trailer, or clip to the Theater, iMovie creates versions of your movie tailored for local playback (1080p HD), playback on an iOS device (720p HD), and web streaming (480p SD)."
Geoff.

Phonegap to export an App for iOS required mac computer... I have creative cloud cs 6 Dreamweaver...

phonegap to export an App for iOS required mac computer... I have creative cloud cs 6 Dreamweaver....windows...

I am having a very similar problem. I can export it from itunes to my desktop, but when i go to import the project through imovie on my Mac it says that it can not import movies that were created on an IOS app 1.4 or earlier, all though the app i used to create the project is the current. 2.0 is this the same problem you are having?

I noticed that Find My iPhone on iCloud hasn't worked since iOS 8 came out. My device uses iOS 7. My question is: do I need to upgrade my device? If not, what should I do? I do not wish to upgrade my device.

I noticed that Find My iPhone on iCloud hasn't worked since iOS 8 came out. Whenever I try to use it, it always says "All Devices Offline." This is regardless of whether I am in a good Wi-Fi zone or not. I like to use Find My iPhone to remotely track my battery charging status whenever my phone is charging in a different room. That's been really handy, which is why I really need to get this fixed. No matter what computer I use, the problem is always the same.
My device uses iOS 7. My question is: do I need to upgrade my device? If not, what should I do? I do not wish to upgrade my device, especially considering the bad things I've heard about iOS 8.
Feedback would be welcome ASAP.

You don't need to update to iOS 8 to use Find My iPhone. If you haven't already tried, go to Settings>iCloud>Find My iPhone and turn it off, then reset your phone (hold the sleep/wake and home buttons at the same time until you see the Apple logo, then release). After it restarts, turn Find My iPhone back on and see if it works properly now.

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days ago

Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

Can't save files to Last Folder Used

I'm scanning items with a Kodak iQsmart3, running under Kodak's oXYgen 2.6.1 scan application. Late last week, the application suddenly stopped saving files to the last folder used. Now I have to re-select the destination folder for each scan.
I have rebooted the computer several times, and have also re-installed the scan application, but nothing helps the problem. It seems now that the problem may be with OS 10.4.11. I've searched and searched for a solution within the OS, but can't find anything that helps.
Does anyone have a suggestion on how to proceed? Is there a place where you can check to see if the saving options can be changed?

Thanks for your suggestion. However, I did as you advised and still cannot save files to the last folder used, as I used to be able to do.
This is the first time in the 2 1/2 years I've been using this system that I've had any trouble with it. When I opened Disk Utility, it showed me the size and type of three different drives, all identical in manufacture. The first holds the Operating system, and the other two are set up in a Raid Striped set. I selected Macintosh HD under the name of the first drive, since that's the name of the disk on my desktop, and ran the Repair Permissions function, moving the recentitems.plist file to the desktop and rebooting, as per your instructions. Was that the proper area to use or should I have selected the disk description above that?
(Below is the disk information from the Disk Utility application)
Disk Description : Hitachi HDS725050KLA360 Media Total Capacity : 465.8 GB (500,107,862,016 Bytes)
Connection Bus : Serial ATA 2 Write Status : Read/Write
Connection Type : Internal S.M.A.R.T. Status : Verified
Connection ID : "Bay 1" Partition Scheme : GUID Partition Table
(Below is the information on the Macintosh HD folder of that drive.)
Mount Point : / Capacity : 465.4 GB (499,763,888,128 Bytes)
Format : Mac OS Extended (Journaled) Available : 226.2 GB (242,855,989,248 Bytes)
Owners Enabled : Yes Used : 239.3 GB (256,907,898,880 Bytes)
Number of Folders : 133,296 Number of Files : 684,567

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

Creating a workflow to give permissions to a SharePoint folder using Impersonation Step

Hi There,
I have been tasked with creating a workflow in my organise that will allow our users with (Contributor access) to grant people access upon creating a folder in our Shared Documents library.
Currently when our users create a folder, they need to logged a call with site administrators to granted the relevant people access to the folder and its contents.
Is it possible to create a solution that will kick off automatically upon creation of a folder and allow the Creator Only to grant a subset of users permissions to the folder using the Impersonation Step?
Any suggestions would be highly appreciated.
Regards
Tibz
regards Tibz

Hi There
Thank you for your response.
I managed to create a workflow that can be started automatically upon the creation of a folder in my document library. I then added an Impersonation step where I used the "Remove list Item Permissions" & "Add List Item Permissions" actions.
The challenge I am faced with is on the Remove Permissions action, I want to remove all inherited permissions for all existing users and only leave Users with Full Control. Is there a way to select All Existing Users in one function and perhaps
pass that as a "Selected Users" parameter? Currently I have to select the users/groups individually and there are over 100 existing users/groups to choose from.
Any thoughts on how I can work around this?
regards Tibz

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8. Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released. The only path for that iPad 2 is iOS 8.0.2.

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

Exporting a folder using iOS

Similar Messages

Maybe you are looking for