Exporting a sequence with transcoded media (is this possible?)
I'm trying to set up a workflow where I "offline" XDCAM EX footage in Premiere CS6, then export the sequence as an AAF with media transcoded to Avid DNX codec to finish in Avid DS. Is this possible? I know with FCP we would use Automatic Duck and it worked great. Can anyone recommend a similar (or better) workflow in Premiere?
Oh well. That's what I was afraid of
Similar Messages
-
Re-populating a sequence with transcoded clips
I have made a sequence using the pluraleyes plugin and multiclip. This was done using the original HDV footage of 5 camera angles because my system will not cope with 5 streams of 422. I would now like to transcode the relevant clips to 422 to make the final sequence to output using compressor. Is there a way to repopulate the the original HDV sequence with the transcoded clips to avoid having to reconstruct the sequence from EDL data? I am using FCP 6.0.6
cheersDuplicate your sequence and then switch the Sequence Settings >> QuickTime Video Settings >> Compressor to Apple ProRes 422, then Export > Quicktime Movie w/Current Settings ... you have nothing to gain from transcoding your HDV clips into ProRes just to put them back into your timeline now its already cut.
That said, if you are desperate to do this, then you can use the *Media Manager* tool's Recompress option to create a new Apple ProRes 422 copy of your sequence.
Cheers
Andy -
How to export image sequence with a specific number
Hello
I'm looking how, like in after, I can export an image sequence with a starting specific number. I spend hours to rename images with Renamer, boring, stupid!
Thank you for helping
AlexUse Bridge. You can do them all at once with Batch Rename.
-
I work with a child who has physical disability and cannot move his neck. The ipad needs to be eyelevel in order for him to see it, but he also is not able to raise his hand and would need mouse access... is this possible?
I'm sorry but the iPad does not work with a mouse, there is no cursor on the iPad and the iPad was designed as a touch screen device so a mouse will not work.
I really don't know what to suggest other than this new device, and it might be worth a look. I assume that the child can use his hands for a keyboard.
http://www.thinkgeek.com/product/e722/ -
Merging the main partition with free space: is this possible?
Hey all!
My hard drive currently contains two partitions: 200 GB for the Tiger and 30 GB of free space I left when I wasn't yet sure if I will not want to install Linux on it. Now I am sure I won't and I'd like to merge these 30 GB back onto the first partition. Is this possible?
$ diskutil resizeVolume disk0s2 limits
Shows 200 GB is max size for the first partition. Guess then that this won't work:
$ diskutil resizeVolume disk0s2 230G
Any suggestions would be very appreciated!
Artemiy.Although there are utilities available to repartition a hard drive without erasing all data on the drive, I wouldn't trust them and since you need to create or update your backup beforehand anyway to be on the safe side, do so and then reformat the hard drive with the Tiger install package that shipped with your Mac to a single partition. This will erase the hard drive completely first and then re-install OS X and all included software along with any 3rd party software and then re-store your data from the backup.
Or with a backup utility that provides for it, create a bootable clone backup of your 200GB partition saved to an external drive. Reformat the hard drive and then restore everything completely from the bootable clone backup.
When reformatting, be sure to select HFS+ (or extended) with Journaling enabled. -
Problem exporting Quicktime Mov with Premiere / Media Encoder
I have a MOV-file which has been exported from Final Cut. I imported and edited it in Premiere CS 5.5 and then tried to export again to Quicktime Mov. Problem is that the output looks terrible. There is some kind of "Motion bluriness" or fuzziness in the video and looks like there is a maybe "frame rate problem".
Does anyone know what the problem is? I use "real" Quicktime from Apple website.
Here is the information of my Premiere project:
Editing mode: DV PAL
Timebase: 25,00fps
Video Settings
Frame size: 720h 576v (1,4587)
Frame rate: 25,00 frames/second
Pixel Aspect Ratio: D1/DV PAL Widescreen 16:9 (1.4587)
Fields: Lower Field First
Here is the information (Mediainfo) of the original MOV:
Format : MPEG-4
Format_Commercial_IfAny : DVCPRO
Format profile : QuickTime
Codec ID : qt
File size : 2.06 GiB
Duration : 9mn 42s
Overall bit rate : 30.3 Mbps
Encoded date : UTC 2011-08-17 18:12:37
Tagged date : UTC 2011-08-30 17:05:26
Writing library : Apple QuickTime
©TSC : 25
©TSZ : 1
Video
ID : 1
Format : DV
Format_Commercial_IfAny : DVCPRO
Codec ID : dvpp
Codec ID/Hint : DVCPRO
Duration : 9mn 42s
Bit rate mode : Constant
Bit rate : 24.4 Mbps
Width : 703 pixels
Original width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:1:1
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Bottom Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 2.414
Stream size : 1.95 GiB (95%)
Language : English
Encoded date : UTC 2011-08-17 18:12:37
Tagged date : UTC 2011-08-17 18:15:18
And here is the information about exported video:
Format : MPEG-4
Format_Commercial_IfAny : DVCPRO
Format profile : QuickTime
Codec ID : qt
File size : 2.06 GiB
Duration : 9mn 42s
Overall bit rate : 30.3 Mbps
Encoded date : UTC 2011-09-24 19:59:53
Tagged date : UTC 2011-09-24 20:01:56
Writing library : Apple QuickTime
©TIM : 00:00:00:00
©TSC : 25
©TSZ : 1
Video
ID : 1
Format : DV
Format_Commercial_IfAny : DVCPRO
Codec ID : dvcp
Duration : 9mn 42s
Bit rate mode : Constant
Bit rate : 24.4 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 16:9
Original display aspect ratio : 4:3
Frame rate mode : Constant
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Compression mode : Lossy
Bits/(Pixel*Frame) : 2.357
Stream size : 1.95 GiB (95%)
Language : English
Encoded date : UTC 2011-09-24 19:59:53
Tagged date : UTC 2011-09-24 20:01:56
And final information about my computer:
CPU
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
RAM
8.0 GB
OS
Microsoft Windows 7 Service Pack 1 (build 7601), 64-bit (Professional)
Video Card
AMD Radeon HD 6900 SeriesThank you for your answers! I'm so confused about this. It seems to be problem with field orders, but original video is lower field first, my project is lower field first, sequence is lower field first and export is lower field first.
Here is the screenshot of my Sequence settings
And here is Export settings: -
Set CABAC option exporting mp4 h264 with Adobe Media Encoder cc2014
hello everyone!
i would like to be sure that i'm setting an mp4 h264 video with the CABAC option.
in the video settings of the Adobe Media Encoder cc2014 i didn't find this option.
i know that i have to put the profile at Main, and i did! somebody can tell me where i can set or verify that CABAC option in On?
thank you!
pierAME only uses the CABAC option for h.264 so there is no setting to set.
-
Export Image Sequence with Layers Intact
I don't really care if the final format is PSD, TIF, PNG...something else? All I need to be able to do is export my main timeline so that each frame = 1 file, and whatever was on that frame contains the equivalent hierarchy of object frames and child objects that appear for that frame - all with the layers intact in the final file. Seems like it shouldn't actually be that complicated a procedure should it?
I need to be able to create/sketch animatics in Flash to utilize all its unique features like nesting of timelines, then when finished export it for other artists to then take each frame and work with the elements in both photoshop and after effects, cleaning it up with nicer brushes, and creating additional animation and camerawork. Basically Flash is a great way to animate/sketch content and figure out what you're doing, but the others are better for polishing and making it look nice.
Can anyone help with this? If it doesn't exist is it something someone could write a plug-in for?
http://i.imgur.com/q7uyl.jpg
http://i.imgur.com/FgaFe.jpg
http://i.imgur.com/GaAAh.jpgCheck AEnhancers.com! There is a script somewhere there that sets up your million render outputs and enumerates them sequentially.
Mylenium -
"disk full" message? when exporting 60fps sequences with "match sequence settings"?
Hi, I have searched the forums for this subject and found many discussions that went in different directions but no solutions or input from Adobe.
Summarizing,
everything exports well, both directly from PremPro CS6 and from AME (all input files (like 720p or 1080 p .mts AVCHD or .mp4 H264), all sequence settings, all export settings (like H264, 30 fps, 60 fps)
EXCEPT "match sequence settings" for 60 fps 1080p or 720p AVCHD footage, THEN you get the message "Disk full" after 10-20 seconds.
Of course, the disc is not full, there are no applied effects, and it worked well in CS5.5!!
So, Adobe, what can be done about this, no update yet??Hi, Ann
Thanks for the reply.
My cache files are stored on a secondary (7200rpm) 1 TB disc
So are the preview files, render files and the source files, but there are no render or preview files, I just put the footage on the timeline in a "new sequence from clip" (which was AVCHD 1080p 60fps .mts file) and tried to export without editing.
I tried to export to this disc and also to the C: disc but got the same message:"Error compiling movie. Disc Full".
If I made the sequence 30 fps the "match sequence settings" export worked well.
I can export n H264.mp4 format at 60fps but I would like to just trim the clips in the timeline and save them without much loss for later editing. -
Export a sequence with two different framerates
I have shot footage at both 24fps and 50fps and i want to export a short film that will use both 24fps for the "film" look and 50fps for the "video" look. How is that possible?
Not. It is either or.
-
I WOULD LIKE TO BUY AN IPOD TO COLLECT MY FREINDS' PLAYLIST.CAN I CONNECT THE IPOD TO SEVERAL MACS TO TRANSFER THE MUSIC OR ONLY TO ONE AS IT WAS WITH THE FIRST IPOD ??
yes i cant buy addiction to apps and at first i did but with another account,,,so now i sign in with my original account and cant do that any more,,it pops up a masseges that it says "this item is for an app tha was purchased by a different apple id,to buy this item with this apple id,you most first purshase the app....so i dont understan what i have to do!!!!
-
Android development with Air 2.5 with Flash CS4 is this possible?
Can anyone point me where or fill me in on if this is possible which I think it is... I need to figure out how to set up flash cs4 with the AIR 2.5 SDK Because I think it is possible to still build the air app in cs4 and then package it for android using the sdk adt.bat??? Any tutorials or info on this would be great I'm struggling to find any real clear answers everything really mentions cs5 or flash builder... Thanks answers greatly appreciated!!!
This was part of the AIR 2.0 beta release note, but I used this for 2.5 and it works nice.
You can try it too an make sure you use 2.5 wherever the not says 2.0beta2.
Goodluck.
How to Update Flash CS4 to Use the AIR 2 Beta SDK
If you use Flash CS4 Professional to build Adobe AIR applications, please follow the instructions below to manually update the version of the AIR SDK to use version 2.0.
Update Flash CS4 Professional to version 10.0.2 at http://www.adobe.com/support/flash/downloads.html or select "Help > Updates... " from within Flash CS4.
Quit Flash CS4 Professional if it is open.
Navigate to the Flash CS4 installation folder. The default location on Windows is "C:\Program Files\Adobe\Adobe Flash CS4\" and on Mac OS "/Applications/Adobe Flash CS4/"
Within the "Adobe Flash CS4" folder you should see a folder called "AIK1.5". If this folder is not present repeat step #1.
Rename the folder "AIK1.5" to "AIK1.5 OLD" or delete it if you do not need to save a copy of it.
Make a new folder called "AIK1.5"
Download the Adobe AIR 2 SDK from the labs website and uncompress the contents of the folder to the new "AIK1.5" folder you just created.
Copy the "airglobal.swc" file located within the "Adobe Flash CS4/AIK1.5/frameworks/libs/air/" folder into the "Adobe Flash CS4/Common/Configuration/ActionScript 3.0/AIR1.5/" folder.
Flash CS4 is now configured to use the AIR 2 beta 2 SDK.
In order to take advantage of the new AIR 2 beta 2 features, you will need to update your application descriptor file to use the "2.0beta2" namespace. -
Using both iphoto 4 and 6 with same library-is this possible?
I just bought ilife 06 for my desktop computer (g4 400, tiger) but I also have an ibook (g3 500, panther) with iphoto 4 on it.
I have been using iphoto on the ibook, and have a fairly large library.
I would like to share the same library between the two computers, but I'm not sure that this is possible-it seems, from my research, that iphoto 6 uses a different file format, and I'm worried that if I open (or import) the library in iphoto 6, I won't be able to use it in iphoto 4 anymore.
lots of instances of the letter 'i' in this post
thanks
G4 400 AGP Mac OS X (10.4.8)tabla369:
Welcome to the Apple Discussions. Once a library is upgraded to V6 it will to be usable by any previous version of iPhoto. So if you want to have the library on both computers you'll have to copy the V4 to the G4 library and convert it to V6 and run it as V6 and keep the iBook's library at V4. You might be able to connect the two computers together and try to share one library with the other (see iPhoto's preferences). I don't know if both libraries need to be the same version for that type of sharing as I've never done it.
Do you Twango? -
Opening a Java GUI with Matlab? Is this possible?
Hi all,
I'm developing a GUI using Netbeans 5.5 in Java 1.6. The computational power that this GUI interfaces with will be Matlab-based. My problem right now is getting Matlab to recognise my GUI-class. I've added the .jar to Matlabs dynamic classpath but when I try to call a method it is not finding the class at all.
Firstly, I'd just like to verify that what I'm doing IS possible. There exists a way to create a GUI in Netbeans, build it to a .jar, and then access the classes in Matlab so I can open the GUI through Matlab, right?
I've tore through the MatLab site but calling a user-defined class's method is not very well documented ("Just add the .jar to the classpath and call the method using it's full class name" isn't cutting it for me right now.)
ANY help AT ALL would be greatly appreciated. I've dumped hours into what I assume to be a problem with a simple solution.
Thanks
CraigAnd before anyone says "Google" or "check the documentation" I've torn through the MATLAB (mathworks) site and read every page that even mentions Java (beans or otherwise) and I've googled, trust me I've googled.
-
Forward WITH Attachments..Is this possible?
Using Mac Mail, everything seems to be OK, except when i receive an email with attachments (like pictures) and try to forward this email to friends, the attachment is NOT there - i can send the email "AS" an attachment, but that is a pain... shouldn't i be able to simply hit "forward" and the attachments should be in that mail? Is it a simple setting i am missing? Thanks
Steven,
With the original message open, click on Message in the menubar, and choose Send Again. Does the resulting Compose window contain the attachments and message in an expected fashion?
Again with the original message open, click on View in the menubar, place the cursor over Message, and choose Long Headers. Examine the Long Headers -- does it tell you the email client with which the message was prepared and sent?
Ernie
Maybe you are looking for
-
I see some stock in MC.9 for the material code xxxxx 18 kg. but in mmbe it does not show the stock in transit. not also in mb52 & mb5t How I can find out against what sto it is sent in stock in tranit . Data seems to be archieved. Thanks, Kiran
-
I purchased a song on iTunes and it is displayed in my list of SONGS. However, when I try to add to my iPhone 4, it displays with a small circle of dots to the left of the song title and will not play. How do I get this song onto my device?
-
Can't scan from epson workforce 845
I can't scan documents from my epson workforce 845 printer. I use a wireless home network to connect to printer. Printing works fine, but epson software shows communication error when I try to scan.
-
Downloaded Adobe Assistant Now What? Adobe Audition is not automatically downloading
I have installed Adobe Audition and it brings up a screen that says what products are you interested in with a drop down box, however according to instructions it states that the download of adobe audition is supposed to start automatically. Maybe I
-
Carriage return on the portal displays as # on the smartform
Hi, I am creating an invoice through the portal. In the portal I enter three lines of text for billing header text. After each line I hit a ENTER. When I view the invoice the three lines in the header text are displayed allright however when I tr