Exporting a system with NW2004s - r3load option do nothing !

Dear colleagues ,
exporting an ABAP database based on NW2004s on Linux/oracle 10 on linux
suse on IA64 do noting .This export is a part from
unicode conversion for Solution Manager 4.0 - oracle 10.2 , linux suse 9 on IA64 , export phase after unicode nametab phase.Sapinst start and finished all phase in 5 second after input and the final status is export finished successfully .
Any hint is welcome.
Thank ,
Mirel Stanescu

The scope : Unicode conversion Solution Manager 4.0 on Oracle 10.2 on Linux IA64
the manual : Unicode conversion Guide SAP NetWeaver 2004s -SAp basis 7.0 SP11.
The sistem si single page .Made all steps required before export ( SPUMG - all steps including generated nametab ) .the kernel is at latest SP .
Now the step is - perform database export .
All is made like is in System copy system based in SAP NW 2004S SR2 - ABAP
I use the latest IM for NW200s product , choose CRM50 ( or NW200s ) - Ad lyfe cycle -system copy -oracle- based on AS ABAP - export .
After imput phase Sapinst don't generate the files required for export tasks ( STR , etc ) and finish in 5 second state export finished succsesfully .
I really confused because no error appear .
i put from sapinst.log the latest lines
Execute step setTargetDbType of component |NW_Export|ind|ind|ind|ind|0|0.
INFO 2007-05-14 14:13:27
Execute step fillPrePostActionContext of component |NW_Export|ind|ind|ind|ind|0|0.
INFO 2007-05-14 14:13:27
Execute step dialogPreconditions of component |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Pre|ind|ind|ind|ind|3|0.
INFO 2007-05-14 14:13:27
Execute step fillOracleStatisticsContext of component |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Pre|ind|ind|ind|ind|3|0.
INFO 2007-05-14 14:13:27
Execute step fillDB2StatisticsContext of component |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Pre|ind|ind|ind|ind|3|0.
INFO 2007-05-14 14:13:27
Execute step dialogPreconditions of component |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Post|ind|ind|ind|ind|6|0.
INFO 2007-05-14 14:13:27
Execute step fillOracleStatisticsContext of component |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Post|ind|ind|ind|ind|6|0.
INFO 2007-05-14 14:13:27
Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/EXP/summary.html.
INFO 2007-05-14 14:13:32
Execute step createExportTopSubdirs of component |NW_Export|ind|ind|ind|ind|0|0.
INFO 2007-05-14 14:13:32
Authorizations set for /SRS/export/ABAP/DB/ORA/DBSIZE.XML.
INFO 2007-05-14 14:13:32
Execute step createExportTopLabelIndexFile of component |NW_Export|ind|ind|ind|ind|0|0.
INFO 2007-05-14 14:13:32
Removing file /SRS/export/LABELIDX.ASC.
INFO 2007-05-14 14:13:32
Creating file /SRS/export/LABELIDX.ASC.
INFO 2007-05-14 14:13:33
Authorizations set for /SRS/export/LABELIDX.ASC.
INFO 2007-05-14 14:13:33
Authorizations set for /SRS/export/LABELIDX.ASC.
INFO 2007-05-14 14:13:33
Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/EXP/INSTANA.XML.
INFO 2007-05-14 14:13:43
The installation of component Execution of Service SAP NetWeaver 2004s Support Release 2 > Additional Software Life-Cycle Tasks > System Copy > Oracle > Source System > Central System > Based on AS ABAP > Database Instance Export has been completed successfully finished successfully.
INFO 2007-05-14 14:13:43
The installation of component NW_Export|ind|ind|ind|ind finished 14_May_2007_14_13_43 finished successfully.

Similar Messages

Receiving IDocs in XI from a system with Queue Processing option

I am trying to use the Queue Processing option that can be set in a partner profile for IDoc sending, so that qRFC is used.
I have set up the Rule Name as one of the defaults that come with the system, but when I execute the sending of the IDoc, it gets stuck with status 30 (ready for dispatch). I have configured the Output Mode of the IDoc as "Transfer IDoc Immediately".
SAP Documentation states that:
"When you send by qRFC, the IDocs are first put in an outbound queue in the sending system, and then in an inbound queue in the recipient system. You can assign IDocs to various queues and specify queue name rules. "
Is there something I also have to do in the XI system that is receiving the IDoc?
Kind Regards,
Tony.

Hi Anthony,
Now I have the same problem in between ECC6.0 and PI7.11.
If you solving the problem,
Please let us know how you did.
Best Regards,

Created a form in Forms Central. Exported the PDF with Submit Button Option. When the PDF is filled out and submit clicked, it comes back asking for required fields to be filled but they already are. Any Help?

b

Hi;
OK - I can clarify some things and tell you how to do what your looking for.
The desktop FormsCentral application tools are really designed towards create forms that do collect data on FormsCentral servers. You can still easily create PDFs that do not submit data to FormsCentral, but you'll have to add any alternative submit functionality using the Forms tools in Acrobat. You can create a PDF without the submit button in either case, signed in/out of the Desktop Application from the "File" - "Save as PDF Form" menu item. You can then modify the PDF in Acrobat XI Pro by doing a "Save A Copy", when you open the copy you can edit it any way you like, adding a "Submit" button that email's the PDF/Responses back to you...
Here's how: In Acrobat open the PDF you saved from the FormsCentral Desktop application and go to "File" - "Save a Copy" and choose a location, this will remove the security. Open up the copy you just created and you can now edit it, here is a YouTube video tutorial using Acrobat XI, he covers the email button in about two minutes, there are lots of tutorials out there but this one is easy to follow:,
http://www.youtube.com/watch?v=Jql1wp5Gofs
Thanks,
Josh Corey
FormsCentral Team

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8

System copy using R3load ( Export / Import )

Hi,
We are testing System copy using R3load ( Export / Import ) using our production data.
Environment : 46C / Oracle.
while executing export, it takes more than 20 hours, for the data to get exported, we want to reduce the export time drastically. hence, we want to achieve it by scrutinizing the input parameters.
during export, there is a parameter by name splitting the *.STR and *.EXT files for R3load.
the default input for the above parameter is No, do not split STR and EXT files.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
Best Regards
L Raghunahth

Hi
The time of the export depends on the size of your database (and the size of your biggest tables) and your hardware capacity.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
In case you have a few very large tables, and you have multiple cpu's and a decent disk storage, then splitting might significantly reduce the export time.
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
As you did not tell us about your database size and hardware details there is no way to give you anything but very basic metrics. Did you specify a parallel degree at all, was your hardware idling for 20 hrs or fully loaded already?
20 hrs for a 100gb database is very slow. It is reasonable (rather fast in my opinion) for a 2tb database.
Best regards, Michael

How to export movies with Single Field option on with QuickTime Pro?

Hi,
I've got a rather problematic video file with MJPEG encoding in it. I've been able to save the original AVI into another QuickTime mov-file. Where I thought the deinterlace would help me to get rid of the horizontal lines in the picture, that option didn't work this time. Instead, if I use the Single Field option, I get at least a smooth picture.
But when I try to export this to another mov-file or any other format for a smaller file size, I never get the smooth picture to stay. And in the resulting files the interlace "effect" can't be removed even with that single field on again!
I'm using QuickTime Pro 7.6.6.
Anybody with a solution?

Where I thought the deinterlace would help me to get rid of the horizontal lines in the picture, that option didn't work this time. Instead, if I use the Single Field option, I get at least a smooth picture.
It's my understanding that these QT 7 Pro options are "playback only" property settings utilized by the QT Player and do do not have any effect on the export/re-compression of interlaced content. Have you tried exporting directly to a progressive codec option/setting in QT 7 Pro, tried the motion adaptive deinterlacer in MPEG Streamclip (free) or the JES Deinterlacer (free), or used the "decomb" filter option in HandBrake (free) to see if any of these approaches are more suited to your needs?

Installation Options for iMovie HD on Snow Leopard system with iLife '09

Greetings and thank-you for contributing suggestions on what is a well worn subject. I have read many of the posts existing on this topic and am trying to nip some details.
I have a late 2006 iMac that came with Tiger and iMovie HD which is now at version 6.0.3. When I upgraded to Snow Leopard (Boxed Set) I got iLife 09 but, as it was supposed to do, it left me iMovie HD which is what I have used. I have both sets of installation DVD's. (from the iMac and the SL upgrade)
Today I got a new MacMini and am plotting how to get iMovie HD on it.
I gather that I first need to remove iMovie 09 from the Mini. I do that by dragging its application bundle in finder to the trash and removing any receipt packages.
Do I have to remove all of the iLife 09 applications or just iMovie 09?
Then, I reinstall either all of iLife 06 from the iMac DVD or just iMovie HD. After that I can load iLife 09 from the SL DVD. That will leave the iMovie HD on the system but upgrade everything else.
Should I run software update from iMovie HD to try to get the 6.0.3 version or download and run the upgrade image? Does it matter?
I am good to go. Did I miss anything?
I also have a SuperDuper clone of the iMac system. Another possibility is to boot from that and clone it to the new Mini. Does anyone think this is a better idea?
Thanks again for the insights of your experience.

I think the issue is that if you install iMovie 06 on a system with iMovie 09 installed, iMovie 6 has no knowledge that iMovie 09 exists. Therefore iMovie 6 installs itself in the iMovie folder in the Applications Folder and assumes anything in there is old and can be trashed.
Apple fixed this with iMovie 6.04, but this is no longer available.
But if you install iMovie 6 first, and iMovie 9 second, iMovie 9 knows about iMovie 6 and will move it to a folder called "iMovie - Previous Versions".
In your case, I would uninstall iMovie 09 as you started to do, then run the migration assistant, then reinstall iMovie 09.
It should also work to create a folder on your old system called "iMovie - Previous Versions". Drag the iMovie 6 app into this folder and verify that it works. Then do the Migration Assistant. This should work, but I hesitate to recommend it because I have not tested it. Best case, it installs and you did not even have to uninstall iMovie 09. Worst case, delete the iMovie folder and reinstall iMovie 09.
For what its worth, I recently did a Migration Assistant from a SuperDuper clone (after a failed hard disk) that had both iMovie 09 and iMovie 6 installed, and it worked fine. But I have not tried your scenario.
I would use Migration Assistant because then you have the correct version of Snow Leopard for your system. You may not if you use a clone. A new machine may have microcode that is not released to the general release of OSX for several months. If your Mini is a used one and at least 6 months old, a clone should work OK.

Set CABAC option exporting mp4 h264 with Adobe Media Encoder cc2014

hello everyone!
i would like to be sure that i'm setting an mp4 h264 video with the CABAC option.
in the video settings of the Adobe Media Encoder cc2014 i didn't find this option.
i know that i have to put the profile at Main, and i did! somebody can tell me where i can set or verify that CABAC option in On?
thank you!
pier

AME only uses the CABAC option for h.264 so there is no setting to set.

Export for system copy fails - Error 9 (Bad file number)

Hello all,
I am attempting to perform the export phase for a hetergenous system copy on our BI system (BI 7.0 - NW2004s). This system runs on HP-UX 11.11 using Oracle 10.2.0.2 and will be migrated to Windows Server 2003 and MS SQL Server 2005, once the export is complete.
While running sapinst to export the data from the source system, there are several input dialog screens that are skipped, which means I am not able to enter all the paramters used for the export. After seeing this behavior from sapinst, I reviewed the sapinst.log and sapinst_dev.log files and find the warning/error "System call failed. Error 9 (Bad file number)". I have included a portion of these files below.
I have reviewed notes 546006 and 583861, but these seem to refer to an Oracle error ORA-27121, but I am not receiving any Oracle errors in sapinst.log or the Oracle alert log. I have looked for possible permission or ownership problems with any of the SAP or Oracle files, but have not found any that were incorrect. Also, these errors do not specify which file sapinst is having problems with, so I do not have a specific file or area to check.
If anyone has seen something similar to this and has any suggestions, I would greatly appreciate any help.
sapinst.log details:
INFO 2009-02-14 15:15:51.67
Execute step collect of component |NW_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind
|ind|ind|0|0
INFO 2009-02-14 15:15:52.737
Account bwpadm already exists.
WARNING 2009-02-14 15:15:52.747
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.757
Account 0 already exists.
WARNING 2009-02-14 15:15:52.777
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.777
Account 200 already exists.
WARNING 2009-02-14 15:15:52.827
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:16:04.937
Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/ypcat.log.
INFO 2009-02-14 15:16:05.007
Output of ypcat passwd.byname is written to the logfile ypcat.log.
sapinst_dev.log details:
TRACE      2009-02-14 15:15:52.737
2009-02-14 15:15:52.743 NW._getSAPMount() done: /sapmnt
INFO       2009-02-14 15:15:52.737 [syuxcaccmg.cpp:227]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account bwpadm already exists.
TRACE      2009-02-14 15:15:52.747 [syuxcuser.cpp:1943]
           CSyUserImpl_getOsInfos(ILogBook *m_logBook, iastring sName, iastring sID, tSyUserInfo& msUserinfo)
getspnam(bwpadm) returned NULL.
WARNING    2009-02-14 15:15:52.747 [syxxsyshlp.cpp:78]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
Regards,
Rusty Robbins

Hello Peter,
Thanks for the reply. I did confirm the points you made, and have the details below.
1. check filesystem, if you have enough space, especially /tmp
All filesystems have available space, and /tmp has 310 MB available, before the start of sapinst.
2. check again alert log, trace log for Oracle,
I could not find any errors in the alert_SID.log or any unusual trace files.
3. How did you run sapinst? Are you using "root" account.
I am running sapinst as user root and I am following all the recomendations in the system copy guide (at least as far as I can tell. ;p )
We have four BI systems in this landscape, and the other three have migrated successfully. The procedure I am using, is the same as for the other 3 systems and uses the same SAP media directory that was used on the other systems.
One other item that may be part of my problem here, is that this system is the production system, and was originally installed as a high-availability system, using HP-UX Service Guard for clustering. Currently, this system does not have fail-over enabled, but of course the cluster is still intact. One required piece of the Service Guard enviornment is the use of a virtual hostname. This seems to resolve successfully by sapinst, as I see the correct (virtual) hostname referenced several times. While this is a clustered system (for fail-over purposes), the CI and DB are installed on the same host. So it is not a distributed system, and if failover had been initiated, it would fail both the CI and DB instance, which is the same and only SAP instance.
This did raise one question in my mind, however. I am attempting to extract this using the following menu path within sapinst.
SAP NetWeaver 7.0 Support Release 3 --> Software Life-Cycle Options --> System Copy --> Oracle --> Source System Export --> Central System --> Based on AS ABAP and AS Java
Since this does use Service Guard, but is not a distributed system, should I be using a different path in the sapinst tree, for the export? I have only performed a migration using the above path, so I am not familar with the detailf of the other types, such as High-Availabitly or Distributed-System.
Regards,
Rusty

Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, Polina

Hi Manoj, 
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ 
1) std_server0.out is in the condition before the system copy, no new data was written there. 
2)dev_disp 
DpJ2eeStart: j2ee state = STARTED 
DpJ2eeLogin: j2ee state = CONNECTED 
Fri Feb 26 12:58:04 2010 
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212] 
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Fri Feb 26 12:58:20 2010 
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN 
Fri Feb 26 12:57:20 2010 
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207] 
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214] 
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]
It seems that java is trying to start but something goes wrong and it have to shut down
3)dev_bootstrap 
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66) 
[Thr 1086335296] ********************************************************************** 
ERROR => The Java VM terminated with a non-zero exit code. 
Please see SAP Note 943602 , section 'J2EE Engine exit codes' 
for additional information and trouble shooting. 
********************************************************************** 
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17 
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)
4) jvm_bootstrap.out 
... 
Exception occurred: 
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
.. 
Exception occurred: 
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties! 
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476) 
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146) 
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties! 
[Bootstrap module]> Problem occurred while performing synchronization.
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...
Thanks in advance. 
Regards, 
Polina

Can't export MPEG-2 with alpha matte

Can't export an .mpeg 2 with an alpha from after effects using media encoder. Is there a way to do this? The editor I am working with only accepts MPEG 2 for his lower thirds.
Unfortunately I do not have a choice of formats and have to export MPEG 2 with an alpha. Easy enough with QuickTime and .Avi but have not seen an option with MPEG 2 in either after effects or encoder.

No prob's
1. Ensure that compressor is installed on your system.
2. Export the sequence as a Quicktime movie using sequence settings.
3. Launch compressor and bring your exported sequnce in, now you can apply one of the presets and, over time, read the manual and understand all of the subtleties of compression.
Tony

Homogeneous System copy - NW2004s

I am trying to perform a homogeneous system copy of NW2004s ECC6 system using sapinst.
Platform info:
OS - HPUX
DB - Oracle
I am using DB specific (oracle) method to restore an offline backup.
When I run the sapinst to import, I get past preliminary information screens and when I select "Homogeneous System Copy (backup/restore)", I am prompted for the location of LABEL.ASC for the migration.
The documentation in the guide "Homogeneous System Copy of NW2004s" is poor and does not address this issue.
I suspect there is a bug in sapinst.
Has anyone come across this issue before?
Thanks,
Sai

Steps for homogeneus copy :
1. Export of source system using sapinst ( R3load )
2. transfer the file over to target system
3. Do new installation of he system by using the transfered file as you export file.
I gues the menu in sapinst would be additional lifecycle task .

SLD - Export Business System: 404 Not found while downloading ZIP-File

Hi, well we did a complete export of SLD to another XI-System. This worked fine so far except that one business System was not properly "installed" in SLD.
Therefore we want to export this single business system via option "Export" but we receive an 404 Error: The requested resource does not exist. when trying to download the given zip-file!
I read in OSS that this error occurs in XI-systems with SP <12 and SAP suggest to upgrade to 12
Well that's not an appropriate solution!
Does somebody can help how we can download this zip-file with the business system in it?!
Or is there some workaround i am not familiar with?!
Thx in advance!

Ok Prateek,
we had two same Technical Systems with two differnet hosts given in the SLD of DEV & PROD System.
After decision to devide both systems, means to seperate SLDs we copied the whole SLD from DEV to PROD. So there were some conflict with this two technical systems because during import of CIM-Data the business systems got switched up.
Therefore we thought we have to export the business system given in DEV SLD to import this business system in PROD SLD. But the workaround is that we simply assign the wrong imported business system to the right technical system (in PROD SLD)
That's it! br

Exporting LOGON trigger with per schema filtering

I am using the datapump on 10.2g (on linux) to export three schemas. I am using the "SCHEMA" option in the dbms_datapump.open() procedure and then using the metadata_filter with the SCHEMA_EXPR option to limit down to my three schema. I also do some data filtering after that. Works great, except...
I found that we have one LOGON trigger which is NOT getting exported. The trigger IS owned by one of the schemas i am exporting. But, I think that because this is a "system event trigger", rather than a table based trigger, it will not export using the SCHEMA export mode. True ?
I tried switching to the FULL export mode, but then I can not find a way to limit the export to the three schemas.
All the exporting/importing is being done as system, so I don't think this is a priveledge issue.
Ideas? How to datapump specific schemas and also get the system event triggers owned by those schemas ?
Thanks very much for your help.
Bill Clery

Sure. Here is the trigger that is NOT exporting as part of the Schema export. We have a Schema called ReportView. In that schema are many views, one table, one package, and one trigger (below). Everything except the trigger is getting exported and then imported.
CREATE OR REPLACE TRIGGER reportview.startsess AFTER LOGON ON reportview.SCHEMA
BEGIN
reportview.reportapi.AutoLoadPIT();
END startsess;
The initiation of the export was done like this
PumpHandle := dbms_datapump.open('EXPORT','SCHEMA',NULL, JobName,'LATEST');
dbms_datapump.set_parallel(PumpHandle, 1);
dbms_datapump.metadata_filter(PumpHandle, 'SCHEMA_EXPR', 'IN (''ERIKSYSCORE'',''RBSAPPCORE'',''REPORTVIEW'')');
dbms_datapump.add_file(...)
dbms_datapump.data_filter(...)
dbms_datapump.data_filter(...)
dbms_datapump.start_job(PumpHandle);
dbms_datapump.detach(PumpHandle);
I tried swtiching to the "FULL" method and using the NAME_EXPR to filter down to the same schemas, but could not get this working.
PumpHandle := dbms_datapump.open('EXPORT','FULL',NULL, JobName,'LATEST');
dbms_datapump.set_parallel(PumpHandle, 1);
dbms_datapump.metadata_filter(PumpHandle, 'NAME_EXPR', ???? );

Can't export to AIR with Windows Style as Custom Chrome (transparent)

I can export to AIR with Xcelsius SP1 and FP1 as long as the Windows Style is set to either System Chrome or Custom Chrome (Opaque). However, if I choose Custom Chrome (transparent), it does not generate the AIR file but also does not create an error.
I had the network connectivity issue talked about in other threads so I could not export at all before but resolved that by taking my laptop home and exporting here. Now it works except for exporting to transparent.
Versions installed with correct paths:
FLEX SDK: 3.2
JRE: 1.6.0_07
AIR: 1.5

>
Andy Brathwaite wrote:
> Alan.
> We still don't have a solution for this.
> It's been marked as bug and been investigated without success.
> For now just don't use that option. Sorry.
Andy,
I'm also beginning to have this issue but it's new to me as I had to set up a new machine today. It has Xcelsius '08 SP1/FP1, Flex SDK 3.3 and J2RE 1.4.2.19. I've previously been able to export using the Custom chrome (transparent) option but I haven't been able to make a thorough examination of the two machines. One major difference is that the machine having the issue is a VM while the other is not. I did a little digging around and found this post on another forum. By the date on the post, this is a rather old problem.
iguanasterix - Wed Nov 26, 2008 7:40 am
Post subject: XCelsius 2008 - Exporting to AIR Hi, I just wanted to share a problem we've experienced when exporting our Xcelsius dashboards to Adobe AIR.
These are the symptoms: when exporting to air format, Xcelsius doesn't generate the .air package. We can see that Xcelsius generates some temporary files (swf, xml, tmp) but then deletes the files and does nothing.
To validate if the problem was on Xcelsius or on the AIR SDK we tried to manually generate the .air package by using the AIR SDK and the adt command, and received this error message:
"Could not generate timestamp: Connection timed out: connect"
One of the steps AIR SDK follows when generating an .air package is to contact a time-stamp server. If the AIR SDK fails to contact the tsa, no package will be generated and an error message similar to this one will be sent.
To validate if this was the cause of the problem, we executed adt and added the -tsa none (to skip the time-stamp validation) and everything seems to work. Unfortunately we can't add this setting when exporting from Xcelsius 2008.
We are connecting to the internet using a proxy server.
If we try to export while connected to another network (no proxy) the export is executed with no problems.
Although we've changed our JRE settings to use the company's proxy we still can't Export to AIR while connected to this network.
Any ideas of how we could fix this?
It would be nice if Xcelsius could display an error message when experiencing problems with the AIR SDK instead of doing nothing at all.
I have not yet been able to verify the above information but maybe it will help you guys. If you need more information from me, let me know. I'm going to do some more testing tomorrow and will post any results I find. I really really need this option to work.
Sean

Exporting a system with NW2004s - r3load option do nothing !

Similar Messages

Maybe you are looking for