Exporting a video from 550x400 to HD?

I've got a flash movie with the standard, low pixels 550 x 400.  I want to export a video that's 1920x1080.   How can I do this?
The flash movie is extremely complicated with all sorts of layers and such.  The only way I can think of doing it is selecting all the frames and converting to a Movie Symbol, then resizing the document size and resizing the symbol. However, I tried this in the past (with past versions of flash) and it caused some problems with the effects of the movie symbols within the big movie symbol. 
Is there a better way to do it, or is the way I mentioned the only way?  Has the newer versions of flash fixed this issue?
Thanks!

You will be changing the aspect ratio and the size of the original pixels when you enlarge this movie. Both of those alterations will adversely affect the final movie. You may get a slightly better final product if you export the flash movie at its native size and then make the changes to the size and aspect ratio in video application.
The best solution is to make your original flash file with the stage set to the final size that you want for your finished product.

Similar Messages

  • How do I export a video from my iPhone to a friends computer?

    How do I export a video from my iPhone to a friends computer?

    Same as you would from any digital camera:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • Exporting HD Video From Final Cut Express HD

    When attempting to export HD video from Final Cut Express using "uncompressed" setting, I notice that the output quality seems to be limited to "medium." If no compression is used, wouldn't that imply that the video quality should equal original footage?

    All FCE Timelines are using the AIC (Apple Intermediate Codec) for HD stuff if you selected the correct Easy Setup before you started your Project.
    If you export as a Quicktime Movie then you are getting exactly the same export quality as the Timeline.
    The Quicktime Movie can be either Self-Contained or a Reference file. Reference Files are great because they use/reference you exisating captured files on your Scratch Disc, use less space and export fast.
    However if you need to play the export somewhere other than your Mac your will require the file to be Self-Contained.
    QuickTime Conversion does just that, Converts to whatever you select.
    Al

  • Exporting a Video from final cut express and uploading to vimeo

    I film with a Sony FX-7 in 1080HDV and would like to know the specific settings of how I should export my video from Final Cut Express to vimeo to be played in HD mode on a vimeo account.

    I looked that link up but my video seems to be running pretty slow, here's the link to the vid http://vimeo.com/20580561
    Do u have any advice on what I should change for the settings?

  • When i export a video from iMovie the sound goes distorted?

    When i export a video from iMovie to my camera roll or to youtube the music i've added sounds distorted. When i watch it in iMovie it sounds fine. Any idea how i can solve this problem.
    Many thanks

    Yes, I experience this same problem. The grey doesn't show up until after it is uploaded to Youtube...

  • I'm having this message when I try to export my video from Premiere Pro:  "Error compiling movie. Unknown error"

    I'm having this message when i try to export my video from Premiere Pro:
    "Error compiling movie. Unknown error" Do anybody knows what to do?

    1st, I moved your message to the correct forum
    2nd, More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    3rd, Error Compiling Movie... some past discussions and ideas
    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
    -http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
    -and nested sequences http://forums.adobe.com/thread/955172
    -and WMV files frame rate http://forums.adobe.com/message/4629210

  • Exported my video from Elements 12 but Powerpoint does not recognise the video file. How can we do it?

    Exported my video from Elements 12 - format mp4 but Powerpoint does NOT recognise the video file. Why?

    .wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
    If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest.

  • Can't export older videos from iPhoto

    Hiya, I hope someone can help me out here.
    My wife and I have a few years worth of videos that were taken on digital cameras and were imported into iPhoto. The videos from the past few years were taken on our iPhones, but the older videos were imported from our old digital camera. All of our videos play correctly within iPhoto. But I recently tried to export my videos from iPhoto, and the older videos do not play. They are very short - usually about 10K to 500K, and they are zero length. When you press play they just immediately skip to the end. It's almost like they are a photo. This happens in iMovie and when I try to play the video directly out of the finder.
    Now, I did my homework on exporting and made sure to chose 'Original'. And all of the exported videos from the past three years (the iPhone videos) or so work just fine. So I don't think I messed up my iPhoto export somehow. Another interesting wrinkle is that I can choose 'locate in finder' for the older videos and find the movie that way and it plays just fine. These videos in the iPhoto library are also the correct size - 10M or so. So I suppose that if worst comes to worst I can just manually copy every single video. But I'd like for the export process to work.
    Any ideas?
    Thanks!
    Justin

    If you want to find all videos/movies very quickly in iPhoto create a Smart Album with the criteria:  Photo is Movie.

  • After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

    after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • HT4101 How do I export a video from Ipad to SD card with camera connection kit?

    How do I export a video from Ipad 2 to SD card with the camera connection kit? I shot some video on iPad that I want to transfer without using PC connection. Thanks!

    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
    Copy Photos (& Videos) Between iOS Devices
    http://tinyurl.com/cnz95bc
     Cheers, Tom

  • How do I export a video from After Effects CC to an iPhone? I'm using a PC.

    How do I export a video from After Effects CC to an iPhone? I'm using a PC.

    Short answer, there is no simple "export to iPhone", but if you just want to have a movie that you can watch on you iPhone, just send yourself an attachment via email (other than .avi) and save it to your phone.
    You can also use dropbox as an option.
    With an app, you could mount your iPhone as an external drive. (check out iExplorer)
    Also: check AME for h264 variations before you send it to yourself.  There are presets for iPhone compression.

  • What compression to use when Exporting HD video from final cut pro PAL setting

    Hi there
    I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
    Any advice greatly appreciated!
    thanks

    Just to add two suggestions.
    1) Consider putting your four movies on two disks.
    2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
    Russ

  • Exporting HD video from FCE to iDVD

    I'm finishing my first project with Final Cut Express and want to be sure I'm exporting my video correctly for iDVD.
    I imported my NTSC 1080i video to FCE using the Apple Intermediate Codec 60-frame interlaced setting. Edited the video and it looks good.
    I've rendered the video and mixed down the audio. I then exported a QuickTime reference .mov file and added that to my iDVD project.
    When I look at the preview of the movie in iDVD I'm seeing a lot of interlacing lines. Ouch! Will this burn OK or am I in trouble? When I watch the reference movie on my computer it looks fine with no interlacing problem. I'll be making a test burn this evening but the suspense is killing me!
    Every reference I've found says to do this just as I've done. Did I miss a step? Is there something else I should do for HD material? Should I use QuickTime Conversion in FCE to make a standard def 16x9 movie and use that for iDVD?
    I've made lots of DVDs from HD material in iMovie and never had a problem.
    Thanks for your help!

    Not sure about what settings to use, but wanted to remind you that iDVD has a Save As Disc Image option which creates a virtual DVD on your desktop. You can mount and play this on your Mac just like an actual DVD (using DVD Player). So it's a cheap and precise way of previewing your video in standard DVD format.
    You'd Copy the disc image to actual media using Roxio Toast or Apple's Disk Utility. The only differences between the two videos would be the result of viewing on a different monitor/TV, or errors introduced during the copy/burn process (typically bad disks or bad quality disks).
    John

  • How can i export lossless video from FCP for Episode Pro?

    Hi,
    i am looking for a way to export videos from Final Cut Pro in order to use it in Episode Pro for further converting.
    I know i xould use Compressor an just import the Episode settings into Compressor, but that's gonna obstruct my workflow and - to be honest - i hate Compressor.
    So what video format is the best for this kind of project?
    Thanks,
    Heidi

    Hideous Heidi wrote:
    If i do it like David says the titles are displayed with different fonts.
    Unfortunately the source material is on an external Drive connected via Firewire 800 to a mac in the office next to mine. Our macs are connectet via gigabit ethernet.
    Something doesn't sound right.
    First, If you render the Sequence before exporting it for Episode, it should not matter whether or where the fonts are installed. Are you sure everything is rendered?
    Second, are actually saying that your are editing material in your Final Cut timeline that is coming in over a network connection in another office? You must spend an awful lot of time, drumming your fingers on the desk!
    We export everything we do to Episode for conversion to Flash. It just works.

  • Exporting HD video from FCE

    Hi,
    What would be the best process from the point of export (in what video format) to actually burning an HD DVD when exporting from FCE 4.0 without losing quality?
    I have -
    DVDSP 4.0
    Compressor 2.0
    IDVD 7.0
    MacBook Pro Intel

    CAn I export a Video captured and assembled in HD to a standard definition so it will fit on a normal >DVD?
    Yes.
    How to burn to a DVD with chapters etc?
    You enter Chapter Markers into an FCE Timeline.
    Try a search for details. Here's one;
    http://discussions.apple.com/thread.jspa?messageID=6597003&#6597003
    You have to export the FCE Timeline using File >Export>QuickTime Movie.
    If the Timeline is under 2 hours (single side, single layer DVD) it will work in iDVD with the correct settings entered in iDVD
    iDVD also has to be configured to accept chapter markers.
    Al

Maybe you are looking for

  • Custom button ALV to download data to excel and word.

    Hai Experts,    I have a requirement in which i need to add a button on the alv tool bar     which has the functionality of downloading the data in the alv to     word/excel/notepad..   i got the prcedure to download the data but my problemis how to

  • Trade-offs of different Immutability designs

    Hi, I'm wondering what the trade-offs are for the following immutability designs: 1) Object composition: a mutable class wraps an immutable class without any sort of inheritance. Example: String vs StringBuilder. 2) Single interface with optional ope

  • Dynamic updates in dropdown field using presentation

    My requirement is as follows: 1)     Combination of text box & dropdown in the presentation. 2)     Dropdown is dependent on the text box. 3)     If user will enter the two characters in the text box then automatically drop down will be fill the list

  • Has anyone configured NT realm in 8.1?

    Hi there, Our client currently using Windows NT Server, would like to see if use the NT realm for WebLogic Server 8.1 and then further for WebLogic Portal 8.1. I have gone through the steps in http://edocs.bea.com/wls/docs81/ConsoleHelp/security_6x.h

  • APEX integration with EBS R12.1.1 - no SSO

    I am trying to complete APEX integration with EBS R12.1.1 in simplest way. I have a non authenticated report page that I need to link to through a menu and function on one of the existing forms. Rod West document http://www.oracle.com/technetwork/dev