Exporting After Effects CS5 to Premiere Pro CS5

I need some help.
this is the first itme I have used After Effects.
after finishing adding the effects to my comp i wanted to export it.
i want to export it as a video not a flash.
so i chose export to premiere pro.
then when i went to open it i got an error it said "the editing mode used by the sequence could not be opened. the sequence will be opened in Desktop mode" and i clicked ok.
then i got the second error "(file path) Video Filter missing: AE.ADBE ripple and Video Filter missing: AE.ADBE Samuari" and the only option was ok.
after that it opened and i went to drag my comp into the editing window and nothing came up.
i pre-edited my comp so all i have to do is export it as a video file.
what should i do?
can anyone put me onto a good tutorial about how to succesfully export from CS5 to premiere pro because the only ones i could find were for CS4.

See this page for an overview of rendering and exporting.
Start here to learn After Effects.

Similar Messages

After Effects AND/OR Premiere Pro CS5 ?

Hi guys,
I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there. So I hope I can use AE to improve my videos.
My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
If I choose AE for the project, will I miss some functions from Premiere Pro?
Many thanks in advance !
Sven

Thank you guys!
You put me on track, expecially with the link!
From beginning I am just taking care of old videos that noone look at because not edited so most of the time just crap.
I want to edit them, try to improve color and sharpness but also add some funny elements so they are more interesting to watch.
I have 30 videos from my daughter, each 1 hour and 8 of my own (really crap) and 8 VHS from a friend. That is just to start with.
Start Adobe Premiere Pro from within After Effects and capture footage for use in After Effects. (See Use Adobe Premiere Pro for capture (Production Premium and Master Collection only).)
Use Adobe Dynamic Link to work with After Effects compositions in Adobe Premiere Pro without first rendering them. A dynamically linked composition appears as a clip in Adobe Premiere Pro.
Use Adobe Dynamic Link to work with Adobe Premiere Pro sequences in After Effects without first rendering them. A dynamically linked sequence appears as a footage item in After Effects.
Start After Effects from within Premiere Pro and create a new composition with settings that match the settings of your Premiere Pro project.
Select a set of clips in Adobe Premiere Pro and convert them to a composition in After Effects. "
So with a testvideo I will start using these 5 different methods so I learn when to use which one!
And I also have 4-5 videolessons to watch.
Thanks again!
I probably be back soon with more questions!

Fix for crash in After Effects CS5 and Premiere Pro CS5 when Joesoft Hear audio enhancer installed

After Effects CS5 and Premiere Pro CS5 both can crash due to a conflict with the Joesoft Hear audio enhancer.
We've just gotten confirmation from Joesoft that they've released a beta version of Hear that doesn't conflict with After Effects CS5 and Premiere Pro CS5. We're recommending that our customers who also use Hear install the 1.0.5b2 (build 490) beta version of Hear.
Let us know on this forum thread whether this solution works for you. We on the After Effects and Premiere Pro teams will monitor this thread for feedback, and we'll make sure that the folks at Joesoft get the information that they need, too.
When reporting back, be sure to let us know whether you've installed the Premiere Pro CS5 (5.0.2) update and After Effects CS5 (10.0.1) update.

After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message. Updating Hear definitely solves the problem!

Options for exporting a project in Adobe premiere Pro CS5.5

When Exporting a project from Adobe premiere Pro CS5.5 I use the format of Windows Media file and Preset HDTV 1080P 30 HighQuality. At the bottom of the window there are some options that say "Use Maximum Render Quality" And "Use Frame Blending". I used these two options on my first video I exported but I want to know for the future what both of these options do exactly to my film and if they could adversely effect things like lighting and the frame rate of a clip or anything?

Max Render Quality does what is says: gives better picture quality, but will lengthen the export process.
Frame Blending you check when output framerate differs from timeline framerate.

After effect et première pro CS5.5

Bonjour,
j'ai installé la version d'essai d'after effect et première pro CS5.5. Dans After j'ai importé une petite vidéo de 12.15 s, faite avec mon appareil photo . dessus j'ai fait la même chose que dans le tutoriel d'adobe tv intitulé "utilisation de l'outil roto-pinceau. j'ai fais le même parcours, la seule différence est que quand je fais une prévisualisation ça mets du temps à refaire chaque image par image, même après avoir figé le roto pinceau. c'est vrai que sur ma vidéo j'ai beaucoup plus d'intervention que dans le tutoriel, mais bon après avoir enregistré mon projet, je vais dans dans première pro, j'importe mon projet after, et là pas moyen de lire ma vidéo. j'ai la prmière image puis ça passe à celle du milieu puis à celle de fin. j'ai passé des heures dessus et je voudrais que ce ne soit pas en vain. peut être ai je mal choisi le type de composition, mais pour être honnête, je ne sais pas trop ce qu'il faut choisir car il y en a tellement. quelqu'un pourrait il m'aider ? j'aimerai pouvoir faire mon projet avant la fin de l'essai.
merci d'avance

Bonjour Pierre, C'est par hasard mais avec plaisir que je lis ta réponse à Quinou presque deux ans plus tard!!!
Des sous-titres c'est toujours mieux que l'anglais même si ce n'est pas commode de lire, essayer de comprendre et regarder en même temps le déroulé du tuto. En cas de réel besoin, c'est toujours très utile d'avoir un tuto sous-titré à défaut de traduction orale.
C'est l'occasion de remercier tous ceux qui sur ce forum apportent leur aide aux utilisateurs qui a un moment ou l'autre risquent de tomber dans le désespoir absolu que se soit par leur manque de connaissances ou problèmes divers réels ou supposés des logiciels.

Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

I just updated my After Effects and Premiere Pro to CC and since doing so I've found numerous performance issues. One that is seriously hurting my workflow is the poor performance of the dynamic link with After Effects compositions into Premiere Pro. In CS6, you could make a change to the AE composition, save it, click over to Premiere Pro and it would quickly update and you can play your timeline and preview your changes. You could also move the clips around and add cross dissolves and watch the changes quickly in Premiere Pro CS6. Now, since updating to CC, if you save the composition in AE and click over to Premiere Pro it won't update on its own. Sometimes it just shows a single frame of the AE composition. I found that if you right click and "Edit Original", go into AE and then click back over to Premiere Pro and it will finally update. But if you make any changes to the placement of the AE composition on the timeline, or add a cross dissolve, fade, etc. it again won't play the AE composition any longer. After you make any changes to the AE composition you have to right click and go to "Edit Original", go into AE, and then click back over to Premiere Pro.. Then it will finally update.
iMac
Quad Core 3.4GHz
32G RAM
OS X Mavericks

Thanks Kevin.
Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

After Effects and Adobe Premiere Pro

I thought After Effects and Adobe Premiere Pro were part of the cloud. Neither appeared in the download manager and I'm not able to install.

This question gets asked a lot because, rather than putting a simple, clear explanatory note into the Application Manager, Adobe confusingly opted to simply omit apps not supported by your operating system from the download screen thereby leaving users such as yourself bewildered as to why those apps are not available for you for download.
Many people often think their Application Manager is somehow broken or corrupted.
I take it that you're running Windows XP 32 bit or Windows 7 32 bit?
Neither will run PP or AE unfortunately so those apps are not available for you to download.
64 bit operating systems only.

After Effects project into Premiere Pro

I am having trouble importing my After Effects project into Premiere. It isn't playing once I bring it in to my premiere.

What versions of After Effects and Premiere Pro? What operating system? What kinds of source footage?
What exactly are you doing? What menu commands are you choosing, and what things are you clicking, and in what order?
Here is a page that describes ways to move things from After Effects and Premiere Pro and vice versa:
"Working with Premiere Pro and After Effects
There are many ways to move things between these applications, but importing an After Effects project into Premiere Pro is not one of them, so I'm confused by your issue as you've stated it.

Exporting AE animated signature to Premiere Pro CS5 project

Hi everyone, I created a wonderful animated signature in After Effects CS5 and within Premiere Pro CS5 I imported the AE composition and added it to my initial video, but unfortunately while the animation works fine, the signature has a white rectangular back ground which I failed to make it transparent to show the animated signature only over the video. I would appreciate very much helping me to do that task. Thank you in advance. You are great.

Thank you Rick for your kind prompt response, I appreciate your time. I usually solve all the technical problems I face through my classroom in a book series, or by watching experts videos
but this one I couldn't figure out correctly anywhere, sorry about that. The steps I followed are as follows:
1) I scanned a handwritten signature and I saved as a TIF image
2) I imported the above mentioned image in Adobe After Effects
3) I used the pen tool to mask the signature
4) I created a white solid composition
5) I copied the masks to the White solid composition.
6) I copied the white solid masks to a new video composition with same size of my Premiere pro project 1920x1080 and I started to amend the brush size, hardness...etc under stroke
7) I made the end of the stroke feature to be 0% at the start
8) After 3 sec. I made the end comes back to 100%
9) I checked the animation of the signature and it was great, I made the length of the composition becomes 20 sec in length to match the handwriting natural speed
10) I resized the composition to show a size of my signature which does not exceed a 10% of the quarter of the right corner of my video I opened the Premiere Pro and imported the compostion
11) The composition showed an animated signature in Premiere Pro but with a white background which I failed to make it transparent.
Thank you once more.

Creative Wedding Transitions & Effects for Adobe Premiere Pro CS5 or CS5.5

Hi!
I am Professional Wedding Video Editor. before that i was using Pinnacle Studio 14 and Canopus Edius Pro but these Sucks, Now i have Intel Core i7 Extreme 64 bit OS and using Windows 7. I just Buye the Adobe Creative Suite 5. and soon i will Upgrade to Adobe CS5.5 . this is the Great Video Editing Software i Ever Seen. But i found some standard Dissolve & wipe Transitions in it.
My Question is that can i Use 3rd Party Creative Video Effects & Transitions with Adobe Premiere Pro CS5?
i want to know about thier names. that has Great transitions and smooth Transitions ever.
Thanks
Looking forward for Great Response.
Regards,
Waseem

Once, one could use the Hollywood FX Transitions (available from Pinnacle), but I believe that as of about CS4, that is no longer possible, but since Zac did not mention it (also, I think that Pinnacle no longer works with Hollywood FX, and they might be history?), I assume that CS5/CS5.5 does not support them either.
Pixelan (mentioned above) is a great resource for Transitons, and I recommed them highly.
I also have ProDAD's Adorage, but do not use those that often.
My normal Transitions are just Butt-cut, Cross-Dissolve and Dip-to-Black.
Good luck,
Hunt

After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

Problem:
After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden. Around 5 minutes to get to/by the intro dialogue box. For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up). This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe. Premiere is not much different. It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs. It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well. As soon as I kill the Afterfx.exe process, they come back to life.
I have read nearly all threads on the subject, and am struggling to find a solution:
Deleted preferences folder under my username's appdata.
Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
ran windows system file checker/malwarebytes/rkill/rootkit detection.
checked for windows compatibility checkboxes under the file.
Uninstalled Wacom Tablet drivers
Disabled Aero
Started with ctrl-alt-shift to delete pref.
uninstalled video driver and replaced with one 6 months ago.
uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
moved plugins folder
moved opengl's plugin out of the folder temporarily
Disabled all 3rd party codecs (xvid was the only one installed and for months)
reinitialized default directshow filters
checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
used msconfig to selective startup without other applications/services running.
Uninstalled all adobe products, and reinstalled.
I performed all of these in a systematic manner, trying to solve the problem. None have fixed the problem.
So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application. Any thoughts?
System Info:
PC Windows 7 pro 64-bit SP1
Core i7 - 960 24GB ram
AMD Radeon 6750 v12.10
Adobe CS6 Master Collection

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Why do Encore CS5 and Premiere Pro CS5 have intermittant Sync issues?

I am noticing that Encore CS5 is "buggy" regarding sync issues with material edited by Womble and Corel Video Studio and I am guessing other programs as well?
In high definition I take AVCHD and edit in Corel Video Studio. If I leave the project as one single 42 minute segment and import this asset into Encore CS5, more often than not there are bad sync issues. To get around this I have to divide the 42 minute project into approximately 6 smaller ones- Each smaller asset ends where I had done the editing. Encore does not have any problems now with these 6 smaller assets.
In standard definition I edit in Womble and export as a MPEG2 Program. Sometimes Encore has a problem with the asset sync and sometimes it does not. (I am guessing about 20% of my assets end up with a problem). The same asset if brought into TMP or brought back into Womble does not have any sync issue. If brought into Premiere Pro CS5 it will exhibit the same behavior as Encore- If Encore has a sync problem, so will Premiere Pro. So to get around this I then have to go back to the original womble file and break it up into smaller pieces, at every edit point I cut and export the smaller file just after the end of the transition I applied. With a 6 hour project I may end up with dozens of small files to get around this problem- not very efficient.
Any ideas how to fix this or why Encore is so buggy? Would moving the original assets around in Womble- example taking something that was at the end of the timeline and then moving it to the beginning cause these issues for Encore? Or is there some other cause?
Encore CS5
Premiere Pro CS5
Windows 7 64 BIT
Quad core
2.4 GHZ clock speed
6GB memory
150 GB free space on drive
NVIDIA GEFORCE 8500 card

I've used VideoReDo in the past, which I believe has some similar strategies to Womble. I found when I tested streams, that there were often problems in the source streams, and that the fix was not 100 percent.
You may also find such files that are not 100 percent the same length video to audio.
In any event, the possibility other than Encore being buggy is that the files you are bringing in have problems when Encore tries to validate them. I'm not saying Encore doesn't have its problems, but clean mpeg files do not have sync issues ordinarily.
For some scenarios, I like your workflow (edit mpeg files in a frame accurate mpeg editor that is not retranscoding the whole file), but the results are often not consistent.
You don't say, and I would certainly look at, the nature of the audio stream you are using. I can not tell you what the problems are, but some streams just do not edit well, even though they may play back okay in some players, but still have issues in Encore and/or Premiere.

Initializing Installer... and then nothing in Photoshop CS5 and Premiere Pro CS5

Hello. I have a pretty big problem, I can't install Photoshop or Premiere Pro on my PC. I get to the " initializing installer " part, it fills to 100%, then the window simply disappears. What should I do ? My OS is XP SP3, and I have enough HDD space left - around 50gb in C: and 550gb in D:, so this isn't the problem. Also, I don't have any old installs of Photoshop / Premiere Pro on my PC. As for the windows, I've just re-installed it last week, so I'm sure that I don't have any viruses or stuff like that. One thing that I must mention - before I re-installed my windows, I was able to install both Photoshop and Premiere Pro. I hope you can help me. Thanks

Photoshop 32bit should, but Premiere Pro CS5 will NOT install on WinXP... PPro CS5 REQUIRES a 64bit operating system to install
If you really need PPro CS5, you will have to upgrade Windows to Win7 64bit... the Pro version is most used for video editing
If you bought a CS5 suite, Premiere Pro CS4 is included for those with a 32bit version of Windows

Importing After Effects document to Premiere Pro errors: "The importer reported a generic error."

I´m using Premiere Pro CC ver 2014.1. and After Effets 2014.1.1. in OS X Yosemite. I can't import After Effects project to Premiere.
There is always same error message: "The importer reported a generic error."
I have tryed to save After document several different names and greate new ones. Always same error. Whats wrong in my workflow?

Okay so I've searched around most of this forum and as much of Google as I could find - I have found similar problems, but nothing exactly the same; and none of the solutions I've found have worked for me. I've seen a lot of people having trouble connecting to the DL server on the file-selection window, but I don't even get that far - an error message just pops up in the middle of my screen - and my error doesn't mention a server, just that it can't connect to AE DL.
I changed firewall software (which I've wanted to do for months, anyway) and still to no avail.
As for the "The importer reported a generic error" problem also, I can't find any problems or solutions with After Effects files not being able to be imported.

Exporting After Effects CS5 to Premiere Pro CS5

Similar Messages

Maybe you are looking for