Exporting an .aif file

I can export out an .aif file but it says that it's an AIFC file when I click on it's information.
Is there anyway to export out a simple .aif file?
-Evan Jacobs

AIFC is a compressed version of AIFF.
I've had experiences with certain audio apps not recognizing AIFC.
I haven't been able to find a clear answer as to how AIFC is compressed but IMHO there should be a way to produce the file format of choice and get what you ask for.
If AIFC is indeed different from AIFF then we should have the ability to select between the two.
Another interesting point is that on the occasions when I do receive AIFC files from clients they always think they are sending regular AIFF.
I think the OP's concern is valid.
g

Similar Messages

Silence added to the end of 1 of 2 songs that were "split" and exported as .aif files.

Hey folks,
I have 2 songs that run seamlessly (ideally) together. When splitting them apart in garageband and exporting them seperately as .aif files, I find that the first song ends up with about 4 seconds of silence at the end, while the other does not. This obviously affects their ability to run smoothly together in playback. I've tried doing this a couple different times but have only had luck when sending the songs directly to iTunes as a compressed file. Any ideas?
Thanks

infantalia11 wrote:
song ends up with about 4 seconds of silence at the end
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Audio levels go wacky when I export to AIF file?

I am working on a 13 minute multitrack project in Soundtrack Pro. I went through and set all the levels, then I export it to an AIF file and put it back into my Final Cut Pro project. Once I export, there are three scenes in which the audio levels go completely wacky - some places are at a lower level than what I set and other places are at a higher level than I set. I then go back into STP and when I listen back at those scenes these new wacky levels show up in STP. I then close STP and reopen and lo and behold the levels I orginally set (that I was very happy with) are back in place like nothing ever happned.
Some notes on what it might have to do with: All three of these scenes were shot using 2 Lav mics. These were each set into it's own channel on the Handy recorder. In STP, each lav channel is in it's own track. The audio level settings that I like for these two channels are very different (one actor was much quieter than the other). It almost seems as if in the export STP wants to put Channel 2 at the same level I have Channel 1 - which I don't want.
I have been spinning my wheels for hours trying to fix this. Anybody out there have any ideas or solutions or workarounds?
Much obliged for any help!
Michelle

This problem has also been plaguing me today. Here are my specifics and how I solved it (Expanding on what Quentin Holmes mentioned)
CONFIRMED WORK AROUND! The .m4v file gets created while encoding, but Adobe Media Encoder does not re-pack it back into the .mp4 unless you select the "Export Audio" in Adobe Premier export prior to queuing. If you don't want audio, mute the individual tracks and still export audio.
My details:
Just bought a GH4, shooting 4k 25fps MOV, trying to simply trim a few clips and export them as H.264 .mp4 with no audio. (By the way it would be nice if we could export 4k .MOV files from the camera back into .MOV once finished editing, but in premier that frame resolution is not supported)
Specs: Mac Mini, Quad Core i7, 16GB Ram, OSX 10.9.4, Adobe Premier Pro CS6 6.0.5, Adobe Media Encoder 6.0.2.81
Hope that helps anyone with the same prob

Error while exporting a par file from NWDSVersion: 7.0.19 to portal7.0

Hi,
When i tried to export a par file from NWDS to portal. I am getting the following error. Please can any one help me to trace out this error.
21.08.09 / 15:09] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.io.FileNotFoundException: http://sgcsapeps:50200/irj/servlet/prt/portal/prteventname/upload/prtroot/com.sap.portal.runtime.system.console.ArchiveUploader?login_submit=on&j_user=XXXXX&j_password=YYYYYYt&j_authscheme=default&uidPasswordLogon=Log%20on
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:792)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:363)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:435)
     at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:221)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:416)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:350)
     at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
     at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
     at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
     at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:531)
     at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at org.eclipse.ui.actions.ExportResourcesAction.run(ExportResourcesAction.java:112)
     at org.eclipse.jface.action.Action.runWithEvent(Action.java:842)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
     at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
     at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Thanks in Advance.
Regards
Basha

Hi,
Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
Windows/ Prefereces / SAP Enterprise Portal
Check the following enteries
Alias
Host
Port
Login etc.
Regards,

I exported an indesign file as a pdf saved to my desktop, now all indesign files on desktop are turned to pdf. HELP PLEASE

I exported an indesign file as a pdf saved to my desktop, now all indesign files on desktop are turned to pdf. HELP PLEASE

If you are using Mac, press Apple + I to get the information. It show a table. There is a section call Open with. Change the file with pdf icon to open with indesign. If using PC, just click on the second button on the mouse and open with Indesign.

Can't export an EPS file from Photoshop CS5 and open in Illustrator CS5.

I'm on Mac OS X Lion 10.7.5
I am making DVD covers for print. The barcodes for the DVD covers have to be done in Illustrator. But the original designs are done in photoshop including the text. For years this hasn't been a problem. Right before adding the barcodes I create an EPS file from photoshop, open that file in Illustrator and all my text is automatically coverted to perfect crisp clean vectors, viola! I add the barcodes and export the PDF for the printers.
But now I can't open my EPS files in Illustrator CS5 even though I'm exporting them the same way I always have from Photoshop CS5. Illustrator says... "The operation cannot complete because of an unknown error." --> Note it does not give an error number after this warning like I see it does for so many other people.
I have been trying to fix this for over 10 HOURS spanning 2 days! I'm infuriated I can't get help from Adobe on this and have read all the forums and don't see my problem listed anywhere.
I've tried:
- Deleting the .plist file and the Settings folder & resetting my permissions
- Uninstalling and Reinstalling Illustrator
- Turning off all other applications
- Creating more disk space on my hard drive (even though I have 200gb available)
- Restarting the computer
- Disabling my Font book and still I can't open the EPS file
I thought maybe it's possible it's the font I'm using Fontesque OT so I even tried converting text to objects prior to exporting the EPS file from photoshop to illustrator and turning off my font book, but still it won't open. And if I open the PSD directly in Illustrator, text comes out a bit fuzzy in the PDF I export.
If anyone can provide any solutions I would be so grateful! I'm at my wits end here, this should have taken under an hour to do and now it's ruining my entire weekend. I'm completely panicked because I was suppose to have these to my client over the weekend so they could turn them in for Print frist thing on Monday morning and of course Adobe provides no chat support or phone support after 7pm on weekday or on the weekend which is when this all started.

I never even thought of reinstalling photoshop, but I think this was a font issue. I'd never saved an EPS with Fontesque OT Regular enabled, only Fontesque OT Bold. Somehow I think the font was causing the problem because ridding the font from the equation allowed me to open the EPS file.
After 12 HOURS of trying different things I found a WORK AROUND...
I had to:
- Select the Text in Photoshop (with Fontesque OT enabled) --> Select Create Work Path --> Covert to Shape on each of the text items
- Save EPS file out of Photoshop
- Disable Fontesque OT font in Font Book
- Then open EPS in Illustrator add in my Barcodes and export the PDF
(the barcodes have to be added in Illustrator because they need to be pure 100% black with no CMYK color in them. You can't save them out of Photoshop that way, only Illustrator, otherwise I would have made my pdf straight out of photoshop like any other normal human
This work around is the only way I could get the EPS files to open in Illustrator and still have the text remain super crisp like a vector.
NOTE to others in the future about crisp text from Photoshop to Illustrator:
- Simply "converting to shape" did not preserve the vector. You have to Select Create Work Path --> then Covert to Shape on each of the text items (with the font enabled) for this to work and preserve the crispness of the text. Even creating "smart object" did not truly preserve my vectors or the text crispness in the EPS file once I imported it into Illustrator.
DrStrik9 thank you SO MUCH for trying to help me. You did give me ideas that helped me figure out the workaround and also helped me feel not so alone as I struggled through this. I'm going to follow up with your other suggestions about reinstalling photoshop and also checking my RAM, etc. But I just want to that you so so so SOOOO much for all your time and consideration in this matter. I hope you have a wonderful amazing week ahead and that someone does something very nice and thoughtful for you too

How do I export detached audio files as separate files, for Pro Tools processing?

My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
Question:
How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?
Help!!

Michael Holmes1 wrote:
I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
No.
You need to explore Compound Clips. This workflow may or may not be of help.
Select an Event with clips in it and press Option+G to make a (blank) compound clip.
Select the Event Browser, create a new Event and call it 'Effects'.
Drag the Compound Clip into this Event.
Right-click the clip and select 'Open in Timeline'.
Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
Now open a project and select and copy one of the clips with effects etc.
Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
Andy.

I converted aif files to mp3 files in I tunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive. How do I get the iTunes to only copy the smaller file?

I converted aif files to mp3 files in iTunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive. How do I get the iTunes to only copy the smaller file?

My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
Smart playlists cannot be edited manually, only by changing the rules. You can use them as the basis for another smart playlist though.
There is added overhead to using smart playlists, so don't go overboard.

How do I export a .dwg file so the Search/Find function can be used on it?

I have some .dwg files that my co-worker exported to PDF. It is crucial for me to have the ability to use the search or "Find" function in Reader. There are 11 different .dwg files exported into an 11 page PDF, but some of the were exported with different properties. I can search on 4 of them, but the other 7 are unsearchable. I believe my co-worker user Autodesk TrueView to export the .dwg files to PDF. So my question is what program I should use (I believe that TrueView is capable of what I am trying to do, but I'm not sure) and how should I set up the the settings before I export it to PDF. Thanks.

You need to contact Autodesk, almost no one here is likely to be familiar with what Autodesk can or cannot do.

SSRS - Export multiple pdf file

SSRS report background :
Report generating 50 student details with 50 page (each student one page- group by student).
now data will export one pdf file with 50 page where each page having one student details.
Requirement :
instead of one single pdf with 50 page i want 50 pdf file so i can send each report to respective student

generating one pdf file with 50 page where each page having one student details.
Hi ,
Please follow below steps;
Step1. Create one Row Group based on Student.
Step2.Row Group has been created. We can see the Group1 in the Row Group Pane.
Right Click on the Group1 column Delete Columns only.
Delete Column window comes, Choose Delete column only and click on
Step3.Now you can see the Group1 column is deleted but Group1 is still available in the report that groups data Student wise.
Step4.Go to Group1 property by right click on Group1 in Row grouping pane.
In the Group property, go to Page Break Page Break Option Check the box for “Between each instance of a group” and “at the end of group”.
Right click on the Tablix go to Tablix property. Tablix property windows comes: Check “Add Page break after” and in column header, check “Repeat header columns on each page.”
Step5.After implementing Page Break and Grouping, run the report and export it to PDF.
Thanks.

Is there a way to export multiple design files at once?

I currently have about 30 old forms that I am no longer using so I want to clear them from my online account, but I need to keep a copy of the form and responses for audit purposes.
Rather than go through one by one, is there a way I can batch export the design files, and the responses for the 30 forms?
Thanks
Luke

Unfortunatley no. You must export the forms one at a time.

Error message exporting large picture file from Aperture 3.5

Recently I took a large panaramic comprised of 165 pictures using Gigapan Epic Pro and stitched together using software provided with Gigapan. I exported the stitched file into Aperture to perform final edits. When I go to export the final version I keep getting an error message. The file size will be approximately 2.0 GB. I've been able to export a 0.7 GB file without problems (it did take several minutes). I have a late 2009 27" iMac with 3.3 GHZ Intel Core 2 Duo processor and 16 GB memory. Any suggestions? Not sure if this is an Aperture problem or if my system is not up to the task. Below is the error mesage I receive. Thanks for your assistance.

Testing: Exporting a large TIFF - the original is 24512 × 23016 (564,2 MP), 1.05 GB
The exported file that I am seeing on my Desktop after 10 minutes, is showing this in the Preview:
But after exporting there was no message at - neither an error message nor the usual alert when finished "Export 1 version completed - Reveal ...".
So, I am not yet conviced that the export went well, but Aperture can export gigantic TIFFs.
What is the file format you have been using? My test was done with TIFF, 16 bit.
Aperture 3.5.1

System Measurement - Error while exporting to LAW file

Hi all,
We have the SAP ERP 6.0. We started the system measurement on our ECC landscape with the aim to consolidate the results with LAW in Solution Manager. We performed the measurement in our production server and we select System Measurement - Export to Law File and execute, we are having the following error:
Last measurement was not successfully performed (see USMM)
We are having the error despite doing the measurement afresh
Grateful if you could suggest what to do.
regds

Hi all
thanks for all your comments.
We have tested in other system with Basis 14 and it works there. So we are presuming that the error is due to Basis being level 13.
Still, we have informed SAP about the error.
thanks all.

Regarding exporting a Par file from NWDS.

HII...
I have a problem regarding the exporting a par file from NWDS. when i created any projectt my project is succesfully deployed but . it is not visible when i create any iview from par.
pls check this steps , perhaps i am missing any steps , or i m deploying it in wrong manner.
suppose i have to change the masthead brand image.
steps r .
1. download a par file.
2. do the changes in headerview.jsp file.
3. add the image in img folder.
4. add the jar file in lib folder.
5. save and quick par upload.
MY server settings r correct . but i dont know why my project is not in the list.
thanks..

Hi,
You will have the par file directly under your project folder where also your .classpath and .project files exist. Also check them from windows explorer.
Without a par file, you cannot deploy your project on the server.
To create par file check this:
http://help.sap.com/saphelp_nw70/helpdata/EN/96/df7f409cd50a1ae10000000a155106/frameset.htm
Once you export the par file, you should see this par directly under your project folder.
If this is not there, then it is a problem in your NWDS.
Let me know the version of NWDS you are using.
Regards,
Praveen Gudapati

After upgrading to Mavericks, all of my contacts disappeared. Did a "contacts archive" export and the file is 17mbs. Looks like there's data, but none of it at all displays. What gives? 20" iMac, early '09

After upgrading to Mavericks, all of my contacts disappeared. Did a "contacts archive" export and the file is 17mbs. Looks like there's data, but none of it at all displays. What gives? 20" iMac, early '09

After upgrading to Mavericks, all of my contacts disappeared. Did a "contacts archive" export and the file is 17mbs. Looks like there's data, but none of it at all displays. What gives? 20" iMac, early '09

Exporting an .aif file

Similar Messages

Maybe you are looking for