Exporting an Apple ProRes before compressing for SD-DVD or Blu-ray (or AVCH

Hello,
this is my question:
does exporting a sequence to an Apple ProRes Self Contained file helps to gain quality when compressing for SD-DVD or Blu-ray (or AVCH disc)?

Thanks for answering, Tom.
Let me try again, though. (Also, just thinking about the footage, forgetting about effects, titles, etc.)
Do you think that this applies to DV-NTSC and HDV sequences?
I've compared a DV-NTSC sequence exported out using:
DV-NTSC compression and one -using Apple ProRes.
They do look different. Wouldn't you agree to this?
What about HDV,
- is it erroneous to think that (when capturing) by transcoding to AIC or ProRes you are gaining some quality?
- or if you already capture HDV natively, it doesn't make a difference to export an ApplePro Res version to make a SD-DVD from?
I am concerned with this, because I shot once some HDV footage at night with a Sony Camera, going to a hard drive, and when I transcoded the files from the hard drive to use in FCP, (using MPEG streamclip) I noticed a relevant difference in how much the noise was noticeable on the HDV compressed files vs. the apple ProRes compressed files.
Have you ever seen these differences?
Thanks!!!

Similar Messages

Optimal Quicktime Export Settings For Eventual Burning to Blu-Ray DVD

Hello. We currently have a huge backlog of FCP, FCE HD and iMovie HD projects created in 720p and 1080i formats. While we all await FCP and DVD Pro support of the 1080p Blu-Ray DVD burning, in the mean time, what are the optimal Quicktime Export settings to get best possible rendering of my existing FCP, FCE HD and iMovie HD in preparation for eventual transfer to Blu-Ray DVD for best possible viewing on my large screen LCD TV via Blu-Ray DVD player. I'd like to get to work exporting all my movies into the optimal Quicktime format in preparation for 1080p Blu-Ray.
For example, I have been creating FCE projects in a 1080i 60fps format. Once completed I typically have been exporting a "Full Quality" stand-alone movie. Is that what's optimal for the 1080p Blu-Ray DVD format, or something else? For example, what about interlacing? Should I be "de-interlacing" my outputted quicktime movies for better playback in the Blu-Ray 1080p format? What other things should I be considering.

Full quality sounds like you'll be safe. Keep in mind that WHEN DVDSP gets Blu-ray support, it will be able to do al the encoding itself. I do know that the next generation DVDs are using MPEG4 or VC1 compression instead of MPEG2 like standard DVDs are today. http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC http://en.wikipedia.org/wiki/VC-1 That being said, I don't believe that Compressor has a VC-1 encoder, but it definitely has H.264, so if you wanted to do the encode yourself, I guess you could pick that and be set. I would do some research on the technology behind Blu-ray and then base an encode on what you find. There's also MANY threads on here about this already, so Search is your friend and use it to get more info.
Good luck and don't forget to rate if this was helpful,
-Brian

Adobe Premiere Pro Help | Exporting to DVD or Blu-ray Disc

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/exporting-dvd-or-blu-ray.html

Exactly what are you Exporting?
How are you burning your BD?
Are you doing the authoring in Adobe Encore, the authoring program, included with PrPro, since CS 3?
If you are using Adobe Encore, and having issues with the resulting BD (Blu-ray Disc), then I would post the full details of your Project, and steps taken, in the Adobe Encore Forum: http://forums.adobe.com/community/encore/encore_general
Good luck,
Hunt

Examples for JAVA ME in Blu Ray

Are there any code examples for using Java in Blu-Ray DVD players?

For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Also, Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
tstart=0

How do I export to Apple ProRes 1920x1080 422 HQ

I need to export an HD Premier Pro CC project to Apple ProRes 1920 X 1080 422 HQ for broadcast. There are no options for this or any Apple ProRes codecs. Can someone please help me? This is a standard broadcast format. I loved editing my first Adobe Premier Pro project until this happened.

Hi Lika101,
Please click on file>export>media
Choose QuickTime as the format and then look for the video codec for pro res 422 HQ.
Thanks

Adobe Media Encoder CC: Can I export to Apple ProRes 422 on a Mac?

Hi folks,
I tried to find some information about it, but couldn't really find a definite answer on this.
Unfortunately, my Mac is getting fixed as we speak, so I can't try this out either...
I want to convert mxf files (XDCAM HD 422 1080i 50, 50 Mbit/s with multiple Audio channels) to Apple ProRes 422 using Adobe Media Encoder CC.
Simple question: Is that possible or do I need to look for a different workflow/converter?
Thanks for your help!
Jens
PS: OS is Mavericks...

Hi DataWrangler,
Thanks for posting on Adobe Forums.
Please download proress presets for Adobe Media Encoder from here : http://www.adobe.com/support/downloads/detail.jsp?ftpID=5411
Please update if this helps.
Regards,
Sandeep

HDV orginial video compress for SD DVD steps, I need

I read some on this forum and not sure what I suppose to do to compress from FCP to SD DVD. Can you tell me what is the steps on compressor. It will be show on theatre screen (not hollywood type).
FCP compression setting?
Compressor setting?

You could try duplicating that 90 minute preset so you can make a few adjustments. One of the settings I modify in my m2v presets is in the Frame Controls: Resizing Control: Deinterlace. I have that set to Better or Best, depending on the video. I also set the Output Fields: to Progressive. This seems to work well for my DVDs even when down converting from HD.

2 ideas for AppleTV: hybrid HD/blu-ray on Apple TV and a new video codec

I was impressed with the keynote but I have 2 suggestions for Apple -- one regarding Apple TV and one regarding a new possibility for movie rentals and/or quicktime and/or itunes:
1. Apple TV - to make this a truly revolutionary device, all you need to do is add a blu-ray/hd-dvd hybrid drive! Now THIS would be a breakthrough the stockholders could have put more money in for :\. You'd have rentals covered digitally through iTunes - regular format & HD, and it would 'just work' with ALL physical media too. Shortly, it would trivialize the format and precipitate the digital rental model even further because instead of paying for two players, consumers have an easy option to cover ALL bases. Once those are covered, the clarity of renting digitally becomes obvious, and iTunes dominates this arena.
2. You should look into ESPRE Solutions for your video codec and also for live streaming events through iTunes. They have a proprietary codec that can STREAM live HDTV resolutions at very low bandwidths. The latest story is here:
http://money.cnn.com/news/newsfeeds/articles/prnewswire/NYF05925012008-1.htm
http://www.espresolutions.com/
Imagine: Next Keynote. Live. HD. They can actually make that happen for you right now.
I'm an apple user and investor - I love this company and it's products. These are just things that occurred to me during the keynote to make things even better.

As much as I would love it if the Apple TV was to have a Blu-Ray player, that will never happen. That is not what Apple is trying to do with this product. If you also look at the direction they are going, it would seem that Apple thinks everyone can do away with all types of media and just go strictly wireless and buy everything through iTunes. This is a real shame. It would appear that Apple just doesn't understand that most people, such as myself, do not want to be pushed into something they don't want. If the Apple TV had a blu-ray drive it would be the only thing I needed for my media center. Since it doesn't I have to either buy one or get something that already has it such as a PS3.

Is there a good step-by-step proces for archiving photos to DVD or Blu-Ray?

Hello
What's the step-by-step process for taking a project and backing it up to Blu-Ray? My library is pretty big, and I need to back it up.
I'd like to be able to have Aperture still show the thumbnails when I launch (and still be able to search with keywords and locations and such), but then prompt me to insert a disc when I want to reference the actual image.
Is this easy? What's the process?
Thank you for your time,
------S

Does Aperture have any kind of renaming feature so that I can rename the originals before backing up? That might make searching easier.
Yes.
You have a couple of options here (in place renaming and renaming at export) depending on what your needs are:
Renaming in place:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=5%26sec tion=15%26tasks=true
Renaming at export:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=20%26se ction=2%26tasks=true
Note - the renaming is in step #5.
Also, do you know anything about the metadata? If I back up the images, is the metadata included? That is to say, if I use an app like CDFinder (a disc cataloging and searching utility) to search for terms, will they show up? Or is the metadata only accessible from within Aperture?
Not sure regarding that app as I have never used it, but you really have two options:
1 - Export as JPEG, TIFF or PSD and opt to include all metadata (this obviously doesn't help with backing up Master RAW files).
2 - Export Master copies with ITPC metadata written into file (not sure what all would be included in your case, but you could easily test with an image).
Good luck.

Quicktime settings for future transcode to Blu-Ray & DVD in Encore

Hi, I'm asking this here because I think this is where the best knowledge on the subject is. I'm making a slideshow video in Fotomagico that I hope to author to Blu-Ray and DVD in Adobe Encore. I know that it will have to be transcoded in Encore so I'm wondering what will be the best output settings when I make the original video file in Quicktime. This has been created at 1920x1080, 60fps
Some specific options that have me confused:
Frame rate: leave at 60 or not. From my understanding, blu-ray 1080p is 23.97fps and DVD is 29.97?
Compression codec: Options include AIC, ProRes, MPEG-4, H-264, etc. I have no idea what will work best?
Or, should I send a file that doesn't need transcoding? Encore calls these elementary streams and apparently they have to match Blu-Ray/DVD spec and have no audio in the file. Is there a way to make this (I assume H-264 or MPEG-2) in Quicktime?
Thanks for any tips!!!

Hey Hoffsta,
yesterday i was looking for bluray edition and i found this can be usefull i hope:
http://www.kenstone.net/fcphomepage/blu-ray_fcpfields.html
Flo

Best settings for highest quality results, Blu-Ray vs DVD

I am shooting AVCHD 1080p 60fps with a JVC GC-PX100, using a Windows 7, i7-2600 3.40Ghz., 8Gb.RAM, 1 TB HDD with PE11 and a Pioneer Blu-Ray writer drive.
I'm looking to find the best settings for replay on a 55" HDTV. I have tested both BD and DVD without seeing very much difference between the two as far as video quality is concerned,
but I want to make sure I'm using the right settings for the best quality on both drives. Can someone please offer a step by step settings procedure for both BD and DVD, also which do you
think is the better route to take between the two?
Also, I have noticed there is a ghosting image after letters/numbers on faster moving content (like railroad cars) on my video even before transferring it, can anyone give some insight to what that might be and if there may be a solution ??
Many thanks for your anticipated help.

Rikko
Thanks for the reply.
Referring back to your post 4.
Additional info: When I published my test video for DVD I chose “Computer” on the Publish+Share drop-down list, then chose MPEG, Presets: HDTV 1080p 29.97 High Quality.
Saved and burned to DVD. I also did the same choosing AVCHD Presets: MP4 – H264 1920x1080p 30. Saved and burned to DVD
Let us clarify. When the end result is "...burned to DVD" in either case, are saying that you take your saved file to DVD-VIDEO on DVD disc or AVCHD on DVD disc, using another Premiere Elements 11 project on Windows 7 64 bit.
My post numbered 1, contained the step by step for taking your 1080p60 Timeline directly to DVD-VIDEO on DVD disc or Blu-ray disc format on Blu-ray disc.
If you are going to introduce intermediates in your workflow (Timeline content saved to file and then burn to disc), then I would offer the following scheme
a. 1080p60 project preset (project 1)
b. 1080p60 Timeline saved to file via
Publish+Share
Computer
AVCHD
with presets = MP4 - H.264 1920 x 1080p30 (and then under the Advanced Button/Video Tab, customize the export settings for 1080p60 instead of 1080p30)
c. Import that back into Premiere Elements 1080p60 project (project 2) and burn to disc DVD-VIDEO on DVD disc, AVCHD on DVD disc, or Blu-ray disc format on Blu-ray disc..
This is another alternative interpretation to your saved and burned to DVD.....in one project, you are doing two different exports...one to a file saved to the hard drive and after than the burn to disc (be it DVD-VIDEO on DVD disc, AVCHD format on DVD disc, or Blu-ray disc format on Blu-ray disc). If this is the case, there is no "intermediate".
There used to be the discussion about HDV to DVD-VIDEO format on DVD disc - whether HDV file should be imported into the project as source or whether the user should downsize the HDV to DV widescreen in the camera before import into a DV Widescreen Premiere Elements project. As we getting into this type of question with your 1080p60 to DV widescreen?
Please review and consider. And, then please let me know if any of the above addresses your considerations.
Thanks.
ATR

What is the process for connecting ethernet. Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left. Note Airport wireless is working.

What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate

It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks!

Advice for backing up media - Blu Ray? Anyone try it?

I am currently using external drives to back up lots of video and was wondering if anyone has tried using a Blu Ray burner to do this? Not sure what the data limitations of the disk are? Are there external ones? Would you recommend it or wait a bit longer?
Thanks.

Absolutely, original tapes, along with a project in which they've been properly logged and captured, are the best form of backup.
But not everyone works with DV sources, and not all of our source material is batch-re-capturable.
For instance, I work with an agency that reps touring bands, and a lot of the source material I get is on DVD video. I have to rip and extract the video (to which the clients hold the rights) and import it. At this point, whiile I could theoretically repeat this procedure and get a file almost identical, it still isn't frame accurate and would require some reworking to rebuild any project if teh media were lost.
I agree Blu-ray isn't cost-effective yet per GB, and DVD-5 requires a lot of time and patience to archive. But it's still a good, safe way to back up material like this, IMHO. To steal Shane's example, drop a DVD and a hard drive from a foot off the ground and see which still works. I do archive to hard drives to keep things accessible, but I know too well how vulnerable that storage medium is to failure.
my two cents.

DVD for Film Festival Screening & Blu-Ray Question

Hey Everyone,
I just wanted to double check something.
I have been making DVD's with DVD Studio Pro for a short film shot on HDV -- 23.98 and they look great. I chose the "Best Quality" output, etc. etc. This project is going to be screening in a small film festival and they are going to project off of a DVD. I did a test screening in a theater classroom on a big screen and it looked fine.
I wanted to check in and see if anyone thinks there is a better output option for this. I don't have a Blu-Ray Burner at this time.
Also, I plan on getting a Blu-Ray burner in the future. I hear Lacie is the way to go? Any other suggestions, and/or links to other burners highly recommended. Also, do you need Toast to burn Blu-Ray?
Thanks for your input!
- Eric

You might be able to play a true HD file from your computer, you don't need the BD. But you must test the display output from your card to the projector in advance to know you've got what it takes to connect the two and if the projector is even capable of showing 1080. Most are not.
It is highly unlikely a festival will require BD submissions, too much hassle for them and for the participants.
bogiesan
Message was edited by: David Bogie Chq-1

Looking for Trayless/Slot Load Blu-Ray DVD players

Looking for a list of the Trayless/Slot Load Blu-Ray DVD players. Are there any for under $100? (or near that)

Rwillen, i agree with you. What TVLOVER said has to be one of the funniest things I have heard in a few weeks. Plus how would a Stand Alone players eye last longer then a PS3 eye? They both work in the exact same manner. And dont give me any bs about the eyes in stand alones are better design and quality then those found in the PS3. Because that is false. If anything the PS3 would use the better eye due to the more use they are subjected to. I have owned 2 PS3's since they were launched. BOTH were used for heavy gaming and the Blu-Ray from day 1. Guess what? My original FAT PS3 is still alive and kicking just fine. So over 7 years of use on that thing and not a single issue other then the bluetooth board went out. But I knew how to repair electronics ordered a new board for 30 dollars and it was as good as new.
But I have always recommended the PS3 over a blu-ray system due to its ALOT more future proof then a stand alone player is. It has the ability to do more then a stand alone player, and the price makes it worth it over a stand alone. Because while people around me were buying new Blu-Ray players due to the Blu-Ray spec changing and evolving in its early days. My PS3 with just a free software update got all the same features that people had to trash their "older" models to get. And dont forget about the encryption keys. Your at the mercy of the company to continue to make new firmware to keep the keys updated to play new movies. Not so much of a worry for the PS3 as it will still be around for a long time.

Exporting an Apple ProRes before compressing for SD-DVD or Blu-ray (or AVCH

Similar Messages

Maybe you are looking for