Exporting an .mov file with timecode

Hi -
I'm trying to find the best way to export an .mov file from Premiere or Encoder with timecode either burned in (as well as embedded in the file). Right now when I export the .mov files no timecode is coming through. Normally I would be able to read the timecode with the earlier version of Quicktime, and I can see it is just starting at 0.
I'm trying to export as .mov files so they can be given to transcribers.
Thanks for any help!
Elisa

It get's it from where you tell it to in the effect's settings. If it wasn't right, correct it.

Similar Messages

How do I export a .mov file with timecode that matches the timecode on my project's timeline?

Hi:
This seems like it would be an easy thing to figure out, but I'm striking out so far:
I have a long, 10-minute source video (actually a series of 16mm film clips that were telecined to a single 10-bit uncompressed .mov with continuous timecode by a film lab) on my project's timeline. I need to be able to export small sections of the timeline to individual .mov files--and I need to be able to open the resulting short .mov files in a footage logging application called F5. I'm currently trying to render these small individual videos as H.264 .mov files, since that's a format F5 can read. Rendering/exporting the 'work area' selection from my project works fine, so that's no problem.
The problem I'm having is that timecode of the resulting H.264 .mov files don't match the timecode on my Premiere project's timeline--they always start at 00:00:00:00. I don't want that. If I render out (for example) a section of 00:05:10:00 to 00:07:00:00 on my project's timeline, I need the exported .mov file's timecode to start at 00:05:10:00 and run to 00:07:00:00, not restart at 00:00:00:00. Is this possible?
I'm running Premiere Pro CS6.0.2 on a Mac OSX 10.8.2, all updates installed.
Thanks very much.

works using " title" ( cause its alpha ) but doesnt work using black video...gotta jump thru hoops to do it that way..is nuts...so title works fast
so you put cti where you want to start, put title up there above your video, put timecode in, make it " generate" , put start time in, and drag title to the end of your work bar for export...and it should be good...
or of course ann's way is good too

Is MOV file with mp2 audio tracks compatible with QT player?

Hi,
I export multiple .mov files with certain video stream and mpeg layer 2 audio stream inside, using MPEG Streamclip/VLC/FFMpegX. However it turns out that the sound part is not playbak correctly inside QT player. Is QT player not supposed to playback this kind of file? BTW, I'm on OSX 10.7.3, Quicktime player is version 10.1.
Thanks,
Shunan

I export multiple .mov files with certain video stream and mpeg layer 2 audio stream inside, using MPEG Streamclip/VLC/FFMpegX. However it turns out that the sound part is not playbak correctly inside QT player. Is QT player not supposed to playback this kind of file? BTW, I'm on OSX 10.7.3, Quicktime player is version 10.1.
Many possible answers here. Since you did not indicated the video compression format, my only recomendation would be to try playback in the QT 7 Player for your specific combination of video, audio, and file container. For instance, "muxed" MPEG-2/MP2 data in an MPEG, MPG, or MOV file container will play correctly in the QT 7 Player. On the other hand, the MPEG and and MPG files only play the video in the QT X Player and the MOV file container will not even open in the QT X Player.
Basically, if you check the QT X Player web page, you will note that MPEG-1, layer 2 audio is not supported by this player. However, whiile MPEG-1, layer 2 audio is still basically supported by the QT 7 Player, certain audio, video, and file container combinations may be problematic.

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Best settings for highest quality for exporting a .mov file to h.264

Hi,
I want to know what the best settings are for the highest quality for exporting a .mov file (720p50) to h.264. I want the same quality as the original.
I want to know the data rate etc.
regards,
Jeroen
Message was edited by: Woudgraaf-AV

There is no way to get the exact same quality when transcoding from an editing source to a highly compressed H.264 QT. However, you can get a real high quality by adjusting the data rate.
However, these things depend on the length of the original. I routinely encode H.264s with good results in the 3000-5000 data rate range. I also make sure that I use multiple pass encoding. Take a short snippet of your project (10 seconds or so), and try various bit rates until you have one you like that doesn't take forever.
Andy

Converting mov files with Quicktime Player for iDevices

I wasn't sure if should post this under iPad or here or at all as it is about coding, but it is about coding for Apple iDevices that can't display Flash, using Quicktime Player or QT Player 7 Pro:
I'm trying to add the ability for Apple iDevices that can't display tutorials I created in Flash, to see them with H.264. I read that I can simply open the original tutorial that luckily is a .mov file with Quicktime Player 10 in Snow Leopard and File > Save For Web and QT will convert to H.264 and also output several files needed to upload to your server.
But the only options are for iPhone, iPhone (cellular) and Computer. I assume an iPod would use the iPhone file, but iPad didn't exist yet.
I chose iPhone and Computer for my test. I got 2 .m4v files a .jpg, a small .mov and a .html page with the code I needed to copy/paste to my target html page.
Uploaded the files and could see the tutorial movie with my iPad fine. Using FireFox, I saw the beginning of the movie, then got the beachball. After a long wait, I tried a force quit and found that my Mac Pro was crashed too so had to hard shut down. Hate that.
Rebooted the computer. Tried accessing with Safari this time and it worked fine.
I also own Quicktime Player 7 Pro pre Snow Leopard (I'm running Snow Leopard now) and tried the conversion with it and noticed a few more config choices, like for frame rate. But the resulting code was about 29 lines of code with expected parameters versus 2 lines of code in the QT Player code which actually really surprised me. With both apps they have JavaScript references for the head tab to files on Apple's library on their site.
So.. I'm wondering why FF and my computer crash, I did output for computer as well as iPhone. And what to do for FF users and the fact that there's no specific output for iPad, am I OK just using the iPhone output since I can see the file OK on my iPad test.
Last, I've been reading about HTML5 versus Flash, but assume that what both my QT apps are outputting is HTML4. In the QT Player code there isn't even an embed tag, let alone the video tag I've read about, just a href to the exported Saved For Web .mov file, which I assume must point to the .m4v files that QT outputs and puts in the same folder as the other files, but there's no direct reference to them.
Sorry for the length, or if this isn't the place for these questions, but I do want to get this right before I convert about 20 tutorials
I wonder if I should wait until Lion and see if QT is changed to fix the FF crash and adds output for iPad?
One last thing: when you access the converted file with an iPad, first you see a jpg of the first frame with "Click to Play" in the center. When you do, you get the movie with a play triangle which you have to press to actually start the movie. But when you access the same html file with Safari, all you have to do is click the "Click to Play" and the movie starts as expected. Bug?

QuickTime X and QuickTime Player Pro create slightly different html code (but it all works about the same way). The "click to play" image file, a "reference" movie, multiple versions for different devices and the html code to preview the page and use as copy/paste into your Web page.
QuickTime X has fewer options than QuickTime Player Pro. The iPhone preset works just fine on the iPad.
Your Firefox crash may have been just coincidence and I doubt it was caused by the page code.
You may want to wait a while longer for the HTML 5 code because browser support is still in the learning stage and millions of PC users still use out of date browsers.
The reference movie points to the different versions of the file. The code "reads" the device and serves up the correct version for it.
I don't own an iPad but I suspect it works like my iPod Touch. All of my QuickTime files have the play "triangle" so the click to play image style page requires two clicks on it.

Trying to export a movie compressed with H.264 out of AE

I am having some issues with exporting a movie compressed with H.264. I am using AE CS3. When I output with the settings of this image:
http://intuitionusa.com/ae.gif
I get an error message that is below in the image. I have to leave Quicktime in the top settings in the output module and then select H.264 in the format button. It allows me to render out, but a message appears saying it is better to select H.264 from the "format" dialog box.
* Also, when I export out to H.264 the file size is much larger than just using quicktime pro. I think it might be better to export an uncompressed file from AE and then use QT pro to compress but that is going to use up a lot of disc space.
SHoutzager

You're probably getting that error because of a frame size/codec conflict.
Your comp is 900x600, and the MainConcept codec is looking for a frame size of 720x480 (NTSC DV).
Using the Quicktime wrapper to export the H.264 is a fine optioin, however, AE will not do as good of a job compressing to that codec as Quicktime Pro, or a dedicated compression application would do. AE can only cache a limited number of frames for the compression process (frames before and after the current frame), and as a result, the compression quality and filesize will not be as small as they could be by using a different tool for the job.
As such, your supposition about rendering out an uncompressed/losslessly compressed movie and then running it through QT Pro (or another compression application) yielding superior results was a correct one.

I suddenly can't watch .mov files with the QuickTime Player x?

I suddenly can't watch .mov files with the QuickTime Player x? There is always the message, i should look after new software! Can you help me?

Handy-dandy cut and paste to the rescue!
you need to install some other stuff to get the full file functionality back.
Here's the list.
Start with QT 7.6.6. - http://support.apple.com/kb/DL923
Get Perian, and install it. - http://perian.org
then VLC, - http://videolan.org
DivX - http://divx.com - and the
Flip4Mac package from Telestream - http://www.telestream.net/flip4mac/
A52/AC3 downloader: https://www.macupdate.com/app/mac/21875/a52codec - In this installer package there is an audio A52Codec.component. DO NOT USE IT! Throw it out and use the one that is linked below.
This is what I've put into my system and so far I've gotten every file to run fine, even my oldest videos.
These are codecs you should see.
In System/Library/QuickTime
     AppleIntermediateCodec.component
     AppleMPEG2Codec.component* (*optional if you've bought it)
     DivX Decoder.component
     Flip4Mac WMV Advanced.component
     Flip4Mac WMV Export.component
     Flip4Mac WMV Import.component
In your Home/Library/QuickTime/
     AC3MovieImport.component (you may or may not want this component, in some instances it causes conflicts. In my system, it doesn't. Who knows why? I don't.)
     Perian.component
For AC3 sound that is in most .mkv files, you need the A52Codec.component, this is the one you want, here: https://code.google.com/p/subler/downloads/detail?name=A52Codec.component.zip - unzip the file and put the component into the System/Library/Audio/Plug-ins/Components
Go back to your Perian settings and in the Audio Output button, set it to 'Multi Channel Sound' - Ignore the message Perian puts up and select it.
By doing a 'Get Info' on your files and where it says 'Open With' - default them to the QuickTime 7 program. Perian no longer will work with QuickTime Player so you must have QT 7.6.6 and set it so it is the default for all the filetypes you use.
It works perfectly with QT7. So far I've gotten ALL my old videos to play.
.avi, .mov (with the AC3 sound), .wmv, .flv, .mp4 and .m4v. all run fine as do all the older formats.
Good luck!
Deb.

Exporting a move clip with alpha channel

Hi there,
I’m trying to export a move clips with alpha channel.
I’m trying to export an animation with Premiere CS5. I made an animation of a rotating object in Maya and exported it with alpha channel as tiff images. Then they are edited with Photoshop to give them a drop shadow.
My problem is this. Can I export this tiff animation with the alpha channel?
My plane is to use move clips over backgrounds in a game – depending on the result there are different animations playing on top of several different backgrounds. There for the objects has to have a transparent/alpha channel over the backgrounds.
Again the reason for this is the complexity of the game and to make the game looking as real as possible. I’m hoping for some help here to make my plan possible
…thanks

Thanks alot for the help.
But now I’m wondering how to get the file size down?
The 32bit and alpha channel just increase the file size from about 1MB to 9,3MB, which is pretty much??
…any ides mate?

How can I link 1 movie file with several logic projects?

Hi all,
I've been working on the music for a film with a colleague of mine and are sharing logic files via dropbox. 72 cues had to be altered for logisitical reason to work in someone else's studio for the final mix. Since I had a copy of the movie on my machine and my colleague had a copy on his we thought that if we put our movie into the root directory of our logic project's folder then the movie would automatically load up with the projects after we shared them via dropbox. We checked to make sure that both movies had the same filename. Unfortunately this did not work and we had to then reassociate 72 cues individually with each logic project. With such limited time to prepare the cues for the final mix this really took too much time.
Is there any way in logic (9.1.8) to associate 1 movie file with a number of logic projects quickly, without having to open up the project and select open movie?
kind regards
/mischa

Seems to me that if you both had the movie file in the same location on both of your drives (eg on Macintosh HD at root level, in no other folder) then all the project files would search for this common path and find the file.
The problem arises when there is even a small difference between path names.
Unfortunately, this won't help you at this point as all the project files already are associated with unique file paths for the movie. By now, you've probably already done it one by one - but maybe for next time....?
There's no bulk or quick way to do this.

Try to open mov file with quicktime, says can't open pdf files.

Hi to everyone,
Suddenly I try to open a mov, any mov file, with quicktime 10.4 and some times opens the finder and nothing more, some times says that it cannot open one pdf document ( a document I actually have but never try to open with QT). some times QT says it canot open some png or jpg file.
But I double click mov files. And the incoherence is permanent, I mean that for the same movie file says it can't open the same pdf file, and in other file the same png, or the same jpg.. it depends on the mov file I try to open. Like if somewhere, somme kind of cache, adresse or reference is wrong.
this is the text of one of those messages when I double click a mov file:
"The document “phoenixRoomfillerB_v001_0104.jpg” could not be opened. QuickTime Player cannot open files in the “JPEG image” format."
And if I try again and again, at some point QT open only the finder window.
The weird thing is that on the finder window i can see the preview and play the preview. and the same mov files play well with VLC. And if I copy the mov file to my desktop it plays well unless QT start to open only the finder window, if that happens it does not work anymore with any file.
The files are on an external drive with 3 partitions.
And I make all the possible cleaning that I can:
I am the administrator of the imac and I am the only one to use it.
I am the owner of the volume
I use disk utility to check and everything is ok
I use onyx to clean as much as possible, cache, boot, volume structure, smart status, home folder permissions, kernel, extensions, QT components, etc. and everything works fine.
Imac 27 inch late 2012.
Intel 3.4 GHz i7
32 Gb Ram
NVIDIA GeForce GTX 680MX 2048 MB
thanx.

Try QT v7.x which is located inside your Utility folder.

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Why does adobe Premiere Pro CC Crash every time I export a movie file?

Why does adobe Premiere Pro CC Crash every time I export a movie file?

Please hand type your posts directly into the browser window. Copy/Paste leaves unwanted code throughout.
span style="color: #ffffff; font-family: Arial, Helvetica, sans-serif; font-size: 12px; background-color: #000000;"

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Mov files with Alpha channel

I do alot of video with transparent (Alpha Channel) backgrounds. I have always converted my avi files to flv files for the web without any issue. Now I am being asked to put my video onto iPads, iPhones etc. They won't accept flv files & I read that I can use QuickTime mov files to create an alpha channel. I have tried several ways to install a mov file (with Alpha) using dreamweaver onto an existing webpage but it always ads a black background with the video. I have tried the wmode - transparent option but doesn't do anything. I know the mov file I am using does have the alpha channel attached because I can bring it back into my rendering program and see it fine.
Any help is greatly appreciated.

What is up!
Based on my tests, it appears that the Mavericks embedded QT structure no longer considers many of the legacy compression formats to be supported under Mavericks. These formats were, by default, turned off under Lion and Mountain Lion which may indicate that Apple intends to drop even passive native support sometime in the future. Files containing Animation or PNG compressed data are no longer QL compatible and now force automatic QT X v10.3 conversion as mentioned above. Even worse, it appears other commonly used fomats like DV/DV in DV and AIC/PCM in MOV are also being relegated to this group. Luckily, DV/PCM in MOV, HDV/PCM in MOV, and ProRes422/PCM in MOV, along with all of my H.264/AAC/AC3/Chapter M4V distribution/iTunes managed files remain fully compatible with both QL and QT X v10.3 under Maverisks. This last is significant for me since many files containing AC3 as the primary audio stream are no longer QL/QT X v10.3 compatible with certain file extensions and/or container types which now appear to be checked in specific situations. Unfortunatly, what we've seen and learned thus far seems to be just the "tip of the iceberge."

Exporting an .mov file with timecode

Similar Messages

Maybe you are looking for