Exporting (and Importing) Just 1 Group

Since Dot Mac Sync is so messed up, I want to correct a discrepancy in one group by exporting it and reimporting into another. I seem to remember backing up ldif files but I can't find them any more. Have they been replaced by vCards? What would be the safest procedure for exporting just a group?
TIA
Enio Cordoba

Enio,
you can use the backup feature from within AddressBook program.
This file will be placed in
user/library/application support/AddressBook
(but will also contain your discrepancies).
You can export selected addresses to vCards at one go, but I'm not sure what you want as a next step; import them into another group that is already defined? What do you mean by exporting to a group? You can select addresses and then drag them to another group in the left column.

Similar Messages

Exporting and importing just table definitions

Hi,
I have this production database that has a huge amount of data in it. I was asked to set up a test database based on the exact same schema as the live database. When I tried to do an export (from live) and import (to test), with the parameters rows=N and compress=y, the target (test database) data file will still grow enormously, presumably because of the huge number of extents already allocated to the table in the live database. My test database of course, has a limited hard-disk space.
Is there a way to export and import the table definitions without having the target database experiencing a huge growth in the size of the tablespace?
Thanks,
Chris.

If an export with compress=n is still creating initial extents that a too large, you can still build with the import file but it will take a little work.
run imp with indexfile=somefile.sql
when imp is finished, edit somefile.sql by:
1. remove all the REM statements.
2. remove all the storage clauses (tables and indexes)
Make sure your tablespaces have a small (say 1k) default initial extent.
run imp again with rows=n
All your tables and indexes will be created with the default tablespace initial extent.

Export and import Sharepoint group and permissions

We have some custom sharepoint groups and permissions created.How can i just export and import
these group and permissions into another server.
I do not want to restore entire site collection.
just the groups and permissions...

hey,
You can find some code from Powershell here:
http://geekswithblogs.net/bjackett/archive/2009/04/24/the-power-of-powershell-and-sharepoint-enumerating-sharepoint-permissions-and.aspx
Or
http://get-spscripts.com/2010/07/adding-groups-with-permission-levels-to.html
Founder of SharePoint CookBook:
http://www.GokanOzcifci.be
Microsoft Certified Technology Specialist: SharePoint 2010, Configuring
Microsoft Certified Personal

Export and Import Computer Groups

Two Monday mornings in a row the Open Directory on our Intel-based Xserve's Mac OS X 10.5.7 Server had failed. This would mean that users who were supposed to have specific access right to folders and share points on other Xserve file servers couldn't get their files or had full access instead of restricted access. The first Monday a restart resolved the issue. The second Monday a restart did not resolve the issue and we opened a case with AppleCare Enterprise Support. We got it up and running again but it failed on Friday during the day. Another call the AppleCare Enterprise Support had me export all my users, user groups, computers and computer groups as a backup.
In the end, I had to do an erase and install of Mac OS X 10.5 server and I updated right to 10.5.8. AppleCare pointed me to the (now Snow Leopard) documentation and told me that now that the server was running and nothing was "broken" and they could not continue to support me. It was up to me to figure out how to restore everything from the documentation. Unfortunately, that document has NOTHING in it about restoring computers or computer groups. It only documents users and user groups. Our user groups were restored with the import of the previously exported list. However, all of the computers in our computer groups appear in the membership list as "Not Found". The preferences/settings for the group were restored but are not being applied to any computers. This means that portable users probably no longer have "mobile" accounts so they can log in off the network and now the Software Update is wide open (although most users are not administrators).
Is there some trick I'm missing to get the computers back into their groups automatically? I can add them manually but I have 400 and can't tell from the list of workstation numbers which are laptops and which are desktops.
-Doug

Hi Tapojyoti,
>>1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
Yes, WSUS 3.0 API Samples and Tools is not supported in Windows Server 2012R2 by default. We may try to rebuild it in Windows Server 2012R2. For detailed information about how the rebuiled, please refer to the readme document of the WSUS 3.0 API Samples
and Tools.
>>2. Is "WSUS 4.0 API Samples and Tools" available?
No, I can't find the WSUS API Samples and Tools for 2012R2.
>>3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
As I have mentioned above, due to WSUS 3.0 API Samples and Tools is released with source code, we can try to rebuild it in the Windows Server 2012R2.
If it doesn't work, as a workaround, we can configure the new WSUS server as the replica server of the existing WSUS server. After the synchronization, change the server mode to stand alone.
Best Regards.
Steven Lee
TechNet Community Support

How to export and import "Computer Groups" and "Patch approvals" in WSUS 4.0 ?

Hi,
I have a query regarding the export and import options for "Computer Groups" and "Patch Approvals" in WSUS 4.0.
In WSUS 3.2 once we install WSUS 3.0 API Samples and Tools, we get "WSUSMigrationExport" and "WSUSMigrationImport" tools under
C:\Program Files\Update Services 3.0 API Samples and Tools\WsusMigrate\ folder.
Using the 'WSUSMigrationExport' tool we can export the Computer Groups and the Patch Approvals in a XML file. And using the 'WSUSMigrationImport' tool we can import the 'Computer Groups' and the 'Patch Approvals' from that XML file into a different WSUS
3.2 server. We can run the import tool as below:
a. Run command prompt as administrator.
b. In the command prompt, go to C:\Program Files (x86)\Update Services 3.0 API Samples ans Tools\ WsusMigrate\WsusMigrationImport
c. Type WsusMigrationImport filename.xml TargetGroups None. Press enter; this will import Computer Groups to the WSUS 3.2 server.
Type WsusMigrationImport filename.xml Approvals None. Press enter; this will import "Patch Approvals" to the WSUS 3.2 server.
This is easy and useful.
Now, for WSUS 4.0 I did not find "WSUS
4.0 API Samples and Tools". So I installed "WSUS 3.0 API Samples and Tools" in my WSUS 4.0 server. And tried to import a valid XML file in the above mentioned process. But the command returned an error.
The error says the "Microsoft.UpdateService.Administration.dll" file was not found.
I further searched in the internet about this issue and I found that the "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0 as the .net framework used in "WSUS 3.0 API Samples and Tools" is 2.0 and WSUS 4.0 uses .net Framework
4.5.
So, Here are my questions.
1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
2. Is "WSUS 4.0 API Samples and Tools" available?
3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
I need an urgent reply. Thank you in advance.

Hi Tapojyoti,
>>1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
Yes, WSUS 3.0 API Samples and Tools is not supported in Windows Server 2012R2 by default. We may try to rebuild it in Windows Server 2012R2. For detailed information about how the rebuiled, please refer to the readme document of the WSUS 3.0 API Samples
and Tools.
>>2. Is "WSUS 4.0 API Samples and Tools" available?
No, I can't find the WSUS API Samples and Tools for 2012R2.
>>3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
As I have mentioned above, due to WSUS 3.0 API Samples and Tools is released with source code, we can try to rebuild it in the Windows Server 2012R2.
If it doesn't work, as a workaround, we can configure the new WSUS server as the replica server of the existing WSUS server. After the synchronization, change the server mode to stand alone.
Best Regards.
Steven Lee
TechNet Community Support

Exporting and Importing OIM Groups

Hi
I am trying to export and import OIM Groups from one environment to another.
It looks like some of the details of the groups (such as Administrative Groups details) are missing after the import.
Any ideas?
I will assign Points. Thanks
Regards
Vijay Chinnasamy

Hi Kevin,
Thanks for the note.
I found that during my import, it asked me to provide "substitutions".
Once I click, "Cancel Substitutions", the other data is there.
I think duirng my previous import, I clicked on "Next" too soon..
Regards
Vijay Chinnasamy

Question regarding export and import of Hyperion Security during upgrade

Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
K

Ihatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/

Is it possible to export and import jsf page and application module?

Hi,
I want to export a application module and then import it to another application,so deos jsf pages.If I can do this ,then my team could do the diffent work at the same time.one group response for data model then commit as application module,one group for page create and edit and so on .Who has any good idea?
Thanks advance
lixinzhu
2007/09/19

hi,frank
thank you.
You know a page include a .jspx file,a page definition file and depend faces-config.xml,faces-config.oxd_faces and other I don't know information,so if i only put the first two file into cvs,but how can i get other information in the last two file?When I get the first two file and needed information in the other file,how can i merge these into new project and let jdeveloper "reconize it"?Applicaion is more complex,it not only depend its self java class,xml and many entity object and view object,how to handle the "export" and "import" process?Just like oracle form,only a fmb is enough,database object only need to "put into database","export" and "import" are very simple,so i need jdeveloper to supply these "import" and "export" function.I'm not familar with cvs,does it can know object dependency like application module?if it can,how to let jdev "reconize" imported in object?
lixinzhu
2007/09/19

Trouble with export and import

I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
 0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PM

user3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error when exporting and importing TS

Hi I am running SCCM 2012 SP1 and am trying to export a Task Sequence including with the Windows 7 wim, the boot wim, some applications and drivers. When I exported the TS I selected to export dependencies and content.
I have setup dev SCCM environment (same spec as production) and am trying to import the .zip that was created when I completed the export. When doing the import I am getting the below error on both the Windows 7 wim and the boot wim :
Error Imported Operating System Image (1):
Create new Windows 7 Enterprise x64
Generic failure
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM file due
to error 80070003".
ErrorCode= 2147942403;
File="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\
\sspimagepackage.cpp";
Line = 483;
Operation = "Putinstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly. I am wondering if I would be better off using the Migration wizard to take the TS and
content across. Would appreciate any advice on either a) how to fix the issues with the importing of the TS or b) whether I should just be using the migration wizard.
Thanks
G

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Internal table export and import in ECC 5.0 version

Hi friends,
I am trying to export and import internal table from one program to other program.
The below export and import commands are not working when I run the program in background (using SUBMIT zxxxx via JOB name NUMBER number..)
EXPORT ITAB TO MEMORY id 'ZMATERIAL_CREATE'.
IMPORT ItAB FROM MEMORY ID 'ZMATERIAL_CREATE'.
Normally it should work. Since Its not working I am trying with another alternative..
i.e EXPORT (ptab) INTERNAL TABLE itab.
My sap version is ECC 5.0.
For your information, here I am forwarding sap help. Pls have a look and explain how to declare ptab internal table.
+Extract from SAP help+
In the dynamic case the parameter list is specified in an index table ptab with two columns. These columns can have any name and have to be of the type "character". In the first column of ptab, you have to specify the names of the parameters and in the second column the data objects. If the second column is initial, then the name of the parameter in the first column has to match the name of a data object. The data object is then stored under its name in the cluster. If the first column of ptab is initial, an uncatchable exception will be raised.
Outside of classes you can also use a single-column internal table for parameter_list for the dynamic form. In doing so, all data objects are implicitly stored under their name in the data cluster.
My internal table having around 45 columns.
pls help me.
Thanks in advance
raghunath

The export/import should work the way you are using it. Just make sure you are using same memory id and make sure its unique - meaning u are using it only for this itab purpose and not overwriting it with other values. Check itab is not initial before you export in program 1 - then import it in prog2 with same memory id...also check case, I am not sure if its case sensitive...
Here is how you use the second variant...
Two fields with two different identifications "P1" and "P2" with the dynamic variant of the cluster definition are written to the ABAP Memory. After execution of the statement IMPORT, the contents of the fields text1 and text2 are interchanged.
TYPES:
BEGIN OF tab_type,
    para TYPE string,
    dobj TYPE string,
END OF tab_type.
DATA:
id    TYPE c LENGTH 10 VALUE 'TEXTS',
text1 TYPE string VALUE `IKE`,
text2 TYPE string VALUE `TINA`,
line TYPE tab_type,
itab TYPE STANDARD TABLE OF tab_type.
line-para = 'P1'.
line-dobj = 'TEXT1'.
APPEND line TO itab.
line-para = 'P2'.
line-dobj = 'TEXT2'.
APPEND line TO itab.
EXPORT (itab)     TO MEMORY ID id.
IMPORT p1 = text2
       p2 = text1 FROM MEMORY ID id.

Shell Script For Export And Import Of Table Records

Hello,
We have production and test instances and for constant testing we need to copy data from production to test or development environment.
At the moment what we do is manually doing export and import table records. At times this could be very tedious as we may need
to do this exercise a couple of times in a day.
Is it a good idea to do this exercise using shell script? If so how could I do this? If this is not a good idea what are the best alternatives?
Any input is highly appreciated.
Thanks

Ah I see, your company prefers stupidity over efficiency. It would be possible to do it in a controlled environment, wouldn't it? Also the test database would be allowed to select only.
So the non-allowance is just plain stupid.
To the second question: do you use hard-coded passwords in shell scripts?
Don't you think that poses a security risk?
Don't you think that is a bigger risk than a database link, properly set up?
In my book it is!
Sybrand Bakker
Senior Oracle DBA

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

Export and import of data not table and data ????

hii brothers and sister
plz i have a a quetion about Export and import of data in oracle forms
i have created 02 boutons one for export his trigger like this :
eclare
alrt number;
v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
path varchar2(100):='back_up'
||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
||v_directory
||'\'
||path
||'.dmp';
begin
host(v_exp);
alrt:=show_alert('MSG');
end;
and the bouton import is like this
declare
alrt number ;
v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
begin
host(v_ixp);
alrt:=show_alert('MSG');
ref_list;
end;
i have just one table "phone"
this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

Pl post OS and database versions.
You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
HTH
Srini

Exporting (and Importing) Just 1 Group

Similar Messages

Maybe you are looking for