Exporting and importing non-sealed MPs to another environment
Hello,
I have a task to rebuild SCOM environment, replace SCOM 2007R2 with 2012R2, there are a lot of MPs with groups of monitoring objects, overrides for some monitors and rules, is it possible to import these MPs to the new SCOM after agent
installation to save all configuration? These objects are saved in the MPs with GUIDs, I think these GUIDs will be changed in the new management group, so I need to create these groups and overrides again, yes? What can I export from old MG and import
to the new MG automatically to reduce manual work? I have found script which can export and import membership of security groups, also all subscribers and notifications are saved in the non-sealed MP. Also I have found small post with information to save
favorite and scheduled reports by backing up and restoring ReportServer database.
Hi,
Yes, we can import saved MP to the new management group to use those saved overrides and groups.
I would like to suggest you follow the link below to do side by side migration from SCOM 2007 to SCOM 2012:
OpsMgr 2007-2012 Side-by-Side Migration Blog Series
http://www.systemcentercentral.com/opsmgr-2007-2012-side-by-side-migration-blog-series/
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Procedure Data Export and Import from One server to another server
Dear all,
I want to transfer my all Production Server data into Quality Server or Development Server. So how can i transfer my all data in this and please tell me procedure for transfer data into different server. and also tell me which server u preferred for store production data. Please help me out as soon as possible.
Thanks in Advance
Keyur chauhan.That is possible throgh Remote Client copy or Client Export Import depends on the size of data which you want to transfer.
http://www.sap-basis-abap.com/bc/client-copy-from-production-to-quality-server-to.htm.
http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
Please go through these links.
I would prefer to transfer the data in QA system so that all the user testing can be done easily.
Regards,
Subhash -
How to export and import database from one laptop to another?
hi,
plz anyone help me to export and import one of my user in the database to another laptop.....
i hav absoulutely no knowledge in doing this, plz some one help to do it from scrap...
thanks in advance for ur kind helpwhat's the oracle version on Source and Target Database release version? Take a look at the below links.
[http://wiki.oracle.com/page/Oracle+export+and+import+]
[Import_Export_FAQ|http://www.orafaq.com/wiki/Import_Export_FAQ]
Export
[Oracle Export Utility|http://www.psoug.org/reference/export.html]
[Oracle Import Utility|http://www.psoug.org/reference/import.html]
HTH
Anantha -
How to export and import on another computer whole database connection
Hi
how to export and import on another computer whole database connection with all contents ?
step by stepFrom the "source" computer do this:
1) Open SQLDeveloper.
2) Right click on the main connections node and choose export connections.
3) Select the connections you want exported and choose a file name and location to save them.
4) Save the file by clicking OK then copy it to the destination PC.
On the "destination" PC assuming you have already installed SQLDeveloper do this:
1) Open SQLDeveloper.
2) Right click on the main connections node and choose import connections.
3) Browse to the connections file you copied earlier and select the connection you saved.
4) Complete the import by clicking OK and you are done.
Mind that this is sufficient only if you have only basic connections, if you have TNS connections you will also need to manually copy the Tnsnames file from the "source" PC to the "destination" PC and set the
Tools -> Preferences -> Database -> Advanced Tnsnames directory
to the directory where you copied the Tnsnames file. -
Question regarding export and import of Hyperion Security during upgrade
Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
KIhatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/ -
SQL Developer 2.1: Problem exporting and importing unit tests
Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team -
Exporting and importing applications/workspaces
I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel -
Exporting and Importing Destination Controls Error
When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
DHCP Server does not work after Exporting and Importing Using Netsh Command
Hello Friends :
I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
srv-1 : windows server 2003 + DHCP = working with no problem
srv-2 : windows server 2003 + DC + DHCP = Worked without problem
srv-3 : windows server 2008 R2 + DC = worked without any problems
I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
1- I have authorized it
2- I used Rogue Checker tool in client computers they see authorized server without any problems
3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
4- Bindings are OK and DHCP servers only have one NIC installed on them
What can i do to make sure my srv-3 DHCP server will work on the network ?
thanks ...
MIMOAre the clients on another network so you need to configure a DHCP relay agent?
If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
Have you check event viewer for any warnings or errors?
And the classic one restarted the dhcp server service (or reboot)?
Regards Per-Torben Sørensen http://pertorben.wordpress.com/ -
Use of export and import in oo abap
Hello experts,
We are new to oo abap and using process controlled workflow for BRF.
There are 3 methods which we are using. /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP, /SAPSRM/IF_WF_AREAGET_RESPONSIBLE_APPROVERS and /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID.
In a situation we want to use document_id which is created in item_map into get_responsible_approvers method.
Therefore, we used export and import in these two methods like the following.
zgc_mock_pdo_guid = is_document-document_guid. "uncomment later
export zgc_mock_pdo_guid from zgc_mock_pdo_guid to memory id 'Z_MOCK_PDO_GUID' . "uncomment later
and
import zgc_mock_pdo_guid = zgc_mock_pdo_guid from memory id 'Z_MOCK_PDO_GUID' . "uncomment this later
CALL METHOD /SAPSRM/CL_WF_APV_FACADE=>RETRIEVE_PROCESS_HISTORY
EXPORTING
IV_DOCUMENT_GUID = zgc_mock_pdo_guid "ins_guid
IV_AGENT_ID = lv_agent
IV_LANGUAGE = sy-langu
IMPORTING
ES_PROCESS = ls_process
Now we are getting the results as per our requirements. But I want to know whether or not it is supposed to be used in oo abap context or not otherwise I will find another method to do so. Please advise/suggest about the same.
Thank you.Hello Keshav, Suhas.
Thank you vary much for your reply. I was definitely a great help to understand the concept.
This ZGC_MOCK_PDO_GUID attribute was already made private. Instead of defining under public section I defined it under attributes tab.
Thank you for your help though.
Right now I am trying to explore another way to do so.
I am trying to get factory instance for tack container using /SAPSRM/IF_CLL_TASKCON_FACTORY interface with method GET_INSTANCE from class /SAPSRM/CL_CH_WD_TASKCONT_FACT.
Later I am trying to get task container from this interface. Then after I am interested to get SC GUID using GET_BO_GUID method.
I have been trying to achieve this in following way. But somehow i am getting this GUID empty.
data :
temp_task_container_factory type REF TO /SAPSRM/IF_CLL_TASKCON_FACTORY,
temp_instance type REF TO /SAPSRM/IF_PDO_BO_SC_ADV,
ins_guid type BBP_GUID, "/SAPSRM/WF_DOCUMENT_GUID,
ls_process_info TYPE /SAPSRM/S_PDO_WF_PROCESS_INFO,
temp_handler TYPE REF TO /SAPSRM/IF_PDO_STATIC_META,
temp_task_container type REF TO /SAPSRM/IF_CLL_TASK_CONTAINER,
lo_task TYPE REF TO /SAPSRM/IF_CLL_TASKCON_FACTORY.
CALL METHOD /SAPSRM/CL_CH_WD_TASKCONT_FACT=>GET_INSTANCE
RECEIVING
RO_TASK_CONTAINER_FACTORY = temp_task_container_factory "
CALL METHOD TEMP_TASK_CONTAINER_FACTORY->GET_TASK_CONTAINER
* EXPORTING
* IV_TRANS_MODE =
* IO_MESSAGE_HANDLER =
* IV_BO_TYPE =
RECEIVING
RO_TASK_CONTAINER = temp_task_container
CALL METHOD TEMP_TASK_CONTAINER->GET_BO_GUID
RECEIVING
RV_BO_GUID = ins_guid .
TRY.
CALL METHOD /SAPSRM/CL_PDO_FACTORY_SC_ADV=>GET_BUFFERED_INSTANCE
EXPORTING
IV_HEADER_GUID = ins_guid
RECEIVING
RO_INSTANCE = temp_instance
ENDTRY.
CALL METHOD ZCL_WF_APV_FACADE=>RETRIEVE_PROCESS_HISTORY
EXPORTING
IV_DOCUMENT_GUID = ins_guid " we are passing ins_guid instead of zGC_MOCK_PDO_GUID this should have area_guid now.
IV_AGENT_ID = lv_agent
IV_LANGUAGE = sy-langu
IMPORTING
ES_PROCESS = ls_process.
But the ins_guid ( returned by RV_BO_GUID ) is empty ( The Bold fonted line of code)
I want to know whether I am doing this instantiation correctly or not or do I have to create class and object here only ?
Right now I am calling the class, getting get_instance and using its instance temp_task_container_factory i am calling interface /SAPSRM/IF_CLL_TASKCON_FACTORY. Is it correct way? PLease advise. Thank you once again.
Edited by: abhijitkamatkar on Feb 7, 2012 1:38 PM -
Internal table export and import in ECC 5.0 version
Hi friends,
I am trying to export and import internal table from one program to other program.
The below export and import commands are not working when I run the program in background (using SUBMIT zxxxx via JOB name NUMBER number ..)
EXPORT ITAB TO MEMORY id 'ZMATERIAL_CREATE'.
IMPORT ItAB FROM MEMORY ID 'ZMATERIAL_CREATE'.
Normally it should work. Since Its not working I am trying with another alternative..
i.e EXPORT (ptab) INTERNAL TABLE itab.
My sap version is ECC 5.0 .
For your information, here I am forwarding sap help. Pls have a look and explain how to declare ptab internal table.
+Extract from SAP help+
In the dynamic case the parameter list is specified in an index table ptab with two columns. These columns can have any name and have to be of the type "character". In the first column of ptab, you have to specify the names of the parameters and in the second column the data objects. If the second column is initial, then the name of the parameter in the first column has to match the name of a data object. The data object is then stored under its name in the cluster. If the first column of ptab is initial, an uncatchable exception will be raised.
Outside of classes you can also use a single-column internal table for parameter_list for the dynamic form. In doing so, all data objects are implicitly stored under their name in the data cluster.
My internal table having around 45 columns.
pls help me.
Thanks in advance
raghunathThe export/import should work the way you are using it. Just make sure you are using same memory id and make sure its unique - meaning u are using it only for this itab purpose and not overwriting it with other values. Check itab is not initial before you export in program 1 - then import it in prog2 with same memory id...also check case, I am not sure if its case sensitive...
Here is how you use the second variant...
Two fields with two different identifications "P1" and "P2" with the dynamic variant of the cluster definition are written to the ABAP Memory. After execution of the statement IMPORT, the contents of the fields text1 and text2 are interchanged.
TYPES:
BEGIN OF tab_type,
para TYPE string,
dobj TYPE string,
END OF tab_type.
DATA:
id TYPE c LENGTH 10 VALUE 'TEXTS',
text1 TYPE string VALUE `IKE`,
text2 TYPE string VALUE `TINA`,
line TYPE tab_type,
itab TYPE STANDARD TABLE OF tab_type.
line-para = 'P1'.
line-dobj = 'TEXT1'.
APPEND line TO itab.
line-para = 'P2'.
line-dobj = 'TEXT2'.
APPEND line TO itab.
EXPORT (itab) TO MEMORY ID id.
IMPORT p1 = text2
p2 = text1 FROM MEMORY ID id. -
Shell Script For Export And Import Of Table Records
Hello,
We have production and test instances and for constant testing we need to copy data from production to test or development environment.
At the moment what we do is manually doing export and import table records. At times this could be very tedious as we may need
to do this exercise a couple of times in a day.
Is it a good idea to do this exercise using shell script? If so how could I do this? If this is not a good idea what are the best alternatives?
Any input is highly appreciated.
ThanksAh I see, your company prefers stupidity over efficiency. It would be possible to do it in a controlled environment, wouldn't it? Also the test database would be allowed to select only.
So the non-allowance is just plain stupid.
To the second question: do you use hard-coded passwords in shell scripts?
Don't you think that poses a security risk?
Don't you think that is a bigger risk than a database link, properly set up?
In my book it is!
Sybrand Bakker
Senior Oracle DBA -
Is it possible to overwrite the master files with the versions without having to go through the entire process of exporting and importing back the images?
Thnx in advanceA small refinement if you shoot RAW. Remember, no RAW file can ever be edited or rewritten. Thus, in the old days, the flow was:
RAW>TIFF/PSD and you ended up with two large files. (This is why some folks used to delete the RAW Masters.)
With Aperture the flow is something like:
RAW+Version(s) Only the Version is only 30 KB. (There is, of course, additional overhead of Thumbs and Previews, but, depending on your settings, this is only a fraction of the size of a TIFF or PSD.)
You question goes right to the heart of the concept of a non-destructive workflow. With Aperture you always preserve your original Master file; the only things that are ever at risk are your edits (called Adjustments). Ironically, this is even more valuable if you shoot JPEG or TIFF as those files could be rewritten.)
Aperture goes to great lengths to give you the best of both worlds; you always have the Master to revert to and your "edits" take up very little disk space. And you don't have to waste time trying to sync folders of RAW, TIFF, and JPEG. Similarly, you never have to worry about resizing images, changing color spaces, or any number of other things that get locked into an image file when you use a destructive workflow.
Remember, Aperture will happily Export files in any format you may need. Export 'em, use 'em, delete 'em - your Masters are still safe in Aperture.
DiploStrat -
Hi,
I am having one doubt regarding Client export and import
In my organization we are having three system landscape, but the Quality and Production server(In Process)
Development box is ready to use, and we are having another sand server in different location for our consultant practice
that system is not in our landscape and that is different location,i want to import that client in to my development server hear
It is possible to export that data from that Client(scc8) copy that in my development server and Import(scc7) is possible..?
if possible than what are the pre-requisites to do That Export and Import of client between two different systems,
what is best procedure to do this Task.......!
Regards'
Mohammed.Khan>>once export is done successfully than can i copy those exported file in to my file server and then copy to my development >>system trans directory (cofiile,datafile) than can i import those files in my development server with *stms_import* command
Yes, you have to
>>than can i go for client import(scc7)
Yes.
>>***Configuring the TMS between that sand box and my development server***
Not required but yes if the sandbox server is not in the landscape you have to create a Virtual System in sandbox and you have to configure the Transport, then only you would be able to create the export file
Regards
Subhash -
View and Edit properties pages are not woriking after export and import in sharepoint2013
Hi,
After performing Export and Import in SharePoint 2013 for a subsite, metadata is missing in document library. 404 error triggers on clicking both View-properties of an item and /Forms/DisplayDocument.aspx.
Please help me in this.
Regards,
GurudattaWhile uploading, after browsing the document clicking on OK button giving below error.
Nothing is generated in Event logs. Below are sharepoint logs.
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x499C SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=/QAPortal/PackingMaterial/frmFile4&Source=http://siteurl/frmFile4/Forms/AllItems.aspx?InitialTabId=Ribbon%252EDocument&VisibilityContext=WSSTabPersistence&RootFolder=%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1) 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x499C SharePoint Foundation
Request Management adc7u Medium Mapping URI from 'http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1'
to 'http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%2... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.44* w3wp.exe (0x5234) 0x499C SharePoint Foundation
Request Management adc7u Medium ...52FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1' 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1)).
Parent No
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1) 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.46 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|usl\hclspp, ClaimsCount=23 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Information Rights Management 5202 Information Information Rights Management (IRM): Requesting user email address is empty. 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High UserAgent not available, file operations may not be optimized.
at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo&
fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm,
Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest&
dbreq, SPDocumentBindResults& dbres... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, ... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbst... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid&
pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies,
String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String
bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent,
UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied,
Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)
at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage,
String& siteRoot, Guid& siteId, Int64& bytes, ... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...Guid& docId, UInt32& docVersion, String&
timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean&
ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean&
isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object&
buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...String& siteRoot, String& redirectUrl, Object&
oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String
virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback
cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr
nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus&
notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files aiv4w Medium Spent 0 ms to bind 13297 byte file stream 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 mssearch.exe (0x1B6C) 0x3F24 SharePoint Server Search Crawler:Content
Plugin ajjig Medium CSSFeeder::ReportPingSession: the session 86ba63af-ce5a-4c7c-a836-c70ee9961b91 has been pinged by PollCallbacks
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Information Rights Management ai4ko Medium Information Rights Management (IRM): The IRM status of the document [] is: untried (-1), the return values is: 0x0. 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ahjkm Medium Spent 0 ms to send 13297 byte file stream 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Logging Correlation Data xmnv Medium Site=/ 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=66.9455 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.57 w3wp.exe (0x2CE0) 0x45CC SharePoint Server
Logging Correlation Data xmnv Medium Name=Task: SessionManager.PerformOngoingRequestDepartures 6b6b4445-2b72-0002-9138-988147c881a0
07/16/2014 17:32:08.58 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
General g3ql High [Forced due to logging gap, cached @ 07/16/2014 17:32:08.55, Original
Level: Verbose] GetUriScheme(/QAPortal/PackingMaterial/frmFile4) 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.58 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process
identity 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.64 OWSTIMER.EXE (0x1ED4) 0x5B18 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope
Maybe you are looking for
-
Share music with another iTunes account
Getting my wife an I phone,her first I device. I have had an iTunes account for a while and would like to share what I have with her. How can I share content with her iTunes account?
-
How to create dynamic tree based on BAPI
Hi I am able to create dynamic tree based on flat file structure example given in SDN . But how to create the tree from BAPI directly.Also when I will be clicking on any leaf node of the tree some data related to the node will be passed to another vi
-
Memory error while SYSTEM Copy using sapinst
Hi Experts, I'm trying to do a system copy of portal sp14 from Dev to sanbox. I have exported from Dev and I'm in Sanbox phase 38 of 41 Install Java engine I'm getting following error. Create SDM directories: Create SDM home directory: Directory for
-
Hi, I want active Budgeting Control system in SAP. Please let me know how I can activate, from first step to last step. Please help me. Thanks & Regards, Hemant Maurya
-
Importing - tape vs. hard drives; do drives remove a lot of problems??
I admit I am an infrequent user of FCE (current version 3.5.1) and I think the reason is the difficulties in importing. I have Tom's books, I follow the instructions and suggestions from this forum, but for the life of me, I normally have problems. U