Exporting and Printing Page Setup is Different to Screen

Hi All hope someone can help.
I've created a document in Pages and all the formatting is fine on the screen and if I view the file in quick view but if I print or convert to PDF it seems to about 70% of full size with a huge margin in the left, top and bottom.
I"ve triple checked my page setup and all is fine and as the file looks good in quick view I'm wondering if something is wrong when it exports. I have no idea where to go from here.
All help graciously received.

Do you have the Comment field on? That is the only way I can reproduce the described behavior.
Go View > Hide comments.
!http://img293.imageshack.us/img293/884/commentfield.jpg!

Similar Messages

Ps CS5 "Print Page Setup" dialog will not open

Hello: I was printing via my Photoshop CS5.
I accidentally created a paper size of 0cm x 0cm and attempted to print (up to this point Photoshop and Print worked).
I now (permanently) get an error message: "There was an error opening your printer. . . "
Photoshop >File >Print. . . will not open the Print Page Setup.
Photoshop >File >Print one copy (works, but still tries to print 0cm x 0cm, the printer spits out a blank page).
Using the (Mac/Apple) app 'Preview' I deleted the paper size preset '0cm x 0cm'.
apps; Preview, Text Edit, Mail, Word, . . . all print properly (they can open the 'Print Page Setup' dialog).
I set up two other printers (now three in total) and they work with all applications (except Photoshop).
I uninstalled and re-installed Photoshop and my printers, including all their preference files.
Also, I again deleted Photoshop preference files by opening Photoshop while pressing 'Shft-Opt-Cmd'.
In 'System Preferences' >Print & Fax >Printers; I reset my computer's "Printing System".
I repaired 'Disk Permissions', Safe Boot and have also done multiple restarts.
Since only Photoshop has a problem, I believe Photoshop has (somewhere) set a preference thinking it's default paper size is 0cm x 0cm which is throwing an error and preventing the 'Print Page Setup' from opening.
I updated Photoshop Adobe Air, Printers, . . . after re-installing.
I ran an app that clears my computer's caches.
I reinstalled (and updated) my computer's operating system (OS only, not my account and data).
I would appreciate your help. Thank-you, M_L_R
Mac OS: 10.6.8, Apple/MacPro 2009, 2 x 2.93GHx 8-Core processors, 16GB of Ram (DDR3 1066 MHz)

Hello: I repaired my (Print: Page Setup. . . dialog panel will not open) problem.
The fix was one of the many suggestions I researched in the 'Adobe Help'.
    Unfortunately I dismissed this solution (until now).
    reference: http://helpx.adobe.com/photoshop/kb/error-install-printer-photoshop-cs4.html
        see >Solution 7: Create a different user account and run Photoshop as that user.
Some of the (following) procedures may not be necessary, but the core solution is in there. . .
    Mac OS X v10.5 or later >System Preferences >Accounts >Guest Account (sharing only) >Allow guests to log in to this computer >Automatic Login (for Administrator, still active - optional) >then log out of the (main/administrator) account >then Log in to the guest account >go to the applications folder (in the guest account) >open Photoshop >create a new simple document (example: create one text letter) >Print. . . (in this situation Print: Page Setup. . . the dialog panel opens [remember: this is the error problem in the main account]) >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >Log out (of the Guest account) >Log in to your regular (main/administrator) account >the Guest account can now be deactivated (optional) >open Photoshop (in your main account) >test print a simple document >the (Print: Page Setup. . .) dialog panel now opens >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >the (Print: Page Setup. . . dialog panel will not open) problem is repaired. Bye for now, M_L_R

Export and print logging

Hi experts:
If we need to track records in regard to the exporting and printing behavior of users, that is, the usage of "export answer" or "print answer" functionalities on dashboard, is there any log files saved during the process? If yes, what's the files name?

hi 12261114,
A) cheat. create a single report using UNION ALL, you might add a different "TYPE" column, and setting a column break with that column (move it to the front, break column 1). probably reports have different number of columns, add NULL columns in a query when using UNION
display this/hide other reports when page in print mode, or some other state. you can have a dropdown or a checkbox for that.
create page item if needed for switching page to print or other mode
B) show all lines on all reports. use PDF printer on client site.. ..no CSV though
Simon

Export and print of Peports

Hi All,
I got stuck with a problem. Need your help.
Actulally, I have 5 reports in a single page and have to provide common export and print functionality so that
all the reports get exported in a single excelsheet and get generated in one PDF.
Thanks
PK

hi 12261114,
A) cheat. create a single report using UNION ALL, you might add a different "TYPE" column, and setting a column break with that column (move it to the front, break column 1). probably reports have different number of columns, add NULL columns in a query when using UNION
display this/hide other reports when page in print mode, or some other state. you can have a dropdown or a checkbox for that.
create page item if needed for switching page to print or other mode
B) show all lines on all reports. use PDF printer on client site.. ..no CSV though
Simon

Microsoft Project 2013 Reports Print Page Setup Issue

Hi Guys,
I'm trying to print multiple reports together, is there any way i can setup the print page setup ( headers and footers ) so that i don't have to set it up for each report?
another issue i'm having is also say i set a print page setup( header and footer) for a specific report, then i change to a different report, then when i go back to the first report to print again the page setup settings is gone!
any help would be much apprecaited

Hi Reza,
This should be possible if you have applied headers and footers to a non-enterprise view, such as the Gantt Chart view, resource sheet view etc. In this manner we can retain the Header and Footer information in the project after
saving and closing it. (The header and footer information will be available only from the view in which you have applied it)
Hence, if we have customized the Header and Footer in the Gantt Chart view, you will be able to view the same in Resource Usage view.
Regards,
Dinesh S. Rai

Testing Export and print of additional web items

Hi,
Please do let me know how to carry on testing for Export and print of additional web items.
Thanks & Regards,
Lavanya.

Following are some of the things you should test -
Export -
1. Exporting to File: For different file types check the way data is getting extracted as compared to report results in URL. Here you need to check - a. if the correct values are getting exported (w/o any conversion of data types, or any format changes). b. Layout of the exported data (ex. row data is appearing in rows, etc.),
2. Check files for any missing data.
3. Check if exporting the data, with selected drill levels, filters, etc. is working fine (or is exporting everything irrespective of the data from current report reults).
Print -
Print your report using the default printer on your machine & check the following -
1. Reports is getting printed as expected in terms of data & layout.
2. The rows or columns are well within the page defined in your printer settings (ie nothing is running out of page).
3. When printing, change in orientation works for both the options without any loss of data.
All web items will not be printed, so you need to make a note of this.

Crystal Reports export and print fails with SSL / https but works with http

Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.

Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
            Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to PDF : nothing happened.
2: Print:
            Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much!

CR 2008 paramteres, export and print windows language localization

Hi, i want to use in my application Crystal Reports. I installed a trail version of CR 2008. My application is written in Delphi 7. I connected my application with Crystal Reports through the official VCL downloaded from http://ftp1.businessobjects.com/outgoing/products/vcl/crystalvcl11.zip and edited it to work with CR 2008 (12.x.x.x).
Everything works with this VCL. When i have parameters the Enter Values window where i enter the values for parameters and in the Viewer window the Export and Print Dialog are in English. I want to have them in Polish Language ( or operating system language). In CR i set in View -> Preferred Viewing Locale -> More ... Polish but the viewer window, export, print and parameters are still in English. I tried this also on computers without installed CR 2008 but installed CR Runtime and it is still English.
Operating system in Windows XP SP3 Polish.
Any ideas what i can do to have this windows localized in my language?
Robert

Hello Robert:
I am not sure that you will be able to do much. The VCL has not been updated since version 10 of Crystal Reports and it may be that the functionality you require will just simply not be possible. (I'll get someone else who used to work with the VCL to have a look too.)
In the meantime, you may want to have a look at the following:
Go [here|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm], then check out Crystal Reports .NET SDK > Tutorials and Sample Code > Other Tutorials > Configuring Multilingual Client Support. (The above is for CR XI R2, it's the same for CR 2008 - I just don't have a link handy.) I am not sure if the above will help.
Also, note that you do not have to use the VCL. You can use the CR assemblies for .NET with Delphi. See the following for more details:
/people/trevor.dubinsky/blog/2009/10/09/introduction-to-delphi-prism-applications-development
/people/trevor.dubinsky/blog/2009/10/19/delphi-prism-how-to-setup-the-environment-for-crystal-reports-2008-and-bobj-enterprise-r3-development
/people/trevor.dubinsky/blog/2009/10/26/crystal-reports-and-enterprise-net-developer-resources
Samples:
[Net Delphi CR2008 Simple Previewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f71e6a-cc13-2d10-7c8c-e38ce6d278be]
[Net-Delphi-CR2008-LogonInfo-subreport|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f02665e4-cc13-2d10-b180-e0a7b3770ae3]
[Net-Delphi-BOE12_Simple_View_Report|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/702f1223-cc13-2d10-c383-967a1e8d11ac]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

CR Viewer tool bar images are missing; Export and Print are not working

Hi There
I used Crystal report 10.5(VS 2008 base crytal report -- CRRedist2008_x86.msi), i developed ASP.net application using VB.net program(i used .net 3.5). One of the pages in the application is having crystal report viewer, which is calling a crystal report to populate the result. The report is working as expected on development machine (Win Vista). Hence, I moved the application onto Server (Windows Server Web; 32Bit OS and IIS). I installed the CRRedist2008_x86.msi, which added the "aspnet_client" under default website. As my site is a made as an application under default webiste. I tried...
a) By copying the aspnet_client folder into the website folder
b) By adding a virtual directory called "aspnet_client" under my website pointing it into the folder under "default website"
None of the trials are working for me.
When I click on Print or Export buttons (although their images are missing), I get the error sigh on bottom left (status bar) of the browser and the popping up the same giving me below error details
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; InfoPath.3; MS-RTC LM 8; .NET4.0C)
Timestamp: Tue, 2 Nov 2010 15:11:12 UTC
Message: Object doesn't support this action
Line: 41
Char: 1
Code: 0
URI: http://65.123.xxx.x:37188/xyzweb/(S(uhgxkx45iwlrbancwzfunp55))/reportpage.aspx
Any help in resolving this issue would be greatly appreciated.
Thank You,
Edited by: skbo007 on Nov 2, 2010 4:11 PM

Hello All.
I am excited to let you know that the issue is being resolved.
Here is steps that lead me to resolution and solution..
I installed Fiddler2 and looked into every the debugging details of the transaction while running the report.
Learned that the crystal report is using the aspnet_client foler under "Default website" NOT under the crrent website.
Hence I tried to access the image via http path from local machine
http://myserver/aspnet_client/system_web/2_0_50727/CrystalReportWebFormViewer4/images/toolbar/export.gif.
(Notice, "mysite" folder is been removed)
I was expecting to see the gif on my browsers' body. It gave me an error.
Investigated further more on the error and found that the "Managed Pipe Line" of the respective application pool is to be changed to "Classic" instead of "Integrated"
changed it .. Boom...
Tool bar is showing up with proper images and as well the "Export" and "Print" functions are working as expected..
Hope this helps to those in the same situation.
Again.. this is one of many many solutions on this issues.
Thank You
Edited by: skbo007 on Nov 3, 2010 9:42 PM

Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?

adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

Is there a way to export and print the browser data as a spread sheet?

I'm in the process of logging approximately 1,500 shots for a documentary (the old fashioned way - long hand: shot #, TC in, descriptions... ) and I'm wondering if there's a way to export and print the data in the browser as a spread sheet. It seems like a pretty simple thing, but I don't see it any where. Am I missing something?

Yes, people I work with use it, assistants fill the fields out for me. As far as I know there is no "Print Browser" option. Some folks have assistants copy and paste the info into text, csv or xml files. Since everthing has gone to meta tags, this approach is going the way of the electric spoon or feeding mayonnaise to Tuna.
Peace & Covering Fire,
B.S.

Export and Print icons missing from report viewer

I'm currently embedding crystal within a wicket application in which I'm making use of the getHtmlContent() method to retrieve the report's HTML. For whatever reason, I'm not able to get either the export or print icons (on the top left side of the viewer). Is this because I'm using the getHtmlContent() method or do I have something misconfigured somewhere? Setting the setHasExportButton(true) and setHasPrintButton(true) on the report viewer object has no effect.
If I run the same report using the generated JSP outside of my application (within tomcat), I see the export/print buttons. I notice the JSP makes use of the processHttpRequest() method. Any help will be greatly appreciated.
Thanks!
Louis

Hi Louis
- The getHtmlContent() method handles the user's request to generate the HTML for the report and returns the HTML as a String.
Note: Either the getHtmlContent method or the processHttpRequest method can be used to handle the user's request to generate the HTML for the report, depending on how you write your JSP. If the viewer's content is displayed more than once, then the getHtmlContent method is more efficient, because the request is processed once and the resulting HTML string can be used multiple times. In this case, you must set the content type of the HTML, as recommended in the table. Additionally, using getHtmlContent sets setOwnPage to false and disables exporting and printing.
- The setOwnPage(true) and processHttpRequest() method should be used if you want the export and print button to appear in the report viewed through Crystal Report Viewer.
Following is the snippet of code which shows you how to use these 2 methods.
//Get the IReportSource object from sesion and pass it to the viewer
     IReportSource reportSource = (IReportSource)session.getAttribute("reportSource");
Create the viewer and render the report -
     //create the CrystalReportViewer object
     CrystalReportViewer oCrystalReportViewer = new CrystalReportViewer();
     //set the reportsource property of the viewer
     oCrystalReportViewer.setReportSource(reportSource);
     //set viewer attributes
     oCrystalReportViewer.setOwnPage(true);
     oCrystalReportViewer.setOwnForm(true);
     //set the CrystalReportViewer print mode
     //oCrystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
     oCrystalReportViewer.setPrintMode(CrPrintMode.PDF);
     //process the report
     oCrystalReportViewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
Hope this helps you .
Thanks
Soni

How to change the print page setup in IE using javascript

dear all,
I want to take print out envelope paper size, so i want to chnage the page setup in IE
i want to change the print page setup in IE using javascript

I think, you can do this using CSS.
http://support.sas.com/rnd/base/ods/templateFAQ/Template_csstyle.html

PDF Export And Printing Problem

I am using VB 2005 and the Crystal Reports that is bundled with it. I have reports on my website in the Crystal Report Viewer. I have the tool bar showing the Export and Print buttons. When you try to print (or export to PDF) you get an error from Adobe Reader "Adobe Reader could not open 'AcrXXX.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
I can see the file in my temp folder on my c-drive and the file (AcrXXX.tmp) does not contain a pdf instead it contains html for the report (including the report viewer). I tried deleting everything in my temp folder and I still get the error. My desktop is Adobe Reader 8.0 and IE 6 and Windows XP.
The same code will create the PDF on all development and test web servers just not on my production server.
I have no problem exporting a report to Word.

Hello Wendy,
if you are not too sure whether this errro is CR or VS related pls simply try to use one of our samples and see if you can export from htere or if you get the same error:
Sample site for NET:
https://boc.sdn.sap.com/dotnet/samples
general docu:
https://smpdl.sap-ag.de/~sapidp/012002523100005853792008E/walkthrough_supportfiles.zip
specific samples:
https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe

[CS5.5] Lock PDF export and print presets

Hi,
With this post I would like to ask a question regarding locking certain features in Indesign.
Does anyone know if it is possible to ...
- lock PDF export and print presets so a user is not abble to change/override any preset properties, and is forced to use a preset without the possibility to override any of the properties when using it?
- force a user to use one of the predefinied presets to print or export a document without the ability to create a new preset?
- verify PDF-files to check what Indesign print/export preset was used?
Being part of a larger prepress team, we would like to make sure that, every PDF-file created by each team member, is created with the same specs.
Does anyone know of any plugin, tool or release that enables such a functionality?
Kind regards
John

If the employees cannot follow company policy, they need to know that there are other people looking for work who can. Yes, mistakes happen, but that would be a case of choosing the wrong preset from a list (which, if you leave more than one installed, can't be avioded). Changing settings against policy is not a mistake.

Exporting and Printing Page Setup is Different to Screen

Similar Messages

Maybe you are looking for