Exporting and video lag??
i am having some troubles exporting to quicktime format?
i have done some speeding up of the video to fit to an audio file and when i export it...the resulting file seems to keep the video at the original speed...it plays back perfectly how i'd like it in final cut but the exported file doesn't maintain the videos speed so it ends up laggin the audio...
any help please??
Self contained simply creates a new clip, which is independent of any media...plays by itself and is transportable. Non-self contained is essentially a 'rendered' version, which relies on media resident on your computer...not transportable or uploadable.
I'm unfamiliar with all aspects of MPEG4, but my guess is that it is not an 'editable' format. You may need to use MPEG Streamclip to convert it to a DV-NTSC or some such format that FCP can edit with. You would likely need to also convert your mp3 to aiff.
Then, you should be able to add speed changes and whatnot and render/export successfully.
That's a guess, so hopefully others with better info will chime in.
K
Similar Messages
-
Yet another question about exporting and video quality
Kind people,
I know this question has been asked many, many times, and I have searched and read up of the topic, but I would also like to ask it.
I shot my video on a Canon Vixia HF10, downloaded it to Final Cut Express to edit, exported it as Quick Time Movie, dropped it in iDVD, then played it on my TV and the quality was…..not good. The video was a little fuzzy and there were ghosts. Are there any settings I should go back and check in iDVD.
WolfgangHi(Bonjour)!
What is the format recorded by this camera?
How did you capture/ingest your video material in FCE?
What was your sequence format in timeline?
How did you export your sequence (specify exact steps, menus and command)?
What was your iDVD project settings?
What was the iDVD quality setting?
Did you monitor your DVD on computer screen or TV set?
Michel Boissonneault -
HP ENVY TouchSmart 4 Ultrabook - Sound and Video Lags and Distortions
This issue has been previously reported and noted as solved, but it is not solved. See the link to the other post below.
Ways in which I attempted to address this myself...
I first re-installed all drivers and updates, including BIOS updates. After that didn't fix the problem, I did a full wipe/re-install of windows 8, and again, updated all drivers from the HP website. This issue happens on both Windows 8 and Windows 8.1. I then did an exchange, and even the new exchange ultrabook is experiencing this issue. HP technicians, there is something faulty with this device. Please acknowledge and address ASAP.
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Distorted-sound-on-my-Envy-TouchSmart-4-Ult...Its crazy
Check the System
HP Software Framework must for IDT Sound Driver
Intel Chipset Installation Utility and Driver must the new for Windows 8.1
Intel Management Engine Interface (MEI) must the new for Windows 8.1
UEFI for your Notebook
Adds the Audio Test.
Provides improved support for tablet systems
or test October 10, 2013
ftp://www.compaq.com/pub/softpaq/sp63501-64000/sp63852.exe
Please test the same with HP System Event Utility
ftp://www.compaq.com/pub/softpaq/sp63501-64000/sp63805.exe
Newest IDT November 11, 2013
ftp://www.compaq.com/pub/softpaq/sp63501-64000/sp63940.exe
deactivate or remove antivirus application for installation, Download Select the correct manufacturer and remove the software
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. -
I flashed the BIOS on my 875P NEO-FIS2R (old 1.x version Neo) to 2.0 and now all my games have significatly lower frame rates. I've tried installing the latest drivers for EVERYTHING in my computer and nothing seems to help. Is there a setting in the BIOS that I forgot to reset that would cause this or anything similiar?
Thanks in advance!Quote
Originally posted by Danny
Quote
where can you get this from?
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=434&kind=1
cheers danny u da man -
Hello
Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
MacBook Pro -
G60 series Windows 8 NO SOUND VIDEO LAG
Recently upgraded my G60 from Windows 7 to Windows 8 and immediately experienced NO SOUND and VIDEO LAG issues. After searching online extensively I came to conclude that it's a driver issue that HP needs to resolve.
Please kindly reply my thread if fellow G60 owners are experiencing the same problem so HP would take this issue seriously and provide us a fix ASAP
Have a great day!Hi:
HP will not be providing W8 drivers or support for any PC purchased prior to October 1, 2011.
http://www8.hp.com/us/en/ad/windows-8-offer/about-upgrading.html
Paul -
My student made a lyric video in after effects, used keyframes, several layers within several compositions which were then converted into one composition and layered with the song. Once he exported to .mov there were several problems. Music was not heard, video lagged, video duration was cut, and combination of all three problems with each export with various setting changes. Can you please tell us how to export with correct settings to avoid all of these problems in the end .mov?
Thanks,
Troubled Teacher, Stressed TeenIt sounds like a few things are going on:
I'll assume the term "lag" more accurately means, "it's playing in fits & starts -- it's not smooth playback". Here's why:
FAQ: Why is my output file huge, and why doesn't it play back smoothly in a media player?
In there, you'll also find a link to make files that play back smoothly.
Why is there no audio? Probably because the audio check box wasn't checked in the Output Module in the AE Render Queue. Here's more:
FAQ: Why is there no audio (sound) in my output file?
And the most common reason for a too-short file is an incorrectly-adjusted Work Area in the comp being rendered. To fix this, open the comp. Hit the Home key. Hit the b key to set the beginning of the Work Area. Hit the End key. Hit the n key to set the end of the work area. The Work Area is now the same as the comp's duration. If the comp is longer than the intended file length, just adjust the end of the work area. -
Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine. I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing. Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error. It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in. Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
Any help would be much appreciated.
GerryHi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry -
How is the best way to export my project with clips and videos?
I would like to save my project and export the project with clips and videos included. What is the best way to do it?
Can you clarify:
clips and video
Seems as though you want to retain the original media?
Export as a Master File to get a good quality export file of your Timeline.
Al -
I have the latest version of Adobe Premiere, CC 2014 but whenever I want to render and export a video that is typically 70 megabytes in size I can't seem to always see how big the file will end up being for all the formats and I don't want to end up with a video larger than 250 to 300 megabytes in size just for the extremely best or highest quality even though I want the video to be well polished and in better quality than I usually get thee, These videos are usually imported as mp4. What file version of mp4 or otherwise would give me an originally imported video of 70 megabytes an output of no more than or around 300 megabytes or even less without compromsing video quality? I don't want a huge file size as I am uploading it to my YouTube channel via their web interface on another person's machine and they don't have Premiere and only has a DSL connection. So what video output settings should I use for a good quality video that isn't smaller than the original but the same size or a bit higher and not extremely large like MOVs and sometimes mp4s usually are depending on what you do to it and it is outputted.?
Export
Format: H.264
Preset: YouTube (make sure this matches the dimensions of your sequence)
You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
You can also do further reading on Video Bitrates. -
I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!
video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR -
Exporting a video that is 3 minutes and it keeps saying that it is 43 minutes
This seems like a strange problem. I have been duking it out with the frequently asked questions forums and nothing seems to address this problem.
Just to give you an idea of what I have going on.
I am using a mac book pro with OS X version 10.6.8 I have 2.4 Ghz intel core 2 duo and 4 GB 1067 MHZ DDR3
I have edited some video together of an interview. The original clip was about 20 minutes and I have cut it down to around 3 minutes 37 seconds. I made sure to go through and delete any scraps that would have been hanging out at the end of the time line. I have also tried putting timeline markers in at the beginning and end of the project. I have also pulled the grey start and finish bars to just the right places. at 00:00:00 and 03:37:14.
I have tried exporting other videos and everything worked just fine. But for some reason it keeps saying that this video is 43 minutes long and it adds 40 minutes of black to the end of it as well as making the file size really big. I am sending this video to a potential client and I need to keep it under 2 G. I can't send it with 40 minutes of black on the end.
I am using these settings
presets NTSC DV 16:9
file type Quick Time
frame size 720x480
frame rate 29.97
audio settings 48000 Hz stereo 16 bit
Duration 43 minutes 16 seconds.
The worst and best thing is about this. I figured it out at the end of typing all of this
So if anybody has this problem
You have to check the box the says work space onlyFor the crashes, Reed, I would create a new Discussion/Thread, list your full computer specs., and then your Project specs. with complete detail of your Assets. This article will give you tips on the info that would be so useful: http://forums.adobe.com/message/4515849#4515849
Most users do not experience crashes, though too many do. The normal causes, and in this order are:
System
Assets
Project settings
Also, be sure to list any error messages, that you receive with the crashes and hangs. This article goes into more detail, but it is more oriented to PC's, so only some will apply to a Mac: http://forums.adobe.com/thread/792580?tstart=0
Good luck, and hope that we can help with that "rogue" Orphan here, and then the crashing in your new thread.
Hunt -
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you! -
Exporting a Video from final cut express and uploading to vimeo
I film with a Sony FX-7 in 1080HDV and would like to know the specific settings of how I should export my video from Final Cut Express to vimeo to be played in HD mode on a vimeo account.
I looked that link up but my video seems to be running pretty slow, here's the link to the vid http://vimeo.com/20580561
Do u have any advice on what I should change for the settings?
Maybe you are looking for
-
When we extends class then what comes default
class base void one()throws IOException class derived extends base void one() when derived class override the function of one of base class then why it not give errror ?
-
BI Publisher (Obiee 11g) Scheduled jobs start randomly after services restarting
Hi everybody, I've a problem with scheduled jobs on BI Publisher that start randomly after server restarting. For example if there's a job scheduled every day at 8.00 am it works fine until the server is not restarted but when I restart it next job r
-
I am using Safari 5.0.1. I go to: http://www.google.com/ and type in my search. I get a list of hits and my search query (keywords used in the search) shows up in the box - all normal. The problem is that if I hit on one of the links and then hit the
-
Export Dashboard Report to Excel
OUr users want to be able to export some of the dashboard reports to excel. Is this possible? I only see Printer Friendly
-
in my ICLOUD email acct in FROM a name appears before my iCloud email address . How can I DELETE or CHANGE this Name?