Exporting ANYTHING (h264) in Q.7 errors...

Ok, using Quicktime7 Pro for windows. Everytime I open a file in quicktime and go to export to H264 my PC errors.
Every single time.
Whatever movie is opened in Q7 can play fine; avi, mpeg, soreson3 vid, anything. But as soon as I go to export, it starts and will get between 10-30% done and then errors.
I tried using SorensonSqueeze and AfterEffects, but both of those programs also error everytime I try to use the H264 codec. I've also reinstalled Q7 3times now, so yea... I'm at a loss at how to export movies to H264. I can play 'em fine, H264 vids, but not make 'em.
Any help is appreciated.

Actually, the AAC is going to be more dependent on your I/O sub-system, than on your CPU. Please give us the details of your I/O, i.e. your HDD's, their size, speed, controller type and how you have the HDD's allocated.
Also, for AAC, I use Audacity to convert to PCM/WAV 48KHz 16-bit. Even the pro audio-editing program, Audition, does not like AAC files.
Highly-compressed Audio formats/CODEC's are often highly problematic, and most users find that converting to PCM/WAV is by far, the best way to go. The quality loss will NOT be regained, but the ease of editing will be greatly improved.
Good luck,
Hunt

Similar Messages

System Copy - ABAP export using R/3 load -- RSCP ERROR: Altername NameTab

Hi all,
I am trying to export BW3.5 system using sapinst (R/3 load method). In the phase of executing export jobs , I am getting the error in SAPSSEXC.log by mentioning it as altername too old.
The log files are below.
RSCP ERROR: Altername NameTab too old
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: START OF LOG: 20090209061745
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#22 $ SAP
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Feb 19 2008 23:17:57
E:\usr\sap\BWA\SYS\exe\run/R3load.exe -datacodepage 1100 -e C:\Program Files\sapinst_instdir\NW04\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\NW04\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(GSI) INFO: dbname   = "hsotname                                                                                "
(GSI) INFO: vname    = "MSSQL                           "
(GSI) INFO: hostname = "hostname                                                  "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "hostname"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 16 (Mod 2 Step 3)"
(GSI) INFO: instno   = "0020239136"
(NT) Error: DOKCLU: normal NameTab from 20041108162211 younger than alternate NameTab from 20010201171049!
(SYSLOG) INFO: k CQF : DOKCLU&20010201171049&20041108162211&                rscpgdio 47
(RSCP) ERROR: -
3-
(RSCP) ERROR: code:   64 RSCPECALL
(RSCP) ERROR: Altername NameTab too old
(RSCP) ERROR: module: rscpgdio location:   47 line: 2964
(RSCP) ERROR: TSL01: CQF p3: DOKCLU&20010201171049&20041108162211&
(RSCP) ERROR: -
myCluster (55.18.Exp): 897: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.18.Exp): 898: suspicious create timestamp of alternate nametab encountered.
myCluster (55.18.Exp): 902: create timestamps of nametab: 20041108162211; alternate nametab: 20010201171049.
myCluster (55.18.Exp): 294: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: END OF LOG: 20090209061749
Then I have followed the note and i have modified the environment variable with the value
I18N_IGNORE_ABAP_FEATURE = 20080303_N1148541
Kindly advice me on the same.Please give all your suggestions to ovecome from this error.
System Environments
SAP : BW 3.5
Database: MSSql 2005
OS: 64 Bit Ms Windows 2003 server
Regards
Vijay

Dear,
Please check your Database is connected or not ,this is very critical error in the database.
please go through the SAP notes 738858 and 978244.
Warm Regards.
Mohammed Hassan Naveed

Could not complete the export command because of an application error

Every once in awhile I get the error, "Could not complete the export command because of an application error" when using the Save for Web option. It's really confusing because the error is not consistent. I don't get it all the time. In fact, 99% of the time I can save with no problems. When I quit Photoshop and reopen my files they seem to save just fine. Does anyone know why this happens, and how to prevent it from happening in the future?
Here are my specs:
Macintosh: iMac
OS: 10.6.8
Photoshop: CS3 (v10.0.1)
Any help is greatly appreciated!

No idea about the specific issue, but I like to pass on some general advice I have received myself here over time:
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

Hello! help me, please! while exporting video i faced an Unknown error compiling movie

while exporting video i faced an Unknown error compiling movie. the problen somewhere in the biginning of the video. the sistem automatically chooses user's type of export and cuts the beginning(

Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

How to do frame-by-frame editing in iMovie 08 and export in H264?

I wish to edit some videos and then export them in H264 so I can use them on a website.
I have tried to edit with iMovie 08 but can only edit second-by-second. I want to edit frame-by-frame ie to the millisecond. And it appears that iMovie 08 does not export in H264.
I have looked at iMovie 11 which has a Precision Editor which would work to edit as I want but for that I would have to upgrade from Leopard to Snow Leopard which I don't want. It would export H264.
I also have QuickTime Player 7 Pro but that too seems to edit only by the second not by the frame; it does however seem to produce H264
How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
Thanks for any ideas

iMovie exports in h.264 by default. All the presets are h.264 (except Tiny).
If you need to adjust the h.264 in some way, then SHARE.EXPORT USING QUICKTIME.
To edit to the nearest frame, Go to iMovie/Preferences and select Display Time Codes.

How to edit videos frame-by-frame and export in H264?

I wish to edit some videos and then export them in H264 so I can use them on a website.
I have tried to edit with iMovie 08 but can only edit second-by-second. I want to edit frame-by-frame ie to the millisecond. And it appears that iMovie 08 does not export in H264.
I have looked at iMovie 11 which has a Precision Editor which would work to edit as I want but for that I would have to upgrade from Leopard to Snow Leopard which I don't want. It would export H264.
I also have QuickTime Player 7 Pro but that too seems to edit only by the second not by the frame; it does however seem to produce H264
How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
Thanks for any ideas

I want to edit frame-by-frame ie to the millisecond.
Am a bit confused by what you say. iMovie and QT 7 Pro are both "frame" level editors. However, some forms of editing are, by their very nature, applied over a range of frames which may be a part of your problem. In addition, since "normal" movies have frames which are spaced apart in the 16 to 42 ms range, your requirement to be able to edit to the nearest millisecond would seem unreasonable and would probably be unsupported for playback purposes without skipping 90+ percent of the frames on most platforms.
And it appears that iMovie 08 does not export in H264.
All of the "Share" and/or "Export" options (except Final Cut XML...) either default to H.264 or allow export to H.264 (or X264 if installed) video compression.
How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
Difficult to say since you have not given any indication as to what you mean by "editing" here. You could, for instance, edit normal movie clips in a normal manner and then use an application like the JES Deinterlacer to change the playback time reference to achieve an effective 1 millisecond/frame playback rate you seem to want to target even though your platform cannot play every frame during playback.

Trying to export my forms results to excel error message is adobe can not save as the file is open

trying to export my forms results to excel, error message is adobe cn not save as the file is open in another location, however, no other file is open.

Thanks for continuing the help, but it is a medical realted form and I will just keep it confidential at this time.
Larry Lakes, Executive Director
The HANDLE Institute
[email protected]
541-639-1588
P. O. Box 6264
Bend, OR 97708

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

Hi pgrillo,
I'm sorry that you're disappointed with your ExportPDF subscription. I checked your account, and see that the order is still processing. As such, I'm unable to cancel it for you myself. However, a Customer Care agent can take care of your cancelation/refund quickly. Here is the contact information: Contact Customer Care. Click Still Need Help? Contact Us at the bottom of the page to find both phone and chat support options.
Best,
Sara

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
Please some one help on this

You need to try exporting the first half of the book.
If that exports ok then export the other half of the book.
Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
For example if your book is 128 pages long:
1. Export pages 1 - 63
2. If these Fail to Export then
3. try exporting1-32
4. If these Fail to Export
5. then try exporting1-16
If it doesn't fail (step 2)
Then export pages 64-128
and 64-90 etc.
until you find the pages causing the issues.

I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either.

I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either. I am a newbie at this and don't know what I'm doing wrong or if I can even use an external drive for my photos and catalogs (I did enable smart previews so I do know how to do that part). Help!

You can use an external drive with LR but I recommend only using it for
image file storage while keeping your catalog on your internal HD for
performance. If you moved files outside of LR (Finder or Explorer) you will
have to clue LR in on where they are now. Use the left-hand folder panel in
Library mode to navigate to the location on your external drive and use the
find photo option get LR to reconnect them. If you moved the catalog and
now LR can't find it you should get a window allowing you to select a new
one where you can navigate to the new location and select it. You can also
just start LR by clicking on the Lightroom 5 catalog.lrcat file to open it
and start LR.

CS4 InDesign "Export" anything but: can't export to anything but PDF

After two uninstallation/reinstallations of the whole frickin' CS4 Master Collection, and deleting the Defaults file repeatedly, InDesign still refuse to Export anything other than the first format that displays (usually, PDF -- although once I got it to display XML).
Go to Export, select INX as type, file name shows as *.pdf - swipe off PDF, even insert ".INX", click Save and the "Export Adobe PDF" dialog displays. It's not only driving me nuts, but I have a printer who is on CS3 and I have a brochure that needs to be printed, now...
Bless anyone who has a clue or idea or registry hack...
Later: Export works fine from my laptop. The only difference is that, yes, I got suckered into downloading the final-that-wasn't, but had left CS3 installed. Re-downloaded and installed the final-that-is, uninstalled CS3, re-installed the final-that-is, then went on to a couple of more reinstallations (on my workstation). For the laptop, I'd initially uninstalled CS3, then went through the final-that-wasn't and final-that-is dance.
I suspect there is a registry key somewhere that I can't locate...

>Note to Peter: the first download release of the Master Collection had a beta version of Photoshop. Uninstalling the whole thing was the only way to fix it.
Ouch. And that probably explains what happened to the OP. A corollary to my above post is that people who download the first release version (or install from the disks before the first service release) are only slightly less at risk for problems than beta testers. When we work on the cutting edge, occasionally we shed a little blood. :)
Peter

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Help me! "Could not complete the export command because of an application error"

Please, help me!
I've got the mistake "
"Could not complete the export command because of an application error" when I save for web in PS3 in win
thks so much,

You need to provide much more info about your system or else this is pointless.
Mylenium

I'm having this message when I try to export my video from Premiere Pro: "Error compiling movie. Unknown error"

I'm having this message when i try to export my video from Premiere Pro:
"Error compiling movie. Unknown error" Do anybody knows what to do?

1st, I moved your message to the correct forum
2nd, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
3rd, Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

Exporting ANYTHING (h264) in Q.7 errors...

Similar Messages

Maybe you are looking for