Exporting as an .FLV movie ??? Works from native QT but NOT FCP QT options

I have Flash 8 + the video encoder and FCP 5.1.4 on my Mac.
When using Quicktime independently I can export as an FLV. However when exporting from FCP (using Quicktime) there's no option...
Can anyone help, I know this is possible because we have the same set up at work.
Cheers. Mark.

Yep, that's what I mean when I say I've tried from Quicktime...
No option at all

Similar Messages

  • FCP Quicktime Movies works well in iDVD, but not in DVDSP

    Hello,
    I work in a film school with several iMac & PowerMac editing suites running Final Cut Studio 2.
    Every computer is set up exactly the same way, yet we are having odd problems with DVDSP on one of the PowerMacs.
    From FCP6, we export self contained quicktime movies, that we then Compress, and then import into DVDSP. This system works well on all of our new iMacs, but on the 3 year old PowerMac, the resultant DVDs that it burns do NOT playback on any DVD Players at all.
    Yet strangely, when I take the same QT Movie into iDVD on that computer, it burns a perfectly good DVD.
    I have even tried bringing the QT Movie files and Compressor files from the Power Mac and transfer them onto an iMac and have been able to burn them fine that way as well. This is occurring with all the FCP projects on this computer.
    Any help would be much appreciated,
    Sincerely,
    Marc Griffin

    It could be a few things, but it may be that the drive itself is dirty or going. It sounds strange but there were people on the board who ran into issues where they could burn the DVD but not play it back on the same drive. Could be something became corrupted. Also people have noticed some strange things happening if an install of Studio 2 was done over a prior installation - it seemed to be most reliable by doing a fresh OS install then installing 2. Also does the computer have all the updates to the software? Are all the computers running the same OS? Have you deleted prefs and repaired permissions?
    Also check your settings on the PowerMac, are you doing a proper build/burn? Did you set a first play? Are you using the same type of media?

  • Why would a rented movie work on the ground but not in the air?

    This is the craziest thing.  I rented a movie from my MacBook Pro and then transferred it to my iPad 2 for a flight.  However once I got on the plane each time I tried to open it I received a message that the movie could not be opened.  OK.  I figured I made a mistake in the transfer.  Once I got home I tried to open the movie again (in Airplane mode, just to be sure) and it loaded right up.  I didn't press play since I was leaving on another flight in two days.  Got on the flight and had the exact same problem.  Once I landed I tried it again and it loaded right up, but I didn't hit play because I have another flight on Friday.  What are the odds it will occur three times in a row?  I have 20 days left on the rental and about six more flights.  This could be fun.
    To lend a little irony to the situation the movie is "Up In The Air".  Anyone have any clue what the heck is going on?  The only variable among the two instances is that in the air I had headphones plugged in, but on the ground I didn't.

    Hi Dominique:
    First-if your mac can control the camera but not see the video,
    *Open Garageband
    *Play a note or two
    *Close Garageband
    *Open iMovie
    The camera will work now-REALLY!!
    If not, look here:
    http://docs.info.apple.com/article.html?artnum=43000
    Sue

  • .mov works on my website but not on iPhone or iPod ?

    I exported a .mov file from iMovie, load on to my dreamweaver site. Loads great on the site, but on a iPhone or iPod touch no dice. I know it is something small but I have been coding all day and at a loss...
    Someone please shed some light!
    Thanks

    but on a iPhone or iPod touch no dice.
    You're right, it's something small. In iMovie, open the Share menu and choose "iPod".

  • Illustrator extention export PDF file as PSD worked on Windows XP but not on Windows 7

    We have a extension that convert files to CMYK PSD with color profile attached. It worked fine (for most of files) on Windows XP but not on Windows 7.
      var expOpt: ExportOptionsPhotoshop = new ExportOptionsPhotoshop();
      expOpt.resolution = 300;
      expOpt.imageColorSpace = ImageColorSpace.CMYK;
      expOpt.embedICCProfile = true;
      doc.exportFile( psdFile, ExportType.PHOTOSHOP, expOpt );
    above code never throw any exception on Windows7, but just no file been saved. It only happened to convert PDF to PSD.
    If I manually open file in Illustrator (win7) and export it as PSD, I got ‘not enough memory’ error.  I googled a solution make the manual exporting worked but still the extension didn’t work.
    The solution for manual operation is set ‘additional plug-in folder’ for preferences-> plug-ins& Scratch disks’.
    Any advice?
    Thanks!
    Ling

    I apologize for not having an answer. I just wanted to chime in and say that I am having the exact same issue. I have never had this before. It's happened ever since I had my hard drive replaced and Illustrator has been reinstalled, so I am assuming that it's a preference somewhere that I have missed?

  • Serious problem: Imovie is working from the event but not from the project

    Hi,
    Related to my other post, I have discovered that Imovie seems to be working fine in the event library, but not in the project library.
    If I use the spacebar or play buttons in the event part, it shows the film in the right top screen or even in full screen mode.
    But if I click on my project, nothing works anymore.
    Sjoerd

    Hi
    Try to make a new User/account. Log into this. Have a re-try.
    How does it work now ?
    If OK. Go back to Your first account, Take move out iMovie pref file to the desktop
    Re.start iMovie.
    Works OK ?
    iMovie pref file resides:
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
    While iMovie is NOT RUNNING - move this file out to desk-top.
    Now restart iMovie.
    Yours Bengt W

  • ARD works from inside network, but not from outside.

    I can connect me MB to my G5 no problem when on the network inside my home. But if I'm on another network (and supply the correct IP address) I get an "ARD Not Active" error.
    All seem to be well, both machine are up to date and this works locally.
    What's wrong?

    That I can't tell. I travel and all I can do is open ports at home. I have no control over the hotel's systems.
    This was up and working fine - now it just won't connect. Even for the same locations that used to work just fine.
    But perhaps this is something:
    I recently installed Parallels Desktop. Now in the Network pref Pane, there are "Parallels Guest-Host" and "Parallels NAT".
    That's new, could it be a clue?

  • FLV Will Work on Local Host But Not on Web

    Hello,
    I'm having trouble embedding a progressive download FLV into
    my html page using Dreamweaver 8. The code appears correct but
    there is nothing where the video should appear.
    This tested fine locally. Everything loaded fine. But when I
    published everything via FTP there the space where the FLV should
    be is blank.
    The page I am working with is :
    http://drewbuchanan.com/start.html
    The FLV file is located here:
    http://drewbuchanan.com/Promo.flv
    The FLV Progressive SWF is located here:
    http://drewbuchanan.com/FLVPlayer_Progressive.swf
    And the skin files are located here:
    http://drewbuchanan.com/Corona_Skin_2.swf
    Here is the .FLA file also:
    http://drewbuchanan.com/VisualsPromo.fla
    I have posted the code of just the Flash Video as it is in my
    site below.
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0','widt h','700','height','420','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=Corona_Skin_2&streamName=Promo&autoPlay=true&autoRewind=false',' quality','high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http://w ww.macromedia.com/go/getflashplayer','movie','FLVPlayer_Progressive'
    ); //end AC code
    </script><noscript><object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
    width="700" height="420" id="FLVPlayer">
    <param name="movie" value="FLVPlayer_Progressive.swf"
    />
    <param name="salign" value="lt" />
    <param name="quality" value="high" />
    <param name="scale" value="noscale" />
    <param name="FlashVars"
    value="&MM_ComponentVersion=1&skinName=Corona_Skin_2&streamName=Promo&autoPlay=true&autoR ewind=false"
    />
    <embed src="FLVPlayer_Progressive.swf"
    flashvars="&MM_ComponentVersion=1&skinName=Corona_Skin_2&streamName=Promo&autoPlay=true&a utoRewind=false"
    quality="high" scale="noscale" width="700" height="420"
    name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
    pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    />
    </object></noscript>
    Can anyone help me out and tell me why this isn't working
    properly? Is it a server problem, user error?
    Thanks!

    Especially me!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "TC2112" <[email protected]> wrote in message
    news:[email protected]...
    >> You might want to set the video to Paused at start.
    Some people may
    >> not appreciate your music blaring out of their
    speakers during
    >> office hours :)
    >
    > ..or if their 2 year old is sleeping in the next room.
    >
    > For what it's worth, some people will click away from a
    site within a few
    > seconds of music automatically playing.
    >
    > Take care,
    > Tim
    >
    >
    > "Mark A. Boyd" <[email protected]>
    wrote in message
    >
    news:[email protected]...
    >> gatrfan posted in macromedia.dreamweaver
    >>
    >>> Hello,
    >>>
    >>> I'm having trouble embedding a progressive
    download FLV into my
    >>> html page
    >>> using Dreamweaver 8. The code appears correct
    but there is nothing
    >>> where the video should appear.
    >>> This tested fine locally. Everything loaded
    fine. But when I
    >>> published
    >>> everything via FTP there the space where the FLV
    should be is
    >>> blank.
    >>>
    >>>
    >>> The page I am working with is :
    >>>
    http://drewbuchanan.com/start.html
    >>
    >> The page works fine with JavaScript disabled. With
    JS enabled, no
    >> video. With LiveHTTP headers, I see that you
    apparently forgot to
    >> upload the Scripts folder and its contents,
    AC_RunActiveContent.js
    >> which contains the AC_FL_RunContent() function.
    >>
    >>
    >>
    http://drewbuchanan.com/Scripts/AC_RunActiveContent.js
    >> GET /Scripts/AC_RunActiveContent.js HTTP/1.1
    >> HTTP/1.x 404 Not Found
    >>
    >>
    >> Once you upload that folder and
    AC_RunActiveContent.js, JavaScript
    >> enabled browsers should show the video.
    >>
    >> [Side note]
    >> You might want to set the video to Paused at start.
    Some people may
    >> not appreciate your music blaring out of their
    speakers during
    >> office hours :)
    >>
    >>
    >> --
    >> Mark "404" Boyd
    >> Keep-On-Learnin' :)
    >
    >

  • Hi All, I have an Issue with iMessages working from iphone 4s but not from macbook air

    Hi everyone, I'm new to MAC's but have had an iphone for a while, so much so I had an iphone 4 but got an iphone 4s, I gave my 4 to my dad, and after recantly buying a MBA tried to imessage the old man but his name turns red and will not allow me to  send a message, I can however imessage him from my phone, I have the same issue with two other friends, but I know Imessage works on my MBA as I have two other people it works with (On the side the group Imessage is so cool) we did have an issue with facetime not recognising him untill he switched it off and on from system prefrance on his iphone, not sure if this is related or if this is a MBA issue or iphone issue, but could do with some help as I'm an Apple convert and I'm now hoping to convert the old man who loves microsoft, I told him how 'Apple just work' and at the moment have egg on my face
    Please help all surgestions greatlly reacived

    When sending a message from Mountain Lion's Message program, you should be careful about the recipient's address.  When you send a message to your dad, you should send it to his iPhone's phone number.
    Also, on your Mac's Messages > Preferences > Accounts, you should be logged in under your Apple ID (which is hopefully different from your dad's).
    Enjoy your Apple gear!  Indeed, it does "just work".

  • Inserted .swf movie works fine on PC, but not on website.

    Greetings!
    Using Captivate 4, I created a New User Training module that demonstrated a program within certain slides of the module as a .swf animation.  The .swf animation was another, smaller Captivate4-created simulation, published as a Flash 8 file.  When I preview, and after publication, the simulation movie displays and plays as designed.  However, when the file is uploaded to its destination website, the simulation movie does not display at all.
    What can I do to get these simulation demos to work?  The overall CBT module won't be effective without them.
    Thanks!
    Paul
    And while I'm asking, what image content type is allowed in these forums?  I get this message when I try to upload a 200x116 jpeg to illustrate my challenge.  I continue to get: [The content type of this image is not allowed.]

    Hi Paul,
    I think your problem is the same as described in this thread: http://forums.adobe.com/thread/515052?tstart=0
    If you have Flash then try and create a Flash loader as described in the above thread. If not then try and disable the Auto Play feature on the small embedded Captivate 4 file and see if it will work for you then.
    /Michael
    Visit my Captivate blog with tips & tricks, tutorials and Widgets.

  • Movie works in Keynote setup but not during presentation

    Hi,
    I have a movie clip on the last slide of my presentation that will only work on click in the setup portion of Keynote (where I create builds, etc). But will not even work on click in the actual presentation mode (i would prefer that it starts automatically but will live with an on click start). It acts like it wants to start - you hear a split second of audio, then it stops...no motion.
    The file extension for the movie clip shows as MPEG - anyone know how I can get this to play properly on cue in the presentation.

    Wow, I had the same issue, a h.246 video that simply would work in my presentation (it's 185MB) and clicking that option within the "Keynote Preferences > Slideshow > [check] Allow Expose, Dashboard and others to use screen" worked! I unlicked it, and it broke again.
    Clearly a bug.
    Thanks for the tip!

  • I can get FaceTime to work from my iPad, but not my iMac. It just won't complete calls. What suggestions do you have?

    My iMac no longer will get FaceTime to connect with others. Howecer, my FaceTime on my iPad works perfectly. Ideas?

    My iMac no longer will get FaceTime to connect with others. Howecer, my FaceTime on my iPad works perfectly. Ideas?

  • Processbuilder works from command line but not on deployment server

    I need to deploy my code on a 10g oc4j Oracle server. When I ssh into the server and run the following code, it works:
    import java.util.*;
    import java.io.*;
    public class Launcher {
    public static void main(String args[]) throws IOException {
    String url = "http://www.ebay.com";
    String[] commands = {"/bin/sh", "-c", "/opt/sfw/bin/firefox ", url, "-width", "1600", "-height", "1200", ":5"};
    ProcessBuilder pb = new ProcessBuilder(commands);
    env.put( "DISPLAY", ":5" );
    Process process = pb.start();
    It launches firefox and I can see the process running when I use "ps -ef | grep firefox". Firefox runs in a virtual frame buffer since this is a headless server. Originally I had problems just getting this code working by itself, but now it works fine.
    However when I deploy the exact same code via Oracle application server, it doesn't do anything. Not only do no processes show up but I have added different output statements into this code and have verified that firefox never launches. However no error is ever thrown either, even when I just test for generic Exceptions. So any ideas on what I can do to get this running?

    Caffeine0001 wrote:
    sabre150 wrote:
    Solerous wrote:
    Also, I do handle the stdIn and stdOut in the code. I was trying to pair down the code in my inclusion of it here to just give the bear minimum for running it. Here is my code for handling it if you'd like to see it:
    InputStream is = process.getInputStream();
         InputStreamReader isr = new InputStreamReader(is);
         BufferedReader br = new BufferedReader(isr);
         String line;
         System.out.printf("Output of running %s is:",
         Arrays.toString(commands));
         while ((line = br.readLine()) != null) {
         System.out.println(line);
         }I don't see stderr being handled and your command array is still wrong.
    Edited by: sabre150 on Dec 10, 2008 4:48 PM
    If he were to call [ProcessBuilder.redirectErrorStream(true)|http://java.sun.com/j2se/1.5.0/docs/api/java/lang/ProcessBuilder.html#redirectErrorStream(boolean)] then all he has to handle is stdout.
    True, then that would be just one more important thing that the OP failed to post in his "*exact* same code" .

  • Yosemite/iOS 8 - Airplay audio working from iPhone 6 but not from macbook

    I have a 2012 macbook pro that I've just upgraded to Yosemite and a new iPhone 6. My airplay setup is a Pioneer VSX-1121 receiver that has built-in airplay. My iPhone can connect via airplay to the receiver and it works perfectly to play all my audio. My laptop however, cannot. When I use option-click to click on the speaker icon in the bar I even see the icon for my receiver there - but when I click on it nothing happens.
    In the System Preferences I can't see it in the sound panel though...
    Here is the output of Console when I attempt to connect to the speakers:
    Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStartBrowsingForKey: '_airplay' Browsing service started
    Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStartBrowsingForKey: '_raop' Browsing service started
    Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStopBrowsingForKey: '_airplay' Browsing service stopped
    Oct 30 18:25:07 mbp.local discoveryd[50]: AwdlD2d AwdlD2dStopBrowsingForKey: '_raop' Browsing service stopped
    Oct 30 18:25:08 mbp.local SystemUIServer[696]: 2014-10-30 06:25:08.674530 PM [AirPlayAVSys] Picking route 'VSX-1121' (00:E0:36:D3:39:AF)
    Oct 30 18:25:08 mbp.local SystemUIServer[696]: 2014-10-30 06:25:08.675629 PM [AirPlayAVSys] Selecting endpoint 00:E0:36:D3:39:AF, item 1 for (audio only)
    Oct 30 18:25:08 mbp.local coreaudiod[698]: 2014-10-30 06:25:08.676725 PM [AirPlay] Selecting endpoint 00:E0:36:D3:39:AF "VSX-1121" for A/V
    I don't have any logs of a successful attempt so I'm not sure what that looks like in Yosemite..any help appreciated.
    For the record, I've tried a PRAM and SMC reset to no avail.

    THis "fix" maybe for the missing AirPlay icon in iTunes. But it wouldn't hurt to try it for this issue. I had the missing icon, did this and it worked. I also re enabled the IPv6 and it continued to work.
    1) open control panel.
    2)Choose Network and internet
    3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
    4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
    5) Click the properties button
    6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
    7) Click CLOSE
    8) Restart iTunes and try to use the Home Sharing feature again.
    KOT

  • Syncing movies (mp4) from iTunes to iPhones not working version 2.2

    Here is what I hope is the final answer to this incredibly prevalent problem, gleaned from a few PARTIAL answers, many USELESS answers, and some trial and error on my part.
    Problem:
    You are getting an error message when trying to sync MP4 movies to your iPhone using iTunes. (sorry I can't repeat the error message, I can't seem to restore the warning dialog that I turned off)
    Solution:
    Add the desired movie to the movies area of your iTunes application (you have already done this if you are receiving this error)
    From the list view, select (regular click to highlight) the desired movie.
    From the "Advanced" menu (NOT from right click as has been suggested many times), select "Create iPod or iPhone version"
    Now you will wait for a long time. A progress bar will show the conversion in process.
    When done, you will have two copies of the movies. One in the original location, and one in your iTunes movie folder. The newly created one will sync to your iPhone.
    To determine which is the new movie either
    1) Add "Date modified" to your list view by right clicking on the column headings in the movies list panel,
    - or -
    2) Right click on either of the lines and choose "Get Info" to view the name of the folder. Delete the one which is not the newly converted one. Hopefully this will only delete it from your movie list, not from your media. That's how it worked for me. If it asks if you want to move it to the recycle bin, you may have deleted the wrong one.
    After it is done, attach and select the iPhone device. Go to the video tab and scroll down to "movies". Check/uncheck the appropriate boxes for your movie(s) and hit "apply". Your movie(s) should now properly sync the phone.
    You do NOT need new software (for an MP4 movie)
    "Convert to iPhone" is NOT on the context menu
    Itunes will lock up for part of this process

    That didnt work, and there was no conversion bar. Ever since the new software update, my two iphones will not sync movies, and the older iphone will also not sync the music now. What is the point of having these?

Maybe you are looking for