Exporting as DT movie option

Curious, will exporting 1080i footage via the export as QT movie to 720p properly downrez the footage to 720p?

Appreciate the input. What would be the proper way of doing this, assuming I want the best quality. How would I go about it w/o discarding picture information. I am assuming you mean that the export option applies some compression to the footage?
thanks.

Similar Messages

HELP! : No "Export Audio To Movie" option

Hi
I've just finished a sync project and need to 'export' to movie. When I go to the file menu or right click on the movie track, the "Export Audio to Movie" function is not there.
PLEASE can anybody help. I have to deliver the pitch tonight. I'm running 9.1.3 64bit.
Many thanks
Jules

Mike is right. The reason why Logic9 doesn't have the Export Audio To Movie feature is the current state of Quicktime. Remember that the basic video capabilities of Logic are not written into the Logic code but outsourced to the Quicktime components in OSX (Don't invent the wheel twice). Based on a statement by Steve Jobs, the new Final Cut version should arrive in 2011 and you might think it will be 64bit, dragging QuickTime along with it, followed by a quick Logic update - maybe.
If this helps, here is my current workaround:
I work in 64bit with a separate project file for each music cue on a video based project. When I'm done, I bounce the audio.
Now I have also one master project, that also uses the current video and has the exact (important) sync settings. I use that project to import each previously bounced audio cue. If your sync settings are the same with all the individual projects and the master projects then you can import one or many audio files and with one command "Move to original recording position" all the audio files line up perfectly in sync.
_The advantages of that master project_:
1) You run that project in 32bit mode and therefore are able to use "Export audio to movie"
2) You can make rough mixes of your video (audio against dialog) for approvals or your own reference. Having these little videos with you at the dubbing stage can take prove very easy if the music editor messed up your cue.
3) You can export videos of individual cues, sections or the whole video (at least reels, if the movie is broken down in separate reels)
4) Easy handling/mixing of separate cues that overlap
5) Quick comparison of different versions of a cue which of course are all imported into the master project6)- Quick timing references for Cue Sheet preperation
7) In case of a picture edit, this the master project is also an amazing tool to figure out how messed up your music will be with the new picture cut. Im

"Export as Quicktime Movie" -- won't play on other computers

When I use the "Export as Quicktime Movie" option and try to play it back on a Mac without FCP installed, it is missing components and won't play back in Quicktime Player. Of course, I can export with various compressions and then it's fine, but sometimes I want that big "original" file. Any thoughts? Thanks!
Message was edited by: elisenew

You do need the codec you are exporting to installed in the other machine if you wish to play the exported file. A variety of codecs are available only with FCP installed.
A couple of possible solutions are a very high res H.264 or Download [ProRes decoder|http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac] to share a prores file between machines.

No .mov option in Export movie. Help, please!!

Hi there,
I am using flash professional, the newest version on Windows 8. I downloaded it a few days ago, and when I try to export the file as a movie there is no .mov option.
I have QuickTime downloaded, I've tried saying it as SWF and converting it but the conversion softwares don't work too well.
I downloaded QuickTime AFTER downloading Flash, should I reinstall flash?
Please please help!

are you clicking file>export>export video?

Help me! Audition always failing exports to wav, mov, and Premiere Pro! WHY???

Hello,
I am sound editing and mixing a picture locked 25 min short film. When done with the mix and ready to export the mixdown, the export always takes forever (the project is 12GB large total) I mixdown to stereo file wav, but when I open the file, both VLC and Media Player don't play, with WMP saying its corrupt. I bring the same file into Premiere, and it says that it cannot import "because of a header problem"! What is that? I tried the same with the export to Quicktime (mov) format, and I got the same result. Go up to the window and choose Export to Premiere (you know, directly into Premeire) and it says it it will take 12 hours. I don't remeber cs5.5 taking this long. HELP PLEASE, I need to export this by tonight!!!
Export settings(both formats):
Convvert to 48 khz
Convert to 24 bt (32 with mov; only option)
tried both RF64 and Legacy Chunk whatever
Premeire Pro freindly setting on in Preferences
Windows 7 64 Pro
INtel Core i7 930
16GB RAM
GeForce GTS 250

I don't think a file of that length should exceed 4GB, but be aware that Audition CAN export wave files larger than that due to the RF64 support (vs. 'legacy chunk'), and Premiere can't yet open RF64 giga-wave-files!
Now, other than telling you that this shouldn't be happening, we'll need more information before we can track down what's wrong. Best thing is to detail for us what your export settings are, precisely.

Export Audio to Movie - where is that function in Logic 9?

I have noticed that a very useful function in my Logic Pro 8 (version 8.0.2) options/movie/export audio to movie is not found in the Logic 9 version. One of my friends has this version (and an Intel Mac) but I cannot help him working with music and video - I cannot find it anywhere in the Logic 9 menus. Can you help?
Best, Peter Danstrup

I just opened a quicktime movie. Added an audio track, and am looking for the option indicated in the manual: "Choose File > Export Audio to Movie". Upstream it's indicated that this option only appears if a movie is present. My movie is present, but still this option does not appear?
Ideas?
-- Gerry

Exporting Audio to Movie, doesn;t export the audio

When I try Option>Movie>Export Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?

Indeed, thats what I do, but the time saving and
simiplicity of the 'Export audio to movie..."
function puts it at the top of the 'features that
really should work' for us composers to picture!
Hopefully it will be fixed soon with an update.
It's not broken. To be sure I went and tried it myself
and it worked fine. I did not even have to set the
locators, which I thought I would have to. I just dropped
the movie on a project and went to the menu. It did bring
up some dialog box I had not seen before. Something about
adding the tracks to use. It only showed track 1 but since I
could not figure out how to add the tracks I just hit OK and
it rendered all of them. Hope you get yours back up.

Export Slideshow as Movie Above 640x480?

In iPhoto '08, is it possible to export a Slideshow as a Movie with a size larger than 640x480. iPhoto '06 limits you to this 4:3 aspect ratio, and iPod resolution. I was hoping iPhoto '08 might allow you to at least export 16:9 movies at 640x360, or even let you go all the way up to 1280x720 HD resolution.

Ruben:
Yes you can. Select the Share->Send to iDVD menu option. When the transfer to iDVD is complete close iDVD without saving and go to your Movies folder. Your movie will be there and its size will be 720 x 540 in size.
Do you Twango?

Keynote does not export Qucktime embedded movies within slides? Won't play

I Have a Quicktime movie within one of my slides and when I export a Quicktime .mov file, that particular slide does not run the quicktime movie within it, just stays on the first frame?
any ideas where I am going wrong?
Message was edited by: thecount

I think this is a limitation of the export -> quicktime option
Keynote does all sorts of tricks to keep the file sizes small- and one thing really gets butchered are embedded quicktime movies- I have two almost show-stopper frustrations with this:
1- quicktime movies do not loop when exported to quicktime (limitation of sprite track? will look around in live stage pro)
2- all builds and movies must play in entirety before you can click through- this makes being able to skip around very cumbersome especially if using an indexed presentation

Placed SWF movie options

Using InDesign CS4, I've placed a SWF movie. In Object > Interactive > Movie Options, I chose to embed the movie in PDF, choose a JPG file as the poster, Mode: Play Once Then Stop, and turned on Show Controller During Play.
Exporting the InDesign document to PDF, choose the Smallest File Size preset, Compatibility: Acrobat 8, Include Interactive Elements, and Embed Multimedia.
The problems are that in the resulting PDF file:
the controller bar does NOT show
the movie loops repeatedly instead of playing only once
Can anyone help?

You could always use the Change Property behavior to swish
that layer
offscreen to the top left, e.g., change "top" to -10000 and
"left"
to -10000.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"lsb235" <[email protected]> wrote in
message
news:e3ebpf$qoq$[email protected]..
> Tricky question for you.....
> I've placed an swf movie in my main layout table and
when I change the
> visibility of my layers, it doesn't hide like everything
else does.
> Can it be done?
> It always appears infront of the upper most layer.
> Cheers
> Laini
>

Export a Flash Movie File

Can you Export Flash Movie files to other formats?? Don see
an Export to other File options.
Would like to Export a Flash Movie or SWF file to a Quicktime
or IPOD MPEG File.
Anyone know where to do this? Do not see an Export to File
option to that Format on Flash Pro CS.
Thanks

Without seeing your movie, its difficult to tell where the
problem may be. My first guess is that the data rate is to high.
You will probably need to choke that back in some way: lower the
data rate for the compressor, reduce the frame rate, reduce the
image size, reduce the color depth, etc.
When you select to export to QT, for example, a new window
opens to let you select some basic settings. At the lower right of
that window is a button titled "Quicktime Settings...". Click that
button and a new window will open that will allow you to set the
compressor, frame rate, quality, etc.

Export 16:9 .move file with FCP

Hello,
Since May this year I cannot export my FCP 16:9 project to a 16:9 .mov file anymore. The last good one I exported was May 4th, 2009. When I open this QuickTime file with FCP it is widescreen. I exported the same project on May 27th. That .mov file is letterboxed when opening it with FCP.
I never used QuickTime Pro because this program could and can only display my videos letterboxed.
I tried several options to try to export the movie 16:9 (Current Settings, DV PAL 48 kHz Anamorphic).
Someone advised me to use the Cmd-J option in Quicktime, but before May 27th, the export was good and I could use it in iDVD. But since that date it is not possible anymore. When importing the movie directly in iDVD, it is 4:3 format. And after changed it to 1024 with Cmd-J in QuickTime it is halfwidescreen in iDVD (looks like 14:9 i.s.o. 16:9)
How can I get my old good working version of FCP back I had on May, 4th and earlier ?
Or how can I export to QuickTime movie that gives me a 16:9 video again as it was before May 27th ?
Thanks,
Hubert

Hello,
I tried a new 16:9 project. In this new project FCP the video is exported in 16:9 format.
So there must be somewhere a 16:9/4:3 option switch in my old 16:9 project.
Where can this option be set to 16:9 ?
Thanks,
Hubert

Export To Quicktime Movie (Reference or Self Contained) - GENERAL ERROR

Hi -
I recently had to re-install FCS2 due to problems with OSX.
Now, for some reason, when I want to export from FCP to get a QT reference movie, I get a general error message. All other options from FCP export seem to work, but NOT export to Quicktime Movie.
Any suggestions?
Thanks.
Chris

how so?
we can all do with a dummy's cheat sheet e.g. when making a master monitor the record device, not the computer.
So come on, what'd you do?

Why the color mismatch when exported key to mov?

Keynote colors are rich and bright, but get all dull when exported to a mov.
Anyone know why this happens, or better yet have a solution?

Hi,
Thanks for your reply. No, I haven't converted any color images from RGB to CYMK. The original graphic file was made as RGB. The colored box in PM7 is set to the Color Options of:
Type: Spot
Model: RGB
(R 255, G 0, B 0)
As said, in PM7 the two red objects look identical in colour tinting etc on the screen, and you can't tell the difference. But when the doc is converted to PDF the difference is obvious.
After posting to this forum last night (Australian time), I wondered if it had something to do with dot resolution. The graphic file is 300 dpi, whereas the red PM box is filled with color that may be at a much lower DPI, causing a dullness in the color. I assume the PM 7 default for this can't be altered. Maybe there is a setting in Distiller that could handle this, so that the colors are equalised.
The solution I'm currently using is to remove the box (or oblong) containing PM's RGB Red, then make another graphic file which is RGB Red (either at 300 dpi or 200 dpi, either TIFF or JPG, it doesn't matter), of the same page size as the PM doc, then place it onto the page and send it to the back so that everything else sits on top of it. When converted to PDF you now can't tell the difference between the RGB Red in both graphics.
I'm happy with the result, but it's a workaround.
Thanks,
Roger3

How do I export a finished movie created in iLife 08 to a HD camcorder?

Does anyone know how to export a movie I finished in iLife 08 to my Canon HD camcorder? The last version of iMovie HD 06 had this option. I was able export a finished movie back to my HD camcorder and play it in real HD on my home theatre. I checked with Apple support and they could not help. I don't know why they took this feature away? I have tried exporting an 08 movie with the 06 version but it does not allow it? Why?

Welcome to discussions.
I do not have imovie 08, but here goes a guess.
Are you able to export it as a full quality Dv (QuickTime) movie?
If so, do that and then open that new QT movie in imovie 6.
Export to camera from there.
Sue

Exporting as DT movie option

Similar Messages

Maybe you are looking for