Exporting audio from Final Cut Pro

ok I have my film clip in a project in final cut pro, it is an interview, and I want to export the audio part allowing me to work with the audio in Logic 9
how do I export the audio please>

File>Share>Master File and in the window that opens select Settings.
Then in the Format section select Audio Only from the drop-down menu and also choose the audio format otherwise it will default to AAC.

Similar Messages

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

Can I mute all audio from Final Cut Pro X?

Can I mute all audio from Final Cut Pro X so that I can listen to music while I do sorting, keywording, favoriting, etc? I'm doing a video where all the camera audio won't be used anyways, so I don't need to hear it in FCPX.. I'd rather just listen to my music instead. Thanks.

For clips in the timeline, andynick's suggestion works fine - temporarily disable the audio roles will play everything without audio and you just have to reenable these roles later.
For clips in the Event Browser, you can also disable and reenable audio for a bunch of clips all at once. Select the all the clips you want, open the inspector, click the audio tab and uncheck the box (for "stereo" or "mono" or whatnot) under "Channel Configuration". Again, to reenable just check this box again.

Can't Export Video from Final Cut Pro

After updated to OS Maverick, I can no longer export video from Final Cut Pro.
It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
ANYONE CAN HELP??

10.0.2, I think this is where the problem is.
I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

Hi
I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
Here are the settings:
HD:
1 Video CODEC                 XDCAMHD50
2 Wrapper format           QuickTime Self-Contained
3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
4 GOP                                   Long GOP
                                             Closed GOP
5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
6 Movie version               UK Home Video Version
7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                          1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
2 Resolution                      1280 x 720
                                           1920 x 1080
3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
5 Chroma format              4:2:2
1 HD audio format           24 bits/sample 48 kHz sampling rate
2 Track layout                    Track 1 – 2.0 Stereo L mono
                                            Track 2 – 2.0 Stereo R mono
                                            Track 3 – L
                                            Track 4 – R
                                            Track 5 – C
                                            Track 6 - Low frequency effects LFE
                                            Track 7 – L Surround
                                            Track 8 – R Surround

First of all, what are your sequence settings? Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this). Do you have a surround sound mix?
You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs.
Do you understand about safe zones for graphics? If not, post back.
I don't see any option to set the GOP in xdcam in compressor. This may be built in to the xdcam format.
I don't see any option for 720 xdcam hd in compressor.
There are many other tools available for this kind of work, but they may be out of your price range. You might want to just find a facility with experience in deliverying this sort of thing.

HT5148 export video from final cut pro x

how can i export / share video from Final cut pro x (10.0.7)? i have try different type and even use compressor, but did not see any final product.
thanks

I went into File and then share and then choose the format that i want (master file - default) then i choose a second hard drive in my computer. and nothing happens at all

Exporting files from Final Cut Pro in Snow Leopard

I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
Thanks

Fix what?
Just choose the correct folder to which to export.

Export project from final cut pro to Avid

What are my options to create a workflow that implies doing my last trims on Avid (Adrenaline and Nitris?)
My idea is to create almost ended videos on Final cut Pro 5 by myself and expend a last day or two on an Avid Nitris to do the final touches, mixing audio and output the stuff...
the videos are industrial video and small budget commercials that requires more effects that Final Cut can offer me...
THANKS IN ADVANCE

First off, you'll need PRO EXPORT FCP>AVID from www.automaticduck.com.
Then you'll need to recapture all the footage used in the sequence into the Avid, since FCP and Avid capture media differently.
Shane

Audio from Final Cut Pro very very low

Hi guys I have not have a problem for awhile. A friend of mine recently move from DPS Velocity system to Final Cut Pro Studio 2 using a Intel Pro 3.2GHZ with all the bell and whistle, so I am giving him some training and tutorial. They have some footage in Velocity which I use MPEG StreamClip to convert to a DV file, I brought it in FCP (Three File one video and two audio makes one clip) it play in FCP Played ok when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play. There is other clip in the project, some capture in FCP and others imports in FCP Studio, DVD Studio Pro and QuickTime plays these audio ok. The audio from Velocity are Wave files, I taught anyfile that plays in FCP would play in QuickTime. Does anyone knows how to solve this problem please to help I would like my friend to change both system to Apple and FCP thanks.

Wellcome to the forums!
when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play.
I guess you encoded it to Dolby AC3 with Compressor, did you? Then you must chamge the standard Dolby preset as follows to keep the original FCP mix and level:
- Dialog normalization: -31
- Compression preset: none
And QT cannot play AC3 files.
Hope that helps !
Alberto

Export jpgs from final cut pro x

How do I now export jpgs from my final cut pro x?
They seemed to have changed it in the new version.

From the Share popup select Add Destinations. You see it in the Destinations preferences.

Export markers from Final Cut Pro X to DVD Studio Pro

Hello,
After finding out how to create chapters via markers in Final Cut Pro we wonder how to export these markers to DVD Studio Pro without having to create ourselves a .txt file and writing the names and the times of the markers in it to export it to DVD Studio Pro. Isn't there a way to make this happen automatically?
Unfortunately the new version of Final Cut Pro doesn't have an export to Quick Time Player and this is why this kind of solution falls out and we really need to create the markers first in Final Cut Pro and not directly in DVD Studio.
Is there a solution?
Thank you.

At present, you cannot add chapter markers in FCP X.
If you send the project to Compressor, you can add chapter markers there, or you can add them in DVD SP.
You can add the chapter markers in Compressor or DVD SP manually, or if you create a text file listing the exact timecode positions (from FCP X storyline) where you want the chapter markers to be (each on a new line) Compressor (or DVD SP) will automatically insert the markers when you point it to the text file.
Andy

Exporting sequence from Final Cut Pro 7, some clips are pixellated and bad quality, does this have anything to do with the fact that I changed those clips speed?

Hello,
Bit of a beginner using Final Cut Pro 7
Am currently trying to export a sequence using quicktime conversion. Sequence has various filters and effects over it and when I export it some of the clips are pixellated and appear to have not exported correctly. From what I can gather the affected clips have either been slowed down or made faster. I am wondering whether this is the reason they have not exported correctly
Any help would be appreciated
Cheers

More information needed.
Codec of material?
Sequence settings? (codec)
fwiw - do not use quicktime conversion. Use Export Quicktime with Current Settings enabled then do any format conversions in Compressor.
x

16:9 Export trick from Final Cut Pro to iDVD

If this is posted, I have not seen it. I have spent years trying to get a decent photo quality video on my widescreen tv without peoples faces looking like 4 pixel blocks. I think I have found a pretty decent result.
This is for Photo Slide shows only. (If you are going to mix widescreen video with photos, you must have the video in the timeline before you change the sequence to Anamorphic.)
Create my widescreen project in Final Cut Pro
(Photos have already been custom cropped (16x9) and reduced to 960 px in height before importing. iPhoto does this easily)
Sequence settings in FCP: Use the default settings just check anamorphic. Also, best compressor for photos seems to be DVCPRO.
When project is ready to export, Export to Quicktime Movie
Setting: Custom (the Sequence Editor pops up)
In the Aspect Ratio drop menu select "HDTV 720p (16:9) This will change the aspect ratio to 1280x720. All other settings should match your sequence settings.
Export
Open the movie in QT Pro. Select the Video Track in the Movie Properties
Check Preserve Aspect Ratio
Change the Height to 480 (the width should automatically change to 853)
Close the movie and save changes.
(This step really does make photos clearer)
iDVD will read this as widescreen and create descent non pixelated SD quality on your Widescreen TV.
If you have a better way to do this, or can get better quality than this achieves, I would be interested to know.
Profe

Hey Mish.
I use 960 px because it is double the minimum 480. That allows me to use zoom animation or crop further without losing quality. I guess I would not have to go as high as 960 but its a number easy to remember.
As for your questions about my methods. I am one of those Final Cut Users that really does not understand how things work. I am just good at using it to create my movies. So what you say is Greek to me. Also, for some reason, I do not have Compressor application that so many people talk about in the forums. I just got so fed up with the crappy result I got with just exporting with the same settings as the sequence. The result was pitiful. If you think of a better result using different sequence or export settings, I'll try it.
I do a Highlights DVD project once a year. It's about 2 hours long (photos and video) and this method has given me the best ever result. It's my last year doing it so I don't want to invest in any software. My buddy would also tell me to use DVDSP and I've used it a couple of times but there is so much to it that I always forget what to do. So I have to "play nice" with iDVD
Profe

I can't export video from final cut pro trial

I'm currently using final cut pro trial.
i have finished a project, and tried to export the video.
There's not "share" on tool bar, but there' one under "file" toolbar.
To share, i have to add destination, but I can't add any destination

The Share button is in your image. It's the last button in the toolbar and it appears active in your screen shot.

Exporting audio from Final Cut Pro

Similar Messages

Maybe you are looking for