Exporting Audio into Logic has altered the audio

Ok, what step am I missing? When exporting the audio From STP (Sound FX, Foley, ect) to Logic, for some reason when I play the audio in logic, it is no longer synced with the movie and the pitch sounds deeper.
Message was edited by: Spud Porter

hey thanks, yeah, i figured it out like right after I posted the topic. I was like "hmmm i wonder if the bit resolution and sample rate is it..."...and sure enough it was... But thanks anyways.

Similar Messages

Why does the letter P show up when i try to record audio into Logic Pro and no audio is audible ?!

Can anyone pleaes help as I have occured this problem today and sent hours trying to fix it and not had any luck !?!?
I always record in audio by press "R" on the channel strip but today for some odd reason the letter "P" shows up and no audio is audiable ?
Can anyone tell me what's going on ............!?!?
"When I try to record in some audio and press "R" it chnages to the letter "P" and no audio is coming through ?!?"

This is because you have Punch on the fly enabled under Options (top menu)>Audio>Punch on the Fly.... signified by the letter P instead of the letter R

Latency, Recording incoming Audio into Logic,... I don't understand

I'm trying to clear up my understanding (or misunderstanding) of latency of incoming audio into Logic.
As a test, here's what I did.
Set-Up
1. In Preferences/Audio/General, I set Plug-In delay Compensation to off.
2. In Preferences/Audio/Core I set the I/O Buffer Size to 32 (is this necessary?, to go that low?)
3. In Preferences/Audio/General I turn on the Low Latency Mode On, set Limit to 0ms (Zero Milliseconds)
4. Created a 1/4 note click track with Klopfgeist.
5. Just for reference, I converted to audio. Opened in the sample editor and it is indeed, exactly on the beat.
6. Set up my Roland Fantom as a Midi instrument. Channel 10 to trigger a Side Stick sound.
7. Create another 1/4 note click track.
8. Recorded the Rolands Output into my MOTU 2408 interface into Logic.
9 Opened up the waveform up in the sample editor, zoom in and notice it is obviously late.
10. Move the Anchor point 6 ticks to line it up,
Therefore, the incoming audio is off by 6 ticks.
Is it not possible to get 0 latency? I read the chapter in the manual but I believe this wasn't made clear, i could be wrong.
I have a guitarist coming over to record on my record in a week, I don't know how to deal with this except to move his entire track
by 6 ticks. ?

That is not really the type of latency that's affected by your audio I/O buffer setting. A DAW system has different types of latency, MIDI latency, latency caused by some plugins, AD/DA converter latency..etc. The six tics will probably remain the same or close to it if you're buffer is set to 64, 126, 256...etc.
Why do you have "Low Latency" mode selected, do you know what it's function is?
The I/O buffer setting affects two main aspects.
The response of the system when you play a virtual instrument, and...
...real-time monitoring of an audio input track. (this is an audio signal that passes through Logics audio engine and can use live effects)
The example using the Fantom requires MIDI sent to the keyboard and the audio into the MOTU passes through the AD converter.
What you want to set is the Record Delay so that your audio records in time, however... it needs to be set using a loopback test.
Use a 1/4 note recorded audio click (side stick) that you've adjusted to be perfectly on the beat copy it a few times. Use a cable from the MOTU's output to an open channel's input, record the click, compare.. now adjust the "Recording Delay" until the recorded click matches the first click.
Recording delay is on the Preferences/Audio tab.
pancenter-

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

Recording audio into logic?

hello,how can you record audio straight into logic express 7,i have an audio interface,just dont know how to control logic to do this.i know how to record it onto my hard drive,but just thought you might be able to record it into logic ,like you would recording midi, into a track etc..thats if you can do it at all ?
hope this makes sense.
thanx

When you record the track segment you are creating is saved on your hard drive. It is not data that is saved as part the song file itself. It is more like a link. Each segment is separate so you are going to create a new one each time you record a part of your song. Logic wants to place them into a common folder.
Logic needs to have a path to those files so it can access them for playback. It is best to have them in the song file folder rather than somewhere else on your hard drive. When you follow through with setting the audio path Logic will create the necessary folders for the different types of files it will need to access.
When you create a new song file it does not have that audio path. So, you either set up the link/path after you create a new song file, or when you try to record your first track segment, Logic will ask you to set that path before recording.
Hope that helps.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

My project has lost the audio track. I imported tracks from iTunes, they are in the project but do not play, please help?

Hi...my movie project has lost the audio track. I can see it but nothing plays.
The movie record has its audio but the imported iTunes track is silent.

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Error :- Another User has altered the quantity of Batch B01

Hello Experts,
I have created a addon through which in Sales Order while entering the quantity and pressing tab automatic Batch allocation
is done row wise for items . This process is working fine while entering .
But from last two days while adding the Sales order with batch allocated sap is throwing an error message that
"Another User has altered the quantity of Batch B01 in Warehouse SYD in row - 11"
This is not my addon error message .This error is thrown by SAP which has blocked the Sales Order Entry.
I am confused about what to do with this .Since this problem need to be resolve urgently .
Please help me regarding this.
thanks ,
Amit

Hi Jisha,
The problem which i was facing is not yet fully solved .
Since in SAP 8.8 the message is much more understandable as this is happening because another user has allocated the
batch quantity for the same item and the Batch is allocated for another user.
If you can try creating a Item - X of Quantity - 10 into two Batches A and B
A- 5 Qty
B - 5 Qty
Then if one User say "User - A'" opens the Sales Order Form and select the Item - X with Quantity - 5 and then select the Batch option system will automatically allocate the first Batch (A) for 5 Qty and the Order is not yet saved.
Same time if another user "User - B" opens a sales order and select the same Item - X with quantity - 5 and then select the
Batch Option system will automatically allocate the first Batch (A) for 5 Qty (But actually the first user has already allocated the
5 Qty for Batch - A ) . Then while adding the Order "User - A" order gets allocated with Item - X 5 Qty into the Batch table.
When the second user tries to add the order with Item -X allocated in also Batch - A system generates this message
" Another User modified the quantity of Batch A" since this batch is already allocated by user - A.
This was the cause for this message and still i have not found any solution for that.
Just told the clent to reallocate the batch for the items where this message is thrown .
Thanks & Regards,
Amit

Routing Quicktime synth audio into Logic

Does anybody know how to route the Quicktime synthesizer's built in GM sound module's audio output back into Logic so it can be included in a bounce down mix ?

Sure, first open Jackrouter from your application folder or drag it into your dock.
Hit the start button. Open Logic and chose Jack router as your device. Open the application you want to route into Logic (like Quicktime/iTunes whatever) and select Jack Router as Standard Input/Output in the Audio Midi setup of your Mac. Back in Jackrouter hit the routing button - menue opens. On the left there are the send port, so in my screenshot example I have chosen Kontakt 3 standalone to be routed into Logic but it could be Quick Time/itunes whatever. I selected Jack Router as the output device in Kontakt as well, now I click on K3 in the send port section and on the right I double click on Logic as the receive ports, the Logic letters turn red to indicate that a connection was made.
If you connect the Logic send ports to the system receive ports and activate software monitoring you will hear what you record into Logic through Jack Router. So I think this little app is very useful in many situations.

Recording audio into logic from a rewire application

Im using logic 8, but im about to have 9.Is there a way to record audio in from a rewire application, in my case Reason 4.Im able to run sound through it,and out of the main mix. But cant figure out how to record onto a track for later use and manipulation.Any help would be great. Thanks

In your mixer: options> new Aux. channel strip, set input to Reason channel (#,#). In Reason don't use the 14:2 mixer, but hook everything up to the hardware interface. If you do go through the 14:2 everything in Reason will be on one track in Logic (Mix L/R in the Reason input menu).
Then in Logic, either change the ouput of that channel, or set up a send, to a bus (say 1).
Then create an Audio track in the arrange window, and set the input to bus 1.
That gives you a track with the Reason part recorded as an audio file.

Can I import audio into a clip, replacing existing audio?

I want to import audio from footage I've shot and use it to replace existing audio in a movie. Can that be done?

According to HT4622 you can copy audio into GarageBand from an app that supports copying audio to the clipboard. Once in GarageBand it would possible to make edits such as trimming or removing/repeating segments. You could then "share" the resulting song via email.
What kind of recording are we talking about? GarageBand has a maximum song length of 32 minutes (320 bars at 40bpm) which may affect its suitability for your project.
tt2

IMORTED AUDIO/VIDEO FILE ONLY PLAYS THE AUDIO WITH A BLACK SCREEN

I'm trying to put a DVD together of my friends' concert, but every time I export from AVID to a QT file, import it, transcode it, and put it in a timeline, it only plays audio and a black screen.
I went back into AVID and made sure that I exported both audio and video...I did. Then I checked the QT file, and it plays the audio and video.
I exported the files as uncompressed. Should I use a compressor?
PLEASE HELP!!!
Thanks.

Encore CS3
Video
Compression: None
Depth: Millions of Colors +
Quality: Best
Audio
Format: Uncompressed
Sample Rate: 48kHz
Sample Size: 16
Channels: 2
Size:
720x486
Aspect Ratio:
16:9 square pixel (864x486)
Also,
I recently made another DVD with the same settings that turned out fine, so I'm not sure what the problem is with this one.
Thanks.

The audio dosnt show up on the audio visual thing.

the little audio bar that shows what the sound looks like dosnt show anything anymore. it just loads and loads. i have erased the app and reinstalled it and that didnt work. what is making it not show up?
please email me at [email protected] or wherever this tells you to email me.
thanks, matt

Hi eviecoffey,
Thanks for using Apple Support Communities. This article has additional steps you can try if your computer does not recognize your device:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari

I am running Logic Pro 9.1.7, and I use a Roland RD700GX keyboard to input midi data into Logic. How do I set up Logic to record the Roland's own internal Grand Piano sounds into Logic, while retaining the ability to make midi edits? By Eggie

I am running Logic Pro 9.1.7 on a mid-2011 Intel iMac running OS10.7.4. I use a Roland RD700GX as my midi input keyboard. How can I set up Logic to record The RD700GX's own internal Grand Piano sounds, while retaining the ability to take advantage of Logic 9's midi editing capabilities. I am a relative newcomer to Logic, and I haven't been able to find an answer in The Logic 9 User Manual. A step by step procedure would be much appreciated. Thank you.
Eggie0379

Create a new External Midi Track, set the MIDI port to the one being connected to teh RD700. Now,create a new Software Instrument track. Select the external instrument plug-in. Set the MIDI destination and the audio input inside the Plug-in. Now, you can record the MIDI notes and hear the sound of the RD700. Once you've editied, you can bounce the track.
Best,
DaCaptain

Quicktime audio recording...records the audio of QTmovie I am playing

I am triying to create a new audio recording (I am doing a translation). But I need to playback the quicktime movie I am trying to translate. (So, I will know what i am translating), but the new audio recording records the audio of the quicktime movie i am playing not my voice. ...help I am a rookie...XP

Hello, Brenden. Thanks for taking the time to look at my question.
What I mean is, whenever I plug my headphones into my computer, it's as if they're not there. I can still hear what I'm playing even though the headphones are plugged in.
I don't know if that clears up what you didn't understand about my question. I posted a video on Vimeo.com showing what my issue is. I hope watching it will make my question a bit less vague.
Here's the link to it:
https://vimeo.com/115614338
-"apple.asker"

Exporting Audio into Logic has altered the audio

Similar Messages

Maybe you are looking for