Exporting audio lossless
Hello,
what settings are prefered for exporting audio lossless in best quality using Quicktime 7.2? Linear PCM (16, 24 … bit) …?
You would export identical to the source file settings.
Higher values can't improve anything and only make a larger file size.
Similar Messages
-
Export audio for itunes other than aiff?
I'm exporting some audio, dv based and ultimately want it in itunes (v7) both as an apple lossless and as an aac. I can export from fcp using quicktime conversion to both apple lossless and aac, audio only, .movs. For some reason I cannot get itunes to open or play these files.
The only thing Itunes seems to like is if I export audio to aiff. Then itunes will play it (and of course I can convert it from there).
Two questions... How do I get itunes to recognize these files. They are in a format it shoud recognize, no?
If I can't, is there a quality loss by going up to aiff and then back down to apple lossless or aac?
thanksAIFF is lossless, so no quality loss by going out that way.
Patrick -
What is the difference between"export audio and "bounce"?
What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob -
Media Encoder/After Effects CC 2014 Only Export Audio
I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000 -
Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format
Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
AlexanderHere are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound. -
Export Audio to Movie - where is that function in Logic 9?
I have noticed that a very useful function in my Logic Pro 8 (version 8.0.2) options/movie/export audio to movie is not found in the Logic 9 version. One of my friends has this version (and an Intel Mac) but I cannot help him working with music and video - I cannot find it anywhere in the Logic 9 menus. Can you help?
Best, Peter DanstrupI just opened a quicktime movie. Added an audio track, and am looking for the option indicated in the manual: "Choose File > Export Audio to Movie". Upstream it's indicated that this option only appears if a movie is present. My movie is present, but still this option does not appear?
Ideas?
-- Gerry -
Export audio to video AAC not working in Logic Pro X
Hi
Anyone else have this.
When I choose to export audio to movie, and select AAC, it exports but when I chack the file, it has actally used PCM.
Regards
KeefDid you ever manage to get this figured out?
-
Exporting Audio to Movie, doesn;t export the audio
When I try Option>Movie>Export Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?
Indeed, thats what I do, but the time saving and
simiplicity of the 'Export audio to movie..."
function puts it at the top of the 'features that
really should work' for us composers to picture!
Hopefully it will be fixed soon with an update.
It's not broken. To be sure I went and tried it myself
and it worked fine. I did not even have to set the
locators, which I thought I would have to. I just dropped
the movie on a project and went to the menu. It did bring
up some dialog box I had not seen before. Something about
adding the tracks to use. It only showed track 1 but since I
could not figure out how to add the tracks I just hit OK and
it rendered all of them. Hope you get yours back up. -
Export Audio Option is Missing
I have a simple project set up - 3 video clips making up the movie, and 2 audio clip - as part of a training/testing.
I need to export the audio (they are mp3 format)
However, when I do File->Export->Audio, I have only the following choices:
Media
Adobe Clip Notes
Title (Greyed out)
Export Tape (greyed out)
Export to EDL
Export to OMF
I am guessing I have something configured incorrectly, but haven't been able to find out what. Any ideas?
Thanks
Kathy
CS4.2
Win7File->Export->Audio
Curious. I don't have that option. Though I am still using 4.1.0.
Have you tried the standard method of File>Export>Media... and calling up the correct settings there? -
Hello
so, background to the story. Now peak pro is defunkt on OSX I am trying to use Audition to create cdmasters. The idea being I will compile the album in audition, export wav files of each track including gaps and compile DDPi master in Sonoris DDP creator. Should be fine but quite a few limitations I've found already in audition.
1)Main question is this. Exporting tracks. I have compiled and added all the markers in to a 30+ track cd. I've exported whole thing to a single mixdown that includes marker but the 'EXPORT AUDIO OF SELECTED RANGE MARKERS TO SEPERATE FILES IS GREYED OUT' even if i select everything....
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
2) & 3) are very annoying when you only want to move one clip by a few frames or seconds.
Any ideas folks ? Like i say uestion 1 is most pressing!
Thanks in advancethanks guys, all makes sense, really appreciate it.
I will try the merging out. I was in a hurry to get a CDREF out so ended up just exporting the compiled album out as one wav from audition and adding PQ points in Sonoris. Not ideal especially as running order etc is bound to change.
I can't recomened Sonoris DDP creator enough, fantastic program and very reasnably priced. I have Soundblade LE as well but find it too clunky to bother learning, its one of the least intuitive audio programs I've ever come across.
Maybe Audition and Sonoris should team up, if you could add PQ points into audition it could become the best OSX option for compiling cd masters.
Did you have any thoughts on questions 2)&3)
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
Thanks
Dan -
does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? If so, is there a reason to export audio via optical jack then to an external DAC then to stereo?
My suggestion to work around this problem would be to hook up an Airport Express. The AE also has an optical out the same as your iMac. As long as your wireless connection is robust enough you should be able to stream from your iMac to your AE and then have the optical cable connect between your AE and your DAC, which then connects to your Integrated Amp/Receiver/Pre-Amp (depending on your system configuration).
I assume because you are using the optical out and connecting to an external DAC that you are looking for a high level of Audio quality ? -
Hey all, so I'm using Final Cut Pro 5.0.3, I can export video no problem, but when it comes to exporting audio, FCP will export the whole track (approx. 35 min.) but there will only be about 1 min of the audio at the begining, after that its 34 min of blank track. I'm trying to export to .aiff. Can anyone help me out?
Thanks. JCV
Dual 2GHz Powermac G5 Mac OS X (10.4.3) 2 GB RAMThe only thing i can think of is make sure you have no 'in' & 'out' points marked on the timeline... if you do, FCP will only export audio between those points...
clear markers with option(alt)+X -
Exporting audio files separately from video using a Mac
Using a Mac computer, can you export audio files separately from video in Adobe Premiere Elements 11? If so, how would I do that?
Thanks as always.I worked through the instructions in the Classroom in a Book for exporting
the video and the audio together and the audio separately, but I am not
quite sure of some of what to check in some of the categories. I would
appreciate some guidance. The purpose of sending this project is to have
my son clean up the sound.
highlighted MPEG
Presets: NTSC DVD Standard
File: Speaking Out for Healthcare for Everyone-51.prel
Save In: /Users/Barb/Desktop/New York State Single Payer/Healthcare
Stories/Videos
Advanced: clicked on
Preset: NTSC DVD Standard Or should it be widescreen
Audio Format Settings
Audio Format: Dolby Digital (Don't know what to check)
Basic Audio Settings
Codec: Dolby Digital
Audio Layer: Dolby Digital Stereo
Frequency: 48 kHz
Bitrate Settings:
Bitrate (kbps): Don't know what to check. It shows up as 192
Thanks. I don't know what I would do without this community.
barb -
Exporting audio and video together for Mpeg2 dvd
Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa
To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers -
FCPX XML not exporting audio with project...
FCPX XML not exporting audio with any project.
I have tried with several different projects to no avail.
Any thoughts or suggestions?
ThanksI used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.
Maybe you are looking for
-
i have installed oracle 9i AS (EE)on NT, Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives e
-
I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that
-
PI 7.11 JMS adapter using JNDI weblogic server issue
Hi SAP experts, I have a scenario to integrate to a application using JMS adapters. we use SAP PI 7.11 version. We have deployed JMS drivers successfully and We face issue here to connect to weblogic server We are using JMS adapter using JNDI to conn
-
Dear All, Our Netweaver EP developer is requesting for SAP_ALL to access sap ecc6 system. Are there any standard role from sap to support RFC call from Netweaver AS to SAP ECC6. in reality the requirement is only to make web based application for edi
-
Difference? Elements 12 and Premier Elements 12?
I downloaded both but only got and icon for Elements 12. Can't find Premier 12.