Exporting audio to video questions (easy starfish)

save me having to test this as i have little time:
7.1.1 audio is saved to relevant section of entire video?
7.2.1 audio is saved and new video made of just the section of video?
7.1.1 audio is added to existing audio on film? or replaced? or isn't this an option here?
7.2.1 audio is added but no option to replace?
thanks in advance.
rohan

too late - i had to sort it myself. you guys need to be quicker...

Similar Messages

Exporting audio and video together for Mpeg2 dvd

Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers

Problems with exporting audio music video to QuickTime

In iMovie I made this audio music video, combining music with photos and audiovisual clips. In iMovie I muted the original sounds of the photos and audiovisual clips. Yet after exporting the audio music video to QuickTime, parts of the original soundtrack can still be heard, some of it in the right place, some are scattered out at random. I have exported audio music videos from iMovie to QuickTime before - consisting of music and audiovisual clips - and then I had not theses issues. Can somebody explain to me what I can do to mute the original soundtrack in QuickTime? I don't want this original soundtrack to spoil the audio music video when I upload it to Youtube.
Thanks in advance

There is a bug in iMovie 09 that produces weird audio artifacts when you use speed changes (fast or slow motion) that do not conform to the preset tick marks of 25%, 50%, 100%, 200%, 400%, 800%, etc.
If you are using custom speed percentages like 58% or 139%, change them to one of the presets, and that will fix the sound.

Logic 8 Export Audio to Video using Pro Tools HD hardware

Hello everyone,
I am having problems with the "Export Audio to Video" Function in Logic 8. Logic will go through the export process just fine, but when I open the export elsewhere with logic closed there is no audio. The video plays fine. I have read that this function was broken in logic 7, and doesn't work with intel based macs. BUT, I am using logic 8 with a Power PC. One thing that might have an effect on this is we are not using the standard core audio driver. We are using our digidesign HD Hardware(Sync I/O, two 192 I/O's) for recording and playback. I set this in the audio prefs by choosing DAE as our audio driver. Im guessing this has something to do with the audio not bouncing out, or bouncing out to some weird unknown location and I cant find it. we have figured out a work around, but its time consuming and not so accurate. if anyone has any ideas please let me know!!!!!!
thanks.......

Well, I can't find it. I remember he said it was working fine under PT 7.3.1.
I assume it would work under Core Audio using the Digi hardware, just not the DAE or DTDM features. If you're new to Logic then the Core Audio will be enough to get you up and running.
Just from reading the manual the DTDM features don't seem to be any different than earlier versions. I was hoping for more surround support, but I guess I won't really know until I test it what is and is not possible. Currently I run ProTools on a MacPro and Logic on a G5 and link them with MTC, and I can always keep this approach if I find it's more flexible.

CS4 not exporting audio with video

For a while now I've been working on a video for my class, mish-mashing together a bunch of smaller .avi files into a cohesive whole. Everything inside of Premier works perfectly. I edited the audio tracks with Soundbooth, so now they are .wav. When I export the video, first I tried MPEG4 and messed around with a lot of settings. After this didn't work, I searched around and discovered that Premiere occasionally doesn't like it when you change the pre-set settings, so I switched to H.264 High Quality and exported with that. Same deal: the video works fine, no audio. And yes, I made sure to check the box that says "audio and video" and not just video.
In short: How do I get Premiere CS4 to export my audio and video when I tell it to?

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Quicktime 7 Pro: Demuxed MPEG-2 Won't Export Audio With Video

Hi,I'm trying to create .MP4 files from my camera's multiplexed MPEG-2 files. I have used MPEG Streamclip to split audio/video and save the resulting files in .MOV format. Then, after editing in QT 7 Pro, I want to export the separate audio and video in a single MP4, but have been unable - I can export either audio or video, but not both. The export options allow only selection of audio or video.
It seems like this should be a really simple issue, but I can't figure it out...

There is not a version "just" for Intel. There is one for QT6.3 and earlier and one for 6.4 and later and the latter one includes Intel macs. E.g. it also works on PPC macs with QT 6.4 or later.
I have that one on an Intel mac, didn't upgrade a thing from the files and programs transfer from a Powerbook G4 and it works fine.

Export audio to video AAC not working in Logic Pro X

Hi
Anyone else have this.
When I choose to export audio to movie, and select AAC, it exports but when I chack the file, it has actally used PCM.
Regards
Keef

Did you ever manage to get this figured out?

Exporting audio with video like it was recordedw

We have shot a ton of video with the dvx-100 and 100a. sometimes final cut captures it weird and i'll have a -03:37 or whatever sync problem. If there is an easier way tell me, i want to export the video after i sync it so I can reimport it and just cut it from there. Or is there another way to do this?

I already synced it,
Ah. Good for you.
now i want to export it to a format which can have two mono tracks instead of a mixed pair.
That's not really the issue. The issue is how your target app will handle the two tracks. Where are you going with the file? Usually you'd just pan both tracks to separate L and R. Then, even though theyare being mixed by your playback app, they're still separated.
One of the channels has a tram on it, which i need, the other is just room tone(camera mic) .
So you don't need both? Or you want to be able to mix them separately in the next app?
the audio was recorded with two mono channels, I need the same with the export.
Not easy to grasp what you want form this post, glad you made a second shot at trying to ask the question. but you still haven't offered up enough information yet.
bogiesan

Export audio to video problem

Hi,
I'm working on a video project. I have to change the soundtrack of a video, so I import the video to logic and also import its old soundtrack and delete it. Then, I export the new soundtrack I have composed to the video and it bounces.
However, when I listen to the new video the two soundtracks are there. I can see no way of deleting the old one. It had never happened to me before and I had performed this task several times. I wonder what the problem could be. Any help will be welcomed.
Thanks in advance for your help

Even though you have deleted the original from the arrangement, it's still part of the movie. So when you see this screen...
... that's the original audio - you have to click the background to deselect it.

Exporting Audio to Video In Logic Pro

After I go through the various windows starting from Option/Movie in order to export sound to the movie, when the final window comes up that requests which tracks to export, I am unable to get this to work.
How can I get the audio track into the actual video clip (about 20 seconds of duration)
Are there specific procedures beyond what the manual states?
G5 Dual 2G Mac OS X (10.4.4)

For monophonic audio you can now use Flex Pitch.

Audio and video question.

I have a standard audio button on page one of my folio but when i swipe down to a page that has a video it kills the audio.
It only kills the audio exactly when the video starts.
Thoughts?

Pretty much how it works. One or the other and one at a time.
Bob

Upon export, audio and video are out of sync.

While editing, my cuts are lined up with beats in the music, but after export they shift approximately 5 frames, making my cuts appear later.
The Sequence settings match the clip settings at 23.976 fps, and i've tried just about everything I can think of to fix the issue.
I've reverted back to previous Autosaves of the project, tried numerous export settings, separate and new projects, different machines, but nothing seems to work.
At this point I'll take any and all suggestions.

Please UN-check the "Frame Blending" box, that is only used when changing frame rates. The source and export are both 23.976, so that can only cause issues (blurring between frames with motion). Also uncheck "Max Render Quality", that is used for SCALING, such as 1080 to 720, or HD to SD. Your source and destination are both 1080p.
Rule of thumb - do NOT check boxes unless you really know what they do and the results they provide - the DEFAULT settings are there for a reason ;-)
Also, I never use "Match Source" - rather, figure out where the video is going (Blu-ray, web, device, etc.) and find an appropriate PRESET - there are tons of them under "H.264".
I'm assuming the video source is also 23.976? If source doesn't match sequence settings, that can be an issue with sync.
Try exporting entire sequence rather than In to Out. Try EXPORT rather than Queue.
Last thing, what is the source of the video footage? Some phones use "Variable Bitrate" recording and Premiere is not equipped to deal with that very well.
Thanks
Jeff Pulera
Safe Harbor Computers

Another video question,easy though,i promise...

Once i get the video on my i-pod,how do i delete it off of my i-pod?thanks...

You can just drag and drop your video files into itunes as you can music... don't forget it's easy to create video playlists while you're at it, just add them in the same way you do with your music files and then drop the video file into them... the ipod recognises the difference between a video and a music file and your new play list will automatically appear in under your "Video Playlist".
MB67

Audio and video out of sync after exporting sequence

I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
Video is 61 minutes and 27 sec long
Audio is 61 minutes and 38 sec long
That means exported video is shorter than original sequence.
What could that be ?

I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
Good luck!
Message was edited by: Anthony M Kassir MD

Strange export result in FCP 7- audio and video output not in sync anymore

I have a problem exporting edited videomaterial. After export audio and video they are not in sync anymore. There's a difference of 8 sec when exporting audio and video separatly. Movie is total 61 min long.
Video and sequence settings are HDV1080i50, 25fps, 48khz, 16 bit, mono.
What could that be ?

Well now that I look at all the clips in FCP more closely I see some clips from the same tape are in sync and others are out of sync. And one section of tape which I captured twice was in sync on one clip and out of sync on the other. So it can't be the tapes.
Maybe the sync problem is caused by not coordinating the tape playing and FCP capturing properly every time! So I will try re-capturing the problem sections of tape.

Exporting audio to video questions (easy starfish)

Similar Messages

Maybe you are looking for