Exporting custom setting and importing custom setting

Hi, I recently upgrade to another mac pro.
I have custom setting for the mpg2 whitin old mac computer for compressor.
How can I export the setting out from my old machine compressor and import it back into my new machine's compressor?

Great!
thanks,
I have newbie question for you.
I have animation for 720x480 with square pixel, progressive.
I can't figure out how to change the pixel ratio to square (or 1) for mpg2 custom setting, and change 29.98 to 30 frames per sec..
Do you know how?

Similar Messages

Error while Export from 10g and import to 11g

Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu

Jibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).

Is exporting from 8i and importing in 11gR2 is supported?

is exporting from 8i and importing in 11gR2 is supported?
the 8i is on win 2000 and the 11gr2 is on linux5
Thanks
Edited by: user9145417 on 07-Sep-2010 16:53

I experience same problem in Windows. Exp terminated without error. But I assume that's windows fault (isn't it always the case?). It works in Solaris though.
dwdb201:/d1/usr/oracle >exp file=/d1/usr/oracle/ssss.dmp owner=delayuser
Export: Release 9.2.0.7.0 - Production on Wed Sep 8 11:35:56 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/*****@QWDB203_WEB as sysdba
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P15 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user DELAYUSER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user DELAYUSER
About to export DELAYUSER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export DELAYUSER's tables via Conventional Path ...
. . exporting table ADDRESS 806571 rows exported
.

Export from 11g and import to 9i

I have run exp from machine runing oracle 9i to export tables from
another machine running oracle 11g .Export is working fine but while
importing in Oracle 9i it is giving the following errors.
import done in US7ASCII character set and AL16UTF16 NCHAR character
set
import server uses WE8ISO8859P1 character set (possible charset
conversion)
IMP-00003: ORACLE error 96 encountered
ORA-00096: invalid value for parameter plsql_compiler_flags, must be
from among NON_DEBUG, DEBUG, INTERPRETED, NATIVE
IMP-00000: Import terminated unsuccessfully
Can anybody suggest how to do this.
Thanks for your valuable time.

Duplicate post
export from 11g and import to 9i
Srini

Transfer palm data from PC to Mac without using the M100 - only exporting the data and importing?

I had an old Palm M100 that I haven't used in a while but I love the palm desktop app - my PC currently runs 4.1.4
I have a mac powerbook and I loaded 4.2.1
When I export my calendar and address book data in the .aba and .dba format from my PC - the Mac palm desktop app doesn't seem to recognize those file formats.
Are those not standard formats between the two platforms? It also looks like the Mac desktop app doesn't even recognize importing data from another Palm format? It just shows the other program formats.
Also, when importing as CSV or tab-delimeted those are extremely messed up also.
Any "easy" way to get the data off of my PC and onto my Mac without using the Palm M100 itself?
Thanks,
Dave
Post relates to: Palm m100

The suggestion is not accurate, at least with respect to calendar information. I'm in nearly the same situation, and just tried it. (Saving .dba file out of Windows Palm Desktop 4.1.0, importing into Mac Palm Desktop 4.2.1revD.)
First, the Mac program will not recognize the .dba as an importable format if one selects All Readable Documents.
Second, if one selects All Documents instead, you get the following error message:
The file could not be imported.
In order to import data from Windows Palm Desktop software, export the file in one of these formats: comma (.csv) or tab (.tab) delimited, vCard, or vCal.
The problem with this is that Windows Palm Desktop 4.1.0 offers only two options for exporting Date Book information:
1) the whole datebook as a .dba file.
2) individual calendar items as a vCal.
So far as I can see, there's no way to Select All so as to export all as a vCal, and no pre-set option to do so.
Post relates to: Palm m125
Post relates to: Palm m125

Is it possible to export user settings and import into same environment?

Hi guys,
I exported a user profile settings into a file and triedd to import saved file into same environment where I exported, but I am getting following error
"Login name already in use"
I followed the same process for restoring groups.Exported groups into a file and imported saved file into same environment, I was successfully restored thr groups.But I am failing to restore the user settings.
Any help or suggestions on this issue is greately appreciated.
Thanks in advance!

Importing into the same environment is not supported.
Instead, you could create all the test users in production with all the roles and then deactivate the user, so they are not usable.
After you overwrite the non-production DBs with the production DB, you could then run a script (you will have to create it first) to activate all the users.
Will this work for you?
Segal

Very Urgent - Export Oracle 10G and Import Oracle 9i

Dear Friends,
I am in a very tense sitution. Please help to sort out this problem. I am running an application against Oracle 10G. Now I want the the data of the application running under 10G(server A) to be imported to Oracle 9i (another Server B) and run the same application. What should I do so that i can export the data from Oracle 10G and import in Oracle 9i.
Please treat this as very urgent.

You need to post your question in the database forum. This forum is for Oracle Forms. There are database tools such as SQL Developer that let you move data back and forth between databases.

Any value in exporting iPhoto pictures and importing them into Aperture?

I am moving from iPhoto into Aperture (moving my library again actually) and I know that iPhoto and Aperture can share the iPhoto library once it has been updated but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library? The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original. A couple of weeks ago I moved my iPhoto library onto an external LaCie SSD disk to use with my MacBook Pro but unfortunately corrupted that library and have to make the move again. If there is any value in changing how I'm managing my library I should do it now.
The library corruption was caused by me needing to leave for work and disconnecting the LaCie before Aperture was done sync'ing with my Flickr account. When I tried to use Aperture the next day it was not able to repair/rebuild or use the iPhoto library at all. I was unfortunately not backing up the external disk so I lost everything that I had done to clean up the library after the move. One lesson that I learned was do not automatically sync with Flickr because doing this on an MBP via wireless with an external disk library can add a lot of delay to shutting down Aperture after an MBP wakeup.

Just in case you have not come across these:
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Aperture 3.3: How to use Aperture to merge iPhoto libraries
but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library?
You can - an it will depend on what you want to achieve, if that will usefull. The way to do this would be by imprting your iPhoto library into an Aperture library using Aperture. But Aperture libraries and iPhoto libraries are now interchangable - both are photo libraries, and you could simply use your iPhoto library in Aperture and be done now.
Some reasons why you would want to turn your iPhoto library into a library recognized as Aperture library by importing it into a new, empty Aperture Library:
As long as the photo library will have the "Kind: iPhoto library", you will have to upgrade both iPhoto and Aperture always to the newest versions, or you will not be able to upgrade to a new library format, when a new release of Aperture comes - say (iPhoto '12 and Aperture 4); you will probably have to buy both new releases to continue working with your iPhoto Library in Aperture.
If the kind of your library is "Kind: iPhoto library", it will appear in the Media Browser in the iPhoto section, not in the Aperture section, even if you are using it as your Aperture library. And before syncing with iTunes you will always have to open the Aperture library in iPhoto to point iTunes to it.
Also, in Aperture you have more control about what will be included in your library - In iPhoto there is no way to specify the size and quality of previews. If you do not want or need previews, or you want smaller previews, or no Faces, it would make sense to recreate your iPhoto library by importing it into a new, empty Aperture Library.
If you have more than one iPhoto Library, you can merge them into one big Aperture library to be able to browse all your images without having to switch between libraries. Aperture works very well with really big libraries. There is no need to split libraries.
The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original.
That is what I meant by having more control on what will be stored. iPhoto will always store a very high quality preview of your edited version; in Aperture you can decide what the preview size and quality will be. But Previews and originals are not duplicates; they are not the same image.
Regards
Léonie

Export from Thunderbird and import into OS X Mail

Hi guys,
I'm growing tired of Thunderbird and I want to go back to OS X MAIL.
Problem is : it doesn't import properly.
Here's what I've done :
In OS X MAIL, I select IMPORT and then THUNDERBIRD and finally select the THUNDERBIRD PROFILE FOLDER in my LIBRARY.
It does work and import emails... but not all of them.
In fact, it does not import several local mail folders I have in Thunderbird.
So that's quite a big problem since i need those folders and the emails within them.
I've looked in Thunderbird for a way to export a clean file, but it doesn't seem like there's even an export feature ?
Anyway can give me a helping hand ?
Thanks !

So that's what I did.
I took the files in Library/Thunderbird / ... under my profile
I dumped the .MSF files, and renames the other files to .MBOX
Then I used the IMPORT function in OS X MAIL
It seemed to work and I was quite satisfied !
Until I double check... and realised that a LOT of emails had not been imported, for reasons that I do not quite understand...
So if you know why, please help !!!!!

SAPScript: export print form and import with different name?

Hi!
I need to export print form from one system and import it with different name to other system.
For this I run RSTXSCRP but the problem is that when I spefify different name for a form while importing, it gives an error...
I tried to edit exported file before importing changing form name inside a file, but this not helped...
Any ideas?
Will reward,
Mindaugas

thanks for input, but I probably do not understand what you mean...
here is what I need:
for example: if I have ZNEWFORM in system1, then I need to export it from system1 and to import to system2 with form name ZNEWFORM_ZZ... is it possible?
thanks again,
M.

Oracle VM for SPARC (p.k.a. LDOM) export as backup and import procedures

Hi all,
We have a new T3-2 and we upgraded the Oracle VM to 2.1. We use other VM technologies and with some of them you can export an image and store it so you can use the disk resources for more images. We have a situation were we need to use this server for mulitiple purposes at different times and we can't fit all the images on the server concurrently. Is there a good method for backing up the image so we can remove it from the server's disks and later move it back in. This is for non-production development purposes. I only see things about migration between multilple VM servers and not offdisk storage and recovery.
Thanks,
-Steve

Could flash archive [1] be suitable for your needs?
[1] http://download.oracle.com/docs/cd/E19253-01/817-5668/index.html

Image "Squeezed" when export to compressor and import to DSP

I've Edited and created many 4:3 movies and not had problems creating DVDs. This is my first HiDef footage that I captured in FCP as DV.
Looks good in letterbox in Final Cut. I exported to compressor in order to later create DVD in DSP. I made sure I exported using the 16:9 option with compressor. When previewing in DSP, the image looks "squished".
Am I not exporting it properly for what I need to do? Is there a setting in DSP that I need to change in order to create a 16:9 DVD?
Thanks in advance

First, you should bring your footage to DVD SP as 16:9 anamorphic, not letterboxed.
Setting preferences for a 16:9 project:
Open DVD studio pro.
If a project is open just close it.
In DVD SP preferences choose "Project" and make sure DVD Standard is set to 'SD DVD'.
Click apply.
Open the "General" tab and in the SD DVD Menus, Tracks and Slideshows dropdown choose '16:9 Letterbox'.
Click apply then the OK button.
You are now ready to create a new 16:9 project.
Import your footage and get to work.

How to export a schema and import the schema to a different schema name

I am using Oracle9i Oracle Enterprise Manager Console.
I can export the HR to a dmp file.
I have created another user call MYHR and I would like to import hr.dmp to the new user.
1. How can I add a schema using OEM?
I can do it by creating a table in MYHR and refresh OEM.
2. How can I import HR.dmp to MYHR using OEM.
I can import it using command line:
imp user/password@connectstring file='c:\hr.dmp' full='Y'
Any hints are appreciated

Hi,
1.
You don't have to create a schema explictly.
Say you create a user u1. Now this user u1 create some object s, then the schema u1 is automatically created.
Schema is actually a logical collection of objects.
2.
Why using OEM for importing. Using the command is much more easier.
Your command is bit incorrect. Don't use full=y to import a schema.
Use ; imp userid=user/password@connect_string file=filename fromuser=HR touser=MYHR
Better add "log=some text file". Then use can see the log also.
Regards.

Export single edition and import in a content with others magazines: EDIT

I am trying to import files exported from a single edition from another userID. Now I want to have that magazine in a new kiosk with others. Is it possible?
I try:
import files downloaded from the single edition "Folio, xml, etc...."
Share from the other uerID the magazine, but I cant see and edit the content.
Do I have to re-use the indesign files to copy the mag in another user? :/
Thank you very much!

turn your single edition folio into an online folio, share with the other account, use the copy folio feature to copy from account A into account B.
There is no way to import content that was exported using the export feature in folio producer

Export of Objecttypes and Import of Objecttypes

Hallo,
I have tried to export 2 of my Objecttypes and their Objekttables
(worked fine without errors) and then I wanted to import these
and I get this error message:
IMP-00017: following statement failed with ORACLE error 2304:
"CREATE TYPE "Test_T" TIMESTAMP ?-08-11:16:47:02' OID 'FE11"
"78629D4D68ACE030A8C0C10C0F27' AS OBJECT("
"id NUMBER(8),"
"schl NUMBER(4),"
"name VARCHAR2(45)"
IMP-00003: ORACLE error 2304 encountered
ORA-02304: invalid object identifier literal
IMP-00063: Warning: Skipping table ...
I have looked around in the net and I can not import in a database where this oid
already exits. Is that right? Are there any possibilties I can get this data in another way
in the database. Or can I only import in a new instance where these OIDs do not exist?
If I import in a new instance there shouldn't be problems? In one of the tables I have a ref column.
thanks in advance Tig

Apologies for picking up this late thread, however in one of my imports I ran into the same issue.
It seems that when a Database has a object type, it can belong to only one schema and when you import it into another schema, Oracle craps out saying that the OID is already there.
I wonder why this issue is not with tables or such?
Any way, what I have seen is that even if Oracle bails out with error message similar to the one below, the import completes successfully, i.e,. all tables/indexes/constraints are built.
Is this the correct behaviour?
Dr. Tom
http://asktom.oracle.com/pls/ask/f?p=4950:8:8181797251248283055::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:1323002416801

Exporting in Unix and importing in Windows

Hi,
I have exported a DB in Unix, I connected from my windows client and exported the db.
I want to import this to in to a DB created on windows. The versions of oracle are the same(exp db and imp db). Can I perform normal import or do I have to handle anything special since the platforms are different.
I tried to import and I have noticed the following error in my log file.ORA-23327: imported deferred rpc data does not match string of importing db .
The oracle version is 10.2.0.3
Window 2003.
Thank you

Hi tcklion,
Could you pls check how to import the data dump from windows to unix
(Note: the dump has taken from windows and i transferred through FTP by binary mode..
Any soultion..:-)
I am getting an error that Oracle table or view does not eexist, but the import of that database is done properly with msg, "Importing Done Successfully Without any warnings"

Exporting custom setting and importing custom setting

Similar Messages

Maybe you are looking for