Exporting cut off?!!

When i export footage to .wmv and go back and watch it, it gets cut at the 23 second mark every time, this is extremley frutrating. i also would like to know how to set your timeline for 24fps, as well as export in 24fps. thanks guys
G5 dual 2 ghz ATI 9800w/256mb Mac OS X (10.0.x)

are you using a demo from flip for mac.demo version has 30 sec limit.
for 24 frame set up your sequence that way. look in easy setups to see if there is one already made or get close to what you want capture etc highlight the sequence and adjust the settings accordingly. make sure the same frame rate is in capture as well as sequence. when you shoot if your in dv you'll have to do 24PA to be able to remove pulldown the edit. lots of posts on how to 24PA

Similar Messages

Export Cuts Off (Incomplete)

Hi,
I have some .caf files and I'm trying to convert to MP3. I did some search to self-educate, and I know .caf is same as aiff (just different extension). With that said, QuickTime can export both files and convert them to wave, au, or aiff. The problem is, no matter what format I use, the end-product comes out shorter. It's a person reading a sentence (only 2-3 seconds or so), but it gets cut off before the sentence can finish.
Does anyone know any solutions to this? Or, other more reliable way to convert them? Currently, I'm using Windows 7 Ultimate 64bit. Thank you.

T> I purchased the full version already. Does this mean it's not being recognized. I've used it before and it worked fine. <
So you purchased it, we get that. But that doesn't mean you entered the serial number data correctly or didn't throw away your registration file by some silly mistake.
30 seconds is the limit on the demo version.
You obviously have the demo version enabled. Reinitialize the purchase registration. Hope you didn't throw away your receipt.
bogiesan

Exporting cuts off last two frames of project

For the last while now, Premiere CS6 and Media Encoder continue to cut off the last two frames of any project I export. It doesn't matter what export formats I choose, it always happens. My short term solution has been to extend the project by two frames but sometimes that doesn't even work. Anyone else have this issue? It's really becoming a bother. And yes, I've checked to make sure the entire project is selected in the export and media encoder windows.
Thanks

stk97
Thanks for the follow up information.
Before we advance on the cropping details and considerations, let us rule in or out the set up of the project as well as the export choices and settings as causes of the problems.
If you have video 1440 x 1080 HD anamorphic 16:9, then the project preset should be (assuming NTSC setup)
NTSC
AVCHD
HD1080i30
Now, when you go to export your edited Timeline content, if we go for a H.264.mov export
Share/Computer/QuickTime with Presets = NTSC DV 16:9
Click on the Advanced Button there.
Under the Advanced Button/Video Tab, set according to the screenshot for Video Tab....
Some of the export settings in the screenshot got cut off in the screen capture. The essential ones are the ones you see (for now).
The BItrate which is further down (not seen here) is left with no check mark before "Limit Data Rate To...". We will work on that later if file size becoms an issue. The main purpose of the above is to see if we can get a good video just with attention to project setup and export settings.
We will be watching for your results.
If any questions or need clarification on any of this, please do not hesitate to ask.
Thanks.
ATR

Premiere elements 9 exporting cuts off certain scenes

Whenever I export a video from premeiere elements 9, any scene in which I used a green screen key gets messed up and cut of at the bottom. I have a project due in a day. How can I fix this?

stk97
Thanks for the follow up information.
Before we advance on the cropping details and considerations, let us rule in or out the set up of the project as well as the export choices and settings as causes of the problems.
If you have video 1440 x 1080 HD anamorphic 16:9, then the project preset should be (assuming NTSC setup)
NTSC
AVCHD
HD1080i30
Now, when you go to export your edited Timeline content, if we go for a H.264.mov export
Share/Computer/QuickTime with Presets = NTSC DV 16:9
Click on the Advanced Button there.
Under the Advanced Button/Video Tab, set according to the screenshot for Video Tab....
Some of the export settings in the screenshot got cut off in the screen capture. The essential ones are the ones you see (for now).
The BItrate which is further down (not seen here) is left with no check mark before "Limit Data Rate To...". We will work on that later if file size becoms an issue. The main purpose of the above is to see if we can get a good video just with attention to project setup and export settings.
We will be watching for your results.
If any questions or need clarification on any of this, please do not hesitate to ask.
Thanks.
ATR

Export to WMV cuts off - I have no dissolves

I see there's been problems exporting to WMVs and having the export cut off at a dissolve...but I don't have any dissolves. A co-worker has the same problem. We're both running FCP 7.0.2.
What could be the problem?
Lisa

Flip4Mac installs windows media components onto your Mac.
The free version installs the playback components, as well as a 'teaser' version of the encoder. It will encode, just not your whole file. It is installing components, so it works across the Mac platform.
Once you upgrade to one of the paid versions, you can encode entire files.
Your free version is cutting the encode short, not the playback.
I would suggest stepping up to the StudioHD version, you get much higher quality and much greater control of your exports.

Export to text file cuts off data...

I have a report that contains fixed width formuals that are in a text box. The data is 496 char wide. It will preview fine in a small font - but when I export to a text file it re-sizes the font to courer new 10 and cuts off data after 80 char. Any ideas?

hi
as per my experience crystal has got some weird limitation in export.
AG

Exporting to PDF cutting off right side of the page.

I am exporting a Crystal Report to PDF. This works perfect on our development and staging server. However, on the production server the PDF is cut off on the right. Like, instead of being 8.5" wide, it looks to be about 7.5" wide? It just cut off the right side of the PDF. Very weird. Republished the site but did not change anything.
But here's the odd part. We have another Crystal Report on the production server that exports to PDF just fine. Just this one report, "invoice2.rpt", is having issues. "invoice2.rpt" was originally copied from "invoice.rpt" so all of the settings (that I have looked at) are exactly the same. This report was formatted a little differently than the original.
Does anyone have any thoughts about what might be causing this to happen?
Thanks,
Randy

Hi Randy,
I have seen a similar issue in the past and the problem was due to the fact that some fields and or objects were placed in part or completely outside of the margins of the report. This can be checked opening the report from Crystal Reports > Design view.
I would suggest opening the report from Crystal Reports, select the option 'No printer' from File menu>Page setup and double-check that the report has been created inside the report margins (From Design View, the report space should be white except if the background colour has been modified).
If this does not help, please clarify if the issue is faced from Crystal Reports or from Business Objects Enterprise/Crystal Reports Server and the version you are using.
Thank you,
Selenia

Sides of Keynote presentation cut off when exported to iDVD

Hi,
I have a keynote presentation with the slides set to 800X600 that I am trying to burn to a DVD. I am able to burn fine but when it plays on my DVD player and CRT Samsung TV, the sides of the slides are cut off so that the first and last letters of many lines are not viewable. I also tried on a friend's TV with the same results The DVD looks fine when playing on my iMac but it's widescreen.
I first tried exporting the keynote presentation as a quicktime movie set to full quality 800X600. The next time I exported to iDVD which first exported to a quicktime movie with a size of 720X540. I thought that would fix it but that presentation also has the sides cut off. The iDVD project is using a standard 4:3 aspect ration. Should I try a widescreen project or won't that make more of the slide disappear. Any help would be much apprecitated.

Your problem is that while on a monitor, you can see the entire picture. Any DVD player connected to a standard television is going to show, at most, 90% of the image...some may only show 80%. This is due to something called Overscan on televisions. To account for this overscan, you have to make sure that as you're creating your presentation, you have nothing near the edges.
A good rule of thumb is to create an area that's 80% of the size of your presentation (in 4:3 resolutions, widescreen, you only have to worry about the right and left) and, as you're creating, keep dropping this shape onto your presentation slides to make sure you're inside it. Then, you'll be pretty sure that even on the worst televisions, all you information will show.

Strokes on appearance is getting cut off when exporting for web & Devices

I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
Is there any setting either in illustrator or windows that may be causing this anomaly?

Try adding:
Effect >> Path >> Outline Object
So your type will still be editable
If that does not work you may want to:
Type: Create Outline
I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

Printing in Adobe Reader after exporting from InDesign gets cut-off

I have exported a few documents form InDesign to PDF. When I print the documents, some parts get cut off (top section or bottom section) but there is still room on the paper. I'ts like the printer decides not to print those sections. I am printing on 5x7inch paper and all my documents show their sizes as 5x7inches.

Turns out the issue was with Acrobat.
See resolution here.
http://forums.adobe.com/message/4496809#4496809

JPG image shows up fine in layout but a section gets cut off a little at the bottom in exported PDF

I've got a JPG inserted at the top of the page and there are text boxes below it. In the layout everything looks fine, nothing is overlapping or getting cut off. But when I export the image (best quality) as a PDF, a few of the letters in the JPG look cut off at the bottom. The image looks like it's aligned straight so I'm not sure why it's only showing some of the letters in the middle section look like the bottoms have been chopped. Any ideas what the problem is and how to fix it? Thanks!

urghhh not working still. all of my child folders are in the root folder...sorry for the confusion. the only files in the Template folder are the parent templates. i really don't know what's causing this. i've checked my css file..it's properly linked to the main templates. everything appears perfectly in FF so i'm assuming that if it were a general prob, the pages shouldn't have shown in FF at all. the index pages previews fine in IE and the old pages do as well, except for a few distortions bc i've changed the css rules. but now i also realize that the html file from which created the template isn't showing in IE as well but only in FF so the prob might have started from there but why?? i've checked everything...at least so i think.

16:9 video sides cut off when exported from After Effects

When I export a 16:9 video from After Effects, the sides are cut off in the exported clip. I've tried different export settings and and my composition settings are correct, from what I can tell. Does anyone know why this could be happening?
Thanks!

and my composition settings are correct, from what I can tell.
But are they really? We cannot know, because you don't say anything about your exact render settings and comp settings, which is what is required here. You could be using an unsuitable CoDec or even crop your output inadvertently by using a specific output module setting....
Mylenium

Exporting movie to idvd, titles cut off

After searching other users problems w/this issue I've tried switching the movie aspect to 4:3 (standard), no luck. Title/captions that are in the upper left, lower right get cut off. In idvd you can use the tv safe area to help you avoid problems like this, but there isn't one (is there?) in imovie.
ONCE exported to idvd is there a way to shift the captions/titles over, so they are completely visible?
OR do I have to go back to the movie & re do all the captions/titles?
thanks!
using imovie9, MBP, OS 10.5.8

After searching other users problems w/this issue I've tried switching the movie aspect to 4:3 (standard), no luck. Title/captions that are in the upper left, lower right get cut off. In idvd you can use the tv safe area to help you avoid problems like this, but there isn't one (is there?) in imovie.
ONCE exported to idvd is there a way to shift the captions/titles over, so they are completely visible?
OR do I have to go back to the movie & re do all the captions/titles?
thanks!
using imovie9, MBP, OS 10.5.8

Final Cut Pro project cut off in Quicktime after export

I made my edited movie in Final Cut Pro 4.0-about 3 min long- After I exported it as a "Quicktime Movie) left the compression and self contained boxes unchecked--and checked DV NTSC 48 Khts..It plays better and with enhanced resolution than using "default" settings --It cuts off about less than a minute of my movie when viewing it in my Quicktime Player... Please Help!
i book G4 Mac OS X (10.3.9) Laptop

Have you done a Spotlight search of your system?
Russ

Exporting to PNG from Adobe Illustrator cutting off edges

I created a 40px x 40px image in Adobe Illustrator CS4. I saved as an .ai file and then tried to export as a PNG.
Adobe Illustrator automatically crops the background and tightens the export to a rect around all the objects which if fine. In this case, I am not working edge to edge so my image is not quite 40px wide.
But, unfortunately, Illustrator is not exporting the entire image. I end up with an image that is 34px wide. Indeed, the icon I draw starts on the left hand side but the right edge of my object cut off.
Any ideas why this is happening? I can't imagine Illustrator CS4 can't correctly to export to PNG.

Can't necessarily explain the reason for the cutoff without knowing more, but you might be able to solve it by adding a 40 x 40 square with no fill or stroke and including it in the export.

Exporting cut off?!!

Similar Messages

Maybe you are looking for