Exporting data in Applicationmanager fails with Error 10054
Hi all,when I try to export data via Applicationmanager the Application terminates immediately with an error message "can't read data - Error 10054 - network error" "can't write data - Error 10054 - network error" and sometimes with the errormessage "unable to allocate memory - Error 10054".We have an IBM server 340 with 1 GByte Ram, Harddisk Space for Hyperion about 3 GByte in RAID 1.Essbase 6.1.Does anybody know that problem???Help to solve that issue would be great. ThanxJoerg [email protected]
A couple of tips:1. Try stoping and restarting the application then try to export2. If that doesn't work try stopping and restarting the applicationa and the server and reconnecting then doing th eecport.3. Check to see that you have a good connection to the server. When you run an export you must maintain a connection to the server, if you lose it the ecport stops.4. If all else fails open Application Manager on the server itself and run the export from there.Hope this helps,CB
Similar Messages
-
Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
MudassarThats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Standard Data Collection Failing with Error ORA-04054: database link does not exist.
Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1) -
703: Subdaemon connect to data store failed with error TT9999
All,
I'm getting the following error whilst trying to connect to a TimesTen DB:
connect "DSN=my_cachedb";
703: Subdaemon connect to data store failed with error TT9999
In the tterrors.log:
16:39:24.71 Warn: : 2568: 3596 ------------------: subdaemon process exited
16:39:24.71 Warn: : 2568: 3596 exited while connected to data store '/u01/ttdata/datastores/my_cachedb' shm 33554529 count=1
16:39:24.71 Warn: : 2568: daRecovery: subdaemon 3596, managing data store, failed: invalidate (failcode=202)
16:39:24.71 Warn: : 2568: Invalidating the data store (failcode 202, recovery for 3596)
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc -2 err1 703 err2 9999
16:39:24.72 Warn: : 2568: 3619 Subdaemon reports creation failure
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Deleting 3619/0x1558650/'/u01/ttdata/datastores/my_cachedb' - from association table - not found
16:39:24.72 Err : : 2568: TT14004: TimesTen daemon creation failed: Could not del from dbByPid internal table
16:39:24.81 Warn: : 2568: child process 3596 terminated with signal 11
16:39:25.09 Err : : 2568: TT14000: TimesTen daemon internal error: daRecovery for 3619: No such data store '/u01/ttdata/datastores/my_cachedb'
I've checked and the datastore does exist and is owned by the timesten UNIX user.
ttversion:
TimesTen Release 11.2.2.2.0 (64 bit Linux/x86_64) (tt1122:53396) 2011-12-23T09:26:28Z
Instance admin: timesten
Instance home directory: /home/timesten/TimesTen/tt1122
Group owner: timesten
Daemon home directory: /home/timesten/TimesTen/tt1122/info
PL/SQL enabled.
Datastore definition from sys.odbc.ini:
[my_cachedb]
Driver=/home/timesten/TimesTen/tt1122/lib/libtten.so
DataStore=/u01/ttdata/datastores/my_cachedb
LogDir=/u01/ttdata/logs
PermSize=40
TempSize=32
DatabaseCharacterSet=AL32UTF8
OracleNetServiceName=testdb
Kernel parameters from sysctl -a:
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
Memory / SWAP:
MemTotal: 2050784 kB
SWAP: /dev/mapper/VolGroup00-LogVol01 partition 4095992
I'm new to TimesTen and I'm planning on evaluationg it to see if it could solve an issue we're having. Any suggestions would be much appreciated.
Thanks,
Ian.Hi Ian,
Can you please answer the following / provide the following information:
1. What are your kernel parameters relating to semaphores set to? Is anything else on the mahcine using significant numbers of semaphores?
2. Please provide the output of the following shell commands:
ls -ld /u01
ls -ld /u01/ttdata
ls -ld /u01/ttdata/datastores
ls -ld /u01/ttdata/logs
3. Please provide an excerpt of the detailed message log (ttmesg.log) between around 16:38 and 16:40 (i.e. from a little while before the problem until after the problem).
Thanks,
Chris -
Planning Data Pull process failed with timeout error
Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issuePlease see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein -
Export failed with error ORA-04063: package body "SYS.DBMS_CUBE_EXP" has er
Hi
We are having 11.2.0.2 database on Linux 5. From last two days the export backup is getting failed with the below error.
. exporting post-schema procedural objects and actions
EXP-00008: ORACLE error 4063 encountered
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_CUBE_EXP.schema_i
. exporting statistics
Export terminated successfully with warnings.
When I checked the status of this package DBMS_CUBE_EXP its showing invalid. I tried to compile the body of the package. But it was throwing below error.
SQL> show errors
Errors for PACKAGE BODY DBMS_CUBE_EXP:
LINE/COL ERROR
53/5 PL/SQL: SQL Statement ignored
54/10 PL/SQL: ORA-04045: errors during recompilation/revalidation of
SYS.DBA_XDS_INSTANCE_SETS
ORA-01422: exact fetch returns more than requested number of rows
I tried to query this view or describe the above view. But it was throwing the same error.
ERROR at line 1:
ORA-04045: errors during recompilation/revalidation of
SYS.DBA_XDS_INSTANCE_SETS
ORA-01422: exact fetch returns more than requested number of rows
I couldnt get a proper solution from google regarding this view or to compile the above package.
Now we are stcuked without the backups. It would be great if you guys look into it.
Thanks
SHIYAS MYes I tried with take the export with SYS user. This time it thrown the error in the first and last too same as before.
About to export specified users ...
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 4063 encountered
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_CUBE_EXP.schema_info_exp
. exporting foreign function library names for user U_20102
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user U_20102
About to export U_20102's objects ...
I ran below scripts as per u provided the link
@$ORACLE_HOME/rdbms/admin/catdpb.sql and utlrp.sql
Still it didnt get compiled.
One more thing I tried running expdp. It totally got failed by throwing the similar error. It didnt even export the tables too.
===============================================================================
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS []
ORA-31642: the following SQL statement fails:
BEGIN "SYS"."DBMS_CUBE_EXP".SCHEMA_CALLOUT(:1,0,1,'11.02.00.00.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 1245
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 8353
----- PL/SQL Call Stack -----
object line object
handle number name
0x1a3257060 19208 package body SYS.KUPW$WORKER
0x1a3257060 8385 package body SYS.KUPW$WORKER
0x1a3257060 12748 package body SYS.KUPW$WORKER
0x1a3257060 2546 package body SYS.KUPW$WORKER
0x1a3257060 9054 package body SYS.KUPW$WORKER
0x1a3257060 1688 package body SYS.KUPW$WORKER
0x1a8bc1630 2 anonymous block
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS []
ORA-31642: the following SQL statement fails:
BEGIN "SYS"."DBMS_CUBE_EXP".SCHEMA_CALLOUT(:1,0,1,'11.02.00.00.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 1245
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 8353
----- PL/SQL Call Stack -----
object line object
handle number name
0x1a3257060 19208 package body SYS.KUPW$WORKER
0x1a3257060 8385 package body SYS.KUPW$WORKER
0x1a3257060 12748 package body SYS.KUPW$WORKER
0x1a3257060 2546 package body SYS.KUPW$WORKER
0x1a3257060 9054 package body SYS.KUPW$WORKER
0x1a3257060 1688 package body SYS.KUPW$WORKER
0x1a8bc1630 2 anonymous block
Job "SYS"."SYS_EXPORT_SCHEMA_01" stopped due to fatal error at 17:58:34
========================================================================= -
Expdp full and impdp full fails with error....pls help..!(Oracle 11g)
Hi
I wanted to refresh my dev environment quickly..
As we also wanted to migrate from exp/imp to datapump, I tried these..
Only thing worked for me is impdp on network mode using remap schema.
1)First i wanted to implement expdp and impdp standard procedures(Full database export/import)
My expdp failed with the following error on a full export..
Pls see below:
C:\Documents and Settings\oracle2>expdp system/<p.w> full=Y directory=DATA_PUMP_DIR dumpfile=OAPFULL.dmp logfile=OAPFULL.log
Export: Release 11.1.0.7.0 - Production on Thursday, 26 April, 2012 16:12:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_FULL_02": system/******** full=Y directory=DATA_PUMP_DIR dumpfile=OAPFULL.dmp logfile=OAPFULL.log
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.351 GB
Processing object type DATABASE_EXPORT/TABLESPACE
Processing object type DATABASE_EXPORT/PASSWORD_VERIFY_FUNCTION
Processing object type DATABASE_EXPORT/PROFILE
Processing object type DATABASE_EXPORT/SYS_USER/USER
Processing object type DATABASE_EXPORT/SCHEMA/USER
Processing object type DATABASE_EXPORT/ROLE
Processing object type DATABASE_EXPORT/GRANT/SYSTEM_GRANT/PROC_SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/GRANT/SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/ROLE_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA
Processing object type DATABASE_EXPORT/RESOURCE_COST
Processing object type DATABASE_EXPORT/SCHEMA/DB_LINK
Processing object type DATABASE_EXPORT/TRUSTED_DB_LINK
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/SEQUENCE
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/DIRECTORY/DIRECTORY
Processing object type DATABASE_EXPORT/DIRECTORY/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/CONTEXT
Processing object type DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYSTEM"."SYS_EXPORT_FULL_02" stopped due to fatal error at 16:14:562)As the above failed, I tried impdp with network_link import and full=y and its a different issue!
impdp system/<p.w> NETWORK_LINK=OAPLIVE.WORLD full=y logfile=OAPDRfull2.log table_exists_
action=REPLACE
Import: Release 11.1.0.7.0 - Production on Thursday, 26 April, 2012 13:36:01
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** NETWORK_LINK=OAPLIVE.WORLD full=y logfile=OAPDRfull2.log table_exists_action=REPLACE
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.670 GB
Processing object type DATABASE_EXPORT/TABLESPACE
ORA-31684: Object type TABLESPACE:"SYSAUX" already exists
*************lots more of object already exists errors here............(space limit so cant paste)***************
ORA-31684: Object type SYNONYM:"GEOPROD"."EXT_POSTAIM_PRESORT_61" already exists
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS [SYNONYM:"GEOPROD"."EXT_POSTAIM_PRESORT_61"]
ORA-31600: invalid input value 200001 for parameter HANDLE in function CLOSE
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 569
ORA-06512: at "SYS.DBMS_METADATA", line 4731
ORA-06512: at "SYS.DBMS_METADATA", line 792
ORA-06512: at "SYS.DBMS_METADATA", line 4732
ORA-06512: at "SYS.KUPW$WORKER", line 2718
ORA-03113: end-of-file on communication channel
ORA-02055: distributed update operation failed; rollback required
ORA-02063: preceding lines from OAPLIVE.WORLD
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7858
----- PL/SQL Call Stack -----
object line object
handle number name
242F2F2C 18256 package body SYS.KUPW$WORKER
242F2F2C 7885 package body SYS.KUPW$WORKER
242F2F2C 8657 package body SYS.KUPW$WORKER
242F2F2C 1545 package body SYS.KUPW$WORKER
241DDF3C 2 anonymous block
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA []
ORA-31642: the following SQL statement fails:
SELECT unique ku$.seq# from sys.metanametrans$ ku$ WHERE ku$.htype='DATABASE_EXPORT' AND ku$.model='ORACLE' AND NOT ( ku$.seq#>=(select a.seq# from sys.metanametrans$ a where
a.model='ORACLE' and a.htype='DATABASE_EXPORT' and a.name ='DATABASE_EXPORT/SCHEMA/SYNONYM')) order by ku$.seq#
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA_INT", line 5002
ORA-01427: single-row subquery returns more than one row
ORA-06512: at "SYS.DBMS_
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 7853
----- PL/SQL Call Stack -----
object line object
handle number name
242F2F2C 18256 package body SYS.KUPW$WORKER
242F2F2C 7885 package body SYS.KUPW$WORKER
242F2F2C 2744 package body SYS.KUPW$WORKER
242F2F2C 8523 package body SYS.KUPW$WORKER
242F2F2C 1545 package body SYS.KUPW$WORKER
241DDF3C 2 anonymous block
Job "SYSTEM"."SYS_IMPORT_FULL_01" stopped due to fatal error at 13:39:48So its basically these 2 issues I want to know how to fix.
1-expdp error cause and fix
2-impdp error cause and fix -Also how to avoid object alreay exists error?
Also for example the package etc. is the same name..but i want new package from LIVE so it means if the same name package, view, etc is there, it wouldnt get updated?
Any way to overcome this?
I need it exactly same as LIVE...(with a few exceptions which is small enough i can do after impdp finishes fine)
Pleaseeeeeeee help!!
Thanks&Regards.......Hi..
Thanks for the links..I applied the tips on each of them but it didnt work.
Also my database is 11g so it is not true that this happens on 10g only.
Things tried:
1)I tried with different values on parallel parameter but same error
2)I applied the following:
alter system set open_cursors=1024 scope=spfile;
alter system set "_optimizer_cost_based_transformation"=off;
commit;
The 3rd link was bit better
I tried to find out where exactly the error was causesusing
expdp attach =SYS_EXPORT_FULL_03
But I cant figure out what the object : PUBLIC
oracle/context/isearch/GetPage
is..?
Does this needs to be excluded from the export?if so, how?
Can someone help how to fix the error now?
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYSTEM"."SYS_EXPORT_FULL_03" stopped due to fatal error at 11:29:32
C:\Documents and Settings\ora2>expdp attach=SYS_EXPORT_FULL_03
Export: Release 11.1.0.7.0 - Production on Tuesday, 01 May, 2012 11:35:38
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: system
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Job: SYS_EXPORT_FULL_03
Owner: SYSTEM
Operation: EXPORT
Creator Privs: TRUE
GUID: 8499C802F52A414A8BCACE552DDF6F11
Start Time: Tuesday, 01 May, 2012 11:37:56
Mode: FULL
Instance: geooap
Max Parallelism: 1
EXPORT Job Parameters:
Parameter Name Parameter Value:
CLIENT_COMMAND system/******** parfile=h:\datapump\oapfull.par
State: IDLING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Dump File: H:\datapump\oapfull.dmp
bytes written: 4,096
Worker 1 Status:
Process Name: DW01
State: UNDEFINED
Object Schema: PUBLIC
Object Name: oracle/context/isearch/GetPage
Object Type: DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM
Completed Objects: 766
Total Objects: 766
Worker Parallelism: 1 -
Dehydration failed with error: Use introspectWLS12 command to introspect domains
Hello Experts,
I am trying to Introspect my Oracle weblogic server Locally to configure appliances on my assembly in Virtual Assembly Builder using command
# ./abctl introspectWLS -wlsHome /home/punit/Oracle/Infra/wlserver -domainRoot /home/punit/Oracle/Infra/user_projects/domains/base_domain -adminUser weblogic
but it is getting failed with error:
Use introspectWLS12 command to introspect domains based on WLS 12.1.2 and younger..
Error: OAB-7105: Introspection failed.
Caused by: Dehydrate job failed.
Caused by: OAB-50008: Use introspectWLS12 command to introspect domains based on WLS 12.1.2 and younger.
later I replaced introspectWLS with introspectWLS12 but its throwing Usage error: Command not found: introspectWLS12.
Can somebody help me in finding the exact command for version 12.1.2 to by-pass this..
FYI: I am using fmw_Infra_121200_OVAB.jar binnary bundled with JRF & FM Components on my OEL-6.0 platform
Thanks in Advance
PunitHi,
Thanks for your reply.
This icon you provided means "the DHCP server connected but current user does not have the administrative credentials to manage the server."
That's why "0x80070005. Access is denied" is received.
DHCP console icons reference
http://technet.microsoft.com/en-us/library/cc784812(WS.10).aspx
So, you need to make sure the current user have the administrative credentials to configure DHCP server. Usually members of the DHCP Administrators
group can view and modify any data at the DHCP server. DHCP Administrators can create and delete scopes, add reservations, change option values, create superscopes, or perform any other activity needed to administer the DHCP server, including export or import
of the DHCP server configuration and database. DHCP Administrators perform these tasks using the Netsh commands for DHCP or the DHCP console. For more information, see
DHCP tools.
DHCP groups
http://technet.microsoft.com/en-us/library/cc737716(WS.10).aspx
Hope this helps.
Thanks,
Robbin Meng
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked
post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Startup.dll failed with error 127
I am using CS5
master suite but premiere pro does not work, everything else works
Load Library EX startup.dll failed with error 127 the specified procedure could not be found
Does anybody ever got thie error msg ?
Please help...I followed your instructions to update to ver. 5.0.2 and it is working now
thank you for all your help
Fernando Echeverria
Engineer, Technical Support
CIG Engineering Division
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042
www.usa.canon.com
[email protected]
T 516.328.4797 C 516.492.0223 F 516.328.4849
From: Todd_Kopriva <[email protected]>
To: Fernando Echeverria <[email protected]>
Date: 11/22/2010 10:42 PM
Subject: Startup.dll failed with error 127
Have you installed the http://bit.ly/djiyh4?
Tell us about your computer, especially the operating system.
What are you doing when that error occurs? Starting the program?
Exporting?
Has this ever worked? -
The AcquireConnection method call failed with error code 0xC0202009.
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
- Pre-execute (Error)
Messages
Error 0xc0202009: {F1B3B35C-FAE3-48F6-A169-4E4D8D99F9B6}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "DestinationConnectionExcel" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination 64 - production_effectivities" (7042) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)
The entire package is running on one machine. The data source is SQL Server 2005 and the destination (this happens with both of them) is Excel or Access. Either way I cannot get the package which the wizard generated to run at all. This error occurs after the first table is exported. I'm running on WinXP SP2 with 2005 Developer and ALL components installed except analysis services.
Anyone else have this problem or know the solution?
JeffI am getting the same error. My Destination and source both are on SQL Server 2005 on the same box.
I am using SQL- Code for Source and and table as destination. When the package runnes under Transaction- TransactionOption-Supported then the packages excuted fine but it fails when i change the Transaction- TransactionOption to Required.
It fails with following error code.
[OLE DB Destination [22]] Error: The AcquireConnection method call to the connection manager "FMFCLSQADB01.DWH_Rakesh" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "OLE DB Destination" (22) failed the pre-execute phase and returned error code 0xC020801C.
[Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "FMFCLSQADB01.DWH_Rakesh"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
When i change the source SQL query to Table or View then it works fine.
Thanks for any suggestion.
Regards
Rakesh
Now, my issues related to “SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction."…..”. are fixed.
This is one of the very common errors that comes up in SSIS (SQL Server Integration service)
I have faced this issue for at-least two occasions. Both of them have one common setting: “TransactionOption” was set to “Required”.
In first case, I had multiple dataflow tasks but there were no sequence given. There were no error if I ran the package with TransactionOption=Supported. But when I ran the package in TransactionOption= Required, it got failed.
To fix the issue I have changed my package and put the entire dataflow task one after another (connected thru Constraint).
In another case, where I was doing data transfer from one server to another, I had to configure the MSDTC. -
Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name: Application
Source: MSExchangeRepl
Date: 28.09.2012 00:37:17
Event ID: 2112
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name: Application
Source: MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID: 2024
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User:
N/A
Computer: Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
- * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
MarkusHi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus -
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellmeWell here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance! -
SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.
Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssisHi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan -
Hi,
I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
Thanks,
Phil
Event Log messages:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 13/01/2013 23:14:52
Event ID: 517
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Home-Laptop
Description:
The backup operation that started at '2013-01-13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
solution, and then rerun the backup operation once the issue is resolved.
Log Name: Application
Source: Windows Backup
Date: 13/01/2013 23:14:56
Event ID: 4104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Home-Laptop
Description:
The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
new disk.
Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
Thanks again,
Phil
Hi Phil, No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
-willis -
CcmSetup failed with error code 0x80004005 - windows 8.1
using sccm 2012 r2, trying to push to a windows 8.1 client i get:
<![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
<![LOG[FSP: ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
<![LOG[ \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
<![LOG[ \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
<![LOG[ TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:4584">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
any ideas why its failing?Hi,
I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
instruction:
http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
http://blog.configmgrftw.com/configmgr-client-startup-script/
There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP
Maybe you are looking for
-
Authorization on Query Print Layout Report
Hi Experts, Is there a way to limit users from generating Query Print Layout which they are not suppose to generate? Currently, all query print layout is exposed to all users, but I want to limit which users who can access specific reports only and t
-
Finder shows incorrect modification date
Another horrible finder bug. It showed a wrong modification date for a pdf file that I had just changed. The date shown was 22 januari, but the correct date, which was displayed only after relauching finder, was 18 februari. The shell command "ls -al
-
I need to download Acrobatt X Std. for reinstallation
I need to download Acrobat X Std. for reinstallation Where do I find it and can you please provide a link? Here is my SN from what came with the Dell computer: <serial number removed by moderator>
-
Cant change an existing account (FS00)
Hi If I have created and saved an account via FS00 I want to change the short- and long description of it. I am in FS00 again, I am in change mod but I can change every parameter but the short- and long description which is grey. Could anybody help m
-
Font looping issue in Illustrator CS5
My Ilustrator either loops fonts (1 - 10 approx.) or it stop at one font and can't move forward. Photoshop doesnt have this problem. My friend has all the same fonts as me, but his works fine. Once i opened a the original document i created on my cop