Exporting definition of the external file - please help.
Hello to all of you wonderful people.
either me or my machine are just about to jump out of the window here..
I have imported external file into OWB - no problem at all - everything singing and dancing.
I now need to export this file and 'tweak' it a bit, rename and reimport - to save typing gazillion column names for other files i have to import.
It was possible to do so in OWB 9i, however, everytime i am trying to do it i get this error message:
Warning: MDL1427: Cannot export selected PROJECT <ADMIN> because it does not exist in target repository.
Firstly,Of cause it is not in target repository - it is an external file! once i load my target table with it,it will be in target repository.
secondly, I DO NOT HAVE A PROJECT CALLED <ADMIN>...
Googled it and searched oracle, technet etc - to no avail. found only one entry for it on this amazing forum... but no solution :(
Dearest Tom OWB it was your post about a month ago - did you manage to find out what that mean and how to go about it?
Any help/hints would be greatly appreciated.
Thank you very much for all your help and support regarding this issue.
Kind Regards
Vix
Now I remember!
There are two different ways to export the metadata. Clicking a project or object name less options and for me the error above.
However if I click on the project and go to the top menu and to Design > Export > Warehouse Builder Metadata I am able to export the metadata fine. You also get access to the advanced tab this way.
Bit strange but awell.
Cheers,
James
Similar Messages
-
Actionscript not working on the HTML file PLEASE HELP
Hello,
I made a website in flash, you can download everything here, because I need this problem fixed by Monday http://www.mediafire.com/?sharekey=e5d0b30598ff413aa0f2f20c509059d9e04e75f6e8ebb871
The problem is, when I publish the file, and run the html file, the actionscript doesn't work. When I run the project in flash it works perfectly. I do not believe it is the player or anything of that sort that is wrong, although I can not be sure. I've tried this on like 10 different computers, and none were able to load the actionscript. Does anyone know why the actionscript wouldn't be working when I run the html file for the site?
Please Help, Thank you.Hi !
Don't panic yet
I think you didn't select the Flash with SFCommand in the HTML tab inside the Template dropdown menu, that's the reason your Actions Scripts doesn't work in the html view.
To access hold down CTRL+SHIFT+F12--->HTML tab--->The first dropdown menu at the top
Hope this solve your problem. -
hello sir
my system needs itunes64 file i don't know from where i should get this file cuz my iphone 4 is all the time synced with this computer all the back up are in this computer i dont want to lose it coz i did restore once so i dont have all the data in my phone i have it in itunes please help me with itunes 64
thank youBack up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with a mirroring tool such as "Carbon Copy Cloner." Preferably both.
Boot into Recovery mode, launch Disk Utility, and erase the startup volume with the default options. This operation will destroy all data on the volume, so you had be better be sure of your backups. Quit Disk Utility and install OS X. When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups.
Transfer only "Users" and "Settings" – not "Applications" or "Other files." Don't transfer the Guest account, if it was enabled on the old system. Test. If the problem is still there, the cause is external to the machine, or else you're dealing with a bug or a hardware fault.
If the problem is resolved, reinstall your third-party software cautiously. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem. -
How to play the audio file please help me
i would like to play audio files such wav files, au files etc
I would like to know how to play audio file easily in Applet and
applications
Thank youimport sun.audio.*; //import the sun.audio package
import java.io.*;
//** add this into your application code as appropriate
// Open an input stream to the audio file.
InputStream in = new FileInputStream(Filename);
// Create an AudioStream object from the input stream.
AudioStream as = new AudioStream(in);
// Use the static class member "player" from class AudioPlayer to play
// clip.
AudioPlayer.player.start(as);
// Similarly, to stop the audio.
AudioPlayer.player.stop(as); -
As it say's above i need to delete some of my oldinvoices/estimates from my files in pages, i can get rid of the text but not the whole file, thanks Dennis
You locate the file in the Finder(it's in the Documents item of the sidebar by default), drag it to the Trash, and empty the Trash.
(59926) -
On my new Imac I saved some files on the free trial version of Pages, since downloading the full version from Apple, have been unable to save or print from old files saved when using the trial version. Any ideas? Thank you!
My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip. -
it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?
Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything. It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one. -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.
Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra -
When I read a pdf document using Safari on my IPad I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.
Hi snoreaustralia,
It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
Best,
Sara -
Hi all! im using the OS XV10.6 not 4 sorry. Anywayz, i tried to delete all data that i dont need to have more free space. However, after i deleted all the files that i dont need, then empty the trash cane, my free space is still the same! I did research and try the "erase for free space" But it is still the same! please help!!! Is there anyway to increase my free space?
Hello, are you using Filevault perchance?
How much free space does it report if you do a Get Info on the whole drive?
Could we be confusing Memory (RAM), with Hard Drive Free Space (Virtual Memory)? -
Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!
The WD My Passport, I purchased back in early December 2013 & I just used it the other day after I updated my Macbook... & of course it says in the online manual it works for Mac Lion, Mountain Lion, Snow Leopard but not this new Maverick update. Is there anything I can do?I like the free demo of SuperDuper to make clones. It's free, Tiger and Leopard ready and is easy to use. If you buy the full version you can do incremental backups.
You should use Disk Utility to do a Disk Repair, as shown in this link, booted up on your install disk, before you make a clone of it.
I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition.
With a clone on an external FireWire drive (USB drives are not bootable on some Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on Macs. Check the drive's manual to be sure.
DALE -
I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.
For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
Illustrator CS4 wont save files, please help?
You can edit a file, go to save, close it down, then when you re-open it the changes made have not been saved?? No error message or warning pops up, and it all looks ok like it has saved properly, until you open it up again. This also happens when you use 'save as' command if you use the original file name. If however you type in a different file name - it saves ok. But obviously that is not great as you cant now trust or rely on the save mechanism of the programme, to make sure any changes to artwork have been stored!! I have never seen an issue like this, it is worrying, I hope somebody can help?
Thanks.
We are running CS4 on windows7 - yes PC!!!We save in EPS, and its not just one file, its a variety of different files and it seems to be random as to which files it does it on, some work fine - some don't. And it can be anything from a minor text change to a colour change, it doesnt seem to matter on the change made, it reacts the same.
The files are saved over a network connection to a large external hard drive.
Its really puzzling and now starting to cause problems as we do a fair bit of work in it, and can't trust one of the most important features, and that any changes that have been done have been saved and stored!
Hope maybe you can help with any thoughts at all.
Cheers.
Date: Thu, 24 Jun 2010 03:41:40 -0600
From: [email protected]
To: [email protected]
Subject: Illustrator CS4 wont save files, please help?
What file format do you save it in?
What kinds of changes did you make in that file?
Where do you save the file (removable or network media)?
> -
I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC.
Yes I just discovered that this morning but I have purchased another external harddrive and formatted it for both and am in the process of transferring the files across it and then I will erase the old harddrive and reformat it so I can use it.
I have learnt to format harddrives from this experience but am happy to see the back of parallells.
Thank you for your help though it is much appreciated.
Maybe you are looking for
-
Hello, My phone is not working at all. I had this problem before and I was trying to find a solution. However, at Apple Store in UK I was told to send my phone to Canada due to fact that I bought it there. What should I do and who will cover all my p
-
How to calculate Number of Hours between 2 dates
Hi, I have a Column in a table of datatype DATE i.e. Update_Date. Now How do I calculate number of hours passed starting from this date entered in the Update_Date column to SYSDATE. e.g. if the date in column is 2-FEB-2009 and the sysdate is 2/2/2009
-
Site problems in Firefox and Internet Explorer
Here's my site: http://davesnowgraphics.com/DSG/Home.html Created in iWeb '08. Here is a list of problems. Solutions welcome. 1) In all browsers: links to internal pages open up in a new window or tab. As an internal link, the option to "Open page in
-
I have 2 Content Sources crawled to URL1 and URL2. While searching in 'Everything' navigation link, I need to have a URL1 refiner on the left that shows only contents from URL1. Can I do that?
-
Customer Service/Service Management Issues
Could anyone suggest me that where can I create the Customer Service/Service Management Discussions? I hope it will be in Enterprise Asset Management, if not please guide me. Anandkumar KS