Exporting - Does it send Originals?
I'm finally taking the time to backup my iPhoto Library. Rather than using the Burn command - since that keeps the photos in IPhoto format, I'm choosing to use the Export file command. Couple questions:
1. When I select the pictures and Export - does it Export the image that I see on the screen or does it export the 'Original' file?
2. If it does not Export the 'Original' file - do I have to batch process and Return to Original and then Export?
Thanks - hope this question made sense!
I was having the issue with images that i tried to export, email or drag to the desktop. I think I found out how to fix it. At least, this worked for me:
• Quit iPhoto.
• Go to Finder/Username/Library/Preferences.
• Drag the file "com.apple.iPhoto.plist to the trash.
• Reopen iPhoto.
Similar Messages
-
TDMS Shell - DB Export from source/sender system taking a VERY long time
We're trying to build a TDMS Receiver system using the TDMS Shell technique. We've run into a situation wherein the initial DB Export from source/sender system is taking a VERY long time.
We are on ECC 6.0, running on AIX 6.1 and DB UDB v9.7. We're executing the DB export from sapinst, per instructions. Our DB export parallelizes, then the parallel processes one by one whittle away to just one remaining, and there we find out that the export is at that point single-threaded, and exporting table BSIS.
BSIS is an FI transactional data table. We're wondering why is the DB export trying to get BSIS and its contents out??? Isn't the DB export in TDMS Shell technique only supposed to get SAP essential only config and master data, and NOT transactional data?
Our BSIS table is nearly 700 GB in size by itself. That export has been running for nearly a week now, with no end in site.
What are we doing wrong? We suspect we may have missed something, but really don't think we do. We also suspect that the EXCLUSION table in the TDMS Shell technique may be the KEY to this whole thing. It's supposed to automatically exclude very large tables, but in this case, it most certainly missed out in excluding BSIS for some reason.
Anyway, we're probably going to fire up an OSS Message with SAP Support to help us address this perplexing issue. Just thought we'd throw it out there to the board to see if anyone else somewhere has run into similar circumstances and challenges. In the meantime, any feedback and/or advice would be dearly appreciated. Cheers,Hello
Dont be bothered by the other TPL file DDLDB6_LRG.TPL, we are only concerned with DDLDB6.TPl.
Answer following questions to help me analyze the situation -
1) What is the current size of export dump
2) Since when is the exports running
3) What is the size of the source DB? Do you have huge amount of custom developments?
4) Did you try to use table splitting?
5) Do you doubt that there may be other transaction tables (like BSIS) which have been exported completely?
6) Did you update the SAP Kernel of your source system to latest version before starting the Shell package?
7) Were the DB statistics update during the shell or were they already updated before starting Shell?
8) Is your system a distributed system i.e. Central instance and Database instance are on different application servers? -
The XI does not send messages with correct IDOC structure
SAP XI 3.0 sends to ECC IDOC HRMD_A07
The XI does not send messages with correct IDOC structure.
In XI Design, Software Component RHEVOLU, Ive imported the Objects
HRMD_A.HRMD_A07 from SAP ECC; In Tools -> Export Reduced XSD, I saved
HRMD_A.HRMD_A07.xsd in Namespace http://suezambiental.com.br/HR . At
Message Mapping -> mmAdmissao, in Imported Message -> Import XML or
XSD, I imported the reduced Idoc file generated above, mapping source
fields to target fields.
The IDOC sent from XI to ECC has this structure (template: 22122)
E1PLOGI
E1PORIG
E1PITYP
E1P0000
E1P0001
E1P0002
Status 53 -HR: ALE inbound processing for HR master data
But does not update HR Master data.
The structure expected in ECC side (template: 20376) is:
E1PLOGI
E1PORIG
E1PITYP
E1P0000
E1PITYP
E1P0001
E1PITYP
E1P0002
Status 53 -HR: ALE inbound processing for HR master data
By using WE19 transaction, this structure was changed manually; so, the
HR Master data was updated.
Witch kind of customizing or correction could be made in XI, to send
the correct structure to ECC?
Best Regards
ClaudioHi Claudio,
In your case, there are perhaps two causes:
1. perhaps when you have import the idoc, for a strange reason, a bad metadata was created by XI. You can clean this one in tcode <b>IDX2</b> (Idoc metadata cache).
2. but it's also probably an error in your Message Mapping. Have you correctly manage segment E1PITYP?
Regards
Mickael -
User created apple id account, verified but know she is unable to log on, it says incorrect password, she tried to reset via forgot password option but it does not send reset password page to here e- mail address, how can i get this sorted? or how can i get her whole apple account deleted and created new one using same e - mail address?
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
-
I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.
If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues. -
Appstudio exporter does not contain a valid signature
HI I am trying to install AppStudio plugin to work with InDesign but Extension Manager is throwing the following error...
appstudio exporter does not contain a valid signature !
I have updated all software.
(I am downloading new apps in the background)
I have a CC subscriptionHi,
please click "tools"->"preferences", unselect "Allow Extension Manager to access Internet" option, and then try to install it again. -
My problem is simply that Mail does not send email.
I have just migrated from iMac G5 to iMac Intel by using Migration Assistant. Everything else works just fine and I can receive email. However, if I try to reply, forward or send a new email message, Mail just does not do anything - no error message, nothing.
The fixes I have tried so far are removing the Mail plist file, repairing disk permissions and mailboxes. Of course, I have checked the account settings, especially outgoing server settings. I also reinstalled Mail application with Pacifist. None of this has solved the problem. I have tried sending email with Thunderbird and it works with no problems.
Does anybody have any suggestions how to fix this issue?
The OS is 10.4.8, Mail Version 2.0.6 (749.2/752.3), all the suggested software updates done.
iMac Core Duo 20" 2GHz Mac OS X (10.4.8)Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong within your home folder or at the server or with the network, and may even introduce new issues if not done properly. Moreover, in Mac OS X 10.4 you don’t need Pacifist to reinstall Mail, you could also do it as described in the following article:
Custom installs in Mac OS X 10.4
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
The above won’t solve the problem. It’s just to ensure that you’ve properly reinstalled Mail, which you shouldn’t have done, and which apparently you didn’t do properly -- the version of Mail on your system should be 2.1.1, not 2.0.6.
The original problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer. -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
After Migration Exchange 2013 does not send mail outside the organization
Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin HossainWhat I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25. -
Does the sender SOAP adapter support multiple operations per interface
Hi guys,
does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
Thanks,
Andrzejtheoretically Yes.
Do have a look into this when you get time
/people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype -
Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks
In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu. -
ICloud IMAP server does not send the CAPABILITY with CRLF
IMAP iCloud server does not send the CAPABILITY response with CRLF appended as per RFC 3501. Please find the log snippet
11-05 10:50:52.462 29603 29988 D Email : open :: socket openjava.io.BufferedInputStream@43a726a8 | java.io.BufferedOutputStream@43a72b68
11-05 10:50:52.502 29603 29988 D Email : <<< #null# ["OK", ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"], "iSCREAM ready to rumble (1S:1092) st11p00mm-iscream023 [42:4469:15:50:53:39]"]
11-05 10:50:52.502 29603 29988 D Email : >>> 1 CAPABILITY
11-05 10:50:52.552 29603 29988 D Email : <<< #null# ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"]
11-05 10:50:52.562 29603 29988 D Email : <<< #1# ["OK", "!!"]
11-05 10:50:52.582 29603 29988 D Email : >>> [IMAP command redacted]
11-05 10:50:52.682 29603 29988 D Email : <<< #2# ["OK", ["CAPABILITY", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "ACL", "QUOTA", "LITERAL+", "NAMESPACE", "UIDPLUS", "CHILDREN", "BINARY", "UNSELECT", "SORT", "CATENATE", "URLAUTH", "LANGUAGE", "ESEARCH", "ESORT", "THREAD=ORDEREDSUBJECT", "THREAD=REFERENCES", "CONDSTORE", "ENABLE", "CONTEXT=SEARCH", "CONTEXT=SORT", "WITHIN", "SASL-IR", "SEARCHRES", "XSENDER", "X-NETSCAPE", "XSERVERINFO", "X-SUN-SORT", "ANNOTATE-EXPERIMENT-1", "X-UNAUTHENTICATE", "X-SUN-IMAP", "X-ANNOTATEMORE", "XUM1", "ID", "IDLE"], "User test logged in"]
11-05 10:50:52.682 29603 29988 D Email : >>> 3 CAPABILITY
11-05 10:50:52.742 29603 29988 W Email : Exception detected: Expected 000a (
)1-05 10:50:52.742 29603 29988 W Email : ) but got 000d (
This is happening only when CAPABILITY command is sent follwed by LOGIN command. Please check this issue.If you want your mail delivered properly the Official Host Name of the sending server should match the PTR (reverse DNS) of the sending IP Address, and there should be an "A" record that matches the OHN as well.
Example:
mail.yourdomain.com (Official Host Name) on 123.123.123.123
PTR for 123.123.123.123 should match mail.yourdomain.com
There should be an A record in yourdomain.com pointing to 123.123.123.123
Kostas -
My simple chat server does not send messages to connected clients
Hi!
I´m developing a chat server. But I can not get it work. My client seems to make a connection to it, but my server does not send the welcome message it is supposed to send when a client connects. Why not?
removedEdited by: Roxxor on Nov 24, 2008 10:36 AMOk, I solved my previous problem and now I have got a new really annoying one.
This is a broadcasting server which meand it can handle multiple clients and when one client sends a message to the server, the server should broadcast the message to all connected clients. It almost works, except that the server just sends the message back to the last connected client. The last connected client seems to steal the PrintStream() from the other clients. How can I solve that?
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.lang.Character;
import java.io.OutputStream;
import java.util.Vector;
public class ChatServer extends MIDlet implements CommandListener, Runnable
private Display disp;
private Vector connection = new Vector();
private TextField tf_port = new TextField("Port: ", "", 32, 2);
private Form textForm = new Form("Messages");
private Form start_serverForm = new Form("Start server", new Item[] { tf_port });
private Command mExit = new Command("Exit", Command.EXIT, 0);
private Command mStart = new Command("Start", Command.SCREEN, 0);
private Command mDisconnect = new Command("Halt server", Command.EXIT, 0);
ServerSocketConnection ssc;
SocketConnection sc;
PrintStream out;
public ChatServer()
start_serverForm.addCommand(mExit);
start_serverForm.addCommand(mStart);
start_serverForm.setCommandListener(this);
tf_port.setMaxSize(5);
textForm.addCommand(mDisconnect);
textForm.setCommandListener(this);
public void startApp()
disp = Display.getDisplay(this);
disp.setCurrent(start_serverForm);
public void pauseApp()
public void destroyApp(boolean unconditional)
public void commandAction(Command c, Displayable s)
if(c == mExit)
destroyApp(false);
notifyDestroyed();
else if(c == mStart)
Thread tr = new Thread(this);
tr.start();
else if(c == mDisconnect)
try
sc.close();
catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
destroyApp(false);
notifyDestroyed();
public void run()
try
disp.setCurrent(textForm);
ssc = (ServerSocketConnection)Connector.open("socket://:2000");
while(true)
sc = (SocketConnection) ssc.acceptAndOpen();
connection.addElement(sc);
out = new PrintStream(sc.openOutputStream());
textForm.append(sc.getAddress() + " has connected\n");
ServerToClient stc = new ServerToClient(sc);
stc.start();
catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
catch(NullPointerException err) { System.out.println("NullPointerException error: " + err.getMessage()); }
class ServerToClient extends Thread
String message;
InputStream in;
SocketConnection sc;
ServerToClient(SocketConnection sc)
this.sc = sc;
public void run()
try
in = sc.openInputStream();
int ch;
while((ch = in.read())!= -1)
System.out.print((char)ch);
char cha = (char)ch;
String str = String.valueOf(cha);
out.print(str);
//broadcast(str);
textForm.append(str);
in.close();
//out.close();
sc.close();
catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
} -
How does one send a file via UDP?
I need to send a binary file via UDP. The file has 99 32-bit binary words of data. How do I input the data to the UDP write command? I don't want to send the data sequentially..I would like to send all 99 words in a single UDP transmission. TIA.
-jlivermoreSomething to be careful of is that while UDP is fast, it is not secure. You can lose packets and there is no way for the sender or receiver to know it was lost. Because UDP doesn't have a "connection" like TCP does, the sender doesn't know if the data is going anywhere and the receivers have no way of knowing if anything is being sent.
Picture a radio station. A guy working the night shift hopes there is someone somewhere listening to his broadcast, but he doesn't know. Likewise, if you turn on a radio and hear nothing but static, you may be listening to a frequency where there are no stations broadcasting, or the station transmitter might be off the air, or there might be interference keeping you from hearing the signal, but again you don't know which.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
My iphone5 does not send as imessage to other iphone
My iphone does not sends imessage to other iphone.
This support document is for troubleshooting Messages http://support.apple.com/kb/TS2755. Remember both users have to be on iOS5 or above and have a solid data connection at the time you send. Check settings for iMessage on your device and have the receiver check as well. You may need to turn iMessage off and back on again, but read the support document.
Maybe you are looking for
-
SSLHandshakeException: Received fatal alert :handshake_failure
Hola forum, I'm having a bit of a problem with ssl sockets currently. Please bear with me as this is my first run at using ssl sockets for anything and I've done a fair bit of searching on google already. Here's the code I'm using: (kindly ignore any
-
The mystery of the invisible files... that are there...
OK, so I have a drive connected to my airport, and I'm using it for my itunes library... simple enough... but recently i went poking about in the itunes music folder and many many many many of the folders that itunes is reading music from simply do n
-
I receive this error when installing CS6. All programs inatlled and are working correctly except for Acrobat
-
Ever since upgrading to OS X mavericks I get choppy audio on mainstage no matter what i/o latency settings are used. I started having the issue with mainstage 2 last night, and decided to upgrade to ms3 because I'd been wanting to for a while anyways
-
Very Easy Question: How to view source code of JAR file
Hi Experts, 1) Can we can see the content of JAR file? 2) How we can we see content of JAR file? 3) I have with me JAR file. It is sap.compcui_gpoadp~ObjectAndDataProvider.JAR. I have to make some changes in the JAR file source code. How I can find t