Exporting DV back to a Samsung VP-D351

Hi,
Could anyone tell me if they have been successful in exporting DV back to a Samsung VP-D351 camera within iMovie? I can transfer DV from the D351 to the iMac but after editing the movie I cannot copy it back to the camera, Ive tried all the suggestions on this forum and have had no luck. Ive Googled for the spec of the D351 and some sites state it has DV-in and some just state DV-out.
When I attempt to copy the movie back to the camera it goes through all the correct steps but my camera will not record, it just says STOP in the viewfinder, sometimes when I attempt it my iMac will completely crash requiring it to be switched off at the mains.
Many thanks for any help on this one,
Dave

Hi Sue,
Thanks for the quick reply!
In the manual it states:
Recording with a DV connection cable.
1.     Set the Power switch to player.
2.     Connect the DV cable from the DV jack of the camcorder to the DV jack of the other device.
     Make sure that DV is displayed on the LCD screen.
3.     Press the Start/Stop button to begin REC PAUSE mode.
     PAUSE is displayed on the LCD screen.
4.     Start playback on the other DV device while you monitor the picture.
5.     Press the Start/Stop button to start recording.
6.     Press the Start/Stop button to stop recording.
When I try this I do not get DV displayed on the LCD (as stated in step 2) and pressing the Start/Stop button has no affect, it just displays STOP on the blank LCD. Even though the manual clearly states the camera IS capable of recording in DV mode it doesnt, I wonder if this is a camera/iMovie compatibility issue?
Dave

Similar Messages

Import/Export in back stage view

What is the use of import/Export in back stage view of customize ribbon and Quick access toolbar

Shiv --
Pardon me for bumping into this thread. Here is a scenario that might answer your question:
You create a customized ribbon and Quick Access Toolbar. Your ribbon has a new tab called Initiate which contains the commands you use to initiate a new project, such as setting the Start date of the project, setting the Project and Nonworking Time
calendars, etc. Your customized Quick Access Toolbar contains the buttons you most frequently use, such as Zoom In, Zoom, Out, Scroll to Task, etc.
A fellow PM sees how you have customized the ribbon and Quick Access Toolbar in your copy of Microsoft Project and asks if you would give him/her the customizations.
You navigate to the Backstage and export your ribbon and Quick Access Toolbar customizations to an *.exportedUI file and you e-mail the customization file to your fellow PM.
Your fellow PM launches Microsoft Project, navigates to the Backstage, walks through the import process, and imports the ribbon and Quick Access Toolbar customizations from the customization file you sent him/her.
As Guillaume correctly points out, this is how to transfer ribbon and Quick Access Toolbar customizations from one computer to another, or from one user to another. One of the things I have done since Microsoft released the 2010 version Microsoft Project
is to give my students a customization file that has customizations they can use in the real world with their ribbon and Quick Access Toolbar. The export/import process is very easy, and very useful. Hope this extra helps.
Dale A. Howard [MVP]

How do I export photos back onto a camera SD card? I have created a desktop file for photos and SD card in Finder, dragged photos to card, but when I try to view them in the camera, it says "No valid photo to display"

How do I export photos back onto a camera SD card? I have created desktop files for the photos and the card, dragged photos to the card, but when I replace card in camera, it says "No valid photo to display". I just need to get some prints made and have been struggling with this for hours. Thank you.

No one can help you any more than has been done
Your camera is not a general purpuose photo display system - it is designed to take photos, let you look at those photos and allow you to download them to your computer or other places - if you wnat to use it view photos then you have to put the photos in exactly the correct place with exactly the correct names or it will not see them
And this has absolutely nothing to do with iPhoto in any way - iPhoto sotres and proecesses yoru photos and allows you to export them - once you export them it is totally out of the picture - you can easily get photo prints by using the iPhoto print service, using an internet print service, burning photos to a DVD and taking them to a print service or putting them on a SD card and taking them to a print service - to view them on your camera you have to exactly reporduce what the camera is looking for - not at all sure what the pirnt even is
LN

Animations to SWF Export, place back, make PDF: Acrobat XI?

I read that Flash runtime is not supported anymore in Acrobat XI. What does that mean for clients viewing PDF files that have placed SWF files and viewing them on computers that have no Flash player/plug-in installed? I have clients that export InDesign animations to SWF and place them back before making a PDF...

Please help me, how can i quit receiving thesemeseages from This In design forum?
Skickat från min iPad
16 okt 2012 kl. 14:59 skrev Vikrant Rai <[email protected]>:
Re: Animations to SWF Export, place back, make PDF: Acrobat XI?
created by Vikrant Rai in InDesign - View the full discussion
Acrobat informs viewers that Flash Player is required.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-4777766-243627/450-56/Flash_ne eded.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4777766#4777766
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4777766#4777766
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4777766#4777766. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Exporting/Rendering back and forth

I am exporting my project to Live Type, then I guess I must render within Live Type so I can export it back to Final Cut of which I will then export again for iDVD. Is this too much exporting and will I see any noticeable loss in quality?

pianoorlando,
If this is the same project you were working on last
night in the Live Type forum then don't render out of
Live Type. Simply save the Live Type project.
Go to FCP and import your saved LT file it will be an
.ipr file. When you put it in your timeline you can
render it once there. The big advantage of this
process though is that if you want to make changes to
the Live Type file you can control-clcik and "open in
editor" make the changes and it will automatically
update the changes in the file that you already
imported into FCP
Doug
Yes it is the same project, and I just realized I posted this in the wrong forum (I use FCE, not FCP). Will I still be able to do what you said in FCE?

I tried to sync Outlook 2011 with iCloud and it deleted all my calendar entries and now are only on iCloud and I cant figure out how to export them back to Outlook. Can anyone help me?

I signed up for iCloud today and tred to sync my Outlook 2011 calendar with it. At first, all the entries were completely deleted from Outlook but were still in iCal. Then I attempted to export my iCal events, turn off iCloud for calendars and import the iCal info to Outlook. But since it was only synced through iCloud nothing imported... now all my Outlook info is only on iCloud.. can anyone help me get it back on Outlook?

Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx

While experimenting my new iPod touch 8GO (4G) I lost all music that I had out in before... I tried to re-export the all iTune contain (music, movies, TV series...) back in iPod, but I can't ... How do I Export all back in iPod..?.

I don't know how to export all iTunes library back in iPod? Even when every time Iopen iTune the sychronisation is done automatically... But doesn't re-import all into iPod... I'm new at this so please bear with me... Help!!!

Whouuuuu !!!!!! Thank you...
What happend was that I uncheck the " the intire music library" box from the Sync music section ! OUPS !!!
Anyhow, Now thanks to you, i'll be able to listen to my new iPod , for my morning work out !!! thanks a million!!!
Have a fantastic day !
Isabelle !!!

Exporting camera back to CS4

Just wanted to know if it were possible to export a camera back from CS5 to CS4.
Basically I've exported a camera from 3ds max to AE (using max2ae), which is working fine, but I'm supplying a client with this camera so they can track live action footage over it. They're using CS4, and I'm on CS5.
Is there a simple fix for this?
It would save a lot of ball-ache.
Thanks guys!

You can't save projects for a previous version, but you can copy and paste information from one version to the next, with some fidelity. If you have After Effects CS4, also, try copying and pasting layers from After Effects CS5 to After Effects CS4 to transfer what you need.
You can also export keyframe data in text format, and you can then import it into a different version.

I made a slideshow on iphoto and exported it to itunes. The original on iphoto seems to have changed (all on its own)! and I want to export the original back to iphoto so that i can burn it to a dvd. How do I export it back?!!

I recently made a slideshow and exported it to itunes. The original slideshow that is saved in iphoto has changed, all on it's own!! The photos are different and in a different order.....not sure how that has happened! However, the one on itunes is how it should be and I want to get it back into iphoto so that I can burn it onto a dvd. Can someone tell me how to get my slideshow back into iphoto from itunes please? And any ideas why my original in iphoto has changed?!!! Many thanks.

I recently made a slideshow and exported it to itunes. The original slideshow that is saved in iphoto has changed, all on it's own!! The photos are different and in a different order.....not sure how that has happened! However, the one on itunes is how it should be and I want to get it back into iphoto so that I can burn it onto a dvd. Can someone tell me how to get my slideshow back into iphoto from itunes please? And any ideas why my original in iphoto has changed?!!! Many thanks.

Exporting library vs exporting masters // backing up

Hi there
Im just trying to export the highest possible resolution images so that I can make multiple back ups.
However, what is the difference between exporting a library, vs exporting masters?
When I export a library and I open it up again from an external hard drive the metadata says they are all RAW files, which is what I want. Is the damange in doing this is that I can then only ever open them up in Aperture?
What about DNG files, does aperture convert to dng?
Perhaps there are other aperture users that would like to share their backing up system because mine needs total re-doing
Thanks!
-Mollt

Your master files contain all the work you did in camera. They are your image files produced by the camera.
Your library contains all the work you did on the computer. Things like rating, edits, slideshows, albums, etc.
If you export the master files, you are only backing up the master files, not all the work you did on the computer.
To make a backup copy of your library, don't use export, use finder and make a copy from there (export works as well, but gives a new internal library ID so is not technically an exact copy). By making a copy, this backs up all the work you've done on your computer and probably your master files as well (see next comment).
You also need to understand the difference between Managed Files and Referenced Files. You decide this when you originally import the files into Aperture. By default, it will copy the images into the Aperture library (managed files), so when you copy the library, you are making a copy of both your images and all the work you did on the computer).
However, if, when importing, you chose not to store the image files in the library (Referenced files) then making a copy of the library only backs up the work you did on the computer, not your master files. So you'll need a backup copy of those too, either by copying the folder that contains them in finder, or by using Export Masters, or using your backup software.
Andy

Export clips back to i Movie project

Hi,
I'm trying to figure out how I can export parts of my iMovie dvd back into the iMovie project? I did not save the original copy on tape so I need to work with the dvd disc.
Thanks
Steve

You will need to convert the DVD files back to dv for iMovie.
Read Dan Slagle's advice here:
Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
And then get one or two of these helpful tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack Component:
http://www.apple.com/quicktime/mpeg2/
DVDxDV
http://www.dvdxdv.com/
Sue

Export firefox bookmarks to my Samsung tab 3

I`ve gone to tools in Firefox and setup sync "setup up now" and it was accepted. How do i now export my Firefox bookmarks over to my Tablet please?

Thanks, but i can`t find the code on the device. I click on "Show me how" and it takes me back to the instructions. see attached please.

Exporting project back to tape

I like to backup any DvD's I make by exporting the finished project to a Mini DV.
How can I do this with IMovie 8? Thank You.

No

Exporting pics back to iphone

If I import all my pics from iphone to iphoto and then in the future want to export some of the pictures to store on my iphone.....
How is that done? easily?
Janice

wjosten wrote:
janicestar wrote:
How is that done? easily?
Janice
Just follow the directions here:
http://support.apple.com/kb/ht4236
As already provided:
By using iTunes.
Connect your phone to iTunes on your computer.
Go to the Photos tab.
Select the photos to sync, then click 'Apply'.

The Bold Text on Exports is BACK - HELP

Extremely frustrated. I am trying to export a PDF of my script and when I do, portions of the text are BOLDED. I have not bolded anything in the script, nor have I ever bolded anything.
Previously, Adobe staff helped me work around this glitch by "Adding a revision mark" into the script, and then "Clearing revision marks" (in the production tab). After I did that, the script was able to export Bold-Free. However, the bolding is now happeneing again, and for some reason I am unable to add script revision marks at all, whether I am in a Script Revision or not.
ADOBE PLEASE HELP ME!!!! I need to export my script for a client NOW.
This was my previous thread here: http://forums.adobe.com/thread/1058289?tstart=0

Figured out this bizarre workaround. (just in case any other unfortunate Story user is running in to this)
In the script: "Select All" (make sure all text in the script is highlighted) > THEN you can: Production>Clear Revision Marks
This "clears revision marks" in the script (even though I didn't have any). Once I export after that point, the Boldness is gone. Sheesh. What a lame program.

Exporting DV back to a Samsung VP-D351

Similar Messages

Maybe you are looking for